Convert Embedded, Method, and Colas to bools.
I believe that this is the last of the Node fields
that can be trivially converted to bools.
No functional changes. Passes toolstash -cmp.
Change-Id: I81962ee47866596341fc60d24d6959c20cd7fc1c
Reviewed-on: https://go-review.googlesource.com/8440
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Ian complained about these in a review and then submitted the change
before I could fix them.
Change-Id: I23d890db2f3648ed1003ed3d13e7247435b913e5
Reviewed-on: https://go-review.googlesource.com/8480
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The tests in doc/progs appear to have been originally written
for use with the old test driver. At some later point,
they acquired their own test driver.
Both ran tests in serial.
This CL rewrites the current test driver in Go,
runs tests concurrently, and cleans up
historical artifacts from the old drivers.
The primary motivation is to speed up all.bash.
On my laptop, using tip, this CL reduces doc/progs test
wall time from 26s to 7s. The savings will remain
even when the compiler gets faster. Using Go 1.4,
this CL reduces test wall time from 15s to 4s.
Change-Id: Iae945a8490222beee76e8a2118a0d7956092f543
Reviewed-on: https://go-review.googlesource.com/8410
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
A quick pass through link.go, mostly removing fields that are not
used on the "creating a single object file" side of the fence.
Change-Id: I35ba41378c2c418f7df2f2f88dce65bc64a1a45d
Reviewed-on: https://go-review.googlesource.com/7672
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Bison includes suggestions about what tokens are expected in the
current state when there's only four or fewer of them. For example:
syntax error: unexpected literal 2.01, expecting semicolon or newline or }
This CL adds the same functionality to cmd/yacc, which fully restores
the previous error message behavior from Go 1.4.
Updates #9968.
Change-Id: I2c1a1677c6d829a829d812c05e8813aa8829d09c
Reviewed-on: https://go-review.googlesource.com/8494
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
It referred to the wrong architecture.
Fixes#10355.
Change-Id: I5b9d31c9f04f3106b93f94fa68c848b2518b128e
Reviewed-on: https://go-review.googlesource.com/8495
Reviewed-by: Dave Cheney <dave@cheney.net>
This fixes the formerly extremely slow conversion of floating-point
constants with large exponents (e.g., "const c = 1e1000000000" could
stall the machine).
Change-Id: I36e02158e3334d32b18743ec0c259fec77baa74f
Reviewed-on: https://go-review.googlesource.com/8466
Reviewed-by: Alan Donovan <adonovan@google.com>
Previously, a production rule like
A: B C D
would cause yacc to check that A and B have the same declared types,
but then it would generate an implicit action of { $$ = $3 } (i.e.,
copy the value from D), even if A and D have different types.
Fixes#10192.
Change-Id: I51cfd7baa0011557141dca33b7af1d892cc6f49e
Reviewed-on: https://go-review.googlesource.com/7780
Reviewed-by: Russ Cox <rsc@golang.org>
I wrote some code that added a function in gentext() by sticking it
after Ctxt.Etextp and was very confused when this wasn't written out
sometimes. It turned out that Etextp was not updated by deadcode() so
if the last function is not reachable, my new function was never
seen. This changes deadcode() to update Etextp to the last reachable
funtion.
Change-Id: Ib6a3e7c67ccfb8a15826ce9e0ef046732b5e25d2
Reviewed-on: https://go-review.googlesource.com/8233
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL extends cmd/yacc to expose a yyErrorVerbose variable that
changes the error messages from just "syntax error" to "syntax error:
unexpected ${tokname}".
It also moves the yyToknames table generation to after rules have been
processed so that entries can be generated for tokens that aren't
mentioned in the preamble (e.g., '.' in the case of go.y).
Lastly, it restores gc's old code for applying yytfix to yyToknames,
except that substituting "LLITERAL" with litbuf happens in Yyerror.
Fixes#9968.
Change-Id: Icec188d11fdabc1dae31b8a471c35b5c7f6deec7
Reviewed-on: https://go-review.googlesource.com/8432
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Aside from removing the superfluous comment near syms, this diff is
entirely mechanically generated via Emacs's query-replace-regexp to
replace "^\tstruct {\n[^}]*}" with "\t".
Change-Id: Ide7e4b5995f6a121b3f57415e033933ac5c7431a
Reviewed-on: https://go-review.googlesource.com/8427
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Russ Cox <rsc@golang.org>
These registers are not available for programs to use. Prior to this
change, the compiler would crash attempting to use ZR as a general
purpose register. Other programs would compile but on execution would
overwrite the G register and cause havoc.
Fixes linux/arm64 build.
Fixes#10304Fixes#10320
Change-Id: I5cf51d3b77cfe3db7dd6377324950cafb02f8d8b
Reviewed-on: https://go-review.googlesource.com/8456
Reviewed-by: Minux Ma <minux@golang.org>
The original implementation used 16 int "words" but only 29 bits per word
for a total of 16*29 = 464 bits, with a space consumption of 16*64 = 1024
bits on a 64 bit machine. Switching to 512 bits increases precision while
still using (in the worst case) half the amount of memory per mp value on
a 64 bit machine.
Also: Decreased permitted number of least-significant mantissa bits which
may be incorrect when considering if a precise floating-point constant is
an integer from 29 to 16 bits.
Change-Id: Iee9287056f0e9aa4f06ceac0724ff4674f710c53
Reviewed-on: https://go-review.googlesource.com/8429
Reviewed-by: Russ Cox <rsc@golang.org>
I first prototyped this change in Sept 2011, and I discarded it
because it made no difference in the obvious benchmark loop.
It still makes no difference in the obvious benchmark loop,
but in a less obvious one, doing some extra computation
around the calls to Sqrt, not making the call does have a
significant effect.
benchmark old ns/op new ns/op delta
BenchmarkSqrt 4.56 4.57 +0.22%
BenchmarkSqrtIndirect 4.56 4.56 +0.00%
BenchmarkSqrtGo 69.4 69.4 +0.00%
BenchmarkSqrtPrime 4417 3647 -17.43%
This is a warmup for using hardware expansions for some
calls to 1-line assembly routines in the runtime (for example getg).
Change-Id: Ie66be23f8c09d0f7dc4ddd7ca8a93cfce28f55a4
Reviewed-on: https://go-review.googlesource.com/8356
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
No test cases yet, but I found this while double checking the
proginfo table.
Change-Id: Ib59675c117c676c1298bcab8765ca6a8fd234de8
Reviewed-on: https://go-review.googlesource.com/8431
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Aram Hăvărneanu <aram@mgk.ro>
This is Part 2 of the change, see Part 1 here: in https://go-review.googlesource.com/#/c/7692/
Suggested by iant@, we use the library initialization entry point to:
- create a new OS thread and run the "regular" runtime init stack on
that thread
- return immediately from the main (i.e., loader) thread
- at the first CGO invocation, we wait for the runtime initialization
to complete.
The above mechanism is implemented only on linux_amd64. Next step is to
support it on linux_arm. Other platforms don't yet support shared library
compiling/linking, but we intend to use the same strategy there as well.
Change-Id: Ib2c81b1b83bee837134084b75a3beecfb8de6bf4
Reviewed-on: https://go-review.googlesource.com/8094
Run-TryBot: Srdjan Petrovic <spetrovic@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
All multi-precision arithmetic is now based on math/big.
- passes all.bash
- added test cases for fixed bugs
Fixes#7740.
Fixes#6866.
Change-Id: I67268b91766970ced3b928260053ccdce8753d58
Reviewed-on: https://go-review.googlesource.com/7912
Reviewed-by: Russ Cox <rsc@golang.org>
This restores go.errors from before 3af0d79 along with a fixed up
version of the bisonerrors AWK script, translated to Go.
However, this means Yyerror needs access to the yacc parser's state,
which is currently private. To workaround that, add a "state"
accessor method like the Lookahead method added in c7fa3c6.
Update issue #9968.
Change-Id: Ib868789e92fdb7d135442120a392457923e50121
Reviewed-on: https://go-review.googlesource.com/7270
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is vendored copy of the pure-Go version of math/big.
To update, run vendor.bash in place.
This will permit the use of the new big.Float functionality in
gc (which is not available in 1.4, the version used for bootstrapping).
Change-Id: I4dcdea875d54710005ca3fdea2e0e30422b1b46d
Reviewed-on: https://go-review.googlesource.com/7857
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Yacc generates a bunch of global variables of the form
var yyFoo = []int{...}
where yyFoo is never subsequently modified to point to a different
slice. Since these variables are implicitly compiled as
var yyFoo = ([...]int{...})[:]
anyway, by simply converting them all to
var yyFoo = [...]int{...}
we save sizeof(sliceStruct) bytes of data memory for each variable and
also make len(yyFoo) into compile-time constant expressions, which
shaves some bytes off text size:
$ size 6g.before 6g.after
text data bss dec hex filename
4598019 605968 342700 5546687 54a2bf 6g.before
4597810 605552 342700 5546062 54a04e 6g.after
Change-Id: I53c7aa6efdb2d52738013e9d337a59afbfcb2494
Reviewed-on: https://go-review.googlesource.com/7520
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Russ Cox <rsc@golang.org>
This change cleans up some of the uglyness introduced in 8fc73a39ef
by moving the gc.Use_sse into the gc.Arch struct and adjusting its
zero value to be more useful.
Change-Id: I26ff5d9ac57b3f25e936519e443de6583cdafa56
Reviewed-on: https://go-review.googlesource.com/7994
Reviewed-by: Russ Cox <rsc@golang.org>
On arm64, CMP $foo, R is encoded as from=$foo, reg=R, not as from=$foo,
to=R. The progtable entry for ACMP incorrectly described the latter
form. Because of this, the registerizer was not accounting the registers
used in CMP instructions and was incorrectly re-assigning those registers.
This was an old problem, but it only became apparent after b115c35
(cmd/internal/gc: move cgen, regalloc, et al to portable code). Previous
to this commit, the compiler used a slightly larger register set for the
temps than it used for register variables. Since it had plenty registers
dedicated to temps, the registers used in CMP instruction never clashed
with registers assigned to register variables.
Fixes#10253
Change-Id: Iedf4bd882bd59440dff310ac0f81e0f53d80d7ed
Reviewed-on: https://go-review.googlesource.com/8387
Reviewed-by: Aram Hăvărneanu <aram@mgk.ro>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
Fixes#9053
Change-Id: I7b9af3647800671f065c366a6adf9278e64ebec9
Reviewed-on: https://go-review.googlesource.com/8400
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is a follow-up to CL 7360.
It was generated with eg and gofmt -r.
The only manual changes are the unembedding in syntax.go
and backporting changes from y.go to go.y.
Passes toolstash -cmp.
Change-Id: I3d6d06ecb659809a4bc8592395d5b9a18967218e
Reviewed-on: https://go-review.googlesource.com/8053
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Nodes dominate gc's memory usage, but many fields are only used
for a subset of kinds of nodes. This change pulls out fields
used only for func-like Nodes. This reduces the size of the
Node struct on a 64-bit machine from 504 bytes to 416 bytes (-17%).
Compiling the runtime, 1.5% of nodes have a non-nil Func.
In html/template, 2.7% of nodes have a non-nil Func.
This change introduces an extra alloc and associated GC overhead
when Func is non-nil. However, when Func is nil, as it almost
always is, it spares the garbage collector scanning some Node fields.
Empirically, this change appears to be roughly neutral with regard to GC.
To keep the diff readable, this CL uses an embedded Func field.
A subsequent CL will unembed the field.
Passes toolstash -cmp.
Change-Id: Ide86aa954b097fb8e6154f0811d3691497477004
Reviewed-on: https://go-review.googlesource.com/7360
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
cmd/gofmt and go/format had 3 functions (parse, format and isSpace)
that had to be kept in-sync.
This CL extracts these 3 functions and refactors them into a new
internal/format package.
This CL is just code reorganization with no behavior nor semantic
change.
Change-Id: I593f24e9d3cadbbd9559a67e3b1d2ff190b4fd90
Reviewed-on: https://go-review.googlesource.com/6760
Reviewed-by: Robert Griesemer <gri@golang.org>
The c2go translation left a lot of case expressions on separate lines.
Merge expressions onto single lines subject to these constraints:
* Max 4 clauses, all literals or names
* Don't move expressions with comments
The change was created by running http://play.golang.org/p/yHajs72h-g:
$ mergecase cmd/internal/{ld,gc,obj}/*.go cmd/internal/obj/*/*.go
Passes toolstash -cmp.
Change-Id: Iba41b390d302e5486e5dc6ba7599a92270676556
Reviewed-on: https://go-review.googlesource.com/7593
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
This makes it cheaper to copy string literals.
This happens just about anywhere that they are used.
Example:
func f() string {
return "f"
}
Using 6g, compiler output before:
"".f t=1 size=32 value=0 args=0x10 locals=0x0
0x0000 00000 (p.go:3) TEXT "".f+0(SB),4,$0-16
0x0000 00000 (p.go:3) FUNCDATA $0,gclocals·d64e51a4c4bfeaa840e480961ec6b0b3+0(SB)
0x0000 00000 (p.go:3) FUNCDATA $1,gclocals·3280bececceccd33cb74587feedb1f9f+0(SB)
0x0000 00000 (p.go:4) LEAQ go.string."f"+0(SB),BX
0x0007 00007 (p.go:4) MOVQ (BX),BP
0x000a 00010 (p.go:4) MOVQ BP,"".~r0+8(FP)
0x000f 00015 (p.go:4) MOVQ 8(BX),BP
0x0013 00019 (p.go:4) MOVQ BP,"".~r0+16(FP)
0x0018 00024 (p.go:4) RET ,
After:
"".f t=1 size=32 value=0 args=0x10 locals=0x0
0x0000 00000 (p.go:3) TEXT "".f+0(SB),4,$0-16
0x0000 00000 (p.go:3) FUNCDATA $0,gclocals·d64e51a4c4bfeaa840e480961ec6b0b3+0(SB)
0x0000 00000 (p.go:3) FUNCDATA $1,gclocals·3280bececceccd33cb74587feedb1f9f+0(SB)
0x0000 00000 (p.go:4) MOVQ $go.string."f"+16(SB),BX
0x0007 00007 (p.go:4) MOVQ BX,"".~r0+8(FP)
0x000c 00012 (p.go:4) MOVQ $1,"".~r0+16(FP)
0x0015 00021 (p.go:4) RET ,
The leading MOVQ here will be converted into a LEAQ by the linker,
but there is still a net reduction of two MOVQs.
Before:
TEXT main.f(SB)
p.go:4 0x2000 488d1d49500500 LEAQ 0x55049(IP), BX
p.go:4 0x2007 488b2b MOVQ 0(BX), BP
p.go:4 0x200a 48896c2408 MOVQ BP, 0x8(SP)
p.go:4 0x200f 488b6b08 MOVQ 0x8(BX), BP
p.go:4 0x2013 48896c2410 MOVQ BP, 0x10(SP)
p.go:4 0x2018 c3 RET
After:
TEXT main.f(SB)
p.go:4 0x2000 488d1dd94c0500 LEAQ 0x54cd9(IP), BX
p.go:4 0x2007 48895c2408 MOVQ BX, 0x8(SP)
p.go:4 0x200c 48c744241001000000 MOVQ $0x1, 0x10(SP)
p.go:4 0x2015 c3 RET
The performance improvement is small but widespread.
As a nice small example, net/url's sole benchmark using 6g:
benchmark old ns/op new ns/op delta
BenchmarkString 16372 16118 -1.55%
And with 8g:
benchmark old ns/op new ns/op delta
BenchmarkString 22034 21709 -1.47%
Change-Id: I4ce202ee7dbd4057be869e2faaaa638c28a1fff0
Reviewed-on: https://go-review.googlesource.com/2587
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
This CL is an amagamation of several fixes Canonical have made on their
fork of the cmd/go tool (packaged as gccgo-go.deb on Ubuntu 14.04+).
Additionally this CL brings gccgoToolchain.ldi() up to date with the version
that will ship in gccgo-5.0. As gccgo is most likely to be used with its
own version of the go tool that it supples it makes good sense that the libgo
version should dictate the contents of gccgotoolchain.ld()
Please see https://codereview.appspot.com/222890043/ for more details on the
issues fixed.
Change-Id: Icf7deb43f8e80b424757f1673e6bca7a0aa2a1ac
Reviewed-on: https://go-review.googlesource.com/8250
Reviewed-by: Ian Lance Taylor <iant@golang.org>
In preparation for being able to run a go program that has code
in several objects, this changes from having several linker
symbols used by the runtime into having one linker symbol that
points at a structure containing the needed data. Multiple
object support will construct a linked list of such structures.
A follow up will initialize the slices in the themoduledata
structure directly from the linker but I was aiming for a minimal
diff for now.
Change-Id: I613cce35309801cf265a1d5ae5aaca8d689c5cbf
Reviewed-on: https://go-review.googlesource.com/7441
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Relying on an importing package being linked at the same time as the
imported package does not work in the shared library world.
This also lets us remove some obscure code from the linker.
Change-Id: I57cd5447b42a1a6129b02951d44efffb10cf64be
Reviewed-on: https://go-review.googlesource.com/7797
Reviewed-by: Russ Cox <rsc@golang.org>
A residue of the automatic translation, this closure is easily rewritten
to a simpler, smaller, and faster construct.
Discovered while analyzing #10269, which I still plan to fix.
Change-Id: I76b12290280d81880c446b4cf75da633a94482d4
Reviewed-on: https://go-review.googlesource.com/8270
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Minux Ma <minux@golang.org>
For shared libraries we need to be more flexible in how these symbols
are handled (e.g. sometimes tlsg needs to be global, or you can get
a SDYNIMPORT symbol that has .Hide == true) so handling these cases
in genasmsym makes everything much more regular.
Even ignoring shared libraries, I think this is a bit cleaner.
Change-Id: If5beb093a261e79f4496183226e1765ee7aa6717
Reviewed-on: https://go-review.googlesource.com/8230
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Extend escape analysis to convT2E and conT2I. If the interface value
does not escape supply runtime with a stack buffer for the object copy.
This is a straight port from .c to .go of Dmitry's patch
Change-Id: Ic315dd50d144d94dd3324227099c116be5ca70b6
Reviewed-on: https://go-review.googlesource.com/8201
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
The false positives (var incorrectly escapes) are marked with BAD.
Change-Id: If64fabb6ea96de44a1177d9ab12e2ccc579fe0c4
Reviewed-on: https://go-review.googlesource.com/5294
Reviewed-by: Keith Randall <khr@golang.org>
We need this in order to pass the "-shared" flag to the assembler.
Change-Id: I9c15cfe4d32c1e5e8cae1b9b2c924cfd77923b55
Reviewed-on: https://go-review.googlesource.com/7694
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Suggested by iant@, this change:
- looks for a symbol _rt0_<GOARCH>_<GOOS>_lib,
- if the symbol is present, adds a new entry into the .init_array ELF
section that points to the symbol.
The end-effect is that the symbol _rt0_<GOARCH>_<GOOS>_lib will be
invoked as soon as the (ELF) shared library is loaded, which will in turn
initialize the runtime. (To be implemented.)
Change-Id: I99911a180215a6df18f8a18483d12b9b497b48f4
Reviewed-on: https://go-review.googlesource.com/7692
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
covermode is not passed to 6.out, so it should not be grouped
with the flags that are. Move it to the "local" section.
Change-Id: Id487898962e7ab7adf98b0854c2f1802116bec11
Reviewed-on: https://go-review.googlesource.com/8132
Reviewed-by: Minux Ma <minux@golang.org>
Without some hook like this, it's impossible to get a $ into the generate
command, which is necessary if you're trying to do some shell scripting
or regular expressions.
We could use backslash escaping but that's already tricky enough
because the strings are processed as Go strings. Using $ like this
means we need no more mechanism, just a predefined variable.
We may need to revisit this but I hope we can avoid new quoting rules.
Change-Id: Ieb478c8cc767a866765282472239ed3c1e5669a8
Reviewed-on: https://go-review.googlesource.com/8091
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Alex Brainman
Josh Bleecher Snyder
Michael Hudson-Doyle
Matthew Dempsky
Rob Pike
Robert Griesemer
Igor Dolzhikov
Shenghou Ma
David Crawshaw
Russ Cox
Srdjan Petrovic
Dave Cheney
Michael Schaller
Sebastien Binet
David Chase
Dmitry Vyukov
Jeremy Schlatter