This CL adds a few new helper functions for constructing and
initializing temporary variables during walk.
Passes toolstash -cmp.
Change-Id: I54965d992cd8dfef7cb7dc92a17c88372e52a0d6
Reviewed-on: https://go-review.googlesource.com/c/go/+/284224
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
After CL 284220, we now only need to detect expressions that contain
function calls in the arguments list of further function calls. So we
can simplify Node.HasCall/fncall/etc a lot.
Instead of incrementally tracking whether an expression contains
function calls all throughout walk, simply check once at the point of
using an expression as a function call argument. Since any expression
checked here will itself become a function call argument, it won't be
checked again because we'll short circuit at the enclosing function
call.
Also, restructure the recursive walk code to use mayCall, and trim
down the list of acceptable expressions. It should be okay to be
stricter, since we'll now only see function call arguments and after
they've already been walked.
It's possible I was overly aggressive removing Ops here. But if so,
we'll get an ICE, and it'll be easy to re-add them. I think this is
better than the alternative of accidentally allowing expressions
through that risk silently clobbering the stack.
Passes toolstash -cmp.
Change-Id: I585ef35dcccd9f4018e4bf2c3f9ccb1514a826f3
Reviewed-on: https://go-review.googlesource.com/c/go/+/284223
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Currently, to ensure OAS2FUNC results are assigned in the correct
order, they're always assigned to temporary variables. However, these
temporary variables are typed based on the destination type, which may
require an interface conversion. This means walk may have to then
introduce a second set of temporaries to ensure result parameters are
all copied out of the results area, before it emits calls to runtime
conversion functions.
That's just silly. Instead, this CL changes order to allocate the
result temporaries with the same type as the function returns in the
first place, and then assign them one at a time to their destinations,
with conversions as needed.
While here, also fix an order-of-evaluation issue with has-ok
assignments that I almost added to multi-value function call
assignments, and add tests for each.
Change-Id: I9f4e962425fe3c5e3305adbbfeae2c7f253ec365
Reviewed-on: https://go-review.googlesource.com/c/go/+/284220
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Went in a semi-automated way through the clearest renames of functions,
and updated comments and error messages where it made sense.
Change-Id: Ied8e152b562b705da7f52f715991a77dab60da35
Reviewed-on: https://go-review.googlesource.com/c/go/+/284216
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
After CL 283233, SSA can now handle new(typ) without the frontend to
generate the type address, so we can remove ONEWOBJ in favor of ONEW
only.
This is also not save for toolstash, the same reason with CL 284115.
Change-Id: Ie03ea36b3b6f95fc7ce080376c6f7afc402d51a3
Reviewed-on: https://go-review.googlesource.com/c/go/+/284117
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
CL 283233 added reflectType method to ssagen.state, which we can use to
setup type address in the SSA backend in favor of the frontend. However,
this will change the order of symbols generation, so not safe for toolstash.
Change-Id: Ib6932ec42a9d28c3fd7a1c055596e75494c29843
Reviewed-on: https://go-review.googlesource.com/c/go/+/284115
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
WriteType isn't safe for direct concurrent use, and users should
instead use TypeLinksym or another higher-level API provided by
reflectdata. After the previous CL, there are no remaining uses of
WriteType elsewhere in the compiler, so unexport it to keep it that
way.
For #43701.
[git-generate]
cd src/cmd/compile/internal/reflectdata
rf '
mv WriteType writeType
'
Change-Id: I294a78be570a47feb38a1ad4eaae7723653d5991
Reviewed-on: https://go-review.googlesource.com/c/go/+/284077
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
The code for allocating linksyms and recording that we need runtime
type descriptors is now concurrent-safe, so move it to where those
symbols are actually needed to reduce complexity and risk of failing
to generate all needed symbols in advance.
For #43701.
Change-Id: I759d2508213ac9a4e0b504b51a75fa10dfa37a8d
Reviewed-on: https://go-review.googlesource.com/c/go/+/284076
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Matthew Dempsky <mdempsky@google.com>
We decide during escape analysis whether to pass closure variables by
value or reference. One of the factors that's considered is whether a
variable has had its address taken.
However, this analysis is based only on the user-written source code,
whereas order+walk may introduce rewrites that take the address of a
variable (e.g., passing a uint16 key by reference to the size-generic
map runtime builtins).
Typically this would be harmless, albeit suboptimal. But in #43701 it
manifested as needing a stack object for a function where we didn't
realize we needed one up front when we generate symbols.
Probably we should just generate symbols on demand, now that those
routines are all concurrent-safe, but this is a first fix.
Thanks to Alberto Donizetti for reporting the issue, and Cuong Manh Le
for initial investigation.
Fixes#43701.
Change-Id: I16d87e9150723dcb16de7b43f2a8f3cd807a9437
Reviewed-on: https://go-review.googlesource.com/c/go/+/284075
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
The feature being tested is insensitive to the OS anyway.
Change-Id: Ieac9bfaafc6a54c00017afcc0b87bd8bbe80af7b
Reviewed-on: https://go-review.googlesource.com/c/go/+/284032
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
fmt.go:dumpNodeHeader uses reflection to call all "func() bool"-typed
methods on Nodes during printing, but the OnStack method that I added
in CL 283233 isn't meant to be called on non-variables.
dumpNodeHeader does already guard against panics, as happen in some
other accessors, but not against Fatalf, as I was using in OnStack. So
simply change OnStack to use panic too.
Thanks to drchase@ for the report.
Change-Id: I0cfac84a96292193401a32fc5e7fd3c48773e008
Reviewed-on: https://go-review.googlesource.com/c/go/+/284074
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
This patch pulls in a few additional changes requested by code
reviewers for CL 270863 that were accidentally left out. Specifically,
guarding use of ORETJMP to insure it is not used when building dynlink
on ppc64le, and a tweaking the command line flags used to control
wrapper generation.
Change-Id: I4f96462e570180887eb8693e11badd83d142710a
Reviewed-on: https://go-review.googlesource.com/c/go/+/279527
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Trust: Than McIntosh <thanm@google.com>
CL 283672 added a flag to prevent double walking, use that flag instead
of checking SwitchStmt.Compiled field.
Passes toolstash -cmp.
Change-Id: Idb8f9078412fb789f51ed4fc4206638011e38a93
Reviewed-on: https://go-review.googlesource.com/c/go/+/283733
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This CL moves almost all PAUTOHEAP handling code to SSA construction.
Instead of changing Names to PAUTOHEAP, escape analysis now only sets
n.Esc() to ir.EscHeap, and SSA handles creating the "&x"
pseudo-variables and associating them via Heapaddr.
This CL also gets rid of n.Stackcopy, which was used to distinguish
the heap copy of a parameter used within a function from the stack
copy used in the function calling convention. In practice, this is
always obvious from context: liveness and function prologue/epilogue
want to know about the stack copies, and everywhere else wants the
heap copy.
Hopefully moving all parameter/result handling into SSA helps with
making the register ABI stuff easier.
Also, the only remaining uses of PAUTOHEAP are now for closure
variables, so I intend to rename it to PCLOSUREVAR or get rid of those
altogether too. But this CL is already big and scary enough.
Change-Id: Ief5ef6205041b9d0ee445314310c0c5a98187e77
Reviewed-on: https://go-review.googlesource.com/c/go/+/283233
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: David Chase <drchase@google.com>
Reduce 16 byte for CallExpr, from 184 to 168 on 64-bit archs.
Passes toolstash -cmp.
Change-Id: I59c7609ccd03e8b4a7df8d2c30de8022ae312cee
Reviewed-on: https://go-review.googlesource.com/c/go/+/283732
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Currently, there's an awkward issue with walk pass. When walking the AST
tree, the compiler generate code for runtime functions (using mkcall* variants),
add/modify the AST tree and walk new generated tree again. This causes the
double walking on some CallExpr, which is relying on checking Rargs to prevent
that. But checking Rargs has its own issue as well.
For functions that does not have arguments, this check is failed, and we
still double walk the CallExpr node.
This CL change the way that compiler detects double walking, by using
separated field instead of relying on Rargs. In perfect world, we should make
the compiler walks the AST tree just once, but it's not safe to do that at
this moment.
Passes toolstash -cmp.
Change-Id: Ifdd1e0f98940ddb1f574af2da2ac7f005b5fcadd
Reviewed-on: https://go-review.googlesource.com/c/go/+/283672
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
CL 278914 introduced NameOffsetExpr to avoid copying ONAME nodes and
hacking up their offsets, but evidently staticinit subtly depended on
the prior behavior to allow dynamic initialization of blank variables.
This CL refactors the code somewhat to avoid using NameOffsetExpr with
blank variables, and to instead create dynamic assignments directly to
the global blank node. It also adds a check to NewNameOffsetExpr to
guard against misuse like this, since I suspect there could be other
cases still lurking within staticinit. (This code is overdue for an
makeover anyway.)
Thanks to thanm@ for bisect and test case minimization.
Fixes#43677.
Change-Id: Ic71cb5d6698382feb9548dc3bb9fd606b207a172
Reviewed-on: https://go-review.googlesource.com/c/go/+/283537
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
I misread the FIXME comment in InitLSym the first time. It's referring
to how InitLSym is supposed to be called exactly once per
function (see function documentation), but this is evidently not
actually the case currently in GOEXPERIMENT=regabi mode.
So just move the NeedFuncSym call below the GOEXPERIMENT=regabi
workaround.
Also, to fix the linux-arm64-{aws,packet} builders, move the call to
reflectdata.WriteFuncSyms() to after the second batch of functions are
compiled. This is necessary to make sure we catch all the funcsyms
that can be added by late function compilation.
Change-Id: I6d6396d48e2ee29c1fb007fa2b99e065b36375db
Reviewed-on: https://go-review.googlesource.com/c/go/+/283552
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Trust: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Needs to be visible to ssagen, and might as well start clean to avoid
creating a lot of accidental dependencies.
Added some methods for export.
Decided to use a pointer instead of value for ABIConfig uses.
Tests ended up separate from abiutil itself; otherwise there are import cycles.
Change-Id: I5570e1e6a463e303c5e2dc84e8dd4125e7c1adcc
Reviewed-on: https://go-review.googlesource.com/c/go/+/282614
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
This only works for functions; if you try it with a method, it will
fail. It does work for both local package and imports. For now,
it tells you when it thinks it sees either a declaration or a call of
such a function (this will normally be silent since no existing
code uses this pragma).
Note: it appears to be really darn hard to figure out if this
pragma was set for a method, and the method's call site. Better
ir.Node wranglers than I might be able to make headway, but it
seemed unnecessary for this experiment.
Change-Id: I601c2ddd124457bf6d62f714d7ac871705743c0a
Reviewed-on: https://go-review.googlesource.com/c/go/+/279521
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
This is a selected copy from the register ABI experiment CL, focused
on the files and data structures that handle spilling around morestack.
Unnecessary code from the experiment was removed, other code was adapted.
Would it make sense to leave comments in the experiment as pieces are
brought over?
Experiment CL (for comparison purposes)
https://go-review.googlesource.com/c/go/+/28832
Change-Id: I92136f070351d4fcca1407b52ecf9b80898fed95
Reviewed-on: https://go-review.googlesource.com/c/go/+/279520
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
This is intended to make it easier to write/change a test
without referring to the source code to figure out what the
error messages actually mean, or how to correct them.
Change-Id: Ie79ff7cd9f2d1fa605257fe97eace68adc8a6716
Reviewed-on: https://go-review.googlesource.com/c/go/+/281452
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Current many architectures use a rule along the lines of
// Canonicalize the order of arguments to comparisons - helps with CSE.
((CMP|CMPW) x y) && x.ID > y.ID => (InvertFlags ((CMP|CMPW) y x))
to normalize comparisons as much as possible for CSE. Replace the
ID comparison with something less variable across compiler changes.
This helps avoid spurious failures in some of the codegen-comparison
tests (though the current choice of comparison is sensitive to Op
ordering).
Two tests changed to accommodate modified instruction choice.
Change-Id: Ib35f450bd2bae9d4f9f7838ceaf7ec682bcf1e1a
Reviewed-on: https://go-review.googlesource.com/c/go/+/280155
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The closure's type always matches the corresponding function's type,
so just use one instance rather than carrying around two. Simplifies
construction of closures, rewriting them during walk, and shrinks
memory usage.
Passes toolstash -cmp.
Change-Id: I83b8b8f435b02ab25a30fb7aa15d5ec7ad97189d
Reviewed-on: https://go-review.googlesource.com/c/go/+/283152
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
We used to transform directly called closures in a separate pass
before walk, because we couldn't guarantee whether we'd see the
closure call or the closure itself first. As of the last CL, this
ordering is always guaranteed, so we can rewrite calls and the closure
at the same time.
Change-Id: Ia6f4d504c24795e41500108589b53395d301123b
Reviewed-on: https://go-review.googlesource.com/c/go/+/283315
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
This CL reorders function compilation to ensure that functions are
always compiled before any enclosed function literals. The primary
goal of this is to reduce the risk of race conditions that arise due
to compilation of function literals needing to inspect data from their
closure variables. However, a pleasant side effect is that it allows
skipping the redundant, separate compilation of function literals that
were inlined into their enclosing function.
Change-Id: I03ee96212988cb578c2452162b7e99cc5e92918f
Reviewed-on: https://go-review.googlesource.com/c/go/+/282892
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
No real code changes. Just splitting into a separate CL so the next
one is easier to review.
Change-Id: I428dc986b76370d8d3afc12cf19585f6384389d7
Reviewed-on: https://go-review.googlesource.com/c/go/+/283314
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
The compiler currently has two modes for compilation: one where it
compiles each function as it sees them, and another where it enqueues
them all into a work queue. A subsequent CL is going to reorder
function compilation to ensure that functions are always compiled
before any non-trivial function literals they enclose, and this will
be easier if we always use the compile work queue.
Also, fewer compilation modes makes things simpler to reason about.
Change-Id: Ie090e81f7476c49486296f2b90911fa0a466a5dd
Reviewed-on: https://go-review.googlesource.com/c/go/+/283313
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
InitLSym is where we're now generating ABI wrappers, so it seems as
good a place as any to make sure we're generating the degenerate
closure wrappers for declared functions and methods.
Change-Id: I097f34bbcee65dee87a97f9ed6f3f38e4cf2e2b5
Reviewed-on: https://go-review.googlesource.com/c/go/+/283312
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Just directly set Type.Vargen when declaring defined types within a
function.
Change-Id: Idcc0007084a660ce1c39da4a3697e158a1c615b5
Reviewed-on: https://go-review.googlesource.com/c/go/+/283212
Trust: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Historically, inline function bodies were exported as plain Go source
code, and symbol mangling was a convenient hack because it allowed
variables to be re-imported with largely the same names as they were
originally exported as.
However, nowadays we use a binary format that's more easily extended,
so we can simply serialize all of a function's declared objects up
front, and then refer to them by index later on. This also allows us
to easily report unmangled names all the time (e.g., error message
from issue7921.go).
Fixes#43633.
Change-Id: I46c88f5a47cb921f70ab140976ba9ddce38df216
Reviewed-on: https://go-review.googlesource.com/c/go/+/283193
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Dan Scales <danscales@google.com>
Trust: Matthew Dempsky <mdempsky@google.com>
Creating closure vars is subtle and is also needed in both CL 281932
and CL 283112, so refactor out a common implementation that can be
used in all 3 places.
Passes toolstash -cmp.
Change-Id: Ib993eb90c895b52759bfbfbaad88921e391b0b4d
Reviewed-on: https://go-review.googlesource.com/c/go/+/283194
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Dan Scales <danscales@google.com>
Trust: Matthew Dempsky <mdempsky@google.com>
Escape analysis needs to know the index of result parameters for
recording escape-flow information. It currently relies on Vargen for
this, but it can easily figure this out for itself. So just do that
instead, so that we can remove Vargen.
Passes toolstash -cmp.
For #43633.
Change-Id: I65dedc2d73bc25e85ff400f308e50b73dc503630
Reviewed-on: https://go-review.googlesource.com/c/go/+/283192
Trust: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
After the previous CLs, all closure reads are handled during SSA
construction.
Change-Id: Iad67b01fa2d3798f50ea647be7ccf8195f189c27
Reviewed-on: https://go-review.googlesource.com/c/go/+/281512
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Similar to with regular closures, we can change method value wrappers
to use ClosureVars and allow SSA construction to take care of wiring
it up appropriately.
Change-Id: I05c0b1bcec4e24305324755df35b7bc5b8a6ce7a
Reviewed-on: https://go-review.googlesource.com/c/go/+/281353
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
For function literals that aren't inlined or directly called, we need
to pass their arguments via a closure struct. This also means we need
to rewrite uses of closure variables to access from this closure
struct.
Currently we do this rewrite in a pass before walking begins. This CL
moves the code to SSA construction instead, alongside binding other
input parameters.
Change-Id: I13538ef3394e2d6f75d5b7b2d0adbb00db812dc2
Reviewed-on: https://go-review.googlesource.com/c/go/+/281352
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Currently, during walk we rewrite PAUTOHEAP uses into derefs of their
corresponding Heapaddr, but we can easily do this instead during SSA
construction. This does involve updating two test cases:
* nilptr3.go
This file had a test that we emit a "removed nil check" diagnostic for
the implicit dereference from accessing a PAUTOHEAP variable. This CL
removes this diagnostic, since it's not really useful to end users:
from the user's point of view, there's no pointer anyway, so they
needn't care about whether we check for nil or not. That's a purely
internal detail. And with the PAUTOHEAP dereference handled during SSA
construction, we can more robustly ensure this happens, rather than
relying on setting a flag in walk and hoping that SSA sees it.
* issue20780.go
Previously, when PAUTOHEAPs were dereferenced during walk, it had a
consequence that when they're passed as a function call argument, they
would first get copied to the stack before being copied to their
actual destination. Moving the dereferencing to SSA had a side-effect
of eliminating this unnecessary temporary, and copying directly to the
destination parameter.
The test is updated to instead call "g(h(), h())" where h() returns a
large value, as the first result will always need to be spilled
somewhere will calling the second function. Maybe eventually we're
smart enough to realize it can be spilled to the heap, but we don't do
that today.
Because I'm concerned that the direct copy-to-parameter optimization
could interfere with race-detector instrumentation (e.g., maybe the
copies were previously necessary to ensure they're not clobbered by
inserted raceread calls?), I've also added issue20780b.go to exercise
this in a few different ways.
Change-Id: I720598cb32b17518bc10a03e555620c0f25fd28d
Reviewed-on: https://go-review.googlesource.com/c/go/+/281293
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
With the recent compiler rewrites and cleanups to gc/fmt.go, the
"safety net" provided by fmt_test has become less important and
the test itself has become a burden (often breaks because of small
format changes elsewhere).
Eventually, the syntax and types2 packages will provide most error
and diagnostic compiler output at which point fmt.go can be further
simplified as well.
Change-Id: Ie93eefd3e1166f3548fed0199b732dbd6c81948a
Reviewed-on: https://go-review.googlesource.com/c/go/+/282560
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Now that CaptureVars is gone, we can remove the extra code in escape
analysis that only served to appease toolstash -cmp.
Change-Id: I8c811834f3d966e76702e2d362e3de414c94bea6
Reviewed-on: https://go-review.googlesource.com/c/go/+/281544
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Capture analysis is now part of escape analysis.
Passes toolstash -cmp.
Change-Id: Ifcd3ecc342074c590e0db1ff0646dfa1ea2ff57b
Reviewed-on: https://go-review.googlesource.com/c/go/+/281543
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Currently we rely on the type-checker to do some basic data-flow
analysis to help decide whether function literals should capture
variables by value or reference. However, this analysis isn't done by
go/types, and escape analysis already has a better framework for doing
this more precisely.
This CL extends escape analysis to recalculate the same "byval" as
CaptureVars and check that it matches. A future CL will remove
CaptureVars in favor of escape analysis's calculation.
Notably, escape analysis happens after deadcode removes obviously
unreachable code, so it sees the AST without any unreachable
assignments. (Also without unreachable addrtakens, but
ComputeAddrtaken already happens after deadcode too.) There are two
test cases where a variable is only reassigned on certain CPUs. This
CL changes them to reassign the variables unconditionally (as no-op
reassignments that avoid triggering cmd/vet's self-assignment check),
at least until we remove CaptureVars.
Passes toolstash -cmp.
Change-Id: I7162619739fedaf861b478fb8d506f96a6ac21f3
Reviewed-on: https://go-review.googlesource.com/c/go/+/281535
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
The gc implementation has had precise GC for a while now, so we can
enable these tests more broadly.
Confirmed that they still fail with gccgo 10.2.1.
Change-Id: Ic1c0394ab832024a99e34163c422941a3706e1a2
Reviewed-on: https://go-review.googlesource.com/c/go/+/281542
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
The backend doesn't synchronize compilation of functions with their
enclosed function literals, so it's not safe to double-check that
IsClosureVar isn't set on the underlying Name. Plenty of frontend
stuff would blow-up if this was wrong anyway, so it should be fine to
omit.
Change-Id: I3e97b64051fe56d97bf316c9b5dcce61f2082428
Reviewed-on: https://go-review.googlesource.com/c/go/+/281812
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
There's a bunch of code that wants to map closure variables back to
their original name, so add a single Name.Canonical method that they
can all use.
Also, move the Byval flag from being stored on individual closure
variables to being stored on the canonical variable.
Passes toolstash -cmp.
Change-Id: Ia3ef81af5a15783d09f04b4e274ce33df94518e6
Reviewed-on: https://go-review.googlesource.com/c/go/+/281541
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
ir.StaticValue currently relies on CaptureVars setting Addrtaken for
variables that are assigned within nested function literals. We want
to move that logic to escape analysis, but ir.StaticValue is used in
inlining and devirtualization, which happen before escape
analysis.
The long-term solution here is to generalize escape analysis's precise
reassignment tracking for use by other optimization passes, but for
now we just generalize ir.StaticValue to not depend on Addrtaken
anymore. Instead, it now also pays attention to OADDR nodes as well as
recurses into OCLOSURE bodies.
Passes toolstash -cmp.
Change-Id: I6114e3277fb70b235f4423d2983d0433c881f79f
Reviewed-on: https://go-review.googlesource.com/c/go/+/281540
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
For OINDEX expressions, ir.OuterValue depends on knowing the indexee's
type. Rather than silently acting as though it's not an array, make it
loudly fail.
The only code that needs to be fixed to support this is checkassign
during typechecking, which needs to avoid calling ir.OuterValue now if
typechecking the assigned operand already failed.
Passes toolstash -cmp.
Change-Id: I935cae0dacc837202bc6b63164dc2f0a6fde005c
Reviewed-on: https://go-review.googlesource.com/c/go/+/281539
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
CaptureVars is responsible for deciding whether free variables should
be captured by value or by reference, but currently it also makes up
for some of the short-comings of the frontend symbol resolution /
type-checking algorithms. These are really separate responsibilities,
so move the latter into type-checking where it fits better.
Passes toolstash -cmp.
Change-Id: Iffbd53e83846a9ca9dfb54b597450b8543252850
Reviewed-on: https://go-review.googlesource.com/c/go/+/281534
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Dump uses reflection to print IR nodes, and it only knew how to print
out the Nodes slice type itself. This CL adds support for printing any
slice whose element type implements Node, such as SwitchStmt and
SelectStmt's clause lists.
Change-Id: I2fd8defe11868b564d1d389ea3cd9b8abcefac62
Reviewed-on: https://go-review.googlesource.com/c/go/+/281537
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Matthew Dempsky
Dan Scales
Cuong Manh Le
David Chase
Than McIntosh
Robert Griesemer
Baokun Lee