The divBasic function computes the quotient of big nats u/v word by word.
It estimates each word qhat by performing a long division (top 2 words of u
divided by top word of v), looks at the next word to correct the estimate,
then perform a full multiplication (qhat*v) to catch any inaccuracy in the
estimate.
In the latter case, "negative" values appear temporarily and carries
must be carefully managed, and the recursive division refactoring
introduced a case where qhat*v has the same length as v, triggering an
out-of-bounds write in the case it happens when computing the top word
of the quotient.
Fixes#37501
Change-Id: I15089da4a4027beda43af497bf6de261eb792f94
Reviewed-on: https://go-review.googlesource.com/c/go/+/221980
Reviewed-by: Robert Griesemer <gri@golang.org>
(cherry picked from commit ac1fd419b6)
Reviewed-on: https://go-review.googlesource.com/c/go/+/227877
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, we extract module zip files to temporary directories, then
atomically rename them into place. On Windows, this can fail with
ERROR_ACCESS_DENIED if another process (antivirus) has files open
before the rename. In CL 220978, we repeated the rename operation in a
loop over 500 ms, but this didn't solve the problem for everyone.
A better solution will extract module zip files to their permanent
locations in the cache and will keep a ".partial" marker file,
indicating when a module hasn't been fully extracted (CL 221157).
This approach is not safe if current versions of Go access the module
cache concurrently, since the module directory is detected with a
single os.Stat.
In the interim, this CL makes two changes:
1. Flaky file system operations are repeated over 2000 ms to reduce
the chance of this error occurring.
2. cmd/go will now check for .partial files created by future
versions. If a .partial file is found, it will lock the lock file,
then remove the .partial file and directory if needed.
After some time has passed and Go versions lacking this CL are no
longer supported, we can start extracting module zip files in place.
Updates #37800
Change-Id: I467ee11aa59a90b63cf0e3e761c4fec89d57d3b6
Reviewed-on: https://go-review.googlesource.com/c/go/+/221820
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
(cherry picked from commit 093049b370)
Reviewed-on: https://go-review.googlesource.com/c/go/+/223147
materializeGCProg allocates a temporary buffer for unrolling a GC
program. Unfortunately, when computing the size of the buffer, it
rounds *down* the number of bytes needed to store bitmap before
rounding up the number of pages needed to store those bytes. The fact
that it rounds up to pages usually mitigates the rounding down, but
the type from #37470 exists right on the boundary where this doesn't
work:
type Sequencer struct {
htable [1 << 17]uint32
buf []byte
}
On 64-bit, this GC bitmap is exactly 8 KiB of zeros, followed by three
one bits. Hence, this needs 8193 bytes of storage, but the current
math in materializeGCProg rounds *down* the three one bits to 8192
bytes. Since this is exactly pageSize, the next step of rounding up to
the page size doesn't mitigate this error, and materializeGCProg
allocates a buffer that is one byte too small. runGCProg then writes
one byte past the end of this buffer, causing either a segfault (if
you're lucky!) or memory corruption.
Updates #37470.
Fixes#37480.
Change-Id: Iad24c463c501cd9b1dc1924bc2ad007991a094a0
Reviewed-on: https://go-review.googlesource.com/c/go/+/224417
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
gentraceback generates PCs which are usually following the CALL
instruction. For those that aren't, it fixes up the PCs so that
functions processing the output can unconditionally decrement the PC.
runtime_expandInlineFrames does this unconditional decrement when
looking up the function. However, the fake stack frame generated for
overflow records fails to meet the contract, and decrementing the PC
results in a PC in the previous function. If that function contains
inlined call, runtime_expandInlineFrames will not short-circuit and will
panic trying to look up a PC that doesn't exist.
Note that the added test does not fail at HEAD. It will only fail (with
a panic) if the function preceeding lostProfileEvent contains inlined
function calls. At the moment (on linux/amd64), that is
runtime/pprof.addMaxRSS, which does not.
Fixes#38118
Change-Id: Iad0819f23c566011c920fd9a5b1254719228da0b
Reviewed-on: https://go-review.googlesource.com/c/go/+/225661
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
(cherry picked from commit 4a8b9bd264)
Reviewed-on: https://go-review.googlesource.com/c/go/+/226077
CL 181857 broke the translation of certain C types using cmd/cgo -godefs
because it stores each typedef, array and qualified type with their
parent type name in the translation cache.
Fix this by only considering the parent type for typedefs of anonymous
structs which is the only case where types might become ambiguous.
Fixes#37622
Change-Id: I301a749ec89585789cb0d213593bb8b7341beb88
Reviewed-on: https://go-review.googlesource.com/c/go/+/226341
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
(cherry picked from commit a265c2c448)
Reviewed-on: https://go-review.googlesource.com/c/go/+/226497
Builds upon the changes from #32000 which supported sourcing environment
variables for a new process from the environment of a Windows user token
when supplied.
But due to the logic of os/exec, the Env field of a process was
always non-nil when it reached that change.
This change moves the logic up to os/exec, specifically when
os.ProcAttr is being built for the os.StartProcess call, this
ensures that if a user token has been supplied and no Env slice has
been provided on the command it will be sourced from the user's
environment.
If no token is provided, or the program is compiled for any other
platform than Windows, the default environment will be sourced from
syscall.Environ().
For #35314Fixes#37471
Change-Id: I4c1722e90b91945eb6980d5c5928183269b50487
GitHub-Last-Rev: 32216b7291
GitHub-Pull-Request: golang/go#37402
Reviewed-on: https://go-review.googlesource.com/c/go/+/220587
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
(cherry picked from commit e0c3ded337)
Reviewed-on: https://go-review.googlesource.com/c/go/+/226281
Currently, the capping logic for the GC trigger ratio is such that if
gcpercent is low, we may end up setting the trigger ratio far too high,
breaking the promise of SetGCPercent and GOGC has a trade-off knob (we
won't start a GC early enough, and we will use more memory).
This change modifies the capping logic for the trigger ratio by scaling
the minTriggerRatio with gcpercent the same way we scale
maxTriggerRatio.
For #37927.
Fixes#37928.
Change-Id: I2a048c1808fb67186333d3d5a6bee328be2f35da
Reviewed-on: https://go-review.googlesource.com/c/go/+/223937
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
(cherry picked from commit d1ecfcc1e8)
Reviewed-on: https://go-review.googlesource.com/c/go/+/225637
Reviewed-by: David Chase <drchase@google.com>
Appending to a global slice is only safe if its length is already
equal to its capacity. That property is not guaranteed for slices in
general, and empirically does not hold for this one.
This is a minimal fix to make it easier to backport.
A more robust cleanup of the base.EnvForDir function will be sent in a
subsequent CL.
Fixes#38083
Updates #38077
Change-Id: I731d5bbd0e516642c2cf43e713eeea15402604e5
Reviewed-on: https://go-review.googlesource.com/c/go/+/225577
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
(cherry picked from commit bfb1342a40)
Reviewed-on: https://go-review.googlesource.com/c/go/+/225659
Currently if a goroutine is preempted while owning a timer in the
timerModifying state, it could self-deadlock. When the goroutine is
preempted and calls into the scheduler, it could call checkTimers. If
checkTimers encounters the timerModifying timer and calls runtimer on
it, then runtimer will spin, waiting for that timer to leave the
timerModifying state, which it never will.
So far we got lucky that for the most part that there were no preemption
points while timerModifying is happening, however CL 221077 seems to
have introduced one, leading to sporadic self-deadlocks.
This change disables preemption explicitly while a goroutines holds a
timer in timerModifying. Since only checkTimers (and thus runtimer) is
called from the scheduler, this is sufficient to prevent
preemption-based self-deadlocks.
For #38070Fixes#38072
Change-Id: Idbfac310889c92773023733ff7e2ff87e9896f0c
Reviewed-on: https://go-review.googlesource.com/c/go/+/225497
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
(cherry picked from commit e8be350d78)
Reviewed-on: https://go-review.googlesource.com/c/go/+/225521
Run-TryBot: Ian Lance Taylor <iant@golang.org>
The callers expect negative errno values, so negate them when necessary.
No test because there is no reasonable way to make pipe/pipe2 fail.
This was reported on a system on which pipe2 returned ENOSYS.
For #37997Fixes#38005
Change-Id: I3ad6cbbc2521cf495f8df6ec991a3f781122b508
Reviewed-on: https://go-review.googlesource.com/c/go/+/224592
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
(cherry picked from commit 20b46c7c69)
Reviewed-on: https://go-review.googlesource.com/c/go/+/225419
It appears that PowerRegisterSuspendResumeNotification is not supported
when running inside Docker - see issues #35447, #36557 and #37149.
Our current code relies on error number to determine Docker environment.
But we already saw PowerRegisterSuspendResumeNotification return
ERROR_FILE_NOT_FOUND, ERROR_INVALID_PARAMETERS and ERROR_ACCESS_DENIED
(see issues above). So this approach is not sustainable.
Just ignore PowerRegisterSuspendResumeNotification returned error.
For #37149Fixes#37699
Change-Id: I2beba9d45cdb8c1efac5e974e747827a6261915a
Reviewed-on: https://go-review.googlesource.com/c/go/+/219657
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
(cherry picked from commit d467f3bbc9)
Reviewed-on: https://go-review.googlesource.com/c/go/+/224586
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reduce the length of time that other timer functions can see timerModifying.
In particular avoid system calls.
For #38023Fixes#38051
Change-Id: I1b61229c668e6085d9ee6dca9488a90055386c36
Reviewed-on: https://go-review.googlesource.com/c/go/+/224902
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
(cherry picked from commit 355f53f0a0)
Reviewed-on: https://go-review.googlesource.com/c/go/+/225277
newdefer() actually adds the new defer to the current g's defer chain. That
happens even if we are on the system stack, in which case the g will be the g0
stack. For open-coded defers, we call newdefer() (only during panic processing)
while on the system stack, so the new defer is unintentionally added to the
g0._defer defer list. The code later correctly adds the defer to the user g's
defer list.
The g0._defer list is never used. However, that pointer on the g0._defer list can
keep a defer struct alive that is intended to be garbage-collected (smaller defers
use a defer pool, but larger-sized defer records are just GC'ed). freedefer() does
not zero out pointers when it intends that a defer become garbage-collected. So,
we can have the pointers in a defer that is held alive by g0._defer become invalid
(in particular d.link). This is the cause of the bad pointer bug in this issue
The fix is to change newdefer (only used in two places) to not add the new defer
to the gp._defer list. We just do it after the call with the correct gp pointer.
(As mentioned above, this code was already there after the newdefer in
addOneOpenDeferFrame.) That ensures that defers will be correctly
garbage-collected and eliminate the bad pointer.
This fix definitely fixes the original repro. I added a test and tried hard to
reproduce the bug (based on the original repro code), but awasn't actually able to
cause the bug. However, the test is still an interesting mix of heap-allocated,
stack-allocated, and open-coded defers.
For #37688Fixes#37968Fixes#37688
Change-Id: I1a481b9d9e9b9ba4e8726ef718a1f4512a2d6faf
Reviewed-on: https://go-review.googlesource.com/c/go/+/224581
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
(cherry picked from commit 825ae71e56)
Reviewed-on: https://go-review.googlesource.com/c/go/+/225279
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
This CL fixes a race condition if there are two subtests, and
one finishing but the other is panicking.
For #37551Fixes#37959
Change-Id: Ic33963eb338aec228964b95f7c34a0d207b91e00
Reviewed-on: https://go-review.googlesource.com/c/go/+/221322
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
(cherry picked from commit 93a9561b23)
Reviewed-on: https://go-review.googlesource.com/c/go/+/224257
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Changkun Ou <euryugasaki@gmail.com>
If multiple threads call preemptone to preempt the same M, it may
send many signals to the same M such that it hardly make
progress, causing live-lock problem. Only send a signal if there
isn't already one pending.
Updates #37741.
Fixes#37833.
Change-Id: Id94adb0b95acbd18b23abe637a8dcd81ab41b452
Reviewed-on: https://go-review.googlesource.com/c/go/+/223737
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
(cherry picked from commit 0c0e8f224d)
Reviewed-on: https://go-review.googlesource.com/c/go/+/223939
Reviewed-by: Austin Clements <austin@google.com>
Instead, note that mlock has failed, start trying the mitigation of
touching the signal stack before sending a preemption signal, and,
if the program crashes, mention the possible problem and a wiki page
describing the issue (https://golang.org/wiki/LinuxKernelSignalVectorBug).
Tested on a kernel in the buggy version range, but with the patch,
by using `ulimit -l 0`.
For #37436Fixes#37807
Change-Id: I072aadb2101496dffd655e442fa5c367dad46ce8
Reviewed-on: https://go-review.googlesource.com/c/go/+/223121
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
(cherry picked from commit b851e51160)
Reviewed-on: https://go-review.googlesource.com/c/go/+/223417
TryBot-Result: Gobot Gobot <gobot@golang.org>
In the open-code defer implementation, we add defer struct entries to the defer
chain on-the-fly at panic time to represent stack frames that contain open-coded
defers. This allows us to process non-open-coded and open-coded defers in the
correct order. Also, we need somewhere to be able to store the 'started' state of
open-coded defers. However, if a recover succeeds, defers will now be processed
inline again (unless another panic happens). Any defer entry representing a frame
with open-coded defers will become stale once we run the corresponding defers
inline and exit the associated stack frame. So, we need to remove all entries for
open-coded defers at recover time.
The current code was only removing the top-most open-coded defer from the defer
chain during recovery. However, with recursive functions that do repeated
panic-recover-repanic, multiple stale entries can accumulate on the chain. So, we
just adjust the loop to process the entire chain. Since this is at panic/recover
case, it is fine to scan through the entire chain (which should usually have few
elements in it, since most defers are open-coded).
The added test fails with a SEGV without the fix, because it tries to run a stale
open-code defer entry (and the stack has changed).
Updates #37664.
Fixes#37782.
Change-Id: I8e3da5d610b5e607411451b66881dea887f7484d
Reviewed-on: https://go-review.googlesource.com/c/go/+/222420
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
(cherry picked from commit fae87a2223)
Reviewed-on: https://go-review.googlesource.com/c/go/+/222818
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
If typehash (used by reflect) does not match the built-in map's hash,
then problems occur. If a map is built using reflect, and then
assigned to a variable of map type, the hash function can change. That
causes very bad things.
This issue is rare. MapOf consults a cache of all types that occur in
the binary before making a new one. To make a true new map type (with
a hash function derived from typehash) that map type must not occur in
the binary anywhere. But to cause the bug, we need a variable of that
type in order to assign to it. The only way to make that work is to
use a named map type for the variable, so it is distinct from the
unnamed version that MapOf looks for.
Fixes#37721
Change-Id: I3537bfceca8cbfa1af84202f432f3c06953fe0ed
Reviewed-on: https://go-review.googlesource.com/c/go/+/222357
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
(cherry picked from commit 2b8e60d464)
Reviewed-on: https://go-review.googlesource.com/c/go/+/222778
Interfaces often contain pointers. Implement a fast path for this case.
name old time/op new time/op delta
MapInterfaceString-16 21.4ns ±19% 20.5ns ±10% ~ (p=0.361 n=10+10)
MapInterfacePtr-16 25.8ns ± 8% 17.3ns ± 7% -33.11% (p=0.000 n=10+9)
We need this CL as well to fix 37721.
Update #37721Fixes#37613
Change-Id: Ice52820e6259a3edeafcbbbeb25b1e363bef00d0
Reviewed-on: https://go-review.googlesource.com/c/go/+/219338
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
(cherry picked from commit afd691c579)
Reviewed-on: https://go-review.googlesource.com/c/go/+/222779
Run-TryBot: Alexander Rakoczy <alex@golang.org>
When generating stacks, the runtime automatically expands inline
functions to inline all inline frames in the stack. However, due to the
stack size limit, the final frame may be truncated in the middle of
several inline frames at the same location.
As-is, we assume that the final frame is a normal function, and emit and
cache a Location for it. If we later receive a complete stack frame, we
will first use the cached Location for the inlined function and then
generate a new Location for the "caller" frame, in violation of the
pprof requirement to merge inlined functions into the same Location.
As a result, we:
1. Nondeterministically may generate a profile with the different stacks
combined or split, depending on which is encountered first. This is
particularly problematic when performing a diff of profiles.
2. When split stacks are generated, we lose the inlining information.
We avoid both of these problems by performing a second expansion of the
last stack frame to recover additional inline frames that may have been
lost. This expansion is a bit simpler than the one done by the runtime
because we don't have to handle skipping, and we know that the last
emitted frame is not an elided wrapper, since it by definition is
already included in the stack.
Fixes#37447
Change-Id: If3ca2af25b21d252cf457cc867dd932f107d4c61
Reviewed-on: https://go-review.googlesource.com/c/go/+/221577
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
(cherry picked from commit fadbf7404d)
Reviewed-on: https://go-review.googlesource.com/c/go/+/222762
'go test -json' should report that a test failed if the test binary
did not exit normally with status 0. This covers panics, non-zero
exits, and abnormal terminations.
These tests don't print a final result when run with -test.v (which is
used by 'go test -json'). The final result should be "PASS" or "FAIL"
on a line by itself. 'go test' prints "FAIL" in this case, but
includes error information.
test2json was changed in CL 192104 to report that a test passed if it
does not report a final status. This caused 'go test -json' to report
that a test passed after a panic or non-zero exit.
With this change, test2json treats "FAIL" with error information the
same as "FAIL" on a line by itself. This is intended to be a minimal
fix for backporting, but it will likely be replaced by a complete
solution for #29062.
Fixes#37671
Updates #37555
Updates #29062
Updates #31969
Change-Id: Icb67bcd36bed97e6a8d51f4d14bf71f73c83ac3d
Reviewed-on: https://go-review.googlesource.com/c/go/+/222243
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
(cherry picked from commit 5ea58c6346)
Reviewed-on: https://go-review.googlesource.com/c/go/+/222658
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Old trace viewer stopped working with Chrome M80+ because the
old trace viewer heavily depended on WebComponents V0 which are deprecated.
Trace viewer recently migrated to use WebComponents V0 polyfill
(crbug.com/1036492). This CL brings in the newly updated trace_viewer_full.html
(sync'd @ 9508452e)
and updates the javascript snippet included in the /trace endpoint
to use the polyfill.
This brings in webcomponents.min.js copied from
https://chromium.googlesource.com/catapult/+/9508452e18f130c98499cb4c4f1e1efaedee8962/third_party/polymer/components/webcomponentsjs/webcomponents.min.js
That is necessary because the /trace endpoint needs to import
the vulcanized trace_viewer_full.html.
It's possible that some features are not working correctly with
this polyfill. In that case, report the issue to crbug.com/1036492.
There will be a warning message in the UI (yellow banner above the timeline)
which can be hidden by clicking the 'hide' button.
This allows to render the trace in browsers other than chrome in theory,
but I observed some buttons and functions still don't work outside
chrome.
Updates #34374.
Fixes#37343.
Change-Id: I0f369b15349dd0f4718c261ec23dfab6a47ace2f
Reviewed-on: https://go-review.googlesource.com/c/go/+/219997
Run-TryBot: Hyang-Ah Hana Kim <hyangah@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
(cherry picked from commit 75ea964b3f)
Reviewed-on: https://go-review.googlesource.com/c/go/+/220323
In CL 219131 we inserted a VZEROUPPER instruction on darwin/amd64.
The instruction is not available on pre-AVX machines. Guard it
with CPU feature.
Updates #37459.
Fixes#37478.
Change-Id: I9a064df277d091be4ee594eda5c7fd8ee323102b
Reviewed-on: https://go-review.googlesource.com/c/go/+/221057
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
(cherry picked from commit c46ffdd2ec)
Reviewed-on: https://go-review.googlesource.com/c/go/+/221058
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
If we see a racy use of timers, as in concurrent calls to Timer.Reset,
do the operations in an unpredictable order, rather than crashing.
Updates #37400
Updates #37449Fixes#37494
Change-Id: Idbac295df2dfd551b6d762909d5040fc532c1b34
Reviewed-on: https://go-review.googlesource.com/c/go/+/221077
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
(cherry picked from commit 98858c4380)
Reviewed-on: https://go-review.googlesource.com/c/go/+/221298
As far as I can tell, there is no public documentation on this topic,
which cost me several days of debugging.
I am possibly unusual in that I run binaries in production with the
race detector turned on, but I think that others who do the same may
want to be aware of the risk.
Updates #26813.
Updates #37233.
Change-Id: I1f8111bd01d0000596e6057b7cb5ed017d5dc655
Reviewed-on: https://go-review.googlesource.com/c/go/+/220586
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
(cherry picked from commit ba093c4562)
Reviewed-on: https://go-review.googlesource.com/c/go/+/221019
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Adding a link to this guide will provide more value to instructing Go
users to migrate to modules.
Updates #36878
Change-Id: Ie6ab45efcd35cc5e5ba5adc16ba0ca4cca4292bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/220906
Run-TryBot: Alexander Rakoczy <alex@golang.org>
Reviewed-by: thepudds <thepudds1460@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
(cherry picked from commit 8e2dad5529)
Reviewed-on: https://go-review.googlesource.com/c/go/+/220981
Reviewed-by: Carlos Amedee <carlos@golang.org>
Use consistent indentation for one of the paragraphs.
Include issue number in the visible text, so it is easier to read.
Updates #36878
Change-Id: Iab857b26b1d27b0137e981126207089db108d530
Reviewed-on: https://go-review.googlesource.com/c/go/+/220646
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Alexander Rakoczy <alex@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
(cherry picked from commit 1c0d664128)
Reviewed-on: https://go-review.googlesource.com/c/go/+/220650
Hash initializes seed on the first usage of seed or state with initSeed.
initSeed uses SetSeed which discards accumulated data.
This causes hash to return different sums for the same data in the first use
and after reset.
This CL fixes this issue by separating the seed set from data discard.
Updates #37315
Change-Id: Ic7020702c2ce822eb700af462e37efab12f72054
GitHub-Last-Rev: 48b2f963e8
GitHub-Pull-Request: golang/go#37328
Reviewed-on: https://go-review.googlesource.com/c/go/+/220259
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
(cherry picked from commit 638df87fa4)
Reviewed-on: https://go-review.googlesource.com/c/go/+/220617
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
This update was automatically generated using the updatecontrib command:
cd gotip
go run golang.org/x/build/cmd/updatecontrib
With minor manual changes based on publicly available information
to canonicalize letter case and formatting for a few names.
Actions taken (relative to CONTRIBUTORS at origin/master):
Added Aaron Bieber <deftly@gmail.com>
Added Adam Williams <pwnfactory@gmail.com>
Added Ayke van Laethem <aykevanlaethem@gmail.com>
Added Bradford Lamson-Scribner <brad.lamson@gmail.com>
Added Brian Falk <falk@logicparty.org>
Added Chen Zhihan <energiehund@gmail.com>
Added Christopher Loessl <cloessl+github@gmail.com>
Added Frederik Zipp <fzipp@gmx.de>
Added Fujimoto Kyosuke <kyoro.f@gmail.com>
Added GitHub User jopbrown (6345470) <msshane2008@gmail.com>
Added GitHub User yah01 (12216890) <kagaminehuan@gmail.com>
Added Hiromichi Ema <ema.hiro@gmail.com>
Added Jamal Carvalho <jamal.a.carvalho@gmail.com>
Added Jason Baker <jason-baker@users.noreply.github.com>
Added Kanta Ebihara <kantaebihara@gmail.com>
Added Kirill Tatchihin <kirabsuir@gmail.com>
Added Kévin Dunglas <dunglas@gmail.com>
Added Mariano Cano <mariano@smallstep.com>
Added Sergey Ivanov <ser1325@gmail.com>
Added Thomas Symborski <thomas.symborski@gmail.com>
Added Tomohiro Kusumoto <zabio1192@gmail.com>
Added Xingqang Bai <bxq2011hust@qq.com>
Used GitHub User jopbrown (6345470) form for jopbrown <msshane2008@gmail.com> https://github.com/golang/exp/commit/0405dc7 [exp]
Used GitHub User yah01 (12216890) form for yah01 <kagaminehuan@gmail.com> https://github.com/golang/go/commit/ee55dd6b64 [go]
Used GitHub name "Hiromichi Ema" for emahiro <ema.hiro@gmail.com> https://github.com/golang/tools/commit/b6336cbc [tools]
Used GitHub name "Jamal Carvalho" for Gopher <jamal.a.carvalho@gmail.com> https://github.com/golang/gddo/commit/31dd61d [gddo]
Used GitHub name "Xingqang Bai" for bxq2011hust <bxq2011hust@qq.com> https://github.com/golang/go/commit/79ccbe1b67 [go]
Updates #12042
Change-Id: I13f8ab37f8b38f8f5d0ff71c939ad39d0bc4f985
Reviewed-on: https://go-review.googlesource.com/c/go/+/220363
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Run-TryBot: Alexander Rakoczy <alex@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-on: https://go-review.googlesource.com/c/go/+/220368
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It might break a program if it was depending on undocumented behavior.
Give a proper heads up.
Updates #37308.
Change-Id: Id65bc70def1138d5506b694329c52250b417ec6f
Reviewed-on: https://go-review.googlesource.com/c/go/+/220418
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-on: https://go-review.googlesource.com/c/go/+/220367
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
1cd724acb6 doc/go1.14: highlight the addition of hash/maphash package
a0cf2c872f doc/go1.14: remove TODO comment for CL 200439
a9ea91d571 cmd/link, runtime: skip holes in func table
88e564edb1 doc/go1.14: add missing period at sentence end
6917529cc6 testing: remove obsolete comment in testing.(*T) docs
Change-Id: Ifb581c251474e9445d65a4f34dd4dcbc469fdd79
Given that it's a package that did not exist before, was a proposal
in issue #28322, got accepted and implemented for 1.14, it seems to
be more than a minor change to the library. Highlight it accordingly.
Also specify the results are 64-bit integers, as done in CL 219340.
Updates #36878
Updates #28322
Change-Id: Idefe63d4c47a02cdcf8be8ab08c40cdb94ff2098
Reviewed-on: https://go-review.googlesource.com/c/go/+/219877
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Toshihiro Shiino <shiino.toshihiro@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
On PPC64 when external linking, for large binaries we split the
text section to multiple sections, so the external linking may
insert trampolines between sections. These trampolines are within
the address range covered by the func table, but not known by Go.
This causes runtime.findfunc to return a wrong function if the
given PC is from such trampolines.
In this CL, we generate a marker between text sections where
there could potentially be a hole in the func table. At run time,
we skip the hole if we see such a marker.
Fixes#37216.
Change-Id: I95ab3875a84b357dbaa65a4ed339a19282257ce0
Reviewed-on: https://go-review.googlesource.com/c/go/+/219717
Reviewed-by: David Chase <drchase@google.com>
Rémy Oudompheng
Ian Lance Taylor
Andrew Bonventre
Jay Conrod
Austin Clements
Carlos Amedee
Michael Pratt
Keith Randall
Tobias Klauser
Liam 'Auzzie' Haworth
Michael Anthony Knyszek
Bryan C. Mills
Alex Brainman
Dan Scales
Changkun Ou
Cherry Zhang
Stefan Baebler
Hana (Hyang-Ah) Kim
Kevin Burke
Alexander Rakoczy
Dmitri Shuralyov
Katie Hockman
vovapi
Daniel Martí
Alberto Donizetti