A future change to gofmt will rewrite
// Doc comment.
//
func f()
to
// Doc comment.
func f()
Apply that change preemptively to all doc comments.
For #51082.
Change-Id: I4023e16cfb0729b64a8590f071cd92f17343081d
Reviewed-on: https://go-review.googlesource.com/c/go/+/384259
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Generics have landed; we cannot revert the syntax anymore. Remove
ability to choose between non-generic and generic code. Also remove
mode to enable method type parameters. Adjust code accordingly.
Also remove a couple of TODOs that are not relevant anymore.
Remove tests from types2 which were focussed on method type parameters,
make types2 and go/types tests match up where there was a difference in
this regard.
Change-Id: I989bdcb19eea7414214af739187fa013a044295d
Reviewed-on: https://go-review.googlesource.com/c/go/+/396634
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Move switch to enable method type parameters entirely
to the parser, by adding the mode AllowMethodTypeParams.
Ensure that the error messages are consistent.
Remove unnecessary code in the type checker.
Fixes#50317.
Change-Id: I4f3958722400bdb919efa4c494b85cf62f4002bb
Reviewed-on: https://go-review.googlesource.com/c/go/+/376054
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The respective issue has been accepted, so we can always
accept constraint literals with omitted interfaces.
For #48424.
Change-Id: Ia3d325401252a5a22d5ffa98d2ae6af73178dec0
Reviewed-on: https://go-review.googlesource.com/c/go/+/355709
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
The type set notation has been accepted a while ago.
We're not going back to supporting the original
type list notation. Remove support for it in the
parser and type checker.
Change-Id: I860651f80b89fa43a3a5a2a02cf823ec0dae583c
Reviewed-on: https://go-review.googlesource.com/c/go/+/354131
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This CL permits an arbitrary type as well as the type sets ~T and A|B
in constraint position, without the need of a surrrounding interface.
For instance, the type parameter list
[P interface{ ~map[K]V }, K comparable, V interface{ ~string }]
may be written as
[P ~map[K]V, K comparable, V ~string]
The feature must be enabled explicitly with the AllowTypeSets mode
and is only available if AllowGenerics is set as well.
For #48424.
Change-Id: Ic70bb97a49ff75e67e040853eac10e6aed0fef1a
Reviewed-on: https://go-review.googlesource.com/c/go/+/353133
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Add (temporary) syntax.AllowTypeLists mode to control the
acceptance of type lists; the compiler doesn't set it,
but existing syntax and types2 tests do so that the code
remains exercised while it exists.
Adjust various tests to use the type set notation.
Change-Id: I798e607912552db6bfe38a7cd4324b74c6bf4d95
Reviewed-on: https://go-review.googlesource.com/c/go/+/347249
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Port from dev.go2go prototype branch. The compiler doesn't yet set the
syntax.AllowGenerics mode, so parsing of generic code remains disabled.
Known issue: The doc strings documenting the specific syntax accepted
by parser methods are not all up-to-date.
Change-Id: I13d134289fd9330fd0ed7f97c997cca6f23466fd
Reviewed-on: https://go-review.googlesource.com/c/go/+/261658
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Thie CL changes cmd/compile/internal/syntax to give the gc half of
the compiler more control over pragma handling, so that it can prepare
better errors, diagnose misuse, and so on. Before, the API between
the two was hard-coded as a uint16. Now it is an interface{}.
This should set us up better for future directives.
In addition to the split, this CL emits a "misplaced compiler directive"
error for any directive that is in a place where it has no effect.
I've certainly been confused in the past by adding comments
that were doing nothing and not realizing it. This should help
avoid that kind of confusion.
The rule, now applied consistently, is that a //go: directive
must appear on a line by itself immediately before the declaration
specifier it means to apply to. See cmd/compile/doc.go for
precise text and test/directive.go for examples.
This may cause some code to stop compiling, but that code
was broken. For example, this code formerly applied the
//go:noinline to f (not c) but now will fail to compile:
//go:noinline
const c = 1
func f() {}
Change-Id: Ieba9b8d90a27cfab25de79d2790a895cefe5296f
Reviewed-on: https://go-review.googlesource.com/c/go/+/228578
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
1) Fix the doc string for syntax.Parse: The returned AST is
always nil if there was an error and an error handler is missing.
2) Adjust the syntax Print and Dump tests such that they print and
dump the AST even in the presence of errors.
Change-Id: If658eabdcc83f578d815070bc65d1a5f6cfaddfc
Reviewed-on: https://go-review.googlesource.com/94157
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The compiler replaces any path of the form /path/to/goroot/src/net/port.go
with GOROOT/src/net/port.go so that the same object file is
produced if the GOROOT is moved. It was skipping this transformation
for any absolute path into the GOROOT that came from //line directives,
such as those generated by cmd/cgo.
Fixes#21373Fixes#21720Fixes#21825
Change-Id: I2784c701b4391cfb92e23efbcb091a84957d61dd
Reviewed-on: https://go-review.googlesource.com/63693
Run-TryBot: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Instead of a separate check control flow pass (checkcfg.go)
operating on nodes, perform this check at parse time on the
new syntax tree. Permits this check to be done concurrently,
and doesn't depend on the specifics of the symbol's dclstack
implementation anymore. The remaining dclstack uses will be
removed in a follow-up change.
- added CheckBranches Mode flag (so we can turn off the check
if we only care about syntactic correctness, e.g. for tests)
- adjusted test/goto.go error messages: the new branches
checker only reports if a goto jumps into a block, but not
which block (we may want to improve this again, eventually)
- also, the new branches checker reports one variable that
is being jumped over by a goto, but it may not be the first
one declared (this is fine either way)
- the new branches checker reports additional errors for
fixedbugs/issue14006.go (not crucial to avoid those errors)
- the new branches checker now correctly reports only
variable declarations being jumped over, rather than
all declarations (issue 8042). Added respective tests.
Fixes#8042.
Change-Id: I53b6e1bda189748e1e1fb5b765a8a64337c27d40
Reviewed-on: https://go-review.googlesource.com/39998
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
- parser creates sensible nodes in case of syntax errors instead of nil
- a new BadExpr node is used in places where we can't do better
- fixed error message for incorrect type switch guard
- minor cleanups
Fixes#19663.
Change-Id: I028394c6db9cba7371f0e417ebf93f594659786a
Reviewed-on: https://go-review.googlesource.com/38653
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Avoid construction of incorrect syntax trees in presence of errors.
For #19663.
Change-Id: I43025a3cf0fe02cae9a57e8bb9489b5f628c3fd7
Reviewed-on: https://go-review.googlesource.com/38604
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This replaces the src.Pos LineHist-based position tracking with
the syntax.Pos implementation and updates all uses.
The LineHist table is not used anymore - the respective code is still
there but should be removed eventually. CL forthcoming.
Passes toolstash -cmp when comparing to the master repo (with the
exception of a couple of swapped assembly instructions, likely due
to different instruction scheduling because the line-based sorting
has changed; though this is won't affect correctness).
The sizes of various important compiler data structures have increased
significantly (see the various sizes_test.go files); this is probably
the reason for an increase of compilation times (to be addressed). Here
are the results of compilebench -count 5, run on a "quiet" machine (no
apps running besides a terminal):
name old time/op new time/op delta
Template 256ms ± 1% 280ms ±15% +9.54% (p=0.008 n=5+5)
Unicode 132ms ± 1% 132ms ± 1% ~ (p=0.690 n=5+5)
GoTypes 891ms ± 1% 917ms ± 2% +2.88% (p=0.008 n=5+5)
Compiler 3.84s ± 2% 3.99s ± 2% +3.95% (p=0.016 n=5+5)
MakeBash 47.1s ± 1% 47.2s ± 2% ~ (p=0.841 n=5+5)
name old user-ns/op new user-ns/op delta
Template 309M ± 1% 326M ± 2% +5.18% (p=0.008 n=5+5)
Unicode 165M ± 1% 168M ± 4% ~ (p=0.421 n=5+5)
GoTypes 1.14G ± 2% 1.18G ± 1% +3.47% (p=0.008 n=5+5)
Compiler 5.00G ± 1% 5.16G ± 1% +3.12% (p=0.008 n=5+5)
Change-Id: I241c4246cdff627d7ecb95cac23060b38f9775ec
Reviewed-on: https://go-review.googlesource.com/34273
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
- use syntax.Pos in syntax.Error (rather than line, col)
- use syntax.Pos in syntax.PragmaHandler (rather than just line)
- update uses
- better documentation in various places
Also:
- make Pos methods use Pos receiver (rather than *Pos)
Reviewed in and cherry-picked from https://go-review.googlesource.com/#/c/33891/.
With minor adjustments to noder.go to make merge compile.
Change-Id: I5507cea6c2be46a7677087c1aeb69382d31033eb
Reviewed-on: https://go-review.googlesource.com/34236
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed in and cherry-picked from https://go-review.googlesource.com/#/c/33764/.
Minor adjustment in noder.go to make merge compile again.
Change-Id: Ib5029b52b59944f207b0f2438c8a5aa576eb25b8
Reviewed-on: https://go-review.googlesource.com/34233
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
- define syntax.Error for cleaner error reporting
- abort parsing after first error if no error handler is installed
- make sure to always report the first error, if any
- document behavior of API calls
- while at it: rename ReadXXX -> ParseXXX (clearer)
- adjust cmd/compile noder.go accordingly
Fixes#17774.
Change-Id: I7893eedea454a64acd753e32f7a8bf811ddbb03c
Reviewed-on: https://go-review.googlesource.com/32950
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
If no error handler is provided, terminate parsing with first error
and report that error.
Fixes#17697.
Change-Id: I9070faf7239bd53725de141507912b92ded3474b
Reviewed-on: https://go-review.googlesource.com/32456
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This adds a //go:notinheap pragma for declarations of types that must
not be heap allocated. We ensure these rules by disallowing new(T),
make([]T), append([]T), or implicit allocation of T, by disallowing
conversions to notinheap types, and by propagating notinheap to any
struct or array that contains notinheap elements.
The utility of this pragma is that we can eliminate write barriers for
writes to pointers to go:notinheap types, since the write barrier is
guaranteed to be a no-op. This will let us mark several scheduler and
memory allocator structures as go:notinheap, which will let us
disallow write barriers in the scheduler and memory allocator much
more thoroughly and also eliminate some problematic hybrid write
barriers.
This also makes go:nowritebarrierrec and go:yeswritebarrierrec much
more powerful. Currently we use go:nowritebarrier all over the place,
but it's almost never what you actually want: when write barriers are
illegal, they're typically illegal for a whole dynamic scope. Partly
this is because go:nowritebarrier has been around longer, but it's
also because go:nowritebarrierrec couldn't be used in situations that
had no-op write barriers or where some nested scope did allow write
barriers. go:notinheap eliminates many no-op write barriers and
go:yeswritebarrierrec makes it possible to opt back in to write
barriers, so these two changes will let us use go:nowritebarrierrec
far more liberally.
This updates #13386, which is about controlling pointers from non-GC'd
memory to GC'd memory. That would require some additional pragma (or
pragmas), but could build on this pragma.
Change-Id: I6314f8f4181535dd166887c9ec239977b54940bd
Reviewed-on: https://go-review.googlesource.com/30939
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Instead of saving all pragmas and processing them after parsing is
finished, process them immediately during scanning like the current
lexer does.
This is a bit unfortunate because it means we can't use
syntax.ParseFile to concurrently parse files yet, but it fixes how we
report syntax errors in the presence of //line pragmas.
While here, add a bunch more gcCompat entries to syntax/parser.go to
get "go build -toolexec='toolstash -cmp' std cmd" passing. There are
still a few remaining cases only triggered building unit tests, but
this seems like a nice checkpoint.
Change-Id: Iaf3bbcf2849857a460496f31eea228e0c585ce13
Reviewed-on: https://go-review.googlesource.com/28226
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Syntax tree nodes, scanner, parser, basic printers.
Builds syntax trees for entire Go std lib at a rate of ~1.8M lines/s
in warmed up state (MacMini, 2.3 GHz Intel Core i7, 8GB RAM):
$ go test -run StdLib -fast
parsed 1074617 lines (2832 files) in 579.66364ms (1853863 lines/s)
allocated 282.212Mb (486.854Mb/s)
PASS
Change-Id: Ie26d9a7bf4e5ff07457aedfcc9b89f0eba72ae3f
Reviewed-on: https://go-review.googlesource.com/27195
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Russ Cox
Robert Griesemer
David Crawshaw
Austin Clements
Matthew Dempsky