This CL exports the existing ir.UintptrKeepAlive via the new directive
//go:uintptrkeepalive. This makes the compiler insert KeepAlives for
pointers converted to uintptr in calls, keeping them alive for the
duration of the call.
//go:uintptrkeepalive requires //go:nosplit, as stack growth can't
handle these arguments (it cannot know which are pointers). We currently
check this on the immediate function, but the actual restriction applies
to all transitive calls.
The existing //go:uintptrescapes is an extension of
//go:uintptrkeepalive which forces pointers to escape to the heap, thus
eliminating the stack growth issue.
This pragma is limited to the standard library.
For #51087
Change-Id: If9a19d484d3561b4219e5539b70c11a3cc09391e
Reviewed-on: https://go-review.googlesource.com/c/go/+/388095
Run-TryBot: Michael Pratt <mpratt@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Performance is kind of hard to exactly quantify.
One big difference between jump tables and the old binary search
scheme is that there's only 1 branch statement instead of O(n) of
them. That can be both a blessing and a curse, and can make evaluating
jump tables very hard to do.
The single branch can become a choke point for the hardware branch
predictor. A branch table jump must fit all of its state in a single
branch predictor entry (technically, a branch target predictor entry).
With binary search that predictor state can be spread among lots of
entries. In cases where the case selection is repetitive and thus
predictable, binary search can perform better.
The big win for a jump table is that it doesn't consume so much of the
branch predictor's resources. But that benefit is essentially never
observed in microbenchmarks, because the branch predictor can easily
keep state for all the binary search branches in a microbenchmark. So
that benefit is really hard to measure.
So predictable switch microbenchmarks are ~useless - they will almost
always favor the binary search scheme. Fully unpredictable switch
microbenchmarks are better, as they aren't lying to us quite so
much. In a perfectly unpredictable situation, a jump table will expect
to incur 1-1/N branch mispredicts, where a binary search would incur
lg(N)/2 of them. That makes the crossover point at about N=4. But of
course switches in real programs are seldom fully unpredictable, so
we'll use a higher crossover point.
Beyond the branch predictor, jump tables tend to execute more
instructions per switch but have no additional instructions per case,
which also argues for a larger crossover.
As far as code size goes, with this CL cmd/go has a slightly smaller
code segment and a slightly larger overall size (from the jump tables
themselves which live in the data segment).
This is a case where some FDO (feedback-directed optimization) would
be really nice to have. #28262
Some large-program benchmarks might help make the case for this
CL. Especially if we can turn on branch mispredict counters so we can
see how much using jump tables can free up branch prediction resources
that can be gainfully used elsewhere in the program.
name old time/op new time/op delta
Switch8Predictable 1.89ns ± 2% 1.27ns ± 3% -32.58% (p=0.000 n=9+10)
Switch8Unpredictable 9.33ns ± 1% 7.50ns ± 1% -19.60% (p=0.000 n=10+9)
Switch32Predictable 2.20ns ± 2% 1.64ns ± 1% -25.39% (p=0.000 n=10+9)
Switch32Unpredictable 10.0ns ± 2% 7.6ns ± 2% -24.04% (p=0.000 n=10+10)
Fixes#5496
Update #34381
Change-Id: I3ff56011d02be53f605ca5fd3fb96b905517c34f
Reviewed-on: https://go-review.googlesource.com/c/go/+/357330
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@google.com>
[This CL is part of a sequence implementing the proposal #51082.
The design doc is at https://go.dev/s/godocfmt-design.]
Run the updated gofmt, which reformats doc comments,
on the main repository. Vendored files are excluded.
For #51082.
Change-Id: I7332f099b60f716295fb34719c98c04eb1a85407
Reviewed-on: https://go-review.googlesource.com/c/go/+/384268
Reviewed-by: Jonathan Amsterdam <jba@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
And use base.Fatalf in code that use n.SetDiag(true) instead.
Updates #51691
Change-Id: Ib3c0b9c89b8d95717391cbe7d424240e288ada1c
Reviewed-on: https://go-review.googlesource.com/c/go/+/394575
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
CL 392918 changed n.Diag() to always return false, we can now get rid
of all its deadcode paths.
Updates #51691
Change-Id: I64c07970493e7bdcf89df9508ce88132ef4aa4d7
Reviewed-on: https://go-review.googlesource.com/c/go/+/393915
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
OIOTA used to be used to represent "iota" in the pre-typechecked IR,
before we knew whether it was safe to replace it with a constant
(because it could be redefined as a global symbol later).
However, now types2 handles constant folding, including handling of
"iota". So this can go away.
Updates #51691.
Change-Id: I3cec45b22c4c8f1c357dcc4003292c21ae32aa90
Reviewed-on: https://go-review.googlesource.com/c/go/+/393255
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
ir.PkgName was only used by the old -G=0 frontend for representing
identifiers that refer to a package name. The new types2-based
frontends directly resolve the qualified identifier to the respective
object during IR construction.
Similarly, most of the ir.*Type nodes were only needed for
representing types in the IR prior to type checking. The new
types2-based frontends directly construct the corresponding types.Type
instead.
Exception: The internal typecheck.DeclFunc API used for
compiler-generated functions still depends on ir.FuncType, so that IR
node type is retained for now. (Eventually, we should update
typecheck.DeclFunc and callers to not depend on it, but it's not
urgent.)
Change-Id: I982f1bbd41eef5b42ce0f32676c7dc4a8ab6d0ee
Reviewed-on: https://go-review.googlesource.com/c/go/+/388538
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
It causes a crash because of the unexpected XDOT operation. It's not
needed, since we will run ComputeAddrTaken() on function instantiations
after stenciling. And it's not always correct, since we may not be able
to distinguish between a array and a slice, if a type is dependent on a
type param.
However, we do need to call ComputeAddrTaken on instantiations created
during inlining, since that is after the main ComputeAddrTaken pass.
Fixes#49659
Change-Id: I0bb610cf11f14e4aa9068f6ca2a012337b069c79
Reviewed-on: https://go-review.googlesource.com/c/go/+/365214
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Add a new dynamicType node, which is used as a case entry when
the type being switched to is generic.
Change-Id: Ice77c6f224b8fdd3ff574fdf4a8ea5f6c7ddbe75
Reviewed-on: https://go-review.googlesource.com/c/go/+/339429
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Introduce new dynamic dottype operations which take a dynamic
instead of static type to convert to.
Change-Id: I5824a1fea056fe811b1226ce059e1e8da1baa335
Reviewed-on: https://go-review.googlesource.com/c/go/+/337609
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
This operation computes just the data field needed to put its argument
into an interface. Used by generics because we produce the type field
of an interface using dictionaries (instead of statically).
With this operation defined, we can now assert that shape types
are never marked as used in interfaces (the only previous use
was IDATA(CONVIFACE(t))).
Change-Id: Idb1eb5f3b238285cb99413d382599c0621b7681a
Reviewed-on: https://go-review.googlesource.com/c/go/+/337109
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Go spec call them "method values", not "partial calls". Note that
we use "OMETHVALUE" (as opposed to "OMETHODVALUE") to be consistent
with "OMETHEXPR".
Change-Id: I1efd985d4b567a1b4b20aeb603eb82db579edbd5
Reviewed-on: https://go-review.googlesource.com/c/go/+/330837
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This CLs adds new frontend ops that will be used in the next CL. Split
out separately so generated code is less distracting in the main CL.
Change-Id: I66125e0ec2217bfa05f7b0ea0bc99ada13f563f7
Reviewed-on: https://go-review.googlesource.com/c/go/+/330191
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
This CL removes the special escape analysis tags added to support
//go:uintptrescapes and calls to external functions. Instead, these
are kept as function pragmas.
This CL by itself isn't very interesting, but I expect will help with
subsequent cleanups I have planned here.
Change-Id: Ifb960289a27e0a6295ce2d2f5ec233cac590522b
Reviewed-on: https://go-review.googlesource.com/c/go/+/329969
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Matthew Dempsky <mdempsky@google.com>
This CL just adds some additional details to existing Fatalf messages
that make them more useful for identifying what went wrong.
Change-Id: Icba0d943ccfb1b810a1ede0977cc8cf22b2afde5
Reviewed-on: https://go-review.googlesource.com/c/go/+/320612
Trust: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
It is not used anywhere.
Change-Id: I2b8d64902e16893ab5e1b84943f6d865c6e9c7bd
Reviewed-on: https://go-review.googlesource.com/c/go/+/311950
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
After Russquake, all the Node ops now have different structure, update
comment to reflect that.
Change-Id: I43f859783cda457528ae4d2da9857f2cc0438b62
Reviewed-on: https://go-review.googlesource.com/c/go/+/311949
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Changed RParams in types.Type to be a pointer to a slice, rather than a
slice itself, in order to reduce it from three words to one words, since
the large majority of types will not be generic or instantiated from a
generic type.
Additional cleanup: remove operation OTYPEINST, which we don't have need
of, since all type instantiations are either handled by types2 or happen
automatically during some form of stenciling.
Both of these are useful cleanups before the Go 1.17 freeze.
Change-Id: I61ad56b3c698b30d2cb5a2cdd12263202c54f49c
Reviewed-on: https://go-review.googlesource.com/c/go/+/308770
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
For additions, compares, and slices, create transform functions that do
just the transformations for those nodes by the typecheck package (given
that the code has been fully typechecked by types2). For nodes that have
no args with typeparams, we call these transform functions directly in
noder2. But for nodes that have args with typeparams, we have to delay
and call the tranform functions during stenciling, since we don't know
the specific types involved.
We indicate that a node still needs transformation by setting Typecheck
to a new value 3. This value means the current type of the node has been
set (via types2), but the node may still need transformation.
Had to export typcheck.IsCmp and typecheck.Assignop from the typecheck
package.
Added new tests list2.go (required delaying compare typecheck/transform
because of != compare in checkList) and adder.go (requires delaying add
typecheck/transform, since it can do addition for numbers or strings).
There are several more transformation functions needed for expressions
(indexing, calls, etc.) and several more complicated ones needed for
statements (mainly various kinds of assignments).
Change-Id: I7d89d13a4108308ea0304a4b815ab60b40c59b0a
Reviewed-on: https://go-review.googlesource.com/c/go/+/303091
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Dan Scales <danscales@google.com>
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Plumb abi information into ssa/ssagen for plain calls
and plain functions (not methods). Does not extend all the
way through the compiler (yet).
One test disabled because it extends far enough to break the test.
Normalized all the compiler's register args TODOs to
// TODO(register args) ...
For #40724.
Change-Id: I0173a4579f032ac3c9db3aef1749d40da5ea01ff
Reviewed-on: https://go-review.googlesource.com/c/go/+/293389
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Expresses things more clearly, especially in cases like 'f := min[int]'
where we create a xsgeneric function instantiation, but don't immediately
call it.
min[int](2, 3) now looks like:
. CALLFUNC tc(1) Use:1 int # min1.go:11 int
. . FUNCINST tc(1) FUNC-func(int, int) int # min1.go:11 FUNC-func(int, int) int
. . . NAME-main.min tc(1) Class:PFUNC Offset:0 Used FUNC-func[T](T, T) T # min1.go:3
. . FUNCINST-Targs
. . . TYPE .int Offset:0 type int
. CALLFUNC-Args
. . LITERAL-2 tc(1) int # min1.go:11
. . LITERAL-3 tc(1) int # min1.go:11
Remove the targs parameter from ir.NewCallExpr(), not needed anymore,
since type arguments are included in the FUNCINST.
Change-Id: I23438b75288330475294d7ace239ba64acfa641e
Reviewed-on: https://go-review.googlesource.com/c/go/+/288951
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Dan Scales <danscales@google.com>
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Will now run "go tool compile -G=2 -W=2" on a simple generic function
with multiple type parameters and a call to that function with multiple
explicit type arguments.
We will likely move to have a separate function/type instantiation node,
in order distinguish these cases from normal index expressions.
Change-Id: I0a571902d63785cc06240ed4ba0495923403b511
Reviewed-on: https://go-review.googlesource.com/c/go/+/288433
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
I have exporting, importing, and inlining of functions with closures
working in all cases (issue #28727). all.bash runs successfully without
errors.
Approach:
- Write out the Func type, Dcls, ClosureVars, and Body when exporting
an OCLOSURE.
- When importing an OCLOSURE, read in the type, dcls, closure vars,
and body, and then do roughly equivalent code to (*noder).funcLit
- During inlining of a closure within inlined function, create new
nodes for all params and local variables (including closure
variables), so they can have a new Curfn and some other field
values. Must substitute not only on the Nbody of the closure, but
also the Type, Cvars, and Dcl fields.
Fixes#28727
Change-Id: I4da1e2567c3fa31a5121afbe82dc4e5ee32b3170
Reviewed-on: https://go-review.googlesource.com/c/go/+/283112
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
This CL splits out ORETJMP as a new TailCallStmt node, separate from
the other BranchStmt nodes. In doing so, this allows us to change it
from identifying a function by *types.Sym to identifying one by
directly pointing to the *ir.Func.
While here, also rename the operation to OTAILCALL.
Passes toolstash -cmp.
Change-Id: I273e6ea5d92bf3005ae02fb59b3240a190a6cf1b
Reviewed-on: https://go-review.googlesource.com/c/go/+/284227
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
After CL 284220, we now only need to detect expressions that contain
function calls in the arguments list of further function calls. So we
can simplify Node.HasCall/fncall/etc a lot.
Instead of incrementally tracking whether an expression contains
function calls all throughout walk, simply check once at the point of
using an expression as a function call argument. Since any expression
checked here will itself become a function call argument, it won't be
checked again because we'll short circuit at the enclosing function
call.
Also, restructure the recursive walk code to use mayCall, and trim
down the list of acceptable expressions. It should be okay to be
stricter, since we'll now only see function call arguments and after
they've already been walked.
It's possible I was overly aggressive removing Ops here. But if so,
we'll get an ICE, and it'll be easy to re-add them. I think this is
better than the alternative of accidentally allowing expressions
through that risk silently clobbering the stack.
Passes toolstash -cmp.
Change-Id: I585ef35dcccd9f4018e4bf2c3f9ccb1514a826f3
Reviewed-on: https://go-review.googlesource.com/c/go/+/284223
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
After CL 283233, SSA can now handle new(typ) without the frontend to
generate the type address, so we can remove ONEWOBJ in favor of ONEW
only.
This is also not save for toolstash, the same reason with CL 284115.
Change-Id: Ie03ea36b3b6f95fc7ce080376c6f7afc402d51a3
Reviewed-on: https://go-review.googlesource.com/c/go/+/284117
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This only works for functions; if you try it with a method, it will
fail. It does work for both local package and imports. For now,
it tells you when it thinks it sees either a declaration or a call of
such a function (this will normally be silent since no existing
code uses this pragma).
Note: it appears to be really darn hard to figure out if this
pragma was set for a method, and the method's call site. Better
ir.Node wranglers than I might be able to make headway, but it
seemed unnecessary for this experiment.
Change-Id: I601c2ddd124457bf6d62f714d7ac871705743c0a
Reviewed-on: https://go-review.googlesource.com/c/go/+/279521
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
After the previous CLs, all closure reads are handled during SSA
construction.
Change-Id: Iad67b01fa2d3798f50ea647be7ccf8195f189c27
Reviewed-on: https://go-review.googlesource.com/c/go/+/281512
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
For OINDEX expressions, ir.OuterValue depends on knowing the indexee's
type. Rather than silently acting as though it's not an array, make it
loudly fail.
The only code that needs to be fixed to support this is checkassign
during typechecking, which needs to avoid calling ir.OuterValue now if
typechecking the assigned operand already failed.
Passes toolstash -cmp.
Change-Id: I935cae0dacc837202bc6b63164dc2f0a6fde005c
Reviewed-on: https://go-review.googlesource.com/c/go/+/281539
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
After the previous commit, we no longer access Walkdef on anything but
ir.Names, so we can remove them from the Node interface and miniNode.
The flag bits storage should also move from miniNode.bits to
Name.flags, but the latter is already full at the moment. Leaving as a
TODO for now.
Passes toolstash -cmp.
Change-Id: I2427e4cf7bc68dc1d1529f40fb93dd9f7a9149f6
Reviewed-on: https://go-review.googlesource.com/c/go/+/281005
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Just "=". It's cleaner.
Passes toolstash -cmp.
[git-generate]
cd src/cmd/compile/internal/ir
pkgs=$(go list . ../...)
rf '
ex '"$(echo $pkgs)"' {
var l Nodes
var p *Nodes
p.Set(l) -> *p = l
}
ex '"$(echo $pkgs)"' {
var n InitNode
var l Nodes
*n.PtrInit() = l -> n.SetInit(l)
}
rm Nodes.Set
'
Change-Id: Ic97219792243667146a02776553942ae1189ff7d
Reviewed-on: https://go-review.googlesource.com/c/go/+/281002
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
This CL separates out PtrInit and SetInit into a new InitNode
extension interface, and adds a new TakeInit helper function for
taking and clearing the Init list (if any) from a Node.
This allows removing miniNode.SetInit and miniNode.PtrInit, which in
turn allow getting rid of immutableEmptyNodes, and will allow
simplification of the Nodes API.
It would be nice to get rid of the default Init method too, but
there's way more code that expects to be able to call that at the
moment, so that'll have to wait.
Passes toolstash -cmp.
Change-Id: Ia8c18fab9555b774376f7f43eeecfde4f07b5946
Reviewed-on: https://go-review.googlesource.com/c/go/+/281001
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
After using the IR visitor code for a bit, it seems clear that a
simple boolean result type is adequate for tree traversals. This CL
updates ir.DoChildren to use the same calling convention as ir.Any,
and updates mknode.go to generate code accordingly.
There were only two places where the error-based DoChildren API was
used within the compiler:
1. Within typechecking, marking statements that contain "break". This
code never returns errors anyway, so it's trivially updated to return
false instead.
2. Within inlining, the "hairy visitor" actually does make use of
returning errors. However, it threads through a reference to the
hairyVisitor anyway, where it would be trivial to store any needed
information instead. For the purpose of this CL, we provide
"errChildren" and "errList" helper functions that provide the previous
error-based semantics on top of the new bool-based API.
Passes toolstash -cmp.
Change-Id: I4bac9a697b4dbfb5f66eeac37d4a2ced2073d7d0
Reviewed-on: https://go-review.googlesource.com/c/go/+/280675
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Escape analysis uses Node.Opt to map nodes to their "location", so
that other references to the same node use the same location
again. But in the current implementation of escape analysis, we never
need to refer back to a node's location except for named nodes (since
other nodes are anonymous, and have no way to be referenced).
This CL moves Opt from Node down to Name, turns it into a directly
accessed field, and cleans up escape analysis to avoid setting Opt on
non-named expressions.
One nit: in walkCheckPtrArithmetic, we were abusing Opt as a way to
detect/prevent loops. This CL adds a CheckPtr bit flag instead.
Passes toolstash -cmp.
Change-Id: If57d5ad8d972fa63bedbe69b9ebb6753e31aba85
Reviewed-on: https://go-review.googlesource.com/c/go/+/280638
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
During recent refactoring, we moved mkbuiltin.go to package typecheck,
but accidentally duplicated its //go:generate directive into a bunch
of other files/directories. This CL cleans up the unnecessary
duplicates.
Also, update all of the stringer invocations to use an explicit file
name, and regenerate their files.
Updates #43369.
Change-Id: I4e493c1fff103d742de0a839d7a3375659270b50
Reviewed-on: https://go-review.googlesource.com/c/go/+/280635
Trust: Matthew Dempsky <mdempsky@google.com>
Trust: Meng Zhuo <mzh@golangcn.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Meng Zhuo <mzh@golangcn.org>
An automated rewrite will add concrete type assertions after
a test of n.Op(), when n can be safely type-asserted
(meaning, n is not reassigned a different type, n is not reassigned
and then used outside the scope of the type assertion,
and so on).
This sequence of CLs handles the code that the automated
rewrite does not: adding specific types to function arguments,
adjusting code not to call n.Left() etc when n may have multiple
representations, and so on.
This CL focuses on sinit.go.
Passes buildall w/ toolstash -cmp.
Change-Id: I3e9458e69a7a9b3f2fe139382bf961bc4473cc42
Reviewed-on: https://go-review.googlesource.com/c/go/+/277928
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Previous CL uses OSELRECV2 instead of OSELRECV, this CL removes it.
Make this a separated CL as it's not safe for toolstash.
Change-Id: I530ba33fd9311904545e40fe147829af629cf4a8
Reviewed-on: https://go-review.googlesource.com/c/go/+/275459
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The initorder pass is already making heavy use of maps,
and it is concerned with relatively few nodes (only the assignments
in package-level variable declarations). The tracking of init order
for these nodes can be done with another map instead of storing
the bits directly in the Node representations.
This will let us drop Offset_ from AssignStmt and AssignListStmt
and drop Initorder from all nodes.
Passes buildall w/ toolstash -cmp.
Change-Id: I151c64e84670292c2004da4e8e3d0660a88e3df3
Reviewed-on: https://go-review.googlesource.com/c/go/+/277917
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Michael Pratt
Keith Randall
Russ Cox
Cuong Manh Le
Matthew Dempsky
zhangjian
Dan Scales
kumakichi
Josh Bleecher Snyder
David Chase