Remove -Zinline-in-all-cgus and clean up tests/codegen-units/
Implementation of https://github.com/rust-lang/compiler-team/issues/814
I've taken some liberties with cleaning up the CGU partitioning tests, because that's the only place this flag was used and also mattered. I've often fought a lot with the contents of `tests/codegen-units` and it has never been clear to me when a test failure indicates a problem with my changes as opposed to a test just needing to be manually blessed. Hopefully the combination of the new README, new comments, and using `-Zprint-mono-items=lazy` in the partitioning tests improves that.
I've also deleted some of the `tests/run-make/sepcomp` tests. I think all the "sepcomp" tests have been obviated for years by better-designed (less flaky, clearer failures) test suites, but here I'm just deleting the ones I'm confident in.
Windows x86: Change i128 to return via the vector ABI
Clang and GCC both return `i128` in xmm0 on windows-msvc and windows-gnu. Currently, Rust returns the type on the stack. Add a calling convention adjustment so we also return scalar `i128`s using the vector ABI, which makes our `i128` compatible with C.
In the future, Clang may change to return `i128` on the stack for its `-msvc` targets (more at [1]). If this happens, the change here will need to be adjusted to only affect MinGW.
Link: https://github.com/rust-lang/rust/issues/134288 (does not fix) [1]
try-job: x86_64-msvc
try-job: x86_64-msvc-ext1
try-job: x86_64-mingw-1
try-job: x86_64-mingw-2
Add some tracing to core bootstrap logic
Follow-up to #135391.
### Summary
Add some initial tracing logging to bootstrap, focused on the core logic (in this PR).
Also:
- Adjusted tracing-tree style to not use indent lines (I found that more distracting than helpful).
- Avoid glob-importing `tracing` items.
- Improve the rustc-dev-guide docs on bootstrap tracing.
### Example output
```bash
$ BOOTSTRAP_TRACING=bootstrap=TRACE ./x check src/bootstrap
```
r? bootstrap
compiler_fence: fix example
The old example was wrong, an acquire fence is required in the signal handler. To make the point more clear, I changed the "data" variable to use non-atomic accesses.
Fixes https://github.com/rust-lang/rust/issues/133014
Fix tests on LLVM 20
For sparcv8plus.rs, duplicate the test for LLVM 19 and LLVM 20. LLVM 20 resolves one of the FIXME in the test.
For x86_64-bigint-add.rs split the check lines for LLVM 19 and LLVM 20. The difference in codegen here is due to a difference in unroll factor, which I believe is not what the test is interested in.
Fixes https://github.com/rust-lang/rust/issues/132957.
Fixes https://github.com/rust-lang/rust/issues/133754.
Get rid of `mir::Const::from_ty_const`
This function is strange, because it turns valtrees into `mir::Const::Value`, but the rest of the const variants stay as type system consts.
All of the callsites except for one in `instsimplify` (array length simplification of `ptr_metadata` call) just go through the valtree arm of the function, so it's easier to just create a `mir::Const` directly for those.
For the instsimplify case, if we have a type system const we should *keep* having a type system const, rather than turning it into a `mir::Const::Value`; it doesn't really matter in practice, though, bc `usize` has no padding, but it feels more principled.
Reword resolve errors caused by likely missing crate in dep tree
Reword label and add `help`:
```
error[E0432]: unresolved import `some_novel_crate`
--> f704.rs:1:5
|
1 | use some_novel_crate::Type;
| ^^^^^^^^^^^^^^^^ use of unresolved module or unlinked crate `some_novel_crate`
|
= help: if you wanted to use a crate named `some_novel_crate`, use `cargo add some_novel_crate` to add it to your `Cargo.toml`
```
Fix#133137.
Add `#[optimize(none)]`
cc #54882
This extends the `optimize` attribute to add `none`, which corresponds to the LLVM `OptimizeNone` attribute.
Not sure if an MCP is required for this, happy to file one if so.
Update cargo
5 commits in 045bf21b36a2e1f3ed85e38278d1c3cc4305e134..cecde95c119a456c30e57d3e4b31fff5a7d83df4
2025-01-17 14:59:36 +0000 to 2025-01-24 17:15:24 +0000
- Remove unused `-C link-arg=-fuse-ld=lld` (rust-lang/cargo#15097)
- Remove `unsafe` by using `LazyLock` (rust-lang/cargo#15096)
- Print globs when workspace members can't be found (rust-lang/cargo#15093)
- Make --allow-dirty imply --allow-staged (rust-lang/cargo#15013)
- fix(config): When merging, replace rather than combining specific configuration keys (rust-lang/cargo#15066)
Rollup of 9 pull requests
Successful merges:
- #135415 (Add `File already exists` error doc to `hard_link` function)
- #135581 (Separate Builder methods from tcx)
- #135728 (document order of items in iterator from drain)
- #135749 (Do not assume const params are printed after type params)
- #135829 (Rustc dev guide subtree update)
- #135938 (Add memory layout documentation to generic NonZero<T>)
- #135949 (Use short type string in E0308 secondary span label)
- #135976 (Don't drop types with no drop glue when building drops for tailcalls)
- #135998 ([rustdoc] Fix indent of trait items on mobile)
r? `@ghost`
`@rustbot` modify labels: rollup
Don't drop types with no drop glue when building drops for tailcalls
this is required as otherwise drops of `&mut` refs count as a usage of a
'two-phase temporary' causing an ICE.
fixes#128097
The underlying issue is that the current code generates drops for `&mut` which are later counted as a second use of a two-phase temporary:
`bat t.rs -p`
```rust
#![expect(incomplete_features)]
#![feature(explicit_tail_calls)]
fn f(x: &mut ()) {
let _y = String::new();
become f(x);
}
fn main() {}
```
`rustc t.rs -Zdump_mir=f`
```text
error: internal compiler error: compiler/rustc_borrowck/src/borrow_set.rs:298:17: found two uses for 2-phase borrow temporary _4: bb2[1] and bb3[0]
--> t.rs:6:5
|
6 | become f(x);
| ^^^^^^^^^^^
thread 'rustc' panicked at compiler/rustc_borrowck/src/borrow_set.rs:298:17:
Box<dyn Any>
stack backtrace:
[REDACTED]
error: aborting due to 1 previous error
```
`bat ./mir_dump/t.f.-------.renumber.0.mir -p -lrust`
```rust
// MIR for `f` 0 renumber
fn f(_1: &mut ()) -> () {
debug x => _1;
let mut _0: ();
let mut _2: !;
let _3: std::string::String;
let mut _4: &mut ();
scope 1 {
debug _y => _3;
}
bb0: {
StorageLive(_3);
_3 = String::new() -> [return: bb1, unwind: bb4];
}
bb1: {
FakeRead(ForLet(None), _3);
StorageLive(_4);
_4 = &mut (*_1);
drop(_3) -> [return: bb2, unwind: bb3];
}
bb2: {
StorageDead(_3);
tailcall f(Spanned { node: move _4, span: t.rs:6:14: 6:15 (#0) });
}
bb3 (cleanup): {
drop(_4) -> [return: bb4, unwind terminate(cleanup)];
}
bb4 (cleanup): {
resume;
}
}
```
Note how `_4 is moved into the tail call in `bb2` and dropped in `bb3`.
This PR adds a check that the locals we drop need dropping.
r? `@oli-obk` (feel free to reassign, I'm not sure who would be a good reviewer, but thought you might have an idea)
cc `@beepster4096,` since you wrote the original drop implementation.
Use short type string in E0308 secondary span label
We were previously printing the full type on the "this expression has type" label.
```
error[E0308]: mismatched types
--> $DIR/secondary-label-with-long-type.rs:8:9
|
LL | let () = x;
| ^^ - this expression has type `((..., ..., ..., ...), ..., ..., ...)`
| |
| expected `((..., ..., ..., ...), ..., ..., ...)`, found `()`
|
= note: expected tuple `((..., ..., ..., ...), ..., ..., ...)`
found unit type `()`
= note: the full type name has been written to '$TEST_BUILD_DIR/diagnostic-width/secondary-label-with-long-type/secondary-label-with-long-type.long-type-3987761834644699448.txt'
= note: consider using `--verbose` to print the full type name to the console
```
Reported in a comment of #135919.
Add memory layout documentation to generic NonZero<T>
The documentation I've added is based on the same Layout documentation that appears on the other `NonZero*` types. For example see [the Layout docs on `NonZeroI8`](https://doc.rust-lang.org/std/num/type.NonZeroI8.html#layout-1).
Separate Builder methods from tcx
As part of the autodiff upstreaming we noticed, that it would be nice to have various builder methods available without the TypeContext, which prevents the normal CodegenCx to be passed around between threads.
We introduce a SimpleCx which just owns the llvm module and llvm context, to encapsulate them.
The previous CodegenCx now implements deref and forwards access to the llvm module or context to it's SimpleCx sub-struct. This gives us a bit more flexibility, because now we can pass (or construct) the SimpleCx in locations where we don't have enough information to construct a CodegenCx, or are not able to pass it around due to the tcx lifetimes (and it not implementing send/sync).
This also introduces an SBuilder, similar to the SimpleCx. The SBuilder uses a SimpleCx, whereas the existing Builder uses the larger CodegenCx. I will push updates to make implementations generic (where possible) to be implemented once and work for either of the two. I'll also clean up the leftover code.
`call` is a bit tricky, because it requires a tcx, I probably need to duplicate it after all.
Tracking:
- https://github.com/rust-lang/rust/issues/124509
Add `File already exists` error doc to `hard_link` function
## Description
If the link path already exists, the error `AlreadyExists` is returned. This commit adds this error to the docs.
I tested it with the current rust master version, this error was returned when there is already a link for the file is present.
This was the error returned:
```
[harshit:../Desktop/rust_compiler_testing/hard_link (master|…5)] cargo +stage1 run
Compiling hard_link v0.1.0 (/home/harshit/Desktop/rust_compiler_testing/hard_link)
Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.12s
Running `target/debug/hard_link`
Err(Os { code: 17, kind: AlreadyExists, message: "File exists" })
```
This is my first PR on rust, any suggestions on which issue I can take next are most welcome 😄Fixes#130117
Rollup of 6 pull requests
Successful merges:
- #135873 (coverage: Prepare for upcoming changes to counter creation)
- #135926 (Implement `needs-subprocess` directive, and cleanup a bunch of tests to use `needs-{subprocess,threads}`)
- #135950 (Tidy Python improvements)
- #135956 (Make `Vec::pop_if` a bit more presentable)
- #135966 ([AIX] Allow different sized load and store in `tests/assembly/powerpc64-struct-abi.rs`)
- #135983 (Doc difference between extend and extend_from_slice)
r? `@ghost`
`@rustbot` modify labels: rollup
[AIX] Allow different sized load and store in `tests/assembly/powerpc64-struct-abi.rs`
Sometimes in the llvm backend generates 2 different copy assembly sequence.
1. `lxvd2x` followed immediately by `stxvd2x` (Load VSX Vector 2 Dword, Store VSX Vector 2 Dword) is semantically equivalent to;
2. `lxvw4x` followed immediately by `stxvw4x` (Load VSX Vector 4 Word, Store VSX Vector 4 Word)
Tidy Python improvements
Fixes display of Python formatting diffs in tidy, and refactors the code to make it simpler and more robust. Also documents Python formatting and linting in the Rustc dev guide.
Fixes: https://github.com/rust-lang/rust/issues/135942
r? `@onur-ozkan`
Implement `needs-subprocess` directive, and cleanup a bunch of tests to use `needs-{subprocess,threads}`
### Summary
Closes#128295.
- Implements `//@ needs-subprocess` directive in compiletest as requested in #128295. However, compiletest is a host tool, so we can't just try to spawn process because that spawns the process on *host*, not the *target*, under cross-compilation scenarios.
- The short-term solution is to add *Yet Another* list of allow-list targets.
- The long-term solution is to first check if a `$target` supports std, then try to run a binary to do run-time capability detection *on the target*. But that is tricky because you have to build-and-run a binary *for the target*.
- This PR picks the short-term solution, because the long-term solution is highly non-trivial, and it's already an improvement over individual `ignore-*`s all over the place.
- Opened an issue about the long-term solution in #135928.
- Documents `//@ needs-subprocess` in rustc-dev-guide.
- Replace `ignore-{wasm,wasm32,emscripten,sgx}` with `needs-{subprocess,threads}` where suitable in tests.
- Some drive-by test changes as I was trying to figure out if I could use `needs-{subprocess,threads}` and found some bits needlessly distracting.
Count of tests that use `ignore-{wasm,wasm32,emscripten,sgx}` before and after this PR:
| State | `ignore-sgx` | `ignore-wasm` | `ignore-emscripten` |
| - | - | - | - |
| Before this PR | 96 | 88 | 207 |
| After this PR | 36 | 38 | 61 |
<details>
<summary>Commands used to find out locally</summary>
```
--- before
[17:40] Joe:rust (fresh) | rg --no-ignore -l "ignore-sgx" tests | wc -l
96
[17:40] Joe:rust (fresh) | rg --no-ignore -l "ignore-wasm" tests | wc -l
88
[17:40] Joe:rust (fresh) | rg --no-ignore -l "ignore-emscripten" tests | wc -l
207
--- after
[17:39] Joe:rust (needs-subprocess-thread) | rg --no-ignore -l "ignore-sgx" tests | wc -l
36
[17:39] Joe:rust (needs-subprocess-thread) | rg --no-ignore -l "ignore-wasm" tests | wc -l
38
[17:39] Joe:rust (needs-subprocess-thread) | rg --no-ignore -l "ignore-emscripten" tests | wc -l
61
```
</details>
### Review advice
- Best reviewed commit-by-commit.
- Non-trivial test changes (not mechanically simple replacements) are split into individual commits to help with review. Their individual commit messages give some basic description of the changes.
- I *could* split some test changes out into another PR, but I found that I needed to change some tests to `needs-threads`, some to `needs-subprocess`, and some needed to use *both*, so they might conflict and become very annoying.
---
r? ``@ghost`` (need to run try jobs)
try-job: x86_64-msvc-1
try-job: i686-msvc-1
try-job: i686-mingw
try-job: x86_64-mingw-1
try-job: x86_64-apple-1
try-job: aarch64-apple
try-job: aarch64-gnu
try-job: test-various
try-job: armhf-gnu
coverage: Prepare for upcoming changes to counter creation
This is a collection of smaller changes to coverage instrumentation code that have been extracted from a larger PR that I'm still working on, in order to hopefully make review easier.
Each individual change should hopefully be mostly self-explanatory. One of the big goals of the upcoming PR will be to defer certain parts of counter-creation until codegen, via the query system, so that ends up being a recurring theme in these changes. Several of the changes are follow-ups to #135481.
There should be no observable change in compiler output.
Forbid usage of `hir` `Infer` const/ty variants in ambiguous contexts
The feature `generic_arg_infer` allows providing `_` as an argument to const generics in order to infer them. This introduces a syntactic ambiguity as to whether generic arguments are type or const arguments. In order to get around this we introduced a fourth `GenericArg` variant, `Infer` used to represent `_` as an argument to generic parameters when we don't know if its a type or a const argument.
This made hir visitors that care about `TyKind::Infer` or `ConstArgKind::Infer` very error prone as checking for `TyKind::Infer`s in `visit_ty` would find *some* type infer arguments but not *all* of them as they would sometimes be lowered to `GenericArg::Infer` instead.
Additionally the `visit_infer` method would previously only visit `GenericArg::Infer` not *all* infers (e.g. `TyKind::Infer`), this made it very easy to override `visit_infer` and expect it to visit all infers when in reality it would only visit *some* infers.
---
This PR aims to fix those issues by making the `TyKind` and `ConstArgKind` types generic over whether the infer types/consts are represented by `Ty/ConstArgKind::Infer` or out of line (e.g. by a `GenericArg::Infer` or accessible by overiding `visit_infer`). We then make HIR Visitors convert all const args and types to the versions where infer vars are stored out of line and call `visit_infer` in cases where a `Ty`/`Const` would previously have had a `Ty/ConstArgKind::Infer` variant:
API Summary
```rust
enum AmbigArg {}
enum Ty/ConstArgKind<Unambig = ()> {
...
Infer(Unambig),
}
impl Ty/ConstArg {
fn try_as_ambig_ty/ct(self) -> Option<Ty/ConstArg<AmbigArg>>;
}
impl Ty/ConstArg<AmbigArg> {
fn as_unambig_ty/ct(self) -> Ty/ConstArg;
}
enum InferKind {
Ty(Ty),
Const(ConstArg),
Ambig(InferArg),
}
trait Visitor {
...
fn visit_ty/const_arg(&mut self, Ty/ConstArg<AmbigArg>) -> Self::Result;
fn visit_infer(&mut self, id: HirId, sp: Span, kind: InferKind) -> Self::Result;
}
// blanket impl'd, not meant to be overriden
trait VisitorExt {
fn visit_ty/const_arg_unambig(&mut self, Ty/ConstArg) -> Self::Result;
}
fn walk_unambig_ty/const_arg(&mut V, Ty/ConstArg) -> Self::Result;
fn walk_ty/const_arg(&mut V, Ty/ConstArg<AmbigArg>) -> Self::Result;
```
The end result is that `visit_infer` visits *all* infer args and is also the *only* way to visit an infer arg, `visit_ty` and `visit_const_arg` can now no longer encounter a `Ty/ConstArgKind::Infer`. Representing this in the type system means that it is now very difficult to mess things up, either accessing `TyKind::Infer` "just works" and you won't miss *some* type infers- or it doesn't work and you have to look at `visit_infer` or some `GenericArg::Infer` which forces you to think about the full complexity involved.
Unfortunately there is no lint right now about explicitly matching on uninhabited variants, I can't find the context for why this is the case 🤷♀️
I'm not convinced the framing of un/ambig ty/consts is necessarily the right one but I'm not sure what would be better. I somewhat like calling them full/partial types based on the fact that `Ty<Partial>`/`Ty<Full>` directly specifies how many of the type kinds are actually represented compared to `Ty<Ambig>` which which leaves that to the reader to figure out based on the logical consequences of it the type being in an ambiguous position.
---
tool changes have been modified in their own commits for easier reviewing by anyone getting cc'd from subtree changes. I also attempted to split out "bug fixes arising from the refactoring" into their own commit so they arent lumped in with a big general refactor commit
Fixes#112110
Rollup of 8 pull requests
Successful merges:
- #133605 (Add extensive set of drop order tests)
- #135489 (remove pointless allowed_through_unstable_modules on TryFromSliceError)
- #135757 (Add NuttX support for AArch64 and ARMv7-A targets)
- #135799 (rustdoc-json: Rename `Path::name` to `path`, and give it the path again.)
- #135865 (For E0223, suggest associated functions that are similar to the path, even if the base type has multiple inherent impl blocks.)
- #135890 (Implement `VecDeque::pop_front_if` & `VecDeque::pop_back_if`)
- #135914 (Remove usages of `QueryNormalizer` in the compiler)
- #135936 (fix reify-intrinsic test)
r? `@ghost`
`@rustbot` modify labels: rollup
fix reify-intrinsic test
These are no longer `extern "rust-intrinsic"` functions so it no longer makes sense to try to cast them to that type.
r? `@oli-obk`
Remove usages of `QueryNormalizer` in the compiler
I want to get rid of the `QueryNormalizer`, possibly changing it to be special cased just for normalizing erasing regions, or perhaps adapting `normalize_erasing_regions` to use the assoc type normalizer if caching is sufficient and removing it altogther.
This removes the last two usages of `.query_normalize` in the *compiler*. There are a few usages left in rustdoc and clippy, which exist only because the query normalizer is more resilient to errors and non-well-formed alias types. I will remove those next.
r? lcnr or reassign
For E0223, suggest associated functions that are similar to the path, even if the base type has multiple inherent impl blocks.
Currently, the "help: there is an associated function with a similar name `from_utf8`" suggestion for `String::from::utf8` is only given if `String` has exactly one inherent `impl` item. This PR makes the suggestion be emitted even if the base type has multiple inherent `impl` items.
Example:
```rust
struct Foo;
impl Foo {
fn bar_baz() {}
}
impl Foo {} // load-bearing
fn main() {
Foo::bar::baz;
}
```
Nightly/stable output:
```rust
error[E0223]: ambiguous associated type
--> f.rs:7:5
|
7 | Foo::bar::baz;
| ^^^^^^^^
|
help: if there were a trait named `Example` with associated type `bar` implemented for `Foo`, you could use the fully-qualified path
|
7 | <Foo as Example>::bar::baz;
| ~~~~~~~~~~~~~~~~~~~~~
error: aborting due to 1 previous error
For more information about this error, try `rustc --explain E0223`.
```
Output with this PR, or without the load-bearing empty impl on nightly/stable:
```rust
error[E0223]: ambiguous associated type
--> f.rs:7:5
|
7 | Foo::bar::baz;
| ^^^^^^^^
|
help: there is an associated function with a similar name: `bar_baz`
|
7 | Foo::bar_baz;
| ~~~~~~~
error: aborting due to 1 previous error
For more information about this error, try `rustc --explain E0223`.
```
Ideally, this suggestion would also work for non-ADT types like ~~`str::char::indices`~~ (edit: latest commit makes this work with primitives) or `<dyn Any>::downcast::mut_unchecked`, but that seemed to be a harder change.
`@rustbot` label +A-diagnostics
rustdoc-json: Rename `Path::name` to `path`, and give it the path again.
Closes: #135600.
Reverts #134880 (Effectively, but not actually, as the `FORMAT_VERSION` needs to be bumped, changed docs/tests). CC `@AS1100K.`
Also CC `@obi1kenobi` `@LukeMathWalker`
Still needs before being merge-ready:
- [x] Tests for cross-crate paths
- [x] (Maybe) Document what the field does.
- [x] Decide if the field rename is good (https://github.com/rust-lang/rust/pull/135799#issuecomment-2605937831)
- [ ] Squash commits.
r? `@GuillaumeGomez`
Add NuttX support for AArch64 and ARMv7-A targets
This patch adds tier 3 support for AArch64 and ARMv7-A targets in NuttX, including:
- AArch64 target: aarch64-unknown-nuttx
- ARMv7-A target: armv7a-nuttx-eabi, armv7a-nuttx-eabihf
- Thumbv7-A target: thumbv7a-nuttx-eabi, thumbv7a-nuttx-eabihf
remove pointless allowed_through_unstable_modules on TryFromSliceError
This got added in https://github.com/rust-lang/rust/pull/132482 but the PR does not explain why. `@lukas-code` do you still remember? Also Cc `@Noratrieb` as reviewer of that PR.
If I understand the issue description correctly, all paths under which this type is exported are stable now: `core::array::TryFromSliceError` and `std::array::TryFromSliceError`. If that is the case, we shouldn't have the attribute; it's a terrible hack that should only be used when needed to maintain backward compatibility. Getting some historic information right is IMO *not* sufficient justification to risk accidentally exposing this type via more unstable paths today or in the future.
Add extensive set of drop order tests
On lang, we've recently been discussing the drop order with respect to `let` chains apropos of how we shortened temporary lifetimes in Rust 2024 and how we may shorten them further in the future.
Here we add an extensive set of tests that demonstrate the drop order in the cases that interest us.
Regarding the let chains stabilization prompting this analysis, see:
- https://github.com/rust-lang/rust/pull/132833
r? ghost
cc `@ehuss` `@dingxiangfei2009` `@nikomatsakis`
Mohammad Omidvar
bors
León Orell Valerian Liehr
许杰友 Jieyou Xu (Joe)
Ben Kimock
The Miri Cronjob Bot
Matthias Krüger
Jakub Beránek