In the situation where the Client.Jar is set and the Request.Header
has cookies manually inserted, the redirect logic needs to be
able to apply changes to cookies from "Set-Cookie" headers to both
the Jar and the manually inserted Header cookies.
Since Header cookies lack information about the original domain
and path, the logic in this CL simply removes cookies from the
initial Header if any subsequent "Set-Cookie" matches. Thus,
in the event of cookie conflicts, the logic preserves the behavior
prior to change made in golang.org/cl/28930.
Fixes#17494
Updates #4800
Change-Id: I645194d9f97ff4d95bd07ca36de1d6cdf2f32429
Reviewed-on: https://go-review.googlesource.com/31435
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Now that sweeping and span marking use the sweep list, there's no need
for the work.spans snapshot of the allspans list. This change
eliminates the few remaining uses of it, which are either dead code or
can use allspans directly, and removes work.spans and its support
functions.
Change-Id: Id5388b42b1e68e8baee853d8eafb8bb4ff95bb43
Reviewed-on: https://go-review.googlesource.com/30537
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently markrootSpans iterates over all spans ever allocated to find
the in-use spans. Since we now have a list of in-use spans, change it
to iterate over that instead.
This, combined with the previous change, fixes#9265. Before these two
changes, blowing up the heap to 8GB and then shrinking it to a 0MB
live set caused the small-heap portion of the test to run 60x slower
than without the initial blowup. With these two changes, the time is
indistinguishable.
No significant effect on other benchmarks.
Change-Id: I4a27e533efecfb5d18cba3a87c0181a81d0ddc1e
Reviewed-on: https://go-review.googlesource.com/30536
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently sweeping walks the list of all spans, which means the work
in sweeping is proportional to the maximum number of spans ever used.
If the heap was once large but is now small, this causes an
amortization failure: on a small heap, GCs happen frequently, but a
full sweep still has to happen in each GC cycle, which means we spent
a lot of time in sweeping.
Fix this by creating a separate list consisting of just the in-use
spans to be swept, so sweeping is proportional to the number of in-use
spans (which is proportional to the live heap). Specifically, we
create two lists: a list of unswept in-use spans and a list of swept
in-use spans. At the start of the sweep cycle, the swept list becomes
the unswept list and the new swept list is empty. Allocating a new
in-use span adds it to the swept list. Sweeping moves spans from the
unswept list to the swept list.
This fixes the amortization problem because a shrinking heap moves
spans off the unswept list without adding them to the swept list,
reducing the time required by the next sweep cycle.
Updates #9265. This fix eliminates almost all of the time spent in
sweepone; however, markrootSpans has essentially the same bug, so now
the test program from this issue spends all of its time in
markrootSpans.
No significant effect on other benchmarks.
Change-Id: Ib382e82790aad907da1c127e62b3ab45d7a4ac1e
Reviewed-on: https://go-review.googlesource.com/30535
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently we set the len and cap of h.spans to the full reserved
region of the address space and track the actual mapped region
separately in h.spans_mapped. Since we have both the len and cap at
our disposal, change things so len(h.spans) tracks how much of the
spans array is mapped and eliminate h.spans_mapped. This simplifies
mheap and means we'll get nice "index out of bounds" exceptions if we
do try to go off the end of the spans rather than a SIGSEGV.
Change-Id: I8ed9a1a9a844d90e9fd2e269add4704623dbdfe6
Reviewed-on: https://go-review.googlesource.com/30533
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Like h_allspans and mheap_.allspans, these were two ways of referring
to the spans array from when the runtime was split between C and Go.
Clean this up by making mheap_.spans a slice and eliminating h_spans.
Change-Id: I3aa7038d53c3a4252050aa33e468c48dfed0b70e
Reviewed-on: https://go-review.googlesource.com/30532
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
This was necessary in the C days when allspans was an mspan**, but now
that allspans is a Go slice, this is redundant with len(allspans) and
we can use range loops over allspans.
Change-Id: Ie1dc39611e574e29a896e01690582933f4c5be7e
Reviewed-on: https://go-review.googlesource.com/30531
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
These are two ways to refer to the allspans array that hark back to
when the runtime was split between C and Go. Clean this up by making
mheap_.allspans a slice and eliminating h_allspans.
Change-Id: Ic9360d040cf3eb590b5dfbab0b82e8ace8525610
Reviewed-on: https://go-review.googlesource.com/30530
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
When the compiler insert write barriers, the frontend makes
conservative decisions at an early stage. This may have false
positives which result in write barriers for stack writes.
A new phase, writebarrier, is added to the SSA backend, to delay
the decision and eliminate false positives. The frontend still
makes conservative decisions. When building SSA, instead of
emitting runtime calls directly, it emits WB ops (StoreWB,
MoveWB, etc.), which will be expanded to branches and runtime
calls in writebarrier phase. Writes to static locations on stack
are detected and write barriers are removed.
All write barriers of stack writes found by the script from
issue #17330 are eliminated (except two false positives).
Fixes#17330.
Change-Id: I9bd66333da9d0ceb64dcaa3c6f33502798d1a0f8
Reviewed-on: https://go-review.googlesource.com/31131
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
The runtime traceback code assumes non-empty frame has link
link register saved on LR architectures. Make sure it is so in
the assember.
Also make sure that LR is stored before update SP, so the traceback
code will not see a half-updated stack frame if a signal comes
during the execution of function prologue.
Fixes#17381.
Change-Id: I668b04501999b7f9b080275a2d1f8a57029cbbb3
Reviewed-on: https://go-review.googlesource.com/31760
Reviewed-by: Michael Munday <munday@ca.ibm.com>
Update the ppc64x disassembly code for use by objdump
from golang.org/x/arch/ppc64/ppc64asm commit fcea5ea.
Enable the objdump testcase for external linking on ppc64le
make a minor fix to the expected output.
Fixes#17447
Change-Id: I769cc7f8bfade594690a476dfe77ab33677ac03b
Reviewed-on: https://go-review.googlesource.com/32015
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
For historical reasons, the go/doc package does not include
the methods within an interface as part of the documented
methods for that type. Thus,
go doc ast.Node.Pos
gives an incorrect and confusing error message:
doc: no method Node.Pos in package go/ast
This CL does some dirty work to dig down to the methods
so interface methods now present their documentation:
% go doc ast.node.pos
func Pos() token.Pos // position of first character belonging to the node
%
It must largely sidestep the doc package to do this, which
is a shame. Perhaps things will improve there one day.
The change does not handle embeddings, and in principle the
same approach could be done for struct fields, but that is also
not here yet. But this CL fixes the thing that was bugging me.
Change-Id: Ic10a91936da96f54ee0b2f4a4fe4a8c9b93a5b4a
Reviewed-on: https://go-review.googlesource.com/31852
Reviewed-by: Robert Griesemer <gri@golang.org>
Instead of generating typelink symbols in the compiler
mark types that should have typelinks with a flag.
The linker detects this flag and adds the marked types
to the typelink table.
name old s/op new s/op delta
LinkCmdCompile 0.27 ± 6% 0.25 ± 6% -6.93% (p=0.000 n=97+98)
LinkCmdGo 0.30 ± 5% 0.29 ±10% -4.22% (p=0.000 n=97+99)
name old MaxRSS new MaxRSS delta
LinkCmdCompile 112k ± 3% 106k ± 2% -4.85% (p=0.000 n=100+100)
LinkCmdGo 107k ± 3% 103k ± 3% -3.00% (p=0.000 n=100+100)
Change-Id: Ic95dd4b0101e90c1fa262c9c6c03a2028d6b3623
Reviewed-on: https://go-review.googlesource.com/31772
Run-TryBot: Shahar Kohanim <skohanim@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The condition to determine if any further iterations are needed is
evaluated to false in case it encounters a NaN. Instead, flip the
condition to keep looping until the factor is greater than the machine
roundoff error.
Updates #17577
Change-Id: I058abe73fcd49d3ae4e2f7b33020437cc8f290c3
Reviewed-on: https://go-review.googlesource.com/31952
Reviewed-by: Robert Griesemer <gri@golang.org>
In sinit.go, gdata can already handle strings and complex, so no
reason to handle them separately.
In obj.go, inline gdatastring and gdatacomplex into gdata, since it's
the only caller. Allows extracting out the common Linksym calls.
Passes toolstash -cmp.
Change-Id: I3cb18d9b4206a8a269c36e0d30a345d8e6caba1f
Reviewed-on: https://go-review.googlesource.com/31498
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
It no longer exists as of CL 31010.
Change-Id: Idd61f392544cad8b3f3f8d984dc5c953b473e2e5
Reviewed-on: https://go-review.googlesource.com/31934
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Some original shift opcodes for ppc64x expected an operand to be
a mask instead of a shift count, preventing some valid shift counts
from being written.
This adds new opcodes for shifts where needed, using mnemonics that
match the ppc64 asm and allowing the assembler to accept the full set
of valid shift counts.
Fixes#15016
Change-Id: Id573489f852038d06def279c13fd0523736878a7
Reviewed-on: https://go-review.googlesource.com/31853
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
Reviewed-by: David Chase <drchase@google.com>
These are emulated by the assembler and we don't need them.
Change-Id: I2b07c5315a5b642fdb5e50b468453260ae121164
Reviewed-on: https://go-review.googlesource.com/31758
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Before go supported buildmode=shared ·f symbols used to be defined
only when they were used. In order to solve #11480 the strategy
was changed to have these symbols defined on declaration which is
less efficient and generates many unneeded symbols.
With this change the best strategy is chosen for each situation,
improving static linking time:
name old s/op new s/op delta
LinkCmdCompile 0.27 ± 5% 0.25 ± 6% -8.22% (p=0.000 n=98+96)
LinkCmdGo 0.30 ± 6% 0.29 ± 8% -5.03% (p=0.000 n=95+99)
name old MaxRSS new MaxRSS delta
LinkCmdCompile 107k ± 2% 98k ± 3% -8.32% (p=0.000 n=99+100)
LinkCmdGo 106k ± 3% 104k ± 3% -1.94% (p=0.000 n=99+100)
Change-Id: I965eeee30541e724fd363804adcd6fda10f965a4
Reviewed-on: https://go-review.googlesource.com/31031
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
In general, these functions cannot behave correctly when given a
hostname, because a hostname may represent multiple IP addresses, and
first(isIPv4) chooses at most one.
Updates #9334
Change-Id: Icfb629f84af4d976476385a3071270253c0000b1
Reviewed-on: https://go-review.googlesource.com/31931
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Looking at the kernel sources, I don't see how this is possible.
But obviously it is. Just try again.
Fixes#17161.
Change-Id: Iea7d53f7cf75944792d2f75a0d07129831c7bcdb
Reviewed-on: https://go-review.googlesource.com/31823
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The old code leaves garbages in a temporary directory because it
cannot remove the current working directory on windows.
The new code changes the directory before calling os.Remove.
Furthermore, the old code assumes that ioutil.TempDir (os.TempDir)
doesn't return a relative path nor an UNC path.
If it isn't the case, the new code calls t.Fatal earlier for preventing
ambiguous errors.
Finally, the old code reassigns the variable which is used by the defer
function. It could cause unexpected results, so avoid that.
Change-Id: I5fc3902059ecaf18dc1341ecc4979d1206034cd7
Reviewed-on: https://go-review.googlesource.com/31790
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Updates #15345
Change-Id: I447d133512e99a9900928a910e161a85db6e8b75
Reviewed-on: https://go-review.googlesource.com/31792
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It appears to be a vestigial holding ground for bugs.
But we have an issue tracker, and #1909 is there and open.
Change-Id: I912ff222a24c51fab483be0c67dad534f5a84488
Reviewed-on: https://go-review.googlesource.com/31859
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
CL 31468 added TestLookupNonLDH, which was failing on Plan 9,
because LookupHost was expecting to return errNoSuchHost
on DNS resolution failure, while Plan 9 returned the
"dns failure" string.
In the Plan 9 implementation of lookupHost, we now return
errNoSuchHost instead of the "dns failure" string, so
the behavior is more consistant with other operating systems.
Fixes#17568.
Change-Id: If64f580dc0626a4a4f19e5511ba2ca5daff5f789
Reviewed-on: https://go-review.googlesource.com/31873
Run-TryBot: David du Colombier <0intro@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
VerifyPeerCertificate returns an error if the peer should not be
trusted. It will be called after the initial handshake and before
any other verification checks on the cert or chain are performed.
This provides the callee an opportunity to augment the certificate
verification.
If VerifyPeerCertificate is not nil and returns an error,
then the handshake will fail.
Fixes#16363
Change-Id: I6a22f199f0e81b6f5d5f37c54d85ab878216bb22
Reviewed-on: https://go-review.googlesource.com/26654
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This prevents the traceback code from seeing a half-updated
stack frame when a profiling signal comes during the execution
of function prologue. Also fixes mips64x part of #17381.
Change-Id: Iec9683427e546e3648b2e8b1dde956d13f6eb938
Reviewed-on: https://go-review.googlesource.com/31721
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Since CL 30614, TestCloseError is failing on Plan 9,
because File.Write now checks f.fd == badFd before
calling syscall.Write.
The f.fd == badFd check returns os.ErrClosed, while
syscall.Write returned a syscall.ErrorString error.
TestCloseError was failing because it expected a
syscall.ErrorString error.
We add a case in parseCloseError to handle the
os.ErrClosed case.
Fixes#17569.
Change-Id: I6b4d956d18ed6d3c2ac5211ffd50a4888f7521e1
Reviewed-on: https://go-review.googlesource.com/31872
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Adds a rule to generate ANDN for AND x ^y.
Fixes#17567
Change-Id: I3b978058d5663f32c42b1af19bb207eac5622615
Reviewed-on: https://go-review.googlesource.com/31769
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
The Gotype field is only used for ATYPE instructions. Instead of
specially storing the Go type symbol in From.Gotype, just store it in
To.Sym like any other 2-argument instruction would.
Modest reduction in allocations:
name old alloc/op new alloc/op delta
Template 42.0MB ± 0% 41.8MB ± 0% -0.40% (p=0.000 n=9+10)
Unicode 34.3MB ± 0% 34.1MB ± 0% -0.48% (p=0.000 n=9+10)
GoTypes 122MB ± 0% 122MB ± 0% -0.14% (p=0.000 n=9+10)
Compiler 518MB ± 0% 518MB ± 0% -0.04% (p=0.000 n=9+10)
Passes toolstash -cmp.
Change-Id: I0e603266b5d7d4e405106a26369e22773a0d3a91
Reviewed-on: https://go-review.googlesource.com/31850
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
\\?\c:\ is a "root directory" that is not subject to further matching,
but the ? makes it look like a pattern, which was causing an
infinite recursion. Make sure the code understands the ? is not a pattern.
Fixes#15879.
Change-Id: I3a4310bbc398bcae764b9f8859c875317345e757
Reviewed-on: https://go-review.googlesource.com/31460
Reviewed-by: Quentin Smith <quentin@golang.org>
RFC 3986 §3.3 disallows relative URL paths in which the first segment
contains a colon, presumably to avoid confusion with scheme:foo syntax,
which is exactly what happened in #16822.
Fixes#16822.
Change-Id: Ie4449e1dd21c5e56e3b126e086c3a0b05da7ff24
Reviewed-on: https://go-review.googlesource.com/31582
Reviewed-by: Quentin Smith <quentin@golang.org>
Fixed by CL 31092 already, but that change is a few steps away
from the problem observed here, so add an explicit test.
Fixes#17019.
Change-Id: If4ece1418e6596b1976961347889ce12c5969637
Reviewed-on: https://go-review.googlesource.com/31466
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Quentin Smith <quentin@golang.org>
All prior versions of Go have allowed redefining empty templates
to become non-empty. Unfortunately, that has never consistently
taken effect in html/template after the first execution:
// define and execute
t := template.New("root")
t.Parse(`{{define "T"}}{{end}}<a href="{{template "T"}}">`)
t.Execute(w, nil) // <a href="">
// redefine
t.Parse(`{{define "T"}}my.url{{end}}`) // succeeds, but ignored
t.Execute(w, nil) // <a href="">
When Go 1.6 added {{block...}} to text/template, that loosened the
redefinition rules to allow redefinition at any time. The loosening was
undone a bit in html/template, although inconsistently:
// define and execute
t := template.New("root")
t.Parse(`{{define "T"}}body{{end}}`)
t.Lookup("T").Execute(ioutil.Discard, nil)
// attempt to redefine
t.Parse(`{{define "T"}}body{{end}}`) // rejected in all Go versions
t.Lookup("T").Parse("body") // OK as of Go 1.6, likely unintentionally
Like in the empty->non-empty case, whether future execution takes
notice of a redefinition basically can't be explained without going into
the details of the template escape analysis.
Address both the original inconsistencies in whether a redefinition
would have any effect and the new inconsistencies about whether a
redefinition is allowed by adopting a new rule: no parsing or modifying
any templates after the first execution of any template in the same set.
Template analysis begins at first execution, and once template analysis
has begun, we simply don't have the right logic to update the analysis
for incremental modifications (and never have).
If this new rule breaks existing uses of templates that we decide need
to be supported, we can try to invalidate all escape analysis for the
entire set after any modifications. But let's wait on that until we know
we need to and why.
Also fix documentation of text/template redefinition policy
(redefinition is always OK).
Fixes#15761.
Change-Id: I7d58d7c08a7d9df2440ee0d651a5b2ecaff3006c
Reviewed-on: https://go-review.googlesource.com/31464
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
The Go resolver reports invalid domain name for '!!!.local',
but that is allowed by multicast DNS. In general we can't predict
what future relaxations might come along, and libc resolvers
do not distinguish 'no such host' from 'invalid name', so stop
making that distinction here too. Always use 'no such host'.
Fixes#12421.
Change-Id: I8f22604767ec9e270434e483da52b337833bad71
Reviewed-on: https://go-review.googlesource.com/31468
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This is the documented (and now implemented) behavior.
Fixes#16841.
Change-Id: Ic75adc5ba18303ed9578e04284f32933f905d6a3
Reviewed-on: https://go-review.googlesource.com/31577
Reviewed-by: Quentin Smith <quentin@golang.org>
If a directory in GOPATH is unreadable, we should keep looking for other
packages. Otherwise we can give the misleading error "no buildable Go
source files".
Fixes#16240
Change-Id: I38e1037f56ec463d3c141f0508fb74211cb90f13
Reviewed-on: https://go-review.googlesource.com/31713
Run-TryBot: Quentin Smith <quentin@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
What matters during go get -u is not whether there is an import comment
but whether we resolved the path by an HTML <meta> tag.
Fixes#16471.
Change-Id: I6b194a3f73a7962a0170b4d5cf51cfed74e02c00
Reviewed-on: https://go-review.googlesource.com/31658
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Quentin Smith <quentin@golang.org>
Maybe the go generate is generating the imports,
or maybe there's some other good reason the code
is incomplete.
The help text already says:
Note that go generate does not parse the file, so lines that look
like directives in comments or multiline strings will be treated
as directives.
We'll still reject Go source files that don't begin with a package statement
or have a syntax error in the import block, but those are I think more
defensible rejections.
Fixes#16307.
Change-Id: I4f8496c02fdff993f038adfed2df4db7f067dc06
Reviewed-on: https://go-review.googlesource.com/31659
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
It's always been like this, so document it.
Fixes#14351.
Change-Id: Ic6a7c44881bac0209fa6863a487fabec5ec0214e
Reviewed-on: https://go-review.googlesource.com/31663
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Quentin Smith <quentin@golang.org>
Avoid crash in the specific case reported in #15201 but also
print more useful error message, avoiding slice panic.
Fixes#15201.
Fixes#16167.
Fixes#16566.
Change-Id: I66499621e9678a05bc9b12b0da77906cd7027bdd
Reviewed-on: https://go-review.googlesource.com/31665
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Quentin Smith <quentin@golang.org>
After resizing the scan buffer, we can immediately read into the
newly-resized buffer since we know there is now space.
Fixes#15712.
Change-Id: I56fcfaeb67045ee753a012c37883aa7c81b6e877
Reviewed-on: https://go-review.googlesource.com/31715
Run-TryBot: Quentin Smith <quentin@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Makes windows same as others.
Change-Id: Ib4651e06d0bd37473ac345d36c91f39aa8f5e662
Reviewed-on: https://go-review.googlesource.com/31791
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently mspan.isFree technically returns whether the object was not
allocated *during this cycle*. Fix it so it actually returns whether
or not the object is allocated so the method is more generally useful
(especially for debugging).
It has one caller, which is carefully written to be insensitive to
this distinction, but this lets us simplify this caller.
Change-Id: I9d79cf784a56015e434961733093c1d8d03fc091
Reviewed-on: https://go-review.googlesource.com/30145
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
morestack writes the context pointer to gobuf.ctxt, but since
morestack is written in assembly (and has to be very careful with
state), it does *not* invoke the requisite write barrier for this
write. Instead, we patch this up later, in newstack, where we invoke
an explicit write barrier for ctxt.
This already requires some subtle reasoning, and it's going to get a
lot hairier with the hybrid barrier.
Fix this by simplifying the whole mechanism. Instead of writing
gobuf.ctxt in morestack, just pass the value of the context register
to newstack and let it write it to gobuf.ctxt. This is a normal Go
pointer write, so it gets the normal Go write barrier. No subtle
reasoning required.
Updates #17503.
Change-Id: Ia6bf8459bfefc6828f53682ade32c02412e4db63
Reviewed-on: https://go-review.googlesource.com/31550
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
So errnoErr can be used in other packages.
This is something I missed when I sent CL 28990.
Fixes#17539
Change-Id: I8ee3b79c4d70ca1e5b29e5b40024f7ae9a86061e
Reviewed-on: https://go-review.googlesource.com/29690
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is an alternate solution to https://golang.org/cl/31445
Instead of making NewRequest return a request with Request.Body == nil
to signal a zero byte body, add a well-known variable that means
explicitly zero.
Too many tests inside Google (and presumably the outside world)
broke.
Change-Id: I78f6ecca8e8aa1e12179c234ccfb6bcf0ee29ba8
Reviewed-on: https://go-review.googlesource.com/31726
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
This makes it possible to use URLs with gob.
Ideally we'd also implement TextMarshaler and TextUnmarshaler,
but that would change the JSON encoding of a URL from something like:
{"Scheme":"https","Opaque":"","User":null,"Host":"www.google.com","Path":"/x","RawPath":"","ForceQuery":false,"RawQuery":"y=z","Fragment":""}
to something like:
"https://www.google.com/x?y=z"
That'd be nice, but it would break code expecting the old form.
Fixes#10964.
Change-Id: I83f06bc2bedd2ba8a5d8eef03ea0056d045c258f
Reviewed-on: https://go-review.googlesource.com/31467
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Now that we have the Clone method on tls.Config, net/http doesn't need
any custom functions to do that any more.
Change-Id: Ib60707d37f1a7f9a7d7723045f83e59eceffd026
Reviewed-on: https://go-review.googlesource.com/31595
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
According to the GNU manual, the format is:
<<<
GNU.sparse.size=size
GNU.sparse.numblocks=numblocks
repeat numblocks times
GNU.sparse.offset=offset
GNU.sparse.numbytes=numbytes
end repeat
>>>
The logic in parsePAX converts the repeating sequence of
(offset, numbytes) pairs (which is not PAX compliant) into a single
comma-delimited list of numbers (which is now PAX compliant).
Thus, we validate the following:
* The (offset, numbytes) headers must come in the correct order.
* The ',' delimiter cannot appear in the value.
We do not validate that the value is a parsible decimal since that
will be determined later.
Change-Id: I8d6681021734eb997898227ae8603efb1e17c0c8
Reviewed-on: https://go-review.googlesource.com/31439
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Previously, the check to make sure we only considered constant cases
for duplicates was skipping past integer ranges, because those use
n.List instead of n.Left. Thanks to Emmanuel Odeke for investigating
and helping to identify the root cause.
Fixes#17517.
Change-Id: I46fcda8ed9c346ff3a9647d50b83f1555587b740
Reviewed-on: https://go-review.googlesource.com/31716
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Updates http2 to x/net/http2 git rev 40a0a18 for:
http2: fix Server race with concurrent Read/Close
http2: make Server reuse 64k request body buffer between requests
http2: never Read from Request.Body in Transport to determine ContentLength
Fixes#17480
Updates #17071
Change-Id: If142925764a2e148f95957f559637cfc1785ad21
Reviewed-on: https://go-review.googlesource.com/31737
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The old wording over-promised.
Fixes#16957
Change-Id: Iaac04de0d24eb17a0db66beeeab9de70d0f6d391
Reviewed-on: https://go-review.googlesource.com/31735
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Tom Bergan <tombergan@google.com>
This partially reverts commit 01bf5cc219.
For unknown reasons, this CL was causing an internal test to allocate
1.2GB when it used to allocate less than 300MB.
Change-Id: I41d767781e0ae9e43bf670e2a186ee074821eca4
Reviewed-on: https://go-review.googlesource.com/31674
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
With the old code rewriting refs would rewrite the inner arguments
rather than the outer ones, leaving a reference to C.val in the outer
arguments.
Change-Id: I9b91cb4179eccd08500d14c6591bb15acf8673eb
Reviewed-on: https://go-review.googlesource.com/31672
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This commit fixes two bizarrely related bugs:
1. The signatures for the call* functions were wrong, indicating that
they had only two pointer arguments instead of three. We didn't notice
because the call* functions are defined by a macro expansion, which go
vet doesn't see.
2. deferArgs on a defer object with a zero-sized frame returned a
pointer just past the end of the allocated object, which is illegal in
Go (and can cause the "sweep increased allocation count" crashes).
In a fascinating twist, these two bugs canceled each other out, which
is why I'm fixing them together. The pointer returned by deferArgs is
used in only two ways: as an argument to memmove and as an argument to
reflectcall. memmove is NOSPLIT, so the argument was unobservable.
reflectcall immediately tail calls one of the call* functions, which
are not NOSPLIT, but the deferArgs pointer just happened to be the
third argument that was accidentally marked as a scalar. Hence, when
the garbage collector scanned the stack, it didn't see the bad
pointer as a pointer.
I believe this was all ultimately benign. In principle, stack growth
during the reflectcall could fail to update the args pointer, but it
never points to the stack, so it never needs to be updated. Also in
principle, the garbage collector could fail to mark the args object
because of the incorrect call* signatures, but in all calls to
reflectcall (including the ones spelled "call" in the reflect package)
the args object is kept live by the calling stack.
Change-Id: Ic932c79d5f4382be23118fdd9dba9688e9169e28
Reviewed-on: https://go-review.googlesource.com/31654
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
trace's reader *g is going to cause write barriers in unfortunate
places, so replace it with a guintptr.
Change-Id: Ie8fb13bb89a78238f9d2a77ec77da703e96df8af
Reviewed-on: https://go-review.googlesource.com/31469
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Rick Hudson <rlh@golang.org>
There was some ambiguity over which argument was referred to when
a conversion error was returned. Now refer to the argument by
either explicit ordinal position or name if present.
Fixes#15676
Change-Id: Id933196b7e648baa664f4121fa3fb1b07b3c4880
Reviewed-on: https://go-review.googlesource.com/31262
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The m5 and m6 fields were the wrong way round.
Fixes#17444.
Change-Id: I10297064f2cd09d037eac581c96a011358f70aae
Reviewed-on: https://go-review.googlesource.com/31130
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Adapt old test for prove's bounds check elimination.
Added missing rule to generic rules that lead to differences
between 32 and 64 bit platforms on sliceopt test.
Added debugging to prove.go that was helpful-to-necessary to
discover that missing rule.
Lowered debugging level on prove.go from 3 to 1; no idea
why it was previously 3.
Change-Id: I09de206aeb2fced9f2796efe2bfd4a59927eda0c
Reviewed-on: https://go-review.googlesource.com/23290
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This exposes HuffmanOnly in zlib and gzip packages, which is currently
unavailable.
Change-Id: If5d103bbc8b5fce2f5d740fd103a235c5d1ed7cd
Reviewed-on: https://go-review.googlesource.com/31186
Reviewed-by: Nigel Tao <nigeltao@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This makes grayModel and gray16Model in color.go use the exact same
formula as RGBToYCbCr in ycbcr.go. They were the same formula in theory,
but in practice the color.go versions used a divide by 1000 and the
ycbcr.go versions used a (presumably faster) shift by 16.
This implies the nice property that converting an image.RGBA to an
image.YCbCr and then taking only the Y channel is equivalent to
converting an image.RGBA directly to an image.Gray.
The difference between the two formulae is non-zero, but small:
https://play.golang.org/p/qG7oe-eqHI
Updates #16251
Change-Id: I288ecb957fd6eceb9626410bd1a8084d2e4f8198
Reviewed-on: https://go-review.googlesource.com/31538
Reviewed-by: Rob Pike <r@golang.org>
For very large input files, use of GOSSAFUNC to obtain a dump
after compilation steps can lead to both unwieldy large output
files and unwieldy larger processes (because the output is
buffered in a string). This flag
-d=ssa/<phase>/dump:<function name>
provides finer control of what is dumped, into a smaller
file, and with less memory overhead in the running compiler.
The special phase name "build" is added to allow printing
of the just-built ssa before any transformations are applied.
This was helpful in making sense of the gogo/protobuf
problems.
The output format was tweaked to remove gratuitous spaces,
and a crude -d=ssa/help help text was added.
Change-Id: If7516e22203420eb6ed3614f7cee44cb9260f43e
Reviewed-on: https://go-review.googlesource.com/23044
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Fixes#16076
Change-Id: I91fa87b642592ee4604537dd8c3197cd61ec8b31
Reviewed-on: https://go-review.googlesource.com/31516
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change updates the vendored copy of x/crypto/poly1305, specifically
to include the following changes:
3ded668 poly1305: enable assembly for ARM in Go 1.6.
dec8741 poly1305: fix stack handling in sum_arm.s
Fixes#17499.
Change-Id: I8f152da9599bd15bb976f630b0ef602be05143d3
Reviewed-on: https://go-review.googlesource.com/31592
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This issue has been fixed in CL 31390.
Fixes#9554.
Change-Id: Ib8ff4cb1ffcb7cdbf117510b98b4a7e13e4efd2b
Reviewed-on: https://go-review.googlesource.com/31520
TryBot-Result: Gobot Gobot <gobot@golang.org>
Run-TryBot: David du Colombier <0intro@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Missing the DB mutex unlock on an early return after checking
if the context has expired.
Fixes#17518
Change-Id: I247cafcef62623d813f534a941f3d5a3744f0738
Reviewed-on: https://go-review.googlesource.com/31494
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Issues fixed:
* Could not handle quantity of seconds greater than 1<<31 on
32bit machines since strconv.ParseInt did not treat integers as 64b.
* Did not handle negative timestamps properly if nanoseconds were used.
Note that "-123.456" should result in a call to time.Unix(-123, -456000000).
* Incorrectly allowed a '-' right after the '.' (e.g., -123.-456)
* Did not detect invalid input after the truncation point (e.g., 123.123456789badbadbad).
Note that negative timestamps are allowed by PAX, but are not guaranteed
to be portable. See the relevant specification:
<<<
If pax encounters a file with a negative timestamp in copy or write mode,
it can reject the file, substitute a non-negative timestamp, or generate
a non-portable timestamp with a leading '-'.
>>>
Since the previous behavior already partially supported negative timestamps,
we are bound by Go's compatibility rules to keep support for them.
However, we should at least make sure we handle them properly.
Change-Id: I5686997708bfb59110ea7981175427290be737d1
Reviewed-on: https://go-review.googlesource.com/31441
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This is a more robust method for obtaining the availability of vx.
Since this variable may be checked frequently I've also now
padded it so that it will be in its own cache line.
I've kept the other check (in hash/crc32) the same for now until
I can figure out the best way to update it.
Updates #15403.
Change-Id: I74eed651afc6f6a9c5fa3b88fa6a2b0c9ecf5875
Reviewed-on: https://go-review.googlesource.com/31149
Reviewed-by: Austin Clements <austin@google.com>
oneNewExtraM creates a spare M and G for use with cgo callbacks. The G
doesn't run right away, but goes directly into syscall status. For the
garbage collector, it's marked as "scan valid" and not on the rescan
list, but I forgot to also mark it as "scan done". As a result,
gcMarkRootCheck thinks that the goroutine hasn't been scanned and
panics.
This only affects GODEBUG=gccheckmark=1 mode, since we otherwise skip
the gcMarkRootCheck.
Fixes#17473.
Change-Id: I94f5671c42eb44bd5ea7dc68fbf85f0c19e2e52c
Reviewed-on: https://go-review.googlesource.com/31139
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Updating the heap profile stats is one of the most expensive parts of
mark termination other than stack rescanning, but there's really no
need to do this with the world stopped. Move it to right after we've
started the world back up. This creates a *very* small window where
allocations from the next cycle can slip into the profile, but the
exact point where mark termination happens is so non-deterministic
already that a slight reordering here is unimportant.
Change-Id: I2f76f22c70329923ad6a594a2c26869f0736d34e
Reviewed-on: https://go-review.googlesource.com/31363
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
The only reason these flushes are still necessary at all is that
gcmarknewobject doesn't flush its gcWork stats like it's supposed to.
By changing gcmarknewobject to follow the standard protocol, the
flushes become completely unnecessary because mark 2 ensures caches
are flushed (and stay flushed) before we ever enter mark termination.
In the garbage benchmark, this takes roughly 50 µs, which is
surprisingly long for doing nothing. We still double-check after
draining that they are in fact empty.
Change-Id: Ia1c7cf98a53f72baa513792eb33eca6a0b4a7128
Reviewed-on: https://go-review.googlesource.com/31134
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
The pointer checking code needs to know the exact type of the parameter
expected by the C function, so that it can use a type assertion to
convert the empty interface returned by cgoCheckPointer to the correct
type. Previously this was done by using a type conversion, but that
meant that the code accepted arguments that were convertible to the
parameter type, rather than arguments that were assignable as in a
normal function call. In other words, some code that should not have
passed type checking was accepted.
This CL changes cgo to always use a function literal for pointer
checking. Now the argument is passed to the function literal, which has
the correct argument type, so type checking is performed just as for a
function call as it should be.
Since we now always use a function literal, simplify the checking code
to run as a statement by itself. It now no longer needs to return a
value, and we no longer need a type assertion.
This does have the cost of introducing another function call into any
call to a C function that requires pointer checking, but the cost of the
additional call should be minimal compared to the cost of pointer
checking.
Fixes#16591.
Change-Id: I220165564cf69db9fd5f746532d7f977a5b2c989
Reviewed-on: https://go-review.googlesource.com/31233
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Just happened to notice that these names (funcAlign and friends) are
never referenced outside their package, so no need to export them.
Change-Id: I4bbdaa4b0ef330c3c3ef50a2ca39593977a83545
Reviewed-on: https://go-review.googlesource.com/31496
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
mkbuiltin.go now generates builtin.go using go/ast instead of running
the compiler, so we don't need the -A flag anymore.
Passes toolstash -cmp.
Change-Id: Ifa70f4f3c9feae10c723cbec81a0a47c39610090
Reviewed-on: https://go-review.googlesource.com/31497
Reviewed-by: Robert Griesemer <gri@golang.org>
Generating binary export data requires a working Go compiler. Even
trickier to change the export data format itself requires a careful
bootstrapping procedure.
Instead, simply generate normal Go code that lets us directly
construct the builtin runtime declarations.
Passes toolstash -cmp.
Fixes#17508.
Change-Id: I4f6078a3c7507ba40072580695d57c87a5604baf
Reviewed-on: https://go-review.googlesource.com/31493
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Relevant PAX specification:
<<<
If the <value> field is zero length, it shall delete any header
block field, previously entered extended header value, or
global extended header value of the same name.
>>>
We don't delete global extender headers since the Reader doesn't
even support global headers (which the specification admits was
a controversial feature).
Change-Id: I2125a5c907b23a3dc439507ca90fa5dc47d474a9
Reviewed-on: https://go-review.googlesource.com/31440
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Took this opportunity to also embed tables in the functions
that they are actually used in and other stylistic cleanups.
There was no logical changes to the tests.
Change-Id: Ifa724060532175f6f4407d6cedc841891efd8f7b
Reviewed-on: https://go-review.googlesource.com/31436
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Add support for passing reflect.Values to and returning reflect.Values from
any registered functions in the FuncMap, much as if they were
interface{} values. Keeping the reflect.Value instead of round-tripping
to interface{} preserves addressability of the value, which is important
for method lookup.
Change index and a few other built-in functions to use reflect.Values,
making a loop using explicit indexing now match the semantics that
range has always had.
Fixes#14916.
Change-Id: Iae1a2fd9bb426886a7fcd9204f30a2d6ad4646ad
Reviewed-on: https://go-review.googlesource.com/31462
Reviewed-by: Rob Pike <r@golang.org>
The GNU format does not have a prefix field, so we should make
no attempt to read it. It does however have atime and ctime fields.
Since Go previously placed incorrect values here, we liberally
read the atime and ctime fields and ignore errors so that old tar
files written by Go can at least be partially read.
This fixes half of #12594. The Writer is much harder to fix.
Updates #12594
Change-Id: Ia32845e2f262ee53366cf41dfa935f4d770c7a30
Reviewed-on: https://go-review.googlesource.com/31444
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The panic leaves the lock in an unusable state.
Trying to panic with a usable state makes the lock significantly
less efficient and scalable (see early CL patch sets and discussion).
Instead, use runtime.throw, which will crash the program directly.
In general throw is reserved for when the runtime detects truly
serious, unrecoverable problems. This problem is certainly serious,
and, without a significant performance hit, is unrecoverable.
Fixes#13879.
Change-Id: I41920d9e2317270c6f909957d195bd8b68177f8d
Reviewed-on: https://go-review.googlesource.com/31359
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Before: ... appears in an ambiguous URL context.
After: ... appears in an ambiguous context within a URL.
It's a minor point, but it's confused multiple people.
Try to make clearer that the ambiguity is "where exactly inside the URL?"
Fixes#17319.
Change-Id: Id834868d1275578036c1b00c2bdfcd733d9d2b7b
Reviewed-on: https://go-review.googlesource.com/31465
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL makes NewRequest set Body nil for known-zero bodies, and makes
the http1 Transport not peek-Read a byte to determine whether there's
a body.
Background:
Many fields of the Request struct have different meanings for whether
they're outgoing (via the Transport) or incoming (via the Server).
For outgoing requests, ContentLength and Body are documented as:
// Body is the request's body.
//
// For client requests a nil body means the request has no
// body, such as a GET request. The HTTP Client's Transport
// is responsible for calling the Close method.
Body io.ReadCloser
// ContentLength records the length of the associated content.
// The value -1 indicates that the length is unknown.
// Values >= 0 indicate that the given number of bytes may
// be read from Body.
// For client requests, a value of 0 with a non-nil Body is
// also treated as unknown.
ContentLength int64
Because of the ambiguity of what ContentLength==0 means, the http1 and
http2 Transports previously Read the first byte of a non-nil Body when
the ContentLength was 0 to determine whether there was an actual body
(with a non-zero length) and ContentLength just wasn't populated, or
it was actually empty.
That byte-sniff has been problematic and gross (see #17480, #17071)
and was removed for http2 in a previous commit.
That means, however, that users doing:
req, _ := http.NewRequest("POST", url, strings.NewReader(""))
... would not send a Content-Length header in their http2 request,
because the size of the reader (even though it was known, being one of
the three common recognized types from NewRequest) was zero, and so
the HTTP Transport thought it was simply unset.
To signal explicitly-zero vs unset-zero, this CL changes NewRequest to
signal explicitly-zero by setting the Body to nil, instead of the
strings.NewReader("") or other zero-byte reader.
This CL also removes the byte sniff from the http1 Transport, like
https://golang.org/cl/31326 did for http2.
Updates #17480
Updates #17071
Change-Id: I329f02f124659bf7d8bc01e2c9951ebdd236b52a
Reviewed-on: https://go-review.googlesource.com/31445
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Matthew Dempsky
Keith Randall
Joe Tsai
Austin Clements
David du Colombier
Cherry Zhang
Tom Bergan
Lynn Boger
Russ Cox
shaharko
Rob Pike
Josh Bleecher Snyder
Mohit Agarwal
Michael Munday
Martin Möhrmann
Paul Marks
Ian Lance Taylor
Hiroshi Ioka
Alex Brainman
Robert Griesemer
Brad Fitzpatrick
Alexander Döring
Joshua Boelter
Michael Fraenkel
Alan Donovan
Dan Caddigan
Quentin Smith
Adam Langley
Joe Tsai
Daniel Theophanes
David Chase
Klaus Post
Nigel Tao
Alberto Donizetti
Ilya Tocar
Edward Muller
David Crawshaw