The previous change sped up the pure computation form of LeadingZeros8.
This places it somewhat close to the table lookup form.
Depending on something that varies from toolchain to toolchain
(alignment, perhaps?), the slowdown from ditching the table lookup
is either 20% or 5%.
This benchmark is the best case scenario for the table lookup:
It is in the L1 cache already.
I think we're close enough that we can switch to the computational version,
and trust that the memory effects and binary size savings will be worth it.
Code:
func f8(x uint8) { z = bits.LeadingZeros8(x) }
Before:
"".f8 STEXT nosplit size=34 args=0x8 locals=0x0
0x0000 00000 (x.go:7) TEXT "".f8(SB), NOSPLIT, $0-8
0x0000 00000 (x.go:7) FUNCDATA $0, gclocals·2a5305abe05176240e61b8620e19a815(SB)
0x0000 00000 (x.go:7) FUNCDATA $1, gclocals·33cdeccccebe80329f1fdbee7f5874cb(SB)
0x0000 00000 (x.go:7) MOVBLZX "".x+8(SP), AX
0x0005 00005 (x.go:7) MOVBLZX AL, AX
0x0008 00008 (x.go:7) LEAQ math/bits.len8tab(SB), CX
0x000f 00015 (x.go:7) MOVBLZX (CX)(AX*1), AX
0x0013 00019 (x.go:7) ADDQ $-8, AX
0x0017 00023 (x.go:7) NEGQ AX
0x001a 00026 (x.go:7) MOVQ AX, "".z(SB)
0x0021 00033 (x.go:7) RET
After:
"".f8 STEXT nosplit size=30 args=0x8 locals=0x0
0x0000 00000 (x.go:7) TEXT "".f8(SB), NOSPLIT, $0-8
0x0000 00000 (x.go:7) FUNCDATA $0, gclocals·2a5305abe05176240e61b8620e19a815(SB)
0x0000 00000 (x.go:7) FUNCDATA $1, gclocals·33cdeccccebe80329f1fdbee7f5874cb(SB)
0x0000 00000 (x.go:7) MOVBLZX "".x+8(SP), AX
0x0005 00005 (x.go:7) MOVBLZX AL, AX
0x0008 00008 (x.go:7) LEAL 1(AX)(AX*1), AX
0x000c 00012 (x.go:7) BSRL AX, AX
0x000f 00015 (x.go:7) ADDQ $-8, AX
0x0013 00019 (x.go:7) NEGQ AX
0x0016 00022 (x.go:7) MOVQ AX, "".z(SB)
0x001d 00029 (x.go:7) RET
Change-Id: Icc7db50a7820fb9a3da8a816d6b6940d7f8e193e
Reviewed-on: https://go-review.googlesource.com/108942
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
We currently rewrite
(TESTQ (MOVQconst [c] x)) into (TESTQconst [c] x)
and (TESTQconst [-1] x) into (TESTQ x x)
if x is a (MOVQconst [-1]) we will be stuck in the endless rewrite loop.
Don't perform the rewrite in such cases.
Fixes#25006
Change-Id: I77f561ba2605fc104f1e5d5c57f32e9d67a2c000
Reviewed-on: https://go-review.googlesource.com/108879
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Rewrite x<<1+c into x+x+c, which can be expressed as a single LEAQ/LEAL.
Bit of a special case, but the single-instruction
LEA is both shorter and faster than SHL then ADD.
Triggers 293 times during make.bash.
Change-Id: I3f09c8e9a8f3859d1eeed336f095fc3ada79c2c1
Reviewed-on: https://go-review.googlesource.com/108938
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This triggers three times while building std,
once in image/png and twice in go/internal/gccgoimporter.
There are no instances in std in which a more aggressive
optimization would have triggered.
This doesn't necessarily avoid an allocation,
because escape analysis is already able in many cases
to use a temporary backing for the string,
but it does at a minimum avoid the runtime call and copy.
Fixes#24937
Change-Id: I7019e85638ba8cd7e2f03890e672558b858579bc
Reviewed-on: https://go-review.googlesource.com/108035
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Due to some recent optimizations related to the compare
instruction, DS-form load instructions started to be used
to load 8-byte go.strings. This can cause link time errors
if the go.string is not aligned to 4 bytes.
For DS-form instructions, the value in the offset field must
be a multiple of 4. If the offset is known at the time the
rules are processed, a DS-form load will not be chosen. But for
go.strings, the offset is not known at that time, but a
relocation is generated indicating that the linker should fill
in the DS relocation. When the linker tries to fill in the
relocation, if the offset is not aligned properly, a link error
will occur.
To fix this, when loading a go.string using MOVDload, the full
address of the go.string is generated and loaded into the base
register. Then the go.string is loaded with a 0 offset field.
Added a testcase that reproduces this problem.
Fixes#24799
Change-Id: I6a154e8e1cba64eae290be0fbcb608b75884ecdd
Reviewed-on: https://go-review.googlesource.com/107855
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
The escape analysis models the flow of "content" of X with a
level of "indirection" (OIND node) of X. This content can be
pointer dereference, or slice/string element. For the latter
case, the type of the OIND node should be the element type of
the slice/string. This CL fixes this. In particular, this
matters when the element type is pointerless, where the data
flow should not cause any escape.
Fixes#15730.
Change-Id: Iba9f92898681625e7e3ddef76ae65d7cd61c41e0
Reviewed-on: https://go-review.googlesource.com/107597
Reviewed-by: David Chase <drchase@google.com>
If both inputs are constant offsets from the same pointer then we
can evaluate NeqPtr and EqPtr at compile time. Triggers a few times
during all.bash. Removes a conditional branch in the following
code:
copy(x[1:], x[:])
This branch was recently added as an optimization in CL 94596. We
now skip the memmove if the pointers are equal. However, in the
above code we know at compile time that they are never equal.
Also, when the offset is variable, check if the offset is zero
rather than if the pointers are equal. For example:
copy(x[a:], x[:])
This would now skip the copy if a == 0, rather than if x + a == x.
Finally I've also added a rule to make IsNonNil true for pointers
to values on the stack. The nil check elimination pass will catch
these anyway, but eliminating them here might eliminate branches
earlier.
Change-Id: If72f436fef0a96ad0f4e296d3a1f8b6c3e712085
Reviewed-on: https://go-review.googlesource.com/106635
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
While writing CL 107315, I went back and forth for the syntax used for
constraints of build environments in which the architecture did not
support varitants ("plan9/amd64" vs "plan9/amd64/"). I eventually
settled for the latter because the code required less heuristics
(think parsing "plan9/386" vs "386/sse2") but there were a few
leftovers in code and comments.
Change-Id: I9d9a008f3814f9a1642609650eb571e7f1a675cf
Reviewed-on: https://go-review.googlesource.com/107338
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This CL makes the codegen testsuite automatically test all
architecture variants for architecture specified in tests. For
instance, if a test file specifies a "arm" test, it will be
automatically run on all GOARM variants (5,6,7), to increase
the coverage.
The CL also introduces a syntax to specify only a specific
variant (eg: "arm/7") in case the test makes sense only there.
The same syntax also allows to specify the operating system
in case it matters (eg: "plan9/386/sse2").
Fixes#24658
Change-Id: I2eba8b918f51bb6a77a8431a309f8b71af07ea22
Reviewed-on: https://go-review.googlesource.com/107315
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
And remove it from asmtest. Next CL will remove the whole
asmtest infrastructure.
Change-Id: I5851bf7c617456d62a3c6cffacf70252df7b056b
Reviewed-on: https://go-review.googlesource.com/107335
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The escape analysis models "loop depth". If the address of an
expression is assigned to something defined at a lower (outer)
loop depth, the escape analysis decides it escapes. However, it
uses the loop depth of the address operator instead of where
the RHS is defined. This causes an unnecessary escape if there is
an assignment inside a loop but the RHS is defined outside the
loop. This CL propagates the loop depth.
Fixes#24730.
Change-Id: I5ff1530688bdfd90561a7b39c8be9bfc009a9dae
Reviewed-on: https://go-review.googlesource.com/105257
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
I was wrong. There was a need to loop here.
Fixes#24761
Change-Id: If13b3ab72febde930bdaebdddd1c05e0d0446020
Reviewed-on: https://go-review.googlesource.com/105615
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
And delete them from asm_test.
Also delete an arm64 cmov test has been already ported to the new test
harness.
Change-Id: I4458721e1f512bc9ecbbe1c22a2c9c7109ad68fe
Reviewed-on: https://go-review.googlesource.com/106335
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
The check was previously disallowing package main from even importing
a non-function symbol named "main".
Fixes#24801.
Change-Id: I849b9713890429f0a16860ef16b5dc7e970d04a4
Reviewed-on: https://go-review.googlesource.com/106120
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
And delete them from asm_test.
Change-Id: I24f421b87e8cb4770c887a6dfd58eacd0088947d
Reviewed-on: https://go-review.googlesource.com/106056
Reviewed-by: Keith Randall <khr@golang.org>
And delete them from asm_test.
Change-Id: I9a75efe9858ef9d7ac86065f860c2ae3f25b0941
Reviewed-on: https://go-review.googlesource.com/105597
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Also, when statically building itabs, compare *types.Sym instead of
name alone so that method sets with duplicate non-exported methods are
handled correctly.
Fixes#24693.
Change-Id: I2db8a3d6e80991a71fef5586a15134b6de116269
Reviewed-on: https://go-review.googlesource.com/105039
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Previously, constant pointer-typed expressions could use either Mpint
or NilVal as their Val depending on their construction, but const.go
expects each type to have a single corresponding Val kind.
This CL changes pointer-typed expressions to exclusively use Mpint.
Fixes#21221.
Change-Id: I6ba36c9b11eb19a68306f0b296acb11a8c254c41
Reviewed-on: https://go-review.googlesource.com/105315
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Multi-byte comparison operations were used on amd64, arm64, i386
and s390x for comparisons with constant arrays, but only amd64 and
i386 for comparisons with string constants. This CL combines the
check for platform capability, since they have the same requirements,
and also enables both on ppc64le which also supports load merging.
Note that these optimizations currently use little endian byte order
which results in byte reversal instructions on s390x. This should
be fixed at some point.
Change-Id: Ie612d13359b50c77f4d7c6e73fea4a59fa11f322
Reviewed-on: https://go-review.googlesource.com/102558
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
And delete them from asm_test.
Change-Id: I0e33d58274951ab5acb67b0117b60ef617ea887a
Reviewed-on: https://go-review.googlesource.com/105735
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Method expressions with anonymous receiver types like "struct { T }.m"
require wrapper functions, which we weren't always creating. This in
turn resulted in linker errors.
This CL ensures that we generate wrapper functions for any anonymous
receiver types used in a method expression.
Fixes#22444.
Change-Id: Ia8ac27f238c2898965e57b82a91d959792d2ddd4
Reviewed-on: https://go-review.googlesource.com/105044
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
There were multiple ad hoc ways to create method symbols, with subtle
and confusing differences between them. This CL unifies them into a
single well-documented encoding and implementation.
This introduces some inconsequential changes to symbol format for the
sake of simplicity and consistency. Two notable changes:
1) Symbol construction is now insensitive to the package currently
being compiled. Previously, non-exported methods on anonymous types
received different method symbols depending on whether the method was
local or imported.
2) Symbols for method values parenthesized non-pointer receiver types
and non-exported method names, and also always package-qualified
non-exported method names. Now they use the same rules as normal
method symbols.
The methodSym function is also now stricter about rejecting
non-sensical method/receiver combinations. Notably, this means that
typecheckfunc needs to call addmethod to validate the method before
calling declare, which also means we no longer emit errors about
redeclaring bogus methods.
Change-Id: I9501c7a53dd70ef60e5c74603974e5ecc06e2003
Reviewed-on: https://go-review.googlesource.com/104876
Reviewed-by: Robert Griesemer <gri@golang.org>
Since it's been reliably failing on one of the linux-arm builders
(arm5spacemonkey) for a long time.
Updates #24221.
Change-Id: I8fccc7e16631de497ccc2c285e510a110a93ad95
Reviewed-on: https://go-review.googlesource.com/104535
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
And delete them from asm_test.
Change-Id: Id533130470da9176a401cb94972f626f43a62148
Reviewed-on: https://go-review.googlesource.com/103656
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
The logic in addBranchRestrictions didn't allow to correctly
model OpIs(Slice)Bound for signed domain, and it was also partly
implemented within addRestrictions.
Thanks to the previous changes, it is now possible to handle
the negative conditions correctly, so that we can learn
both signed/LT + unsigned/LT on the positive side, and
signed/GE + unsigned/GE on the negative side (but only if
the index can be proved to be non-negative).
This is able to prove ~50 more slice accesses in std+cmd.
Change-Id: I9858080dc03b16f85993a55983dbc4b00f8491b0
Reviewed-on: https://go-review.googlesource.com/104037
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Don't report errors if we don't have a correct type switch
guard; instead ignore it and leave it to the type-checker
to report the error. This leads to better error messages
concentrating on the type switch guard rather than errors
around (confusing) syntactic details.
Also clean up some code setting up AssertExpr (they never
have a nil Type field) and remove some incorrect TODOs.
Fixes#24470.
Change-Id: I69512f36e0417e3b5ea9c8856768e04b19d654a8
Reviewed-on: https://go-review.googlesource.com/103615
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
When test/run script was removed, these two tests
were changed to be executed by test/run.go.
Because errchk does not exit with non-zero status on
errors, they were silently failing for a while.
This change makes 2 things:
1. Compile tested packages in GOROOT/test to match older runner script
behavior (strictly required only in bug345, optional in bug248)
2. Check command output with "(?m)^BUG" regexp.
It approximates older `grep -q '^BUG' that was used before.
See referenced issue for detailed explanation.
Fixes#24629
Change-Id: Ie888dcdb4e25cdbb19d434bbc5cb03eb633e9ee8
Reviewed-on: https://go-review.googlesource.com/104095
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CL 38338 introduced SSA rules to optimize two types of pointer equality
tests: a pointer compared with itself, and comparison of addresses taken
of two symbols which may have the same base. This patch adds rules to
apply the same optimization to pointer inequality tests, which also ensures
that two pointers to zero-width types cannot be both equal and unequal
at the same time.
Fixes#24503.
Change-Id: Ic828aeb86ae2e680caf66c35f4c247674768a9ba
Reviewed-on: https://go-review.googlesource.com/102275
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
And delete them from asm_test.
Change-Id: Idfe1249052d82d15b9c30b292c78656a0bf7b48d
Reviewed-on: https://go-review.googlesource.com/103315
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This change modifies the codegen test harness driver so that it no
longer modifies the environment GOOS/GOARCH, since that seems to cause
flakiness in other concurrently-running tests.
The change also enables the codegen tests in run.go.
Fixes#24538
Change-Id: I997ac1eb38eb92054efff67fe5c4d3cccc86412b
Reviewed-on: https://go-review.googlesource.com/103455
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The escape_because.go test file (which tests the "because" escape
explainations printed by `-m -m`) cointains a machine-generated list
of all the escape reasons seen in the escape tests.
The list appears to be outdated; moreove a new escape reason was added
in CL 102895. This change re-generates the list.
Change-Id: Idc721c6bbfe9516895b5cf1e6d09b77deda5a3dd
Reviewed-on: https://go-review.googlesource.com/103375
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change makes `-m -m` print a better explanation for the case
where a slice is marked as escaping and heap-allocated because it
has a non-constant len/cap.
Fixes#24578
Change-Id: I0ebafb77c758a99857d72b365817bdba7b446cc0
Reviewed-on: https://go-review.googlesource.com/102895
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
In expandmeth, we call expand1/expand0 to build a list of all
candidate methods to promote, and then we use dotpath to prune down
which names actually resolve to a promoted method and how.
However, previously we still computed "followsptr" based on the
expand1/expand0 traversal (which is depth-first), rather than
dotpath (which is breadth-first). The result is that we could
sometimes end up miscomputing whether a particular promoted method
involves a pointer traversal, which could result in bad code
generation for method trampolines.
Fixes#24547.
Change-Id: I57dc014466d81c165b05d78b98610dc3765b7a90
Reviewed-on: https://go-review.googlesource.com/102618
Reviewed-by: Robert Griesemer <gri@golang.org>
And delete them from asm_test.
Change-Id: I34fcf85ae8ce09cd146fe4ce6a0ae7616bd97e2d
Reviewed-on: https://go-review.googlesource.com/102296
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
And remove them from asm_test.
Change-Id: I1ca29b40546d6de06f20bfd550ed8ff87f495454
Reviewed-on: https://go-review.googlesource.com/102115
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
And delete them from asm_test.
Change-Id: I64c512bfef3b3da6db5c5d29277675dade28b8ab
Reviewed-on: https://go-review.googlesource.com/101595
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
The atomic add instructions modify the condition code and so need to
be marked as clobbering flags.
Fixes#24449.
Change-Id: Ic69c8d775fbdbfb2a56c5e0cfca7a49c0d7f6897
Reviewed-on: https://go-review.googlesource.com/101455
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
And delete them from asm_test.
Change-Id: I3cf0934706a640136cb0f646509174f8c1bf3363
Reviewed-on: https://go-review.googlesource.com/101395
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
And delete them from asm_test.
Change-Id: Ibdaca3496eefc73c731b511ddb9636a1f3dff68c
Reviewed-on: https://go-review.googlesource.com/100915
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
And delete them from asm_test.
Change-Id: I29c8d098a8893e6b669b6272a2f508985ac9d618
Reviewed-on: https://go-review.googlesource.com/100876
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This reverts commit 080187f4f7.
It broke build of golang.org/x/exp/shiny/iconvg
See issue 24395 for details
Change-Id: Ifd6134f6214e6cee40bd3c63c32941d5fc96ae8b
Reviewed-on: https://go-review.googlesource.com/100755
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This change ports all the remaining tests checking that small memmoves
are replaced with MOVs to the new codegen test harness, and deletes
them from the asm_test file.
Change-Id: I01c94b441e27a5d61518035af62d62779dafeb56
Reviewed-on: https://go-review.googlesource.com/100476
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Add tests for the "negative size argument in make.*" and "size argument
too large in make.*" error messages to appear at call sites in case the
size is a const defined on another line.
As suggested by Matthew in a comment on CL 69910.
Change-Id: I5c33d4bec4e3d20bb21fe8019df27999997ddff3
Reviewed-on: https://go-review.googlesource.com/100395
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
As a side effect of working on mid-stack inlining, we've fixed support
for inlining variadic functions. Might as well enable it.
Change-Id: I7f555f8b941969791db7eb598c0b49f6dc0820aa
Reviewed-on: https://go-review.googlesource.com/100456
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Currently, order desugars map assignment operations like
m[k] op= r
into
m[k] = m[k] op r
which in turn is transformed during walk into:
tmp := *mapaccess(m, k)
tmp = tmp op r
*mapassign(m, k) = tmp
However, this is suboptimal, as we could instead produce just:
*mapassign(m, k) op= r
One complication though is if "r == 0", then "m[k] /= r" and "m[k] %=
r" will panic, and they need to do so *before* calling mapassign,
otherwise we may insert a new zero-value element into the map.
It would be spec compliant to just emit the "r != 0" check before
calling mapassign (see #23735), but currently these checks aren't
generated until SSA construction. For now, it's simpler to continue
desugaring /= and %= into two map indexing operations.
Fixes#23661.
Change-Id: I46e3739d9adef10e92b46fdd78b88d5aabe68952
Reviewed-on: https://go-review.googlesource.com/91557
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
cmd/asm now supports three-operand form of IMUL,
so instead of using IMUL with resultInArg0, emit IMUL3 instruction.
This results in less redundant MOVs where SSA assigns
different registers to input[0] and dst arguments.
Note: these have exactly the same encoding when reg0=reg1:
IMUL3x $const, reg0, reg1
IMULx $const, reg
Two-operand IMULx is like a crippled IMUL3x, with dst fixed to input[0].
This is why we don't bother to generate IMULx for the case where
dst is the same as input[0].
Change-Id: I4becda475b3dffdd07b6fdf1c75bacc82af654e4
Reviewed-on: https://go-review.googlesource.com/99656
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Reviewed-by: Keith Randall <khr@golang.org>
Remove old tests from asm_test.
Change-Id: Ib408ec7faa60068bddecf709b93ce308e0ef665a
Reviewed-on: https://go-review.googlesource.com/100075
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
This change adds a README file inside the test/codegen directory,
explaining how to run the codegen tests and the syntax of the regexps
comments used to match assembly instructions.
Change-Id: Ica4eb3ffa9c6975371538cc8ae0ac3c1a3a03baf
Reviewed-on: https://go-review.googlesource.com/99156
Reviewed-by: Keith Randall <khr@golang.org>
And delete them from asm_go.
Change-Id: I0057cbd90ca55fa51c596e32406e190f3866f93e
Reviewed-on: https://go-review.googlesource.com/99815
Reviewed-by: Keith Randall <khr@golang.org>
Only RotateLeft{64,32} were tested, and just for ppc64. This CL adds
tests for RotateLeft{64,32,16,8} on arm64 and amd64/386, for the cases
where the calls are actually instrinsified.
RotateLeft tests (the last ones for math/bits functions) are deleted
from asm_test.
This CL also adds a space between the "//" and the arch name in the
comments, to uniform this file to the style used in all the other
files.
Change-Id: Ifc2a27261d70bcc294b4ec64490d8367f62d2b89
Reviewed-on: https://go-review.googlesource.com/99596
Reviewed-by: Giovanni Bajo <rasky@develer.com>
This adds four new deductions to the prove pass, all related to adding
or subtracting one from a value. This is the first hint of actual
arithmetic relations in the prove pass.
The most effective of these is
x-1 >= w && x > min ⇒ x > w
This helps eliminate bounds checks in code like
if x > 0 {
// do something with s[x-1]
}
Altogether, these deductions prove an additional 260 branches in std
and cmd. Furthermore, they will let us eliminate some tricky
compiler-inserted panics in the runtime that are interfering with
static analysis.
Fixes#23354.
Change-Id: I7088223e0e0cd6ff062a75c127eb4bb60e6dce02
Reviewed-on: https://go-review.googlesource.com/87480
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Alexandru Moșoi <alexandru@mosoi.ro>
This adds a few simple deductions to the prove pass' fact table to
derive unsigned concrete limits from signed concrete limits where
possible.
This tweak lets the pass prove 70 additional branch conditions in std
and cmd.
This is based on a comment from the recently-deleted factsTable.get:
"// TODO: also use signed data if lim.min >= 0".
Change-Id: Ib4340249e7733070f004a0aa31254adf5df8a392
Reviewed-on: https://go-review.googlesource.com/87479
Reviewed-by: Alexandru Moșoi <alexandru@mosoi.ro>
Reviewed-by: Keith Randall <khr@golang.org>
Currently the prove pass uses implication queries. For each block, it
collects the set of branch conditions leading to that block, and
queries this fact table for whether any of these facts imply the
block's own branch condition (or its inverse). This works remarkably
well considering it doesn't do any deduction on these facts, but it
has various downsides:
1. It requires an implementation both of adding facts to the table and
determining implications. These are very nearly duals of each
other, but require separate implementations. Likewise, the process
of asserting facts of dominating branch conditions is very nearly
the dual of the process of querying implied branch conditions.
2. It leads to less effective use of derived facts. For example, the
prove pass currently derives facts about the relations between len
and cap, but can't make use of these unless a branch condition is
in the exact form of a derived fact. If one of these derived facts
contradicts another fact, it won't notice or make use of this.
This CL changes the approach of the prove pass to instead use
*contradiction* instead of implication. Rather than ever querying a
branch condition, it simply adds branch conditions to the fact table.
If this leads to a contradiction (specifically, it makes the fact set
unsatisfiable), that branch is impossible and can be cut. As a result,
1. We can eliminate the code for determining implications
(factsTable.get disappears entirely). Also, there is now a single
implementation of visiting and asserting branch conditions, since
we don't have to flip them around to treat them as facts in one
place and queries in another.
2. Derived facts can be used effectively. It doesn't matter *why* the
fact table is unsatisfiable; a contradiction in any of the facts is
enough.
3. As an added benefit, it's now quite easy to avoid traversing beyond
provably-unreachable blocks. In contrast, the current
implementation always visits all blocks.
The prove pass already has nearly all of the mechanism necessary to
compute unsatisfiability, which means this both simplifies the code
and makes it more powerful.
The only complication is that the current implication procedure has a
hack for dealing with the 0 <= Args[0] condition of OpIsInBounds and
OpIsSliceInBounds. We replace this with asserting the appropriate fact
when we process one of these conditions. This seems much cleaner
anyway, and works because we can now take advantage of derived facts.
This has no measurable effect on compiler performance.
Effectiveness:
There is exactly one condition in all of std and cmd that this fails
to prove that the old implementation could: (int64(^uint(0)>>1) < x)
in encoding/gob. This can never be true because x is an int, and it's
basically coincidence that the old code gets this. (For example, it
fails to prove the similar (x < ^int64(^uint(0)>>1)) condition that
immediately precedes it, and even though the conditions are logically
unrelated, it wouldn't get the second one if it hadn't first processed
the first!)
It does, however, prove a few dozen additional branches. These come
from facts that are added to the fact table about the relations
between len and cap. These were almost never queried directly before,
but could lead to contradictions, which the unsat-based approach is
able to use.
There are exactly two branches in std and cmd that this implementation
proves in the *other* direction. This sounds scary, but is okay
because both occur in already-unreachable blocks, so it doesn't matter
what we chose. Because the fact table logic is sound but incomplete,
it fails to prove that the block isn't reachable, even though it is
able to prove that both outgoing branches are impossible. We could
turn these blocks into BlockExit blocks, but it doesn't seem worth the
trouble of the extra proof effort for something that happens twice in
all of std and cmd.
Tests:
This CL updates test/prove.go to change the expected messages because
it can no longer give a "reason" why it proved or disproved a
condition. It also adds a new test of a branch it couldn't prove
before.
It mostly guts test/sliceopt.go, removing everything related to slice
bounds optimizations and moving a few relevant tests to test/prove.go.
Much of this test is actually unreachable. The new prove pass figures
this out and doesn't try to prove anything about the unreachable
parts. The output on the unreachable parts is already suspect because
anything can be proved at that point, so it's really just a regression
test for an algorithm the compiler no longer uses.
This is a step toward fixing #23354. That issue is quite easy to fix
once we can use derived facts effectively.
Change-Id: Ia48a1b9ee081310579fe474e4a61857424ff8ce8
Reviewed-on: https://go-review.googlesource.com/87478
Reviewed-by: Keith Randall <khr@golang.org>
And delete them from the asm_test.go file.
Change-Id: I124c8c352299646ec7db0968cdb0fe59a3b5d83d
Reviewed-on: https://go-review.googlesource.com/99475
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
This was already done for normal parameters, and the same logic
applies for receiver parameters too.
Updates #24305.
Change-Id: Ia2a46f68d14e8fb62004ff0da1db0f065a95a1b7
Reviewed-on: https://go-review.googlesource.com/99335
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This recently added arm64 memmove codegen check:
func movesmall() {
// arm64:-"memmove"
x := [...]byte{1, 2, 3, 4, 5, 6, 7}
copy(x[1:], x[:])
}
is not correct, for two reasons:
1. regexps are matched from the start of the disasm line (excluding
line information). This mean that a negative -"memmove" check will
pass against a 'CALL runtime.memmove' line because the line does
not start with 'memmove' (its starts with CALL...).
The way to specify no 'memmove' match whatsoever on the line is
-".*memmove"
2. AFAIK comments on their own line are matched against the first
subsequent non-comment line. So the code above only verifies that
the x := ... line does not generate a memmove. The comment should
be moved near the copy() line, if it's that one we want to not
generate a memmove call.
The fact that the test above is not effective can be checked by
running `go run run.go -v codegen` in the toplevel test directory with
a go1.10 toolchain (that does not have the memmove-elision
optimization). The test will still pass (it shouldn't).
This change changes the regexp to -".*memmove" and moves it near the
line it needs to (not)match.
Change-Id: Ie01ef4d775e77d92dc8d8b7856b89b200f5e5ef2
Reviewed-on: https://go-review.googlesource.com/98977
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
And remove them from ssa_test.
Change-Id: If767af662801219774d1bdb787c77edfa6067770
Reviewed-on: https://go-review.googlesource.com/98976
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Current implementation doesn't consider MOVDreg type operand and fail to combine
it into larger store. This patch fixes the issue.
Fixes#24242
Change-Id: I7d68697f80e76f48c3528ece01a602bf513248ec
Reviewed-on: https://go-review.googlesource.com/98397
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
And remove them from ssa_test.
Change-Id: I3efac5fea529bb0efa2dae32124530482ba5058e
Reviewed-on: https://go-review.googlesource.com/98815
Reviewed-by: Keith Randall <khr@golang.org>
And remove them from ssa_test.
Change-Id: Ib5de5c0d908f23915e0847eca338cacf2fa5325b
Reviewed-on: https://go-review.googlesource.com/98795
Reviewed-by: Giovanni Bajo <rasky@develer.com>
This change move bits.Len* intrinsification tests to the new codegen
test harness, removing them from the old ssa_test file. Five different
test functions (one for each bit.Len function tested) was used, to
avoid possible unwanted interactions between multiple calls inside one
function.
Change-Id: Iffd5be55b58e88597fa30a562a28dacb01236d8b
Reviewed-on: https://go-review.googlesource.com/98156
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
This CL moves the load/store combining tests into asmcheck.
In addition at being more compact, it's also now easier to
spot what it is missing in each architecture.
While doing so, I think I uncovered a bug in ppc64le and arm64
rules, because they fail to load/store combine in non-trivial
functions. Not sure why, I'll open an issue.
Change-Id: Ia1572d53c0553d9104f3e52b95e4d1768a8440a3
Reviewed-on: https://go-review.googlesource.com/98441
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Before this change, in case of any failure, asmcheck was
dumping to stderr the whole output of compile -S, which
can be very long if it contains multiple functions.
Make it so it filters the output to only display the
assembly output of functions for which at least one opcode
check failed. This greatly simplifies debugging.
Change-Id: I1bbf54473b8252a3384e2c1dade82d926afc119d
Reviewed-on: https://go-review.googlesource.com/98444
Run-TryBot: Giovanni Bajo <rasky@develer.com>
Reviewed-by: Keith Randall <khr@golang.org>
Currently, the top-level testsuite always uses whatever version
of Go is found in the PATH to execute all the tests. This
forces the developers to tweak the PATH to run the testsuite.
Change it to use the same version of Go used to run run.go.
This allows developers to run the testsuite using the tip
compiler by simply saying "../bin/go run run.go".
I think this is a better solution compared to always forcing
"../bin/go", because it allows developers to run the testsuite
using different Go versions, for instance to check if a new
test is fixed in tip compared to the installed compiler.
Fixes#24217
Change-Id: I41b299c753b6e77c41e28be9091b2b630efea9d2
Reviewed-on: https://go-review.googlesource.com/98439
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
In RET instruction, the operand is the return jump's target,
which should be put in Prog.To.
Add an action "buildrundir" to the test driver, which builds
(compile+assemble+link) the code in a directory and runs the
resulting binary.
Fixes#23838.
Change-Id: I7ebe7eda49024b40a69a24857322c5ca9c67babb
Reviewed-on: https://go-review.googlesource.com/94175
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This avoid simple bugs like "ADD" matching "FADD". Obviously
"ADD" will still match "ADDQ" so some care is still required
in this regard, but at least a first class of possible errors
is taken care of.
Change-Id: I7deb04c31de30bedac9c026d9889ace4a1d2adcb
Reviewed-on: https://go-review.googlesource.com/97817
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Reviewed-by: Keith Randall <khr@golang.org>
asmcheck comments now support a compact form of specifying
multiple checks for each platform, using the following syntax:
amd64:"SHL\t[$]4","SHR\t[$]4"
Negative checks are also parsed using the following syntax:
amd64:-"ROR"
though they are still not working.
Moreover, out-of-line comments have been implemented. This
allows to specify asmchecks on comment-only lines, that will
be matched on the first subsequent non-comment non-empty line.
// amd64:"XOR"
// arm:"EOR"
x ^= 1
Change-Id: I110c7462fc6a5c70fd4af0d42f516016ae7f2760
Reviewed-on: https://go-review.googlesource.com/97816
Reviewed-by: Keith Randall <khr@golang.org>
When the slice/string length is very large,
probably artifically large as in CL 97523,
adding BX (length) to R11 (pointer) overflows.
As a result, checking DI < R11 yields the wrong result.
Since they will be equal when the loop is done,
just check DI != R11 instead.
Yes, the pointer itself could overflow, but if that happens,
something else has gone pretty wrong; not our concern here.
Fixes#24187
Change-Id: I2f60fc6ccae739345d01bc80528560726ad4f8c6
Reviewed-on: https://go-review.googlesource.com/97802
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The top-level test harness is modified to support a new kind
of test: "asmcheck". This is meant to replace asm_test.go
as an easier and more readable way to test code generation.
I've added a couple of codegen tests to get initial feedback
on the syntax. I've created them under a common "codegen"
subdirectory, so that it's easier to run them all with
"go run run.go -v codegen".
The asmcheck syntax allows to insert line comments that
can specify a regular expression to match in the assembly code,
for multiple architectures (the testsuite will automatically
build each testfile multiple times, one per mentioned architecture).
Negative matches are unsupported for now, so this cannot fully
replace asm_test yet.
Change-Id: Ifdbba389f01d55e63e73c99e5f5449e642101d55
Reviewed-on: https://go-review.googlesource.com/97355
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
OCOMPLIT stores the pre-typechecked type in n.Right, and then moves it
to n.Type. However, it wasn't clearing n.Right, so n.Right continued
to point to the OTYPE node. (Exception: slice literals reused n.Right
to store the array length.)
When exporting inline function bodies, we don't expect to need to save
any type aliases. Doing so wouldn't be wrong per se, but it's
completely unnecessary and would just bloat the export data.
However, reexportdep (whose role is to identify types needed by inline
function bodies) uses a generic tree traversal mechanism, which visits
n.Right even for O{ARRAY,MAP,STRUCT}LIT nodes. This means it finds the
OTYPE node, and mistakenly interpreted that the type alias needs to be
exported.
The straight forward fix is to just clear n.Right when typechecking
composite literals.
Fixes#24173.
Change-Id: Ia2d556bfdd806c83695b08e18b6cd71eff0772fc
Reviewed-on: https://go-review.googlesource.com/97719
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Otherwise, the error can be confusing if one forgets or doesn't know
that the builtin is being shadowed, which is not common practice.
Fixes#22822.
Change-Id: I735393b5ce28cb83815a1c3f7cd2e7bb5080a32d
Reviewed-on: https://go-review.googlesource.com/97455
Reviewed-by: Robert Griesemer <gri@golang.org>
This change enables printing of relative column information if a
prior line directive specified a valid column. If there was no
line directive, or the line directive didn't specify a column
(or the -C flag is specified), no column information is shown in
file positions.
Implementation: Column values (and line values, for that matter)
that are zero are interpreted as "unknown". A line directive that
doesn't specify a column records that as a zero column in the
respective PosBase data structure. When computing relative columns,
a relative value is zero of the base's column value is zero.
When formatting a position, a zero column value is not printed.
To make this work without special cases, the PosBase for a file
is given a concrete (non-0:0) position 1:1 with the PosBase's
line and column also being 1:1. In other words, at the position
1:1 of a file, it's relative positions are starting with 1:1 as
one would expect.
In the package syntax, this requires self-recursive PosBases for
file bases, matching what cmd/internal/src.PosBase was already
doing. In src.PosBase, file and inlining bases also need to be
based at 1:1 to indicate "known" positions.
This change completes the cmd/compiler part of the issue below.
Fixes#22662.
Change-Id: I6c3d2dee26709581fba0d0261b1d12e93f1cba1a
Reviewed-on: https://go-review.googlesource.com/97375
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The first word of an interface is a pointer, but for the purposes
of GC we don't need to treat it as such.
1. If it is a non-empty interface, the pointer points to an itab
which is always in persistentalloc space.
2. If it is an empty interface, the pointer points to a _type.
a. If it is a compile-time-allocated type, it points into
the read-only data section.
b. If it is a reflect-allocated type, it points into the Go heap.
Reflect is responsible for keeping a reference to
the underlying type so it won't be GCd.
If we ever have a moving GC, we need to change this for 2b (as
well as scan itabs to update their itab._type fields).
Write barriers on the first word of interfaces have already been removed.
Change-Id: I643e91d7ac4de980ac2717436eff94097c65d959
Reviewed-on: https://go-review.googlesource.com/97518
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
We accidentally overlooked needing to still visit Ninit for OIF
statements with constant conditions in golang.org/cl/96778.
Fixes#24120.
Change-Id: I5b341913065ff90e1163fb872b9e8d47e2a789d2
Reviewed-on: https://go-review.googlesource.com/97475
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Extend cmd/internal/src.PosBase to track column information,
and adjust the meaning of the PosBase position to mean the
position at which the PosBase's relative (line, col) position
starts (rather than indicating the position of the //line
directive). Because this semantic change is made in the
compiler's noder, it doesn't affect the logic of src.PosBase,
only its test setup (where PosBases are constructed with
corrected incomming positions). In short, src.PosBase now
matches syntax.PosBase with respect to the semantics of
src.PosBase.pos.
For #22662.
Change-Id: I5b1451cb88fff3f149920c2eec08b6167955ce27
Reviewed-on: https://go-review.googlesource.com/96535
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
When we go from a branch block to a plain block, reset the
branch prediction bit. Downstream passes asssume that if the
branch prediction is set, then the block has 2 successors.
Fixes#23504
Change-Id: I2898ec002228b2e34fe80ce420c6939201c0a5aa
Reviewed-on: https://go-review.googlesource.com/88955
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This replaces the contiguous heap arena mapping with a potentially
sparse mapping that can support heap mappings anywhere in the address
space.
This has several advantages over the current approach:
* There is no longer any limit on the size of the Go heap. (Currently
it's limited to 512GB.) Hence, this fixes#10460.
* It eliminates many failures modes of heap initialization and
growing. In particular it eliminates any possibility of panicking
with an address space conflict. This can happen for many reasons and
even causes a low but steady rate of TSAN test failures because of
conflicts with the TSAN runtime. See #16936 and #11993.
* It eliminates the notion of "non-reserved" heap, which was added
because creating huge address space reservations (particularly on
64-bit) led to huge process VSIZE. This was at best confusing and at
worst conflicted badly with ulimit -v. However, the non-reserved
heap logic is complicated, can race with other mappings in non-pure
Go binaries (e.g., #18976), and requires that the entire heap be
either reserved or non-reserved. We currently maintain the latter
property, but it's quite difficult to convince yourself of that, and
hence difficult to keep correct. This logic is still present, but
will be removed in the next CL.
* It fixes problems on 32-bit where skipping over parts of the address
space leads to mapping huge (and never-to-be-used) metadata
structures. See #19831.
This also completely rewrites and significantly simplifies
mheap.sysAlloc, which has been a source of many bugs. E.g., #21044,
#20259, #18651, and #13143 (and maybe #23222).
This change also makes it possible to allocate individual objects
larger than 512GB. As a result, a few tests that expected huge
allocations to fail needed to be changed to make even larger
allocations. However, at the moment attempting to allocate a humongous
object may cause the program to freeze for several minutes on Linux as
we fall back to probing every page with addrspace_free. That logic
(and this failure mode) will be removed in the next CL.
Fixes#10460.
Fixes#22204 (since it rewrites the code involved).
This slightly slows down compilebench and the x/benchmarks garbage
benchmark.
name old time/op new time/op delta
Template 184ms ± 1% 185ms ± 1% ~ (p=0.065 n=10+9)
Unicode 86.9ms ± 3% 86.3ms ± 1% ~ (p=0.631 n=10+10)
GoTypes 599ms ± 0% 602ms ± 0% +0.56% (p=0.000 n=10+9)
Compiler 2.87s ± 1% 2.89s ± 1% +0.51% (p=0.002 n=9+10)
SSA 7.29s ± 1% 7.25s ± 1% ~ (p=0.182 n=10+9)
Flate 118ms ± 2% 118ms ± 1% ~ (p=0.113 n=9+9)
GoParser 147ms ± 1% 148ms ± 1% +1.07% (p=0.003 n=9+10)
Reflect 401ms ± 1% 404ms ± 1% +0.71% (p=0.003 n=10+9)
Tar 175ms ± 1% 175ms ± 1% ~ (p=0.604 n=9+10)
XML 209ms ± 1% 210ms ± 1% ~ (p=0.052 n=10+10)
(https://perf.golang.org/search?q=upload:20171231.4)
name old time/op new time/op delta
Garbage/benchmem-MB=64-12 2.23ms ± 1% 2.25ms ± 1% +0.84% (p=0.000 n=19+19)
(https://perf.golang.org/search?q=upload:20171231.3)
Relative to the start of the sparse heap changes (starting at and
including "runtime: fix various contiguous bitmap assumptions"),
overall slowdown is roughly 1% on GC-intensive benchmarks:
name old time/op new time/op delta
Template 183ms ± 1% 185ms ± 1% +1.32% (p=0.000 n=9+9)
Unicode 84.9ms ± 2% 86.3ms ± 1% +1.65% (p=0.000 n=9+10)
GoTypes 595ms ± 1% 602ms ± 0% +1.19% (p=0.000 n=9+9)
Compiler 2.86s ± 0% 2.89s ± 1% +0.91% (p=0.000 n=9+10)
SSA 7.19s ± 0% 7.25s ± 1% +0.75% (p=0.000 n=8+9)
Flate 117ms ± 1% 118ms ± 1% +1.10% (p=0.000 n=10+9)
GoParser 146ms ± 2% 148ms ± 1% +1.48% (p=0.002 n=10+10)
Reflect 398ms ± 1% 404ms ± 1% +1.51% (p=0.000 n=10+9)
Tar 173ms ± 1% 175ms ± 1% +1.17% (p=0.000 n=10+10)
XML 208ms ± 1% 210ms ± 1% +0.62% (p=0.011 n=10+10)
[Geo mean] 369ms 373ms +1.17%
(https://perf.golang.org/search?q=upload:20180101.2)
name old time/op new time/op delta
Garbage/benchmem-MB=64-12 2.22ms ± 1% 2.25ms ± 1% +1.51% (p=0.000 n=20+19)
(https://perf.golang.org/search?q=upload:20180101.3)
Change-Id: I5daf4cfec24b252e5a57001f0a6c03f22479d0f0
Reviewed-on: https://go-review.googlesource.com/85887
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
The scanner assumed that ~ really meant ^, which may be helpful when
coming from C. But ~ is not a valid Go token, and pretending that it
should be ^ can lead to confusing error messages. Better to be upfront
about it and complain about the invalid character in the first place.
This was code "inherited" from the original yacc parser which was
derived from a C compiler. It's 10 years later and we can probably
assume that people are less confused about C and Go.
Fixes#23587.
Change-Id: I8d8f9b55b0dff009b75c1530d729bf9092c5aea6
Reviewed-on: https://go-review.googlesource.com/94160
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Assume that an expression that is not a function call in a defer/go
statement is indeed a function that is just missing its invocation.
Report the error but continue with a sane syntax tree.
Fixes#23586.
Change-Id: Ib45ebac57c83b3e39ae4a1b137ffa291dec5b50d
Reviewed-on: https://go-review.googlesource.com/94156
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Previously, if we typechecked a statement like
var x bool = p1.f == p2.f && p1.g == p2.g
we would correctly update the '&&' node's type from 'untyped bool' to
'bool', but the '==' nodes would stay 'untyped bool'. This is
inconsistent, and caused consistency checks during walk to fail.
This CL doesn't pass toolstash because it seems to slightly affect the
register allocator's heuristics. (Presumably 'untyped bool's were
previously making it all the way through SSA?)
Fixes#23414.
Change-Id: Ia85f8cfc69b5ba35dfeb157f4edf57612ecc3285
Reviewed-on: https://go-review.googlesource.com/94022
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The tag was overwritten by the code for special handling unnamed
parameters.
Fixes#23045.
Change-Id: Ie2e1db3e902a07a2bbbc2a3424cea300f0a42cc3
Reviewed-on: https://go-review.googlesource.com/82775
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Per the language spec clarification in https://golang.org/cl/14727.
Updates #12576
Updates #12621
Change-Id: I1e459c3c11a571bd29582761faacaa9ca3178ba6
Reviewed-on: https://go-review.googlesource.com/91895
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The sub-word shifts need to sign-extend before shifting, to avoid
bringing in data from higher in the argument.
Fixes#23812
Change-Id: I0a95a0b49c48f3b40b85765bb4a9bb492be0cd73
Reviewed-on: https://go-review.googlesource.com/93716
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Fixes#23732
Disambiguate "too few" or "too many" values in struct
initializer messages by reporting the name of the literal.
After:
issue23732.go:27:3: too few values in Foo literal
issue23732.go:34:12: too many values in Bar literal
issue23732.go:40:6: too few values in Foo literal
issue23732.go:40:12: too many values in Bar literal
Change-Id: Ieca37298441d907ac78ffe960c5ab55741a362ef
Reviewed-on: https://go-review.googlesource.com/93277
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Now that the buffered write barrier is implemented for all
architectures, we can remove the old eager write barrier
implementation. This CL removes the implementation from the runtime,
support in the compiler for calling it, and updates some compiler
tests that relied on the old eager barrier support. It also makes sure
that all of the useful comments from the old write barrier
implementation still have a place to live.
Fixes#22460.
Updates #21640 since this fixes the layering concerns of the write
barrier (but not the other things in that issue).
Change-Id: I580f93c152e89607e0a72fe43370237ba97bae74
Reviewed-on: https://go-review.googlesource.com/92705
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Rick Hudson <rlh@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When loading multiple elements of an array into a single register,
make sure we treat them as unsigned. When treated as signed, the
upper bits might all be set, causing the shift-or combo to clobber
the values higher in the register.
Fixes#23719.
Change-Id: Ic87da03e9bd0fe2c60bb214b99f846e4e9446052
Reviewed-on: https://go-review.googlesource.com/92335
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
The fix is CL 91035.
Build only with gccgo at the moment, as it hits issue #23546.
Updates #23545.
Change-Id: I3a1367bb31b04773d31f71016f8fd7bd1855d7b5
Reviewed-on: https://go-review.googlesource.com/89735
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The compiler allows code to have multiple differently-typed views of a
single argument. For instance, if we have
func f(x float64) {
y := *(*int64)(unsafe.Pointer(&x))
...
}
Then in SSA we get two OpArg ops, one with float64 type and one with
int64 type.
The compiler will try to reuse argument slots for spill slots. It
checks that the argument slot is dead by consulting an interference
graph.
When building the interference graph, we normally ignore cross-type
edges because the values on either end of that edge can't be allocated
to the same slot. (This is just a space-saving optimization.) This
rule breaks down when one of the values is an argument, because of the
multiple views described above. If we're spilling a float64, it is not
enough that the float64 version of x is dead; the int64 version of x
has to be dead also.
Remove the optimization of not recording interference edges if types
don't match. That optimization is incorrect if one of the values
connected by the edge is an argument.
Fixes#23522
Change-Id: I361f85d80fe3bc7249014ca2c3ec887c3dc30271
Reviewed-on: https://go-review.googlesource.com/89335
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
A Select Op could produce a value with upper 32 bits NOT zeroed,
for example, Div32 is lowered to (Select0 (DIVL x y)).
In theory, we could look into the argument of a Select to decide
whether the upper bits are zeroed. As it is late in release cycle,
just disable this optimization for Select for now.
Fixes#23305.
Change-Id: Icf665a2af9ccb0a7ba0ae00c683c9e349638bf85
Reviewed-on: https://go-review.googlesource.com/85736
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
My previous fix for issue 23179 was incomplete; it turns out that if
an unnamed parameter is below a specific size threshold, it gets
register-promoted away by the compiler (hence not encountered during
some parts of DWARF inline info processing), but if it is sufficiently
large, it is allocated to the stack as a named variable and treated as
a regular parameter by DWARF generation. Interestingly, something in
the ppc64le build of k8s causes an unnamed parameter to be retained
(where on amd64 it is deleted), meaning that this wasn't caught in my
amd64 testing.
The fix is to insure that "_" params are treated in the same way that
"~r%d" return temps are when matching up post-optimization inlined
routine params with pre-inlining declarations. I've also updated the
test case to include a "_" parameter with a very large size, which
also triggers the bug on amd64.
Fixes#23179.
Change-Id: I961c84cc7a873ad3f8f91db098a5e13896c4856e
Reviewed-on: https://go-review.googlesource.com/84975
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
The helper routine for returning pre-inlining parameter declarations
wasn't properly handling the case where you have more than one
parameter named "_" in a function signature; this triggered a map
collision later on when the function was inlined and DWARF was
generated for the inlined routine instance.
Fixes#23179.
Change-Id: I12e5d6556ec5ce08e982a6b53666a4dcc1d22201
Reviewed-on: https://go-review.googlesource.com/84755
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This allows errchk to be used with "go vet" output (as opposed to "go tool vet").
Change-Id: I0009a53c9cb74accd5bd3923c137d6dbf9e46326
Reviewed-on: https://go-review.googlesource.com/83836
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We can't currently inline functions that contain closures anyway, so
just delete this budgeting code for now. Re-enable once we can (if
ever) inline functions with nested closures.
Updates #15561.
Fixes#23093.
Change-Id: Idc5f8e042ccfcc8921022e58d3843719d4ab821e
Reviewed-on: https://go-review.googlesource.com/83538
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The package unsafe docs say it's safe to convert an unsafe.Pointer to
uintptr in the argument list to an assembly function, but it was
erroneously only detecting normal pointers converted to unsafe.Pointer
and then to intptr.
Fixes#23051.
Change-Id: Id1be19f6d8f26f2d17ba815191717d2f4f899732
Reviewed-on: https://go-review.googlesource.com/82817
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Pointer arithemetic is done mod 2^32 on 386, so we can just
drop the high bits of any large constant offsets.
The bounds check will make sure wraparounds are never observed.
Fixes#21655
Change-Id: I68ae5bbea9f02c73968ea2b21ca017e5ecb89223
Reviewed-on: https://go-review.googlesource.com/82675
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Make sure that when we're assigning to a map, we evaluate the
right-hand side before we attempt to insert into the map.
We used to evaluate the left-hand side to a pointer-to-slot-in-bucket
(which as a side effect does len(m)++), then evaluate the right-hand side,
then do the assignment. That clearly isn't correct when the right-hand side
might panic.
Fixes#22881
Change-Id: I42a62870ff4bf480568c9bdbf0bb18958962bdf0
Reviewed-on: https://go-review.googlesource.com/81817
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This test was added recently as a regress test for the spec relaxation
in #9060, but doesn't work correctly yet. Disable for now to fix noopt
builders.
Updates #22444.
Change-Id: I45c521ae0da7ffb0c6859d6f7220c59828ac6149
Reviewed-on: https://go-review.googlesource.com/81775
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The DWARF inline info generation hooks weren't properly
handling unused auto vars in certain cases, triggering an assert (now
fixed). Also with this change, introduce a new autom "flavor" to
use for autom entries that are added to insure that a specific
auto type makes it into the linker (this is a follow-on to the fix
for 22941).
Fixes#22962.
Change-Id: I7a2d8caf47f6ca897b12acb6a6de0eb25f5cac8f
Reviewed-on: https://go-review.googlesource.com/81557
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Per the decision for #14844, index expressions that are non-constant
shifts where the LHS operand is representable as an int are now valid.
Fixes#21693.
Change-Id: Ifafad2c0c65975e0200ce7e28d1db210e0eacd9d
Reviewed-on: https://go-review.googlesource.com/81277
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The code that generates the list of DWARF variables for a function
(params and autos) will emit a "no-location" entry in the DWARF for a
user var that appears in the original pre-optimization version of the
function but is no longer around when optimization is complete. The
intent is that if a GDB user types "print foo" (where foo has been
optimized out), the response will be "<optimized out>" as opposed to
"there is no such variable 'foo'). This change fixes said code to
include vars on the autom list for the function, to insure that the
type symbol for the variable makes it to the linker.
Fixes#22941.
Change-Id: Id29f1f39d68fbb798602dfd6728603040624fc41
Reviewed-on: https://go-review.googlesource.com/81415
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
ORANGE node's Right node is the expression it is ranging over,
which is evaluated before the loop. In the escape analysis,
we should walk this node without loop depth incremented.
Fixes#21709.
Change-Id: Idc1e4c76e39afb5a344d85f6b497930a488ce5cf
Reviewed-on: https://go-review.googlesource.com/80740
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
For "type T = U" we were accidentally emitting a #define for "U__size"
instead of "T__size".
Fixes#22877.
Change-Id: I5ed6757d697753ed6d944077c16150759f6e1285
Reviewed-on: https://go-review.googlesource.com/80759
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The signature of the mapassign_fast* routines need to distinguish
the pointerness of their key argument. If the affected routines
suspend part way through, the object pointed to by the key might
get garbage collected because the key is typed as a uint{32,64}.
This is not a problem for mapaccess or mapdelete because the key
in those situations do not live beyond the call involved. If the
object referenced by the key is garbage collected prematurely, the
code still works fine. Even if that object is subsequently reallocated,
it can't be written to the map in time to affect the lookup/delete.
Fixes#22781
Change-Id: I0bbbc5e9883d5ce702faf4e655348be1191ee439
Reviewed-on: https://go-review.googlesource.com/79018
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
CL 76551 modified inline_callers.go to build everything, including the
runtime, with -l=4. While that works in most places (and ideally
should work everywhere), it blows out the nosplit stack on
solaris/amd64.
Fix this by only building the test itself with -l=4.
This undoes some of the changes to this test from CL 73212, which
originally changed the go tool to rebuild all packages with the given
flags. This change modified the expected output of this test, so now
that we can go back to building only the test itself with inlining, we
revert these changes to the expected output. (That CL also changed
log.Fatalf to log.Printf, but didn't add "\n" to the end of the lines,
so this CL fixes that, too.)
Fixes#22797.
Change-Id: I6a91963a59ebe98edbe0921d8717af6b2c2191b0
Reviewed-on: https://go-review.googlesource.com/79197
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Improve the error message for wrong
case-field names in composite literals,
by mentioning the correct field name.
Given the program:
package main
type it struct {
ID string
}
func main() {
i1 := &it{id: "Bar"}
}
just like we do for usage of fields, we now
report wrongly cased fields as hints to give:
ts.go:8:14: unknown field 'id' in struct literal of type it (but does have ID)
instead of before:
ts.go:8:14: unknown field 'id' in struct literal of type it
Fixes#22794
Change-Id: I18cd70e75817025cb1df083503cae306e8d659fd
Reviewed-on: https://go-review.googlesource.com/78545
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This test fails on 1.9.2, but is ok on tip.
CL 77331 has both the 1.9.2 fix and this test, and is on the 1.9 release branch.
This CL is just the test, and is on HEAD. The buggy code doesn't exist on tip.
Update #22683
Change-Id: I04a24bd6c2d3068e18ca81da3347e2c1366f4447
Reviewed-on: https://go-review.googlesource.com/77332
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Also, with this change, error locations don't print absolute positions
in [] brackets following positions relative to line directives. To get
the absolute positions as well, specify the -L flag.
Fixes#22660.
Change-Id: I9ecfa254f053defba9c802222874155fa12fee2c
Reviewed-on: https://go-review.googlesource.com/77090
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
It has always been problematic that there was no way to specify
tool flags that applied only to the build of certain packages;
it was only to specify flags for all packages being built.
The usual workaround was to install all dependencies of something,
then build just that one thing with different flags. Since the
dependencies appeared to be up-to-date, they were not rebuilt
with the different flags. The new content-based staleness
(up-to-date) checks see through this trick, because they detect
changes in flags. This forces us to address the underlying problem
of providing a way to specify per-package flags.
The solution is to allow -gcflags=pattern=flags, which means
that flags apply to packages matching pattern, in addition to the
usual -gcflags=flags, which is now redefined to apply only to
the packages named on the command line.
See #22527 for discussion and rationale.
Fixes#22527.
Change-Id: I6716bed69edc324767f707b5bbf3aaa90e8e7302
Reviewed-on: https://go-review.googlesource.com/76551
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Plain blocks that contain only uninteresting instructions
(that do not have reliable Pos information themselves)
need to have their Pos left unset so that they can
inherit it from their successors. The "uninteresting"
test was not properly applied and not properly defined.
OpFwdRef does not appear in the ssa.html debugging output,
but at the time of the test these instructions did appear,
and it needs to be part of the test.
Fixes#22365.
Change-Id: I99e5b271acd8f6bcfe0f72395f905c7744ea9a02
Reviewed-on: https://go-review.googlesource.com/74252
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
They could get picked up by reflect code, yielding the wrong type.
Fixes#22605
Change-Id: Ie11fb361ca7f3255e662037b3407565c8f0a2c4c
Reviewed-on: https://go-review.googlesource.com/76315
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Be more pessimistic when parsing if/switch/for headers for better error
messages when things go wrong.
Fixes#22581.
Change-Id: Ibb99925291ff53f35021bc0a59a4c9a7f695a194
Reviewed-on: https://go-review.googlesource.com/76290
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Updates #21317
@mdempsky fixed issue #21317 with CL 66810,
so lock a test in to ensure we don't regress.
The test is manual for now before test/run.go
has support for matching column numbers so do
it old school and match expected output after
an exec.
Change-Id: I6c2a66ddf04248f79d17ed7033a3280d50e41562
Reviewed-on: https://go-review.googlesource.com/76150
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, assigning a []T where T is a go:notinheap type generates an
unnecessary write barrier for storing the slice pointer.
This fixes this by teaching HasHeapPointer that this type does not
have a heap pointer, and tweaking the lowering of slice assignments so
the pointer store retains the correct type rather than simply lowering
it to a *uint8 store.
Change-Id: I8bf7c66e64a7fefdd14f2bd0de8a5a3596340bab
Reviewed-on: https://go-review.googlesource.com/76027
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Updates #22389
@mdempsky's CL 70850 fixed the unnecessary
compile stack trace printing during ICE diagnostics.
This CL adds a test to lock in this behavior.
Change-Id: I9ce49923c80b78cb8c0bb5dc4af3c860a43d63ba
Reviewed-on: https://go-review.googlesource.com/74630
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
CL 65071 enabled inlining for local closures with no captures.
To determine safety of inlining a call sites, we check whether the
variable holding the closure has any assignments after its original
definition.
Unfortunately, that check did not catch OAS2MAPR and OAS2DOTTYPE,
leading to incorrect inlining when a variable holding a closure was
subsequently reassigned through a type conversion or a 2-valued map
access.
There was another more subtle issue wherein reassignment check would
always return a false positive for closure calls inside other
closures. This was caused by the Name.Curfn field of local variables
pointing to the OCLOSURE node instead of the corresponding ODCLFUNC,
which resulted in reassigned walking an empty Nbody and thus never
seeing any reassignments.
This CL fixes these oversights and adds many more tests for closure
inlining which ensure not only that inlining triggers but also the
correctness of the resulting code.
Updates #15561
Change-Id: I74bdae849c4ecfa328546d6d62b512e8d54d04ce
Reviewed-on: https://go-review.googlesource.com/75770
Reviewed-by: Hugues Bruant <hugues.bruant@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Instead of trying to validate map key types eagerly in some
cases, delay their validation to the end of type-checking,
when we all type information is present.
Passes go build -toolexec 'toolstash -cmp' -a std .
Fixes#21273.
Fixes#21657.
Change-Id: I532369dc91c6adca1502d6aa456bb06b57e6c7ff
Reviewed-on: https://go-review.googlesource.com/75310
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Handle make(map[any]any) and make(map[any]any, hint) where
hint <= BUCKETSIZE special to allow for faster map initialization
and to improve binary size by using runtime calls with fewer arguments.
Given hint is smaller or equal to BUCKETSIZE in which case
overLoadFactor(hint, 0) is false and no buckets would be allocated by makemap:
* If hmap needs to be allocated on the stack then only hmap's hash0
field needs to be initialized and no call to makemap is needed.
* If hmap needs to be allocated on the heap then a new special
makehmap function will allocate hmap and intialize hmap's
hash0 field.
Reduces size of the godoc by ~36kb.
AMD64
name old time/op new time/op delta
NewEmptyMap 16.6ns ± 2% 5.5ns ± 2% -66.72% (p=0.000 n=10+10)
NewSmallMap 64.8ns ± 1% 56.5ns ± 1% -12.75% (p=0.000 n=9+10)
Updates #6853
Change-Id: I624e90da6775afaa061178e95db8aca674f44e9b
Reviewed-on: https://go-review.googlesource.com/61190
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The test was skipped because it did not work on AMD64 with
frame pointer enabled, and accidentally skipped on other
architectures. Now frame pointer is the default on AMD64.
Update the test to work with frame pointer. Now the test
is skipped only when frame pointer is NOT enabled on AMD64.
Fixes#18317.
Change-Id: I724cb6874e562f16e67ce5f389a1d032a2003115
Reviewed-on: https://go-review.googlesource.com/68610
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This cuts 6 seconds off all.bash with the new go command.
Not a ton, but also an easy 6 seconds to grab.
The -tags=use_go_run in the misc/cgo tests is just some
go command flag that will make run.go use go run,
but without making everything look stale.
(Those tests have relative imports,
so go tool compile+link is not enough.)
Change-Id: I43bf4bb661d3adde2b2d4aad5e8f64b97bc69ba9
Reviewed-on: https://go-review.googlesource.com/73994
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL changes the go command to base all its rebuilding decisions
on the content of the files being processed and not their file system
modification times. It also eliminates the special handling of release
toolchains, which were previously considered always up-to-date
because modification time order could not be trusted when unpacking
a pre-built release.
The go command previously tracked "build IDs" as a backup to
modification times, to catch changes not reflected in modification times.
For example, if you remove one .go file in a package with multiple .go
files, there is no modification time remaining in the system that indicates
that the installed package is out of date. The old build ID was the hash
of a list of file names and a few other factors, expected to change if
those factors changed.
This CL moves to using this kind of build ID as the only way to
detect staleness, making sure that the build ID hash includes all
possible factors that need to influence the rebuild decision.
One such factor is the compiler flags. As of this CL, if you run
go build -gcflags -N cmd/gofmt
you will get a gofmt where every package is built with -N,
regardless of what may or may not be installed already.
Another such factor is the linker flags. As of this CL, if you run
go install myprog
go install -ldflags=-s myprog
the second go install will now correctly build a new myprog with
the updated linker flags. (Previously the installed myprog appeared
up-to-date, because the ldflags were not included in the build ID.)
Because we have more precise information we can also validate whether
the target of a "go test -c" operation is already the right binary and
therefore can avoid a rebuild.
This CL sets us up for having a more general build artifact cache,
maybe even a step toward not having a pkg directory with .a files,
but this CL does not take that step. For now the result of go install
is the same as it ever was; we just do a better job of what needs to
be installed.
This CL does slow down builds a small amount by reading all the
dependent source files in full. (The go command already read the
beginning of every dependent source file to discover build tags
and imports.) On my MacBook Pro, before this CL all.bash takes
3m58s, while after this CL and a few optimizations stacked above it
all.bash takes 4m28s. Given that CL 73850 cut 1m43s off the all.bash
time earlier today, we can afford adding 30s back for now.
More optimizations are planned that should make the go command
more efficient than it was even before this CL.
Fixes#15799.
Fixes#18369.
Fixes#19340.
Fixes#21477.
Change-Id: I10d7ca0e31ca3f58aabb9b1f11e2e3d9d18f0bc9
Reviewed-on: https://go-review.googlesource.com/73212
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
If the go install doesn't use the same flags as the main build
it can overwrite the installed standard library, leading to
flakiness and slow future tests.
Force uses of 'go install' etc to propagate $GO_GCFLAGS
or disable them entirely, to avoid problems.
As I understand it, the main place this happens is the ssacheck builder.
If there are other uses that need to run some of the now-disabled
tests we can reenable fixed tests in followup CLs.
Change-Id: Ib860a253539f402f8a96a3c00ec34f0bbf137c9a
Reviewed-on: https://go-review.googlesource.com/74470
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The test for #18902 reads the assembly stream to be sure
that the line number does not change too often (this is an
indication that debugging the code will be unpleasant and
that the compiler is probably getting line numbers "wrong").
It checks that it is getting "enough" input, but the
compiler has gotten enough better since the test was written
that it now fails for lack of enough input. The old
threshould was 200 instructions, the new one is 150 (the
minimum observed input is on arm64 with 184 instructions).
Fixes#22494.
Change-Id: Ibba7e9ff4ab6a7be369e5dd5859d150b7db94653
Reviewed-on: https://go-review.googlesource.com/74357
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
KeepAlive needs to introduce a use of the spill of the
value it is keeping alive. Without that, we don't guarantee
that the spill dominates the KeepAlive.
This bug was probably introduced with the code to move spills
down to the dominator of the restores, instead of always spilling
just after the value itself (CL 34822).
Fixes#22458.
Change-Id: I94955a21960448ffdacc4df775fe1213967b1d4c
Reviewed-on: https://go-review.googlesource.com/74210
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
Currently copy and append for types containing only scalars and
notinheap pointers still get compiled to have write barriers, even
though those write barriers are unnecessary. Fix these to use
HasHeapPointer instead of just Haspointer so that they elide write
barriers when possible.
This fixes the unnecessary write barrier in runtime.recordspan when it
grows the h.allspans slice. This is important because recordspan gets
called (*very* indirectly) from (*gcWork).tryGet, which is
go:nowritebarrierrec. Unfortunately, the compiler's analysis has no
hope of seeing this because it goes through the indirect call
fixalloc.first, but I saw it happen.
Change-Id: Ieba3abc555a45f573705eab780debcfe5c4f5dd1
Reviewed-on: https://go-review.googlesource.com/73413
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Currently (*Type).HasHeapPointer only ignores pointers go:notinheap
types if the type itself is a pointer to a go:notinheap type. However,
if it's some other type that contains pointers where all of those
pointers are go:notinheap, it will conservatively return true. As a
result, we'll use write barriers where they aren't needed, for example
calling typedmemmove instead of just memmove on structs that contain
only go:notinheap pointers.
Fix this by making HasHeapPointer walk the whole type looking for
pointers that aren't marked go:notinheap.
Change-Id: Ib8c6abf6f7a20f34969d1d402c5498e0b990be59
Reviewed-on: https://go-review.googlesource.com/73412
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The current go:nowritebarrierrec checker has two problems that limit
its coverage:
1. It doesn't understand that systemstack calls its argument, which
means there are several cases where we fail to detect prohibited write
barriers.
2. It only observes calls in the AST, so calls constructed during
lowering by SSA aren't followed.
This CL completely rewrites this checker to address these issues.
The current checker runs entirely after walk and uses visitBottomUp,
which introduces several problems for checking across systemstack.
First, visitBottomUp itself doesn't understand systemstack calls, so
the callee may be ordered after the caller, causing the checker to
fail to propagate constraints. Second, many systemstack calls are
passed a closure, which is quite difficult to resolve back to the
function definition after transformclosure and walk have run. Third,
visitBottomUp works exclusively on the AST, so it can't observe calls
created by SSA.
To address these problems, this commit splits the check into two
phases and rewrites it to use a call graph generated during SSA
lowering. The first phase runs before transformclosure/walk and simply
records systemstack arguments when they're easy to get. Then, it
modifies genssa to record static call edges at the point where we're
lowering to Progs (which is the latest point at which position
information is conveniently available). Finally, the second phase runs
after all functions have been lowered and uses a direct BFS walk of
the call graph (combining systemstack calls with static calls) to find
prohibited write barriers and construct nice error messages.
Fixes#22384.
For #22460.
Change-Id: I39668f7f2366ab3c1ab1a71eaf25484d25349540
Reviewed-on: https://go-review.googlesource.com/72773
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
...because that's an illegal addressing mode.
I double-checked handling of this code, and 387 is the only
place where this check is missing.
Fixes#22429
Change-Id: I2284fe729ea86251c6af2f04076ddf7a5e66367c
Reviewed-on: https://go-review.googlesource.com/73551
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If n.Type==nil after typechecking, then we should have already
reported a more useful error somewhere else. Just return 0 in
evalunsafe without trying to do anything else that's likely to cause
problems.
Also, further split out issue7525.go into more test files, because
cmd/compile reports at most one typechecking loop per compilation
unit.
Fixes#22351.
Change-Id: I3ebf505f72c48fcbfef5ec915606224406026597
Reviewed-on: https://go-review.googlesource.com/72251
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Robert Griesemer <gri@golang.org>
Fine-tune skipping of tokens after missing closing parentheses in lists.
Fixes#22164.
Change-Id: I575d86e21048cd40340a2c08399e8b0deec337cf
Reviewed-on: https://go-review.googlesource.com/71250
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Follow CL 41477 and add two more line position tests for yyerror calls
in the typechecker which are currently not tested.
Update #19683
Change-Id: Iacd865195a3bfba87d8c22655382af267aba47a9
Reviewed-on: https://go-review.googlesource.com/70251
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Previously, we were treating cross-package function calls as free for
inlining budgeting.
In theory, we should be able to recompute InlCost from the
exported/reimported function bodies. However, that process mutates the
structure of the Node AST enough that it doesn't preserve InlCost. To
avoid unexpected issues, just record and restore InlCost in the export
data.
Fixes#19261.
Change-Id: Iac2bc0d32d4f948b64524aca657051f9fc96d92d
Reviewed-on: https://go-review.googlesource.com/70151
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Calls to a closure held in a local, non-escaping,
variable can be inlined, provided the closure body
can be inlined and the variable is never written to.
The current implementation has the following limitations:
- closures with captured variables are not inlined because
doing so naively triggers invariant violation in the SSA
phase
- re-assignment check is currently approximated by checking
the Addrtaken property of the variable which should be safe
but may miss optimization opportunities if the address is
not used for a write before the invocation
Updates #15561
Change-Id: I508cad5d28f027bd7e933b1f793c14dcfef8b5a1
Reviewed-on: https://go-review.googlesource.com/65071
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hugues Bruant <hugues.bruant@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
It should be skipped on 32-bit architectures.
Change-Id: If7a64b9e90e47c3e8734dd62729bfd2944ae926c
Reviewed-on: https://go-review.googlesource.com/70071
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
If the stack frame is too large, abort immediately.
We used to generate code first, then abort.
In issue 22200, generating code raised a panic
so we got an ICE instead of an error message.
Change the max frame size to 1GB (from 2GB).
Stack frames between 1.1GB and 2GB didn't used to work anyway,
the pcln table generation would have failed and generated an ICE.
Fixes#22200
Change-Id: I1d918ab27ba6ebf5c87ec65d1bccf973f8c8541e
Reviewed-on: https://go-review.googlesource.com/69810
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This re-enables functionality that inadvertently was disabled in the
(long) past.
Also, don't perform branch checks if we had errors in a function
to avoid spurious errors or (worst-case) crashes.
Slightly modified test/fixedbugs/issue14006.go to make sure the
test still reports invalid label errors (the surrounding function
must be syntactically correct).
Change-Id: Id5642930877d7cf3400649094ec75c753b5084b7
Reviewed-on: https://go-review.googlesource.com/69770
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We've supported inlining methods called as functions for a while now.
Change-Id: I53fba426e45f91d65a38f00456c2ae1527372b50
Reviewed-on: https://go-review.googlesource.com/69530
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Keep left-to-right order when referring to the number of
variables and values involved.
Fixes#22159.
Change-Id: Iccca12d3222f9d5e049939a9ccec07513c393faa
Reviewed-on: https://go-review.googlesource.com/68690
Reviewed-by: Russ Cox <rsc@golang.org>
C_PPAUTO was matching offsets that is a multiple 8. But this
condition is dropped in CL 55610, causing unaligned offset
between 256 and 504 mistakenly matched to some classes, e.g.
C_UAUTO8K. This CL restores this condition, also fixes an
error that C_PPAUTO shouldn't match C_PSAUTO, because the
latter is not guaranteed to be multiple of 8. C_PPAUTO_8 is
unnecessary, removed.
Fixes#21992.
Change-Id: I75d5a0e5f5dc3dae335721fbec1bbcd4a3b862f2
Reviewed-on: https://go-review.googlesource.com/65730
Reviewed-by: David Chase <drchase@google.com>
Historically, gc optimistically parsed the left-hand side of
assignments as expressions. Later, if it discovered a ":=" assignment,
it rewrote the parsed expressions as declarations.
This failed in the presence of dot imports though, because we lost
information about whether an imported object was named via a bare
identifier "Foo" or a normal qualified "pkg.Foo".
This CL fixes the issue by specially noding the left-hand side of ":="
assignments.
Fixes#22076.
Change-Id: I18190ecdb863112e7d009e1687e6112eec559921
Reviewed-on: https://go-review.googlesource.com/66810
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Use entire inlining call stack to decide whether two panic calls
can be merged. We used to merge panic calls when only the leaf
line numbers matched, but that leads to places higher up the call
stack being merged incorrectly.
Fixes#22083
Change-Id: Ia41400a80de4b6ecf3e5089abce0c42b65e9b38a
Reviewed-on: https://go-review.googlesource.com/67632
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Very similar fix to the one made in golang.org/cl/65655. This time it's
for switches on interface values, as we look for duplicates in a
different manner to keep types in mind.
As before, add a small regression test.
Updates #22001.
Fixes#22063.
Change-Id: I9a55d08999aeca262ad276b4649b51848a627b02
Reviewed-on: https://go-review.googlesource.com/66450
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
If we have
y = <int16> (MOVBQSX x)
z = <int32> (MOVWQSX y)
We used to use this rewrite rule:
(MOVWQSX x:(MOVBQSX _)) -> x
But that resulted in replacing z with a value whose type
is only int16. Then if z is spilled and restored, it gets
zero extended instead of sign extended.
Instead use the rule
(MOVWQSX (MOVBQSX x)) -> (MOVBQSX x)
The result is has the correct type, so it can be spilled
and restored correctly. It might mean that a few more extension
ops might not be eliminated, but that's the price for correctness.
Fixes#21963
Change-Id: I6ec82c3d2dbe43cc1fee6fb2bd6b3a72fca3af00
Reviewed-on: https://go-review.googlesource.com/65290
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is a regression introduced by myself in golang.org/cl/41852,
confirmed by the program that reproduces the crash that can be seen in
the added test.
Fixes#21988.
Change-Id: I18d5b2b3de63ced84db705b18490b00b16b59e02
Reviewed-on: https://go-review.googlesource.com/65655
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The compiler generates wrapper methods to forward interface method
calls (which are always pointer-based) to value methods. These
wrappers appear in the call stack even though they are an
implementation detail. This leaves ugly "<autogenerated>" functions in
stack traces and can throw off skip counts for stack traces.
Fix this by considering these runtime frames in printed stack traces
so they will only be printed if runtime frames are being printed, and
by eliding them from the call stack expansion used by CallersFrames
and Caller.
This removes the test for issue 4388 since that was checking that
"<autogenerated>" appeared in the stack trace instead of something
even weirder. We replace it with various runtime package tests.
Fixes#16723.
Change-Id: Ice3f118c66f254bb71478a664d62ab3fc7125819
Reviewed-on: https://go-review.googlesource.com/45412
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The existing logic tried to advance the offset for each variable's
width, but then tried to undo this logic with the array and struct
handling code. It can all be much simpler by only worrying about
computing offsets within the array and struct code.
While here, include a short-circuit for zero-width arrays to fix a
pedantic compiler failure case.
Passes toolstash-check.
Fixes#20739.
Change-Id: I98af9bb512a33e3efe82b8bf1803199edb480640
Reviewed-on: https://go-review.googlesource.com/64471
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Previously, after inlining a call, we made a second pass to rewrite
the AST's position information to record the inlined stack frame. The
call arguments were part of this AST, but it would be incorrect to
rewrite them too, so extra effort was made to temporarily remove them
while the position rewriting was done.
However, this extra logic was only done for regular arguments: it was
not done for receiver arguments. Consequently if m was inlined in
"f().m(g(), h())", g and h would have correct call frames, but f would
appear to be called by m.
The fix taken by this CL is to merge setpos into inlsubst and only
rewrite position information for nodes that were actually copied from
the original function AST body. As a side benefit, this eliminates an
extra AST pass and some AST walking code.
Fixes#21879.
Change-Id: I22b25c208313fc25c358d3a2eebfc9b012400084
Reviewed-on: https://go-review.googlesource.com/64470
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Previously, we used OXFALL vs OFALL to distinguish fallthrough
statements that had been validated. Because in the Node AST we flatten
statement blocks, OXCASE and OXFALL needed to keep track of their
block scopes for this purpose.
Now that we have an AST that keeps these separate, we can just perform
the validation earlier.
Passes toolstash-check.
Fixes#14540.
Change-Id: I8421eaba16c2b3b72c9c5483b5cf20b14261385e
Reviewed-on: https://go-review.googlesource.com/61130
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
By setting both a valid size and alignment for broken recursive types,
we can appease some more safety checks and prevent compiler crashes.
Fixes#21882.
Change-Id: Ibaa137d8aa2c2a9d521462f144d7016c4abfd6e7
Reviewed-on: https://go-review.googlesource.com/64430
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Refactor walkrange to treat "for _ = range a" as "for range a".
This avoids generating some later discarded nodes in the compiler.
Passes toolstash -cmp.
Change-Id: Ifb2e1ca3b8519cbb67e8ad5aad514af9d18f1ec4
Reviewed-on: https://go-review.googlesource.com/61017
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Currently, we handle "x op= y" by rewriting as "x = x op y", while
ensuring that any calls or receive operations in 'x' are only
evaluated once. Notably, pointer indirection, indexing operations,
etc. are left alone as it's typically safe to re-evaluate those.
However, those operations were interleaved with evaluating 'y', which
could include function calls that might cause re-evaluation to yield
different memory addresses.
As a fix, simply ensure that we order side-effecting operations in 'y'
before either evaluation of 'x'.
Fixes#21687.
Change-Id: Ib14e77760fda9c828e394e8e362dc9e5319a84b2
Reviewed-on: https://go-review.googlesource.com/60091
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Do the similar thing to CL 55143 to reduce IMUL.
Change-Id: I1bd38f618058e3cd74fac181f003610ea13f2294
Reviewed-on: https://go-review.googlesource.com/56252
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The assembler barfs on large offsets. Make sure that all the
instructions that need to have their offsets in an int32
1) check on any rule that computes offsets for such instructions
2) change their aux fields so the check builder checks it.
The assembler also silently misassembled offsets between 1<<31
and 1<<32. Add a check in the assembler to barf on those as well.
Fixes#21655
Change-Id: Iebf24bf10f9f37b3ea819ceb7d588251c0f46d7d
Reviewed-on: https://go-review.googlesource.com/59630
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
For code like the following (where x escapes):
x := []int{1}
We're currently generating a nil check. The line above is really 3 operations:
t := new([1]int)
t[0] = 1
x := t[:]
We remove the nil check for t[0] = 1, but not for t[:].
Our current nil check removal rule is too strict about the possible
memory arguments of the nil check. Unlike zeroing or storing to the
result of runtime.newobject, the nilness of runtime.newobject is
always false, even after other stores have happened in the meantime.
Change-Id: I95fad4e3a59c27effdb37c43ea215e18f30b1e5f
Reviewed-on: https://go-review.googlesource.com/58711
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This is a crude compiler pass to eliminate stores to auto variables
that are only ever written to.
Eliminates an unnecessary store to x from the following code:
func f() int {
var x := 1
return *(&x)
}
Fixes#19765.
Change-Id: If2c63a8ae67b8c590b6e0cc98a9610939a3eeffa
Reviewed-on: https://go-review.googlesource.com/38746
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Where possible generate calls to runtime makemap with int hint argument
during compile time instead of makemap with int64 hint argument.
This eliminates converting the hint argument for calls to makemap with
int64 hint argument for platforms where int64 values do not fit into
an argument of type int.
A similar optimization for makeslice was introduced in CL
golang.org/cl/27851.
386:
name old time/op new time/op delta
NewEmptyMap 53.5ns ± 5% 41.9ns ± 5% -21.56% (p=0.000 n=10+10)
NewSmallMap 182ns ± 1% 165ns ± 1% -8.92% (p=0.000 n=10+10)
Change-Id: Ibd2b4c57b36f171b173bf7a0602b3a59771e6e44
Reviewed-on: https://go-review.googlesource.com/55142
Reviewed-by: Keith Randall <khr@golang.org>
If an error was already printed during LHS conversion step, we don't reprint
the "cannot convert" error.
In particular, this prevents `_ = int("1")` (and all similar casts) from
resulting in multiple identical error messages being printed.
Fixes#20812.
Change-Id: If6e52c59eab438599d641ecf6f110ebafca740a9
Reviewed-on: https://go-review.googlesource.com/46912
Reviewed-by: Robert Griesemer <gri@golang.org>
There are a few cases where this can be useful. Apart from the obvious
(and silly)
100*n + 200*n
where we generate one IMUL instead of two, consider:
15*n + 31*n
Currently, the compiler strength-reduces both imuls, generating:
0x0000 00000 MOVQ "".n+8(SP), AX
0x0005 00005 MOVQ AX, CX
0x0008 00008 SHLQ $4, AX
0x000c 00012 SUBQ CX, AX
0x000f 00015 MOVQ CX, DX
0x0012 00018 SHLQ $5, CX
0x0016 00022 SUBQ DX, CX
0x0019 00025 ADDQ CX, AX
0x001c 00028 MOVQ AX, "".~r1+16(SP)
0x0021 00033 RET
But combining the imuls is both faster and shorter:
0x0000 00000 MOVQ "".n+8(SP), AX
0x0005 00005 IMULQ $46, AX
0x0009 00009 MOVQ AX, "".~r1+16(SP)
0x000e 00014 RET
even without strength-reduction.
Moreover, consider:
5*n + 7*(n+1) + 11*(n+2)
We already have a rule that rewrites 7(n+1) into 7n+7, so the
generated code (without imuls merging) looks like this:
0x0000 00000 MOVQ "".n+8(SP), AX
0x0005 00005 LEAQ (AX)(AX*4), CX
0x0009 00009 MOVQ AX, DX
0x000c 00012 NEGQ AX
0x000f 00015 LEAQ (AX)(DX*8), AX
0x0013 00019 ADDQ CX, AX
0x0016 00022 LEAQ (DX)(CX*2), CX
0x001a 00026 LEAQ 29(AX)(CX*1), AX
0x001f 00031 MOVQ AX, "".~r1+16(SP)
But with imuls merging, the 5n, 7n and 11n factors get merged, and the
generated code looks like this:
0x0000 00000 MOVQ "".n+8(SP), AX
0x0005 00005 IMULQ $23, AX
0x0009 00009 ADDQ $29, AX
0x000d 00013 MOVQ AX, "".~r1+16(SP)
0x0012 00018 RET
Which is both faster and shorter; that's also the exact same code that
clang and the intel c compiler generate for the above expression.
Change-Id: Ib4d5503f05d2f2efe31a1be14e2fe6cac33730a9
Reviewed-on: https://go-review.googlesource.com/55143
Reviewed-by: Keith Randall <khr@golang.org>
The gofmt bug in question seems to be fixed (at least gofmt doesn't
complain), so reenable the commented-out ... test.
Change-Id: Icbfe0511160210557894ec8eb9b206aa6133d486
Reviewed-on: https://go-review.googlesource.com/55030
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
https://golang.org/cl/37508 added an escape analysis test for #12397 to
escape2.go but missed to add it to escape2n.go. The comment at the top
of the former states that the latter should contain all the same tests
and the tests only differ in using -N to compile. Conform to this by
adding the function issue12397 to escape2n.go as well.
Also fix a whitespace difference in escape2.go, so the two files match
exactly (except for the comment at the top).
Change-Id: I3a09cf95169bf2150a25d6b4ec9e147265d36760
Reviewed-on: https://go-review.googlesource.com/54610
Reviewed-by: Avelino <t@avelino.xxx>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
It is possible to have an unexported name with a nil package,
for an embedded field whose type is a pointer to an unexported type.
We must encode that fact in the type..namedata symbol name,
to avoid incorrectly merging an unexported name with an exported name.
Fixes#21120
Change-Id: I2e3879d77fa15c05ad92e0bf8e55f74082db5111
Reviewed-on: https://go-review.googlesource.com/50710
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Load/store-merging and move optimizations can result in unaligned
memory accesses. This is fine so long as the load/store instruction
used does not take a relative offset. In the SSA rules this means we
must not merge (MOVDaddr (SB)) ops into loads/stores unless we can
guarantee the alignment of the target.
Fixes#21048.
Change-Id: I70f13a62a148d5f0a56e704e8f76e36b4a4226d9
Reviewed-on: https://go-review.googlesource.com/49250
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Framepointer is the default now. Only print an X: list
if the settings are _not_ the default.
Before:
$ go tool compile -V
compile version devel +a5f30d9508 Sun Jul 16 14:43:48 2017 -0400 X:framepointer
$ go1.8 tool compile -V
compile version go1.8 X:framepointer
$
After:
$ go tool compile -V
compile version devel +a5f30d9508 Sun Jul 16 14:43:48 2017 -0400
$ go1.9 tool compile -V # imagined
compile version go1.9
$
Perpetuates #18317.
Change-Id: I981ba5c62be32e650a166fc9740703122595639b
Reviewed-on: https://go-review.googlesource.com/49252
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
On a slow or distracted machine, 0.1s is sometimes
not long enough for a non-blocking function call to complete.
This causes rare test flakes.
They can be easily reproduced by reducing the wait time to (say) 100ns.
For non-blocking functions, increase the window from 100ms to 10s.
Using different windows for block and non-blocking functions,
allows us to reduce the time for blocking functions.
The risk here is false negatives, but that risk is low;
this test is run repeatedly on many fast machines,
for which 10ms is ample time.
This reduces the time required to run the test by a factor of 10,
from ~1s to ~100ms.
Fixes#20299
Change-Id: Ice9a641a66c6c101d738a2ebe1bcb144ae3c9916
Reviewed-on: https://go-review.googlesource.com/47812
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If the LHS is unassignable, there's no point in trying to make sure
the RHS can be assigned to it or making sure they're realizable
types. This is consistent with go/types.
In particular, this prevents "1 = 2" from causing a panic when "1"
still ends up with the type "untyped int", which is not realizable.
Fixes#20813.
Change-Id: I4710bdaac2e375ef12ec29b888b8ac84fb640e56
Reviewed-on: https://go-review.googlesource.com/46835
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Fixes crash when printing a related error message later on.
Fixes#20789.
Change-Id: I6d2c35aafcaeda26a211fc6c8b7dfe4a095a3efe
Reviewed-on: https://go-review.googlesource.com/46713
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Loops of the form "for i,e := range" needed to have their
condition rotated to the "bottom" for the preemptible loops
GOEXPERIMENT, but this caused a performance regression
because it degraded bounds check removal. For now, make
the loop rotation/guarding conditional on the experiment.
Fixes#20711.
Updates #10958.
Change-Id: Icfba14cb3b13a910c349df8f84838cf4d9d20cf6
Reviewed-on: https://go-review.googlesource.com/46410
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Minimal reconstruction of reported failure case.
Manually verified that test fails with CL 45911 reverted.
Change-Id: Ia5d11500d91b46ba1eb5d841db3987edb9136c39
Reviewed-on: https://go-review.googlesource.com/45970
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Before CL 36170, we identified all function bodies that needed to be
exported before writing any export data.
With CL 36170, we started identifying additional functions while
exporting function bodies. As a consequence, we cannot use a
range-based for loop for iterating over function bodies anymore.
Fixes#18895.
Change-Id: I9cbefa8d311ca8c9898c8272b2ac365976b02396
Reviewed-on: https://go-review.googlesource.com/45817
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
These are used by DIV[U] and MOD[U] assembly instructions.
Add a test in the stdlib so we actually exercise linking
to these routines.
Update #19507
Change-Id: I0d8e19a53e3744abc0c661ea95486f94ec67585e
Reviewed-on: https://go-review.googlesource.com/45703
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The existing code used Type.String() to obtain the name of a type;
specifically type reflect.Method in this case. However, Type.String()
formatting is intended for error messages and uses the format
pkgpath.name instead of pkgname.name if a package (in this case
package reflect) is imported multiple times. As a result, the
reflect.Method type detection failed under peculiar circumstances
(see the included test case).
Thanks to https://github.com/ericlagergren for tracking down
an easy way to make the bug disappear (which in turn directly
led to the underlying cause).
Fixes#19028.
Change-Id: I1b9c5dfd183260a9be74969fe916a94146fc36da
Reviewed-on: https://go-review.googlesource.com/45777
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This results in names to unexported fields like
net.(*Dialer)."".deadline instead of net.(*Dialer).deadline.
Fixes#18419.
Change-Id: I0415c68b77cc16125c2401320f56308060ac3f25
Reviewed-on: https://go-review.googlesource.com/44070
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Arguments to inlined calls are hidden from setPos as follows:
args := as.Rlist
as.Rlist.Set(nil)
// setPos...
as.Rlist.Set(args.Slice())
Previously, this code had no effect since the value of as was
overwritten by the assignment in the retvars loop.
Fixes#19799.
Change-Id: Iaf97259f82fdba8b236136337cc42b2774c7fef5
Reviewed-on: https://go-review.googlesource.com/44351
Run-TryBot: David Lazar <lazard@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Apply the fix in CL 44355 to MIPS.
ARM64 has these rules but commented out for performance reason.
Fix the commented rules, in case they are enabled in the future.
Enhance the test so it triggers the failure on ARM and MIPS without
the fix.
Updates #20530.
Change-Id: I82d77448e3939a545fe519d0a29a164f8fa5417c
Reviewed-on: https://go-review.googlesource.com/44430
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Replacing byteload-of-bytestore-of-x with x is incorrect
when x contains a larger-than-byte value (and so on for
16 and 32-bit load/store pairs). Replace "x" with the
appropriate zero/sign extension of x, which if unnecessary
will be repaired by other rules.
Made logic for arm match x86 and amd64; yields minor extra
optimization, plus I am (much) more confident it's correct,
despite inability to reproduce bug on arm.
Ppc64 lacks this optimization, hence lacks this problem.
See related https://golang.org/cl/37154/Fixes#20530.
Change-Id: I6af9cac2ad43bee99cafdcb04725ce7e55a43323
Reviewed-on: https://go-review.googlesource.com/44355
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Instead of just printing the value, print the original node to make the
error more human-friendly. Also print the value if its string form is
different than the original node, to make sure it's obvious what value
was duplicated.
This means that "case '@', '@':", which used to print:
duplicate case 64 in switch
Will now print:
duplicate case '@' (value 64) in switch
Factor this logic out into its own function to reuse it in range cases
and any other place where we might want to print a node and its value in
the future.
Also needed to split the errorcheck files because expression switch case
duplicates are now detected earlier, so they stop the compiler before it
gets to generating the AST and detecting the type switch case
duplicates.
Fixes#20112.
Change-Id: I9009b50dec0d0e705e5de9c9ccb08f1dce8a5a99
Reviewed-on: https://go-review.googlesource.com/41852
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
These are functional tests, so it is safe to gofmt them.
Change-Id: I3067279c1d49809ac6a62054448ab8a6c3de9bda
Reviewed-on: https://go-review.googlesource.com/43623
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Cannot reproduce original problem. Compiler internals
have changed enough such that this appears to work now.
Restore original test (exported interfaces), but also
keep version of the test using non-exported interfaces.
Fixes#15596.
Change-Id: Idb32da80239963242bd5d1609343c80f19773b0c
Reviewed-on: https://go-review.googlesource.com/43622
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
When compiling concurrently, we walk all functions before compiling
any of them. Walking functions can cause variables to switch from
being non-addrtaken to addrtaken, e.g. to prepare for a runtime call.
Typechecking propagates addrtaken-ness of closure variables to
their outer variables, so that capturevars can decide whether to
pass the variable's value or a pointer to it.
When all functions are compiled immediately, as long as the containing
function is compiled prior to the closure, this propagation has no effect.
When compilation is deferred, though, in rare cases, this results in
a change in the addrtaken-ness of a variable in the outer function,
which in turn changes the compiler's output.
(This is rare because in a great many cases, a temporary has been
introduced, insulating the outer variable from modification.)
But concurrent compilation must generate identical results.
To fix this, track whether capturevars has run.
If it has, there is no need to update outer variables
when closure variables change.
Capturevars always runs before any functions are walked or compiled.
The remainder of the changes in this CL are to support the test.
In particular, -d=compilelater forces the compiler to walk all
functions before compiling any of them, despite being non-concurrent.
This is useful because -live is fundamentally incompatible with
concurrent compilation, but we want -c=1 to have no behavior changes.
Fixes#20250
Change-Id: I89bcb54268a41e8588af1ac8cc37fbef856a90c2
Reviewed-on: https://go-review.googlesource.com/42853
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Tuple ops are weird. They are essentially a pair of ops,
one which consumes a mem and one which generates a mem (the Select1).
The schedule pass didn't handle these quite right.
Fix the scheduler to include both parts of the paired op in
the store chain. That makes sure that loads are correctly ordered
with respect to the first of the pair.
Add a check for the ssacheck builder, that there is only one
live store at a time. I thought we already had such a check, but
apparently not...
Fixes#20335
Change-Id: I59eb3446a329100af38d22820b1ca2190ca46a78
Reviewed-on: https://go-review.googlesource.com/43294
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The writebarrier test has to change.
Now that T23 composite literals are passed to the backend,
they get SSA'd, so writes to their fields are treated separately,
so the relevant part of the first write to t23 is now a dead store.
Preserve the intent of the test by splitting it up into two functions.
Reduces code size a bit:
name old object-bytes new object-bytes delta
Template 386k ± 0% 386k ± 0% ~ (all equal)
Unicode 202k ± 0% 202k ± 0% ~ (all equal)
GoTypes 1.16M ± 0% 1.16M ± 0% ~ (all equal)
Compiler 3.92M ± 0% 3.91M ± 0% -0.19% (p=0.008 n=5+5)
SSA 7.91M ± 0% 7.91M ± 0% ~ (all equal)
Flate 228k ± 0% 228k ± 0% -0.05% (p=0.008 n=5+5)
GoParser 283k ± 0% 283k ± 0% ~ (all equal)
Reflect 952k ± 0% 952k ± 0% -0.06% (p=0.008 n=5+5)
Tar 188k ± 0% 188k ± 0% -0.09% (p=0.008 n=5+5)
XML 406k ± 0% 406k ± 0% -0.02% (p=0.008 n=5+5)
[Geo mean] 649k 648k -0.04%
Fixes#18872
Change-Id: Ifeed0f71f13849732999aa731cc2bf40c0f0e32a
Reviewed-on: https://go-review.googlesource.com/43154
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reuse block head or preceding instruction's line number for
register allocator's spill, fill, copy, rematerialization
instructionsl; and also for phi, and for no-src-pos
instructions. Assembler creates same line number tables
for copy-predecessor-line and for no-src-pos,
but copy-predecessor produces better-looking assembly
language output with -S and with GOSSAFUNC, and does not
require changes to tests of existing assembly language.
Split "copyInto" into two cases, one for register allocation,
one for otherwise. This caused the test score line change
count to increase by one, which may reflect legitimately
useful information preserved. Without any special treatment
for copyInto, the change count increases by 21 more, from
51 to 72 (i.e., quite a lot).
There is a test; using two naive "scores" for line number
churn, the old numbering is 2x or 4x worse.
Fixes#18902.
Change-Id: I0a0a69659d30ee4e5d10116a0dd2b8c5df8457b1
Reviewed-on: https://go-review.googlesource.com/36207
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
If there were more unused imports than
the maximum default number of errors to report,
the set of reported imports was non-deterministic.
Fix by accumulating and sorting them prior to output.
Fixes#20298
Change-Id: Ib3d5a15fd7dc40009523fcdc1b93ddc62a1b05f2
Reviewed-on: https://go-review.googlesource.com/42954
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
If we've already complained about a type T,
don't complain again about further expressions
involving it.
Fixes#20245 and hopefully all of its ilk.
Change-Id: Ic0abe8235d52e8a7ac40e3615aea8f3a54fd7cec
Reviewed-on: https://go-review.googlesource.com/42690
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Compile:
package p
var f = func(...A)
Before this CL:
x.go:3:13: type %!v(PANIC=runtime error: invalid memory address or nil pointer dereference) is not an expression
x.go:3:17: undefined: A
After this CL:
x.go:3:13: type func(...<T>) is not an expression
x.go:3:17: undefined: A
Found with go-fuzz.
Fixes#20233
Change-Id: Ibb232b3954c4091071440eba48b44c4022a8083f
Reviewed-on: https://go-review.googlesource.com/42610
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Because the hint parameter is supposed to be treated
purely as a hint, if it doesn't meet the requirements
we disregard it and continue as if there was no hint
at all.
Fixes#19926
Change-Id: I86e7f99472fad6b99ba4e2fd33e4a9e55d55115e
Reviewed-on: https://go-review.googlesource.com/40854
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Without this, T can sneak through to the backend
with its width unknown.
Fixes#20174
Change-Id: I9b21e0e2641f75e360cc5e45dcb4eefe8255b675
Reviewed-on: https://go-review.googlesource.com/42175
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Updates #18089.
Test for that issue; it was inadvertently fixed
by CL 34988. Ensure that we don't regress on the fix.
Change-Id: Icb85fc20dbb0a47f028f088281319b552b16759d
Reviewed-on: https://go-review.googlesource.com/42173
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The code in #20162 contains an embedded interface.
It didn't get dowidth'd by the frontend,
and during DWARF generation, ngotype asked
for a string description of it,
which triggered a request for the number of fields
in the interface, which triggered a dowidth,
which is disallowed in the backend.
The other changes in this CL are to support the test.
Fixes#20162
Change-Id: I4d0be5bd949c361d4cdc89a8ed28b10977e40cf9
Reviewed-on: https://go-review.googlesource.com/42131
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
dowidth is fundamentally unsafe to call from the back end;
it will cause data races.
Replace all calls to dowidth in the backend with
assertions that the width has been calculated.
Then fix all the cases in which that was not so,
including the cases from #20145.
Fixes#20145.
Change-Id: Idba3d19d75638851a30ec2ebcdb703c19da3e92b
Reviewed-on: https://go-review.googlesource.com/41970
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
When a constant doesn't fit in a single instruction, use two
paired instructions instead of the constant pool. For example
ADD $0xaa00bb, R0, R1
Used to rewrite to:
MOV ?(IP), R11
ADD R11, R0, R1
Instead, do:
ADD $0xaa0000, R0, R1
ADD $0xbb, R1, R1
Same number of instructions.
Good:
4 less bytes (no constant pool entry)
One less load.
Bad:
Critical path is one instruction longer.
It's probably worth it to avoid the loads, they are expensive.
Dave Cheney got us some performance numbers: https://perf.golang.org/search?q=upload:20170426.1
TL;DR mean 1.37% improvement.
Change-Id: Ib206836161fdc94a3962db6f9caa635c87d57cf1
Reviewed-on: https://go-review.googlesource.com/41612
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This change adds line position tests for several yyerror calls in the
typechecker that are currently not tested in any way.
Untested yyerror calls were found by replacing them with
yerrorl(src.NoXPos, ...)
(thus destroying position information in the error), and then running
the test suite. No failures means no test coverage for the relevant
yyerror call.
For #19683
Change-Id: Iedb3d2f02141b332e9bfa76dbf5ae930ad2fddc3
Reviewed-on: https://go-review.googlesource.com/41477
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
doubleselect.go defines a flag to control the number of iterations,
but never called flag.Parse so it was unusable.
Change-Id: Ib5d0c7119e7f7c9a808dcc02d0d9cc6ba5bbc16e
Reviewed-on: https://go-review.googlesource.com/41299
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
At VARKILLs, zero a variable if it is ambiguously live.
After the VARKILL anything this variable references
might be collected. If it were to become live again later,
the GC will see references to already-collected objects.
We don't know a variable is ambiguously live until very
late in compilation (after lowering, register allocation, ...),
so it is hard to generate the code in an arch-independent way.
We also have to be careful not to clobber any registers.
Fortunately, this almost never happens so performance is ~irrelevant.
There are only 2 instances where this triggers in the stdlib.
Fixes#20029
Change-Id: Ia9585a91d7b823fad4a9d141d954464cc7af31f4
Reviewed-on: https://go-review.googlesource.com/41076
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Follow-up on https://go-review.googlesource.com/#/c/39998/
which dropped this information.
The reported blocks are the innermost blocks containing a
label jumped to from outside, not the outermost block as
reported originally by cmd/compile.
We could report the outermost block with a slighly more
involved algorithm (need to track containing blocks for
all unresolved forward gotos), but since gccgo also reports
the innermost blocks, the current approach seems good enough.
Change-Id: Ic0235b8fafe8d5f99dc9872b58e90e8d9e72c5db
Reviewed-on: https://go-review.googlesource.com/40980
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Marvin Stenger <marvin.stenger94@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Instead of a separate check control flow pass (checkcfg.go)
operating on nodes, perform this check at parse time on the
new syntax tree. Permits this check to be done concurrently,
and doesn't depend on the specifics of the symbol's dclstack
implementation anymore. The remaining dclstack uses will be
removed in a follow-up change.
- added CheckBranches Mode flag (so we can turn off the check
if we only care about syntactic correctness, e.g. for tests)
- adjusted test/goto.go error messages: the new branches
checker only reports if a goto jumps into a block, but not
which block (we may want to improve this again, eventually)
- also, the new branches checker reports one variable that
is being jumped over by a goto, but it may not be the first
one declared (this is fine either way)
- the new branches checker reports additional errors for
fixedbugs/issue14006.go (not crucial to avoid those errors)
- the new branches checker now correctly reports only
variable declarations being jumped over, rather than
all declarations (issue 8042). Added respective tests.
Fixes#8042.
Change-Id: I53b6e1bda189748e1e1fb5b765a8a64337c27d40
Reviewed-on: https://go-review.googlesource.com/39998
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Now only cmd/asm and cmd/compile depend on cmd/internal/obj. Changing
the assembler backends no longer requires reinstalling cmd/link or
cmd/addr2line.
There's also now one canonical definition of the object file format in
cmd/internal/objabi/doc.go, with a warning to update all three
implementations.
objabi is still something of a grab bag of unrelated code (e.g., flag
and environment variable handling probably belong in a separate "tool"
package), but this is still progress.
Fixes#15165.
Fixes#20026.
Change-Id: Ic4b92fac7d0d35438e0d20c9579aad4085c5534c
Reviewed-on: https://go-review.googlesource.com/40972
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This rewrites runtime.Caller in terms of stackExpander, which already
handles inlined frames and partially skipped frames. This also has the
effect of making runtime.Caller understand cgo frames if there is a cgo
symbolizer.
Updates #19348.
Change-Id: Icdf4df921aab5aa394d4d92e3becc4dd169c9a6e
Reviewed-on: https://go-review.googlesource.com/40270
Run-TryBot: David Lazar <lazard@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
The fixedbugs/issue12536.go file was erroneously deleted just before
committing the patch that fixed the issue (CL 14400).
That's an easy test and there's a small reproducer in the issue, add
it back.
Updates #12536
Change-Id: Ib7b0cd245588299e9a5469e1d75805fd0261ce1a
Reviewed-on: https://go-review.googlesource.com/40712
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Also adjust truncfltlit to make it more similar to trunccmplxlit, and
make it report an error for bad Etypes.
Fixes#19947
Change-Id: I6684523e989c2293b8a8e85bd2bfb9c399c5ea36
Reviewed-on: https://go-review.googlesource.com/40453
Reviewed-by: Robert Griesemer <gri@golang.org>
When casting an ideal to complex{64,128}, for example during the
evaluation of
var a = complex64(0) / 1e-50
we want the compiler to report a division-by-zero error if a divisor
would be zero after the cast.
We already do this for floats; for example
var b = float32(0) / 1e-50
generates a 'division by zero' error at compile time (because
float32(1e-50) is zero, and the cast is done before performing the
division).
There's no such check in the path for complex{64,128} expressions, and
no cast is performed before the division in the evaluation of
var a = complex64(0) / 1e-50
which compiles just fine.
This patch changes the convlit1 function so that complex ideals
components (real and imag) are correctly truncated to float{32,64}
when doing an ideal -> complex{64, 128} cast.
Fixes#11674
Change-Id: Ic5f8ee3c8cfe4c3bb0621481792c96511723d151
Reviewed-on: https://go-review.googlesource.com/37891
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Continues outside of a loop are not allowed. Most of these possibilities
were tested in label1.go, but one was missing - a plain continue in a
switch/select but no enclosing loop.
This used to error with a "continue not in loop" in 1.8, but recently
was broken by c03e75e5. In particular, innerloop does not only account
for loops, but also for switches and selects. Swap it by bools that
track whether breaks and continues should be allowed.
While at it, improve the wording of errors for breaks that are not where
they should be. Change "loop" by "loop, switch, or select" since they
can be used in any of those.
And add tests to make sure this isn't broken again. Use a separate func
since I couldn't get the compiler to crash on f() itself, possibly due
to the recursive call on itself.
Fixes#19934.
Change-Id: I8f09c6c2107fd95cac50efc2a8cb03cbc128c35e
Reviewed-on: https://go-review.googlesource.com/40357
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
This avoids false positives
like those found in #19880.
Fixes#19880
Change-Id: I583c16cc3c71e7462a72500db9ea2547c468f8c1
Reviewed-on: https://go-review.googlesource.com/40255
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Given code such as
type T struct {
_ string
}
func f() {
var x = T{"space"}
// ...
}
the compiler rewrote the 'var x' line as
var x T
x._ = "space"
The compiler then rejected the assignment to
a blank field, thus rejecting valid code.
It also failed to catch a number of invalid assignments.
And there were insufficient checks for validity
when emitting static data, leading to ICEs.
To fix, check earlier for explicit blanks field names,
explicitly handle legit blanks in sinit,
and don't try to emit static data for nodes
for which typechecking has failed.
Fixes#19482
Change-Id: I594476171d15e6e8ecc6a1749e3859157fe2c929
Reviewed-on: https://go-review.googlesource.com/38006
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently we expand comparison with small constant strings into len check
and a sequence of byte comparisons. Generate 16/32/64-bit comparisons,
instead of bytewise on 386 and amd64. Also increase limits on what is
considered small constant string.
Shaves ~30kb (0.5%) from go executable.
This also updates test/prove.go to keep test case valid.
Change-Id: I99ae8871a1d00c96363c6d03d0b890782fa7e1d9
Reviewed-on: https://go-review.googlesource.com/38776
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Dupok symbols may be defined in multiple packages. Its associated
package is chosen sort of arbitrarily (the first containing package
that the linker loads). Canonicalize its package to the package
with which it will be laid down in text, which is the first package
in dependency order that defines the symbol. So later passes (for
example, trampoline insertion pass) know that the dupok symbol
is laid down along with the package.
Fixes#19764.
Change-Id: I7cbc7474ff3016d5069c8b7be04af934abab8bc3
Reviewed-on: https://go-review.googlesource.com/39150
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: David Chase <drchase@google.com>
Now that we no longer generate dead code,
it is possible to follow block predecessors
into infinite loops with no variable definitions,
causing an infinite loop during phi insertion.
To fix that, check explicitly whether the predecessor
is dead in lookupVarOutgoing, and if so, bail.
The loop in lookupVarOutgoing is very hot code,
so I am wary of adding anything to it.
However, a long, CPU-only benchmarking run shows no
performance impact at all.
Fixes#19783
Change-Id: I8ef8d267e0b20a29b5cb0fecd7084f76c6f98e47
Reviewed-on: https://go-review.googlesource.com/38913
Reviewed-by: David Chase <drchase@google.com>
The uintptr-typed Data field in reflect.SliceHeader and
reflect.StringHeader needs special treatment because it is
really a pointer. Add the special treatment in walk for
bug #19168 to escape analysis.
Includes extra debugging that was helpful.
Fixes#19743.
Change-Id: I6dab5002f0d436c3b2a7cdc0156e4fc48a43d6fe
Reviewed-on: https://go-review.googlesource.com/38738
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Previously, an inlined call to wg.Done() in package main would have the
following incorrect symbol name:
main.(*sync.WaitGroup).Done
This change modifies methodname to return the correct symbol name:
sync.(*WaitGroup).Done
This fix was suggested by @mdempsky.
Fixes#19467.
Change-Id: I0117838679ac5353789299c618ff8c326712d94d
Reviewed-on: https://go-review.googlesource.com/37866
Reviewed-by: Austin Clements <austin@google.com>
The `skip` argument passed to runtime.Caller and runtime.Callers should
be interpreted as the number of logical calls to skip (rather than the
number of physical stack frames to skip). This changes runtime.Callers
to skip inlined calls in addition to physical stack frames.
The result value of runtime.Callers is a slice of program counters
([]uintptr) representing physical stack frames. If the `skip` parameter
to runtime.Callers skips part-way into a physical frame, there is no
convenient way to encode that in the resulting slice. To avoid changing
the API in an incompatible way, our solution is to store the number of
skipped logical calls of the first frame in the _second_ uintptr
returned by runtime.Callers. Since this number is a small integer, we
encode it as a valid PC value into a small symbol called:
runtime.skipPleaseUseCallersFrames
For example, if f() calls g(), g() calls `runtime.Callers(2, pcs)`, and
g() is inlined into f, then the frame for f will be partially skipped,
resulting in the following slice:
pcs = []uintptr{pc_in_f, runtime.skipPleaseUseCallersFrames+1, ...}
We store the skip PC in pcs[1] instead of pcs[0] so that `pcs[i:]` will
truncate the captured stack trace rather than grow it for all i.
Updates #19348.
Change-Id: I1c56f89ac48c29e6f52a5d085567c6d77d499cf1
Reviewed-on: https://go-review.googlesource.com/37854
Run-TryBot: David Lazar <lazard@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Previously, we could not run tests with -l=4 on NaCl since the buildrun
action is not supported on NaCl. This lets us run tests with build flags
on NaCl.
Change-Id: I103370c7b823b4ff46f47df97e802da0dc2bc7c3
Reviewed-on: https://go-review.googlesource.com/38170
Run-TryBot: David Lazar <lazard@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Gccgo crashed compiling a function that returned multiple zero-sized values.
Change-Id: I499112cc310e4a4f649962f4d2bc9fee95dee1b6
Reviewed-on: https://go-review.googlesource.com/38772
Reviewed-by: Than McIntosh <thanm@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This was cherry-picked to 1.8 as CL 38587, but on master issue was fixed
by CL 37661. Add still relevant part (test) and close issue, since test passes.
Fixes#19201
Change-Id: I6415792e2c465dc6d9bd6583ba1e54b107bcf5cc
Reviewed-on: https://go-review.googlesource.com/37376
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Prior to this CL, Type.Width != 0 was the mark
of a Type whose Width had been calculated.
As a result, dowidth always recalculated
the width of struct{}.
This, combined with the prohibition on calculating
the width of a FuncArgsStruct and the use of
struct{} as a function argument,
meant that there were circumstances in which
it was forbidden to call dowidth on a type.
This inhibits refactoring to call dowidth automatically,
rather than explicitly.
Instead add a helper method, Type.WidthCalculated,
and implement as Type.Align > 0.
Type.Width is not a good candidate for tracking
whether the width has been calculated;
0 is a value type width, and Width is subject to
too much magic value game-playing.
For good measure, add a test for #11354.
Change-Id: Ie9a9fb5d924e7a2010c1904ae5e38ed4a38eaeb2
Reviewed-on: https://go-review.googlesource.com/38468
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Ensure that we have a test for when the compiler
encounters a type switch on a non-interface value.
Change-Id: Icb222f986894d0190e1241ca65396b4950e7d14f
Reviewed-on: https://go-review.googlesource.com/38661
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Avoid construction of incorrect syntax trees in presence of errors.
For #19663.
Change-Id: I43025a3cf0fe02cae9a57e8bb9489b5f628c3fd7
Reviewed-on: https://go-review.googlesource.com/38604
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Simple phi insertion already had a heuristic to check
for dead blocks, namely having no predecessors.
When we stopped generating code for dead blocks,
we eliminated some values contained in more subtle
dead blocks, which confused phi insertion.
Compensate by beefing up the reachability check.
Fixes#19678
Change-Id: I0081e4a46f7ce2f69b131a34a0553874a0cb373e
Reviewed-on: https://go-review.googlesource.com/38602
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
CL 37499 allows inlining more functions by ignoring dead code.
However, that dead code can contain non-exportable constructs.
Teach the exporter not to export dead code.
Fixes#19679
Change-Id: Idb1d3794053514544b6f1035d29262aa6683e1e7
Reviewed-on: https://go-review.googlesource.com/38601
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Almost never happens in practice.
The compiler will generate reasonable code anyway,
since assignments involving [0]T never do any work.
Fixes#19696Fixes#19671
Change-Id: I350d2e0c5bb326c4789c74a046ab0486b2cee49c
Reviewed-on: https://go-review.googlesource.com/38599
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Previously, we handled recursive interfaces by deferring typechecking
of interface methods, while eagerly expanding interface embeddings.
This CL switches to eagerly evaluating interface methods, and
deferring expanding interface embeddings to dowidth. This allows us to
detect recursive interface embeddings with the same mechanism used for
detecting recursive struct embeddings.
Updates #16369.
Change-Id: If4c0320058047f8a2d9b52b9a79de47eb9887f95
Reviewed-on: https://go-review.googlesource.com/38391
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Report syntax error that was missed when moving to new parser.
Fixes#19610.
Change-Id: Ie5625f907a84089dc56fcccfd4f24df546042783
Reviewed-on: https://go-review.googlesource.com/38375
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
See https://go-review.googlesource.com/#/c/38313/ for background.
It turns out that only a few tests checked for this.
The new error message is shorter and very clear.
Change-Id: I8ab4ad59fb023c8b54806339adc23aefd7dc7b07
Reviewed-on: https://go-review.googlesource.com/38314
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Implement math/bits.TrailingZerosX using intrinsics.
Generally reorganize the intrinsic spec a bit.
The instrinsics data structure is now built at init time.
This will make doing the other functions in math/bits easier.
Update sys.CtzX to return int instead of uint{64,32} so it
matches math/bits.TrailingZerosX.
Improve the intrinsics a bit for amd64. We don't need the CMOV
for <64 bit versions.
Update #18616
Change-Id: Ic1c5339c943f961d830ae56f12674d7b29d4ff39
Reviewed-on: https://go-review.googlesource.com/38155
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Interface wrapper functions now get compiled eagerly in some cases.
Consequently, they may be present in multiple translation units.
Mark them as DUPOK, just like closures.
Fixes#19548Fixes#19550
Change-Id: Ibe74adb5a62dbf6447db37fde22dcbb3479969ef
Reviewed-on: https://go-review.googlesource.com/38156
Reviewed-by: David Chase <drchase@google.com>
With this change, code like
h := sha1.New()
h.Write(buf)
sum := h.Sum()
gets compiled into static calls rather than
interface calls, because the compiler is able
to prove that 'h' is really a *sha1.digest.
The InterCall re-write rule hits a few dozen times
during make.bash, and hundreds of times during all.bash.
The most common pattern identified by the compiler
is a constructor like
func New() Interface { return &impl{...} }
where the constructor gets inlined into the caller,
and the result is used immediately. Examples include
{sha1,md5,crc32,crc64,...}.New, base64.NewEncoder,
base64.NewDecoder, errors.New, net.Pipe, and so on.
Some existing benchmarks that change on darwin/amd64:
Crc64/ISO4KB-8 2.67µs ± 1% 2.66µs ± 0% -0.36% (p=0.015 n=10+10)
Crc64/ISO1KB-8 694ns ± 0% 690ns ± 1% -0.59% (p=0.001 n=10+10)
Adler32KB-8 473ns ± 1% 471ns ± 0% -0.39% (p=0.010 n=10+9)
On architectures like amd64, the reduction in code size
appears to contribute more to benchmark improvements than just
removing the indirect call, since that branch gets predicted
accurately when called in a loop.
Updates #19361
Change-Id: I57d4dc21ef40a05ec0fbd55a9bb0eb74cdc67a3d
Reviewed-on: https://go-review.googlesource.com/38139
Run-TryBot: Philip Hofer <phofer@umich.edu>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This reverts commit 4e0c7c3f61.
Reason for revert: The presence-of-optimization test program is fragile, breaks under noopt, and might break if the Go libraries are tweaked. It needs to be (re)written without reference to other packages.
Change-Id: I3aaf1ab006a1a255f961a978e9c984341740e3c7
Reviewed-on: https://go-review.googlesource.com/38097
Reviewed-by: Keith Randall <khr@golang.org>
Move the zeroing of results earlier. In particular, they need to
come before any move-to-heap operations, as those require allocation.
Those allocations are points at which the GC can see the uninitialized
result slots.
For the function:
func f() (x, y, z *int) {
defer(){}()
escape(&y)
return
}
We used to generate code like this:
x = nil
y = nil
&y = new(int)
z = nil
Now we will generate:
x = nil
y = nil
z = nil
&y = new(int)
Since the fix for #18860, the return slots are always live if there
is a defer, so the former ordering allowed the GC to see junk
in the z slot.
Fixes#19078
Change-Id: I71554ae437549725bb79e13b2c100b2911d47ed4
Reviewed-on: https://go-review.googlesource.com/38133
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
With this change, code like
h := sha1.New()
h.Write(buf)
sum := h.Sum()
gets compiled into static calls rather than
interface calls, because the compiler is able
to prove that 'h' is really a *sha1.digest.
The InterCall re-write rule hits a few dozen times
during make.bash, and hundreds of times during all.bash.
The most common pattern identified by the compiler
is a constructor like
func New() Interface { return &impl{...} }
where the constructor gets inlined into the caller,
and the result is used immediately. Examples include
{sha1,md5,crc32,crc64,...}.New, base64.NewEncoder,
base64.NewDecoder, errors.New, net.Pipe, and so on.
Some existing benchmarks that change on darwin/amd64:
Crc64/ISO4KB-8 2.67µs ± 1% 2.66µs ± 0% -0.36% (p=0.015 n=10+10)
Crc64/ISO1KB-8 694ns ± 0% 690ns ± 1% -0.59% (p=0.001 n=10+10)
Adler32KB-8 473ns ± 1% 471ns ± 0% -0.39% (p=0.010 n=10+9)
On architectures like amd64, the reduction in code size
appears to contribute more to benchmark improvements than just
removing the indirect call, since that branch gets predicted
accurately when called in a loop.
Updates #19361
Change-Id: Ia9d30afdd5f6b4d38d38b14b88f308acae8ce7ed
Reviewed-on: https://go-review.googlesource.com/37751
Run-TryBot: Philip Hofer <phofer@umich.edu>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Compiler errors now show the exact line and line byte offset (sometimes
called "column") of where an error occured. For `go tool compile x.go`:
package p
const c int = false
//line foo.go:123
type t intg
reports
x.go:2:7: cannot convert false to type int
foo.go:123[x.go:4:8]: undefined: intg
(Some errors use the "wrong" position for the error message; arguably
the byte offset for the first error should be 15, the position of 'false',
rathen than 7, the position of 'c'. But that is an indepedent issue.)
The byte offset (column) values are measured in bytes; they start at 1,
matching the convention used by editors and IDEs.
Positions modified by //line directives show the line offset only for the
actual source location (in square brackets), not for the "virtual" file and
line number because that code is likely generated and the //line directive
only provides line information.
Because the new format might break existing tools or scripts, printing
of line offsets can be disabled with the new compiler flag -C. We plan
to remove this flag eventually.
Fixes#10324.
Change-Id: I493f5ee6e78457cf7b00025aba6b6e28e50bb740
Reviewed-on: https://go-review.googlesource.com/37970
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
After benchmarking with a compiler modified to have better
spill location, it became clear that this method of checking
was actually faster on (at least) two different architectures
(ppc64 and amd64) and it also provides more timely interruption
of loops.
This change adds a modified FOR loop node "FORUNTIL" that
checks after executing the loop body instead of before (i.e.,
always at least once). This ensures that a pointer past the
end of a slice or array is not made visible to the garbage
collector.
Without the rescheduling checks inserted, the restructured
loop from this change apparently provides a 1% geomean
improvement on PPC64 running the go1 benchmarks; the
improvement on AMD64 is only 0.12%.
Inserting the rescheduling check exposed some peculiar bug
with the ssa test code for s390x; this was updated based on
initial code actually generated for GOARCH=s390x to use
appropriate OpArg, OpAddr, and OpVarDef.
NaCl is disabled in testing.
Change-Id: Ieafaa9a61d2a583ad00968110ef3e7a441abca50
Reviewed-on: https://go-review.googlesource.com/36206
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This commit reworks multiway select statements to use normal control
flow primitives instead of the previous setjmp/longjmp-like behavior.
This simplifies liveness analysis and should prevent issues around
"returns twice" function calls within SSA passes.
test/live.go is updated because liveness analysis's CFG is more
representative of actual control flow. The case bodies are the only
real successors of the selectgo call, but previously the selectsend,
selectrecv, etc. calls were included in the successors list too.
Updates #19331.
Change-Id: I7f879b103a4b85e62fc36a270d812f54c0aa3e83
Reviewed-on: https://go-review.googlesource.com/37661
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
When defining an int const, the compiler tries to cast the RHS
expression to int. The cast may fail for three reasons:
1. expr is an integer constant that overflows int
2. expr is a floating point constant
3. expr is a complex constant, or not a number
In the second case, in order to print a sensible error message, we
must distinguish between a floating point constant that should be
included in the error message and a floating point constant that
cannot be reasonably formatted for inclusion in an error message.
For example, in:
const a int = 1.1
const b int = 1 + 1e-100
a is in the former group, while b is in the latter, since the floating
point value resulting from the evaluation of the rhs of the assignment
(1.00...01) is too long to be fully printed in an error message, and
cannot be shortened without making the error message misleading
(rounding or truncating it would result in a "1", which looks like an
integer constant, and it makes little sense in an error message about
an invalid floating point expression).
To fix this problem, we try to format the float value using fconv
(which is used by the error reporting mechanism to format float
arguments), and then parse the resulting string back to a
big.Float. If the result is an integer, we assume that expr is a float
value that cannot be reasonably be formatted as a string, and we emit
an error message that does not include its string representation.
Also, change the error message for overflows to a more conservative
"integer too large", which does not mention overflows that are only
caused by an internal implementation restriction.
Also, change (*Mpint) SetFloat so that it returns a bool (instead of
0/-1 for success/failure).
Fixes#11371
Change-Id: Ibbc73e2ed2eaf41f07827b0649d0eb637150ecaa
Reviewed-on: https://go-review.googlesource.com/35411
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This reverts commit cb6e0639fb.
The fix is incorrect as it's perfectly fine to refer to an
identifier 'init' inside a function, and 'init' may even be
a variable of function value. Misspelling 'init' in that
context would lead to an incorrect error message.
Reopened#8481.
Change-Id: I49787fdf7738213370ae6f0cab54013e9e3394a8
Reviewed-on: https://go-review.googlesource.com/37876
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
On overloaded machines once we get to big N, the machine slowness dominates.
But we only retry once we get to a big N.
Instead, retry for small N too, and die on the first big N that fails.
Change-Id: I3ab9cfb88832ad86e2ba1389a926045091268aeb
Reviewed-on: https://go-review.googlesource.com/37543
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Match more patterns generated by the compiler where the index for
a bound check is bounded through a AND operation, with different
register sizes.
These rules trigger a dozen of times in a bootstrap.
Change-Id: Ic9fff16f21d08580f19a366c3ee1a372e58357d1
Reviewed-on: https://go-review.googlesource.com/37442
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Without this, literals keep their original source positions through
inlining, which results in strange jumps in line numbers of inlined
function bodies. By copying literals, inlining can update their source
position like other nodes.
Fixes#15453.
Change-Id: Iad5d9bbfe183883794213266dc30e31bab89ee69
Reviewed-on: https://go-review.googlesource.com/37232
Run-TryBot: David Lazar <lazard@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
The builtin runtime package definitions intentionally diverge from the
actual runtime package's, but this only works as long as they never
overlap.
To make it easier to expand the builtin runtime package, this CL now
loads their definitions into a logically separate "go.runtime"
package. By resetting the package's Prefix field to "runtime", any
references to builtin definitions will still resolve against the real
package runtime.
Fixes#14482.
Passes toolstash -cmp.
Change-Id: I539c0994deaed4506a331f38c5b4d6bc8c95433f
Reviewed-on: https://go-review.googlesource.com/37538
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This is the escape analysis analog of CL 37499.
Fixes#12397Fixes#16871
The only "moved to heap" decisions eliminated by this
CL in std+cmd are:
cmd/compile/internal/gc/const.go:1514: moved to heap: ac
cmd/compile/internal/gc/const.go:1515: moved to heap: bd
cmd/compile/internal/gc/const.go:1516: moved to heap: bc
cmd/compile/internal/gc/const.go:1517: moved to heap: ad
cmd/compile/internal/gc/const.go:1546: moved to heap: ac
cmd/compile/internal/gc/const.go:1547: moved to heap: bd
cmd/compile/internal/gc/const.go:1548: moved to heap: bc
cmd/compile/internal/gc/const.go:1549: moved to heap: ad
cmd/compile/internal/gc/const.go:1550: moved to heap: cc_plus
cmd/compile/internal/gc/export.go:162: moved to heap: copy
cmd/compile/internal/gc/mpfloat.go:66: moved to heap: b
cmd/compile/internal/gc/mpfloat.go:97: moved to heap: b
Change-Id: I0d420b69c84a41ba9968c394e8957910bab5edea
Reviewed-on: https://go-review.googlesource.com/37508
Reviewed-by: David Chase <drchase@google.com>
New special case for booleans and byte-sized integer types
converted to interfaces needs to ensure that the operand is
not too complex, if it were to appear in a parameter list
for example.
Added test, also increased the recursive node dump depth to
a level that was actually useful for an actual bug.
Fixes#19275.
Change-Id: If36ac3115edf439e886703f32d149ee0a46eb2a5
Reviewed-on: https://go-review.googlesource.com/37470
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This should help on the openbsd systems where the test mostly passes.
I don't expect it to help on s390x where the test reliably fails.
But it should give more information when it does fail.
For #19276.
Change-Id: I496c291f2b4b0c747b8dd4315477d87d03010059
Reviewed-on: https://go-review.googlesource.com/37348
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
CL 35562 substituted zerobase for the pointer for
interfaces containing zero-sized values.
However, it failed to evaluate the zero-sized value
expression for side-effects. Fix that.
The other similar interface value optimizations
are not affected, because they all actually use the
value one way or another.
Fixes#19246
Change-Id: I1168a99561477c63c29751d5cd04cf81b5ea509d
Reviewed-on: https://go-review.googlesource.com/37395
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The new syntax tree introduced with 1.8 represents send statements
(ch <- x) as statements; the old syntax tree represented them as
expressions (and parsed them as such) but complained if they were
used in expression context. As a consequence, some of the errors
that in the past were of the form "ch <- x used as value" now look
like "unexpected <- ..." because a "<-" is not valid according to
Go syntax in those situations. Accept the new error message.
Also: Fine-tune handling of misformed for loop headers.
Also: Minor cleanups/better comments.
Fixes#17590.
Change-Id: Ia541dea1f2f015c1b21f5b3ae44aacdec60a8aba
Reviewed-on: https://go-review.googlesource.com/37386
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The loop-A-encloses-loop-C code did not properly handle the
case where really C was already known to be enclosed by B,
and A was nearest-outer to B, not C.
Fixes#19217.
Change-Id: I755dd768e823cb707abdc5302fed39c11cdb34d4
Reviewed-on: https://go-review.googlesource.com/37340
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Avoid printing a second error message when a field of an undefined
variable is accessed.
Fixes#8440.
Change-Id: I3fe0b11fa3423cec3871cb01b5951efa8ea7451a
Reviewed-on: https://go-review.googlesource.com/36751
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixes#19012.
Fallback to return signatures without detailed types.
These error message will be of the form of issue:
* https://golang.org/issues/4215
* https://golang.org/issues/6750
So:
func f(x int, y uint) {
return x > y
}
f(10, "a" < 3)
will give errors:
too many errors to return
too many arguments in call to f
instead of:
too many errors to return
have (<T>)
want ()
too many arguments in call to f
have (number, <T>)
want (number, number)
Change-Id: I680abc7cdd8444400e234caddf3ff49c2d69f53d
Reviewed-on: https://go-review.googlesource.com/36806
Reviewed-by: Robert Griesemer <gri@golang.org>
Added a flag to generic and various architectures' atomic
operations that are judged to have observable side effects
and thus cannot be dead-code-eliminated.
Test requires GOMAXPROCS > 1 without preemption in loop.
Fixes#19182.
Change-Id: Id2230031abd2cca0bbb32fd68fc8a58fb912070f
Reviewed-on: https://go-review.googlesource.com/37333
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The rules for folding addresses into load/stores checks sym1 is
not on stack (because the stack offset is not known at that point).
But sym1 could be nil, which invalidates the check. Check merged
sym instead.
Fixes#19137.
Change-Id: I8574da22ced1216bb5850403d8f08ec60a8d1005
Reviewed-on: https://go-review.googlesource.com/37145
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Nil check removal in the same block is disabled due to issue 18725:
because the values are not ordered, a nilcheck may influence a
value that is logically before it. This CL re-enables same-block
nilcheck removal by ordering values in store order first.
Updates #18725.
Change-Id: I287a38525230c14c5412cbcdbc422547dabd54f6
Reviewed-on: https://go-review.googlesource.com/35496
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Until now, the parser set the position for each Node to the position of
the first token belonging to that node. For compatibility with the now
defunct gc parser, in many places that position information was modified
when the gcCompat flag was set (which it was, by default). Furthermore,
in some places, position information was not set at all.
This change removes the gcCompat flag and all associated code, and sets
position information for all nodes in a more principled way, as proposed
by mdempsky (see #16943 for details). Specifically, the position of a
node may not be at the very beginning of the respective production. For
instance for an Operation `a + b`, the position associated with the node
is the position of the `+`. Thus, for `a + b + c` we now get different
positions for the two additions.
This change does not pass toolstash -cmp because position information
recorded in export data and pcline tables is different. There are no
other functional changes.
Added test suite testing the position of all nodes.
Fixes#16943.
Change-Id: I3fc02bf096bc3b3d7d2fa655dfd4714a1a0eb90c
Reviewed-on: https://go-review.googlesource.com/37017
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
CL 35261 introduces special handling of zero-valued STRUCTLIT for
efficient struct zeroing. But it didn't cover all use cases, for
example, CONVNOP STRUCTLIT is not handled.
On the other hand, CL 34566 handles zeroing earlier, so we don't
need the change in CL 35261 for efficient zeroing. Other uses of
zero-valued struct literals are very rare. So undo the change in
walk.go in CL 35261.
Add a test for efficient zeroing.
Fixes#19084.
Change-Id: I0807f7423fb44d47bf325b3c1ce9611a14953853
Reviewed-on: https://go-review.googlesource.com/36955
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Use distinction between explicit and automatically inserted semicolons
to provide a better error message if the condition in an 'if' statement
is missing.
For #18747.
Change-Id: Iac167ae4e5ad53d2dc73f746b4dee9912434bb59
Reviewed-on: https://go-review.googlesource.com/36930
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Added missing nil-check. We will get rid of the gcCompat corrections
shortly but it's still worthwhile having the new test case added.
Fixes#19056.
Change-Id: I35bd938a4d789058da15724e34c05e5e631ecad0
Reviewed-on: https://go-review.googlesource.com/36908
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Add temporaries to reorder the assignment for OAS2XXX nodes.
This makes orderstmt(), rewrite
a, b, c = ...
as
tmp1, tmp2, tmp3 = ...
a, b, c = tmp1, tmp2, tmp3
and
a, ok = ...
as
t1, t2 = ...
a = t1
ok = t2
Fixes#13433.
Change-Id: Id0f5956e3a254d0a6f4b89b5f7b0e055b1f0e21f
Reviewed-on: https://go-review.googlesource.com/34713
Run-TryBot: Dhananjay Nakrani <dhananjayn@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The gcCompat mode was introduced to match the new parser's node position
setup exactly with the positions used by the original parser. Some of the
gcCompat adjustments were required to satisfy syntax error test cases,
and the rest were required to make toolstash cmp pass.
This change removes the former gcCompat adjustments and instead adjusts
the respective test cases as necessary. In some cases this makes the error
lines consistent with the ones reported by gccgo.
Where it has changed, the position associated with a given syntactic construct
is the position (line/col number) of the left-most token belonging to the
construct.
Change-Id: I5b60c00c5999a895c4d6d6e9b383c6405ccf725c
Reviewed-on: https://go-review.googlesource.com/36695
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Starting the error message with "expecting" rather than "missing"
causes the syntax error mechanism to add additional helpful info
(it recognizes "expecting" but not "missing").
Fixes#17328.
Change-Id: I8482ca5e5a6a6b22e0ed0d831b7328e264156334
Reviewed-on: https://go-review.googlesource.com/36637
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Towards better syntax error messages: With this change, the parser knows whether
a semicolon was an actual ';' in the source, or whether it was an automatically
inserted semicolon as result of a '\n' or EOF. Using this information in error
messages makes them more understandable.
For #17328.
Change-Id: I8cd9accee8681b62569d0ecef922d38682b401eb
Reviewed-on: https://go-review.googlesource.com/36636
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The compiler did not emit write barrier for assigning global with
struct literal, like global = T{} where T contains pointer.
The relevant code path is:
walkexpr OAS var_ OSTRUCTLIT
oaslit
anylit OSTRUCTLIT
walkexpr OAS var_ nil
return without adding write barrier
return true
break (without adding write barrier)
This CL makes oaslit not apply to globals. See also CL
https://go-review.googlesource.com/c/36355/ for an alternative
fix.
The downside of this is that it generates static data for zeroing
struct now. Also this only covers global. If there is any lurking
bug with implicit zeroing other than globals, this doesn't fix.
Fixes#18956.
Change-Id: Ibcd27e4fae3aa38390ffa94a32a9dd7a802e4b37
Reviewed-on: https://go-review.googlesource.com/36410
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
For code such as
if a := 10 { ...
the 1.7 compiler reported
a := 10 used as value
while the 1.8 compiler reported
invalid condition, tag, or type switch guard
Changed the error message to match the 1.7 compiler.
Fixes#18915.
Change-Id: I01308862e461922e717f9f8295a9db53d5a914eb
Reviewed-on: https://go-review.googlesource.com/36470
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We shouldn't use CONVNOP for conversions between two different
nonempty interface types, because we want to update the itab
in those situations.
Fixes#18595
After this CL, we are guaranteed that itabs are unique, that is
there is only one itab per compile-time-type/concrete type pair.
See also the tests in CL 35115 and 35116 which make sure this
invariant holds even for shared libraries and plugins.
Unique itabs are required for CL 34810 (faster type switch code).
R=go1.9
Change-Id: Id27d2e01ded706680965e4cb69d7c7a24ac2161b
Reviewed-on: https://go-review.googlesource.com/35119
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This CL fixes two issues:
1. Load ops were initially always lowered to unsigned loads, even
for signed types. This was fine by itself however LoadReg ops
(used to re-load spilled values) were lowered to signed loads
for signed types. This meant that spills could invalidate
optimizations that assumed the original unsigned load.
2. Types were not always being maintained correctly through rules
designed to eliminate unnecessary zero and sign extensions.
Fixes#18906.
Change-Id: I95785dcadba03f7e3e94524677e7d8d3d3b9b737
Reviewed-on: https://go-review.googlesource.com/36256
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
If there is a defer, and that defer recovers, then the caller
can see all of the output parameters. That means that we must
mark all the output parameters live at any point which might panic.
If there is no defer then this is not necessary. This is implemented.
We could also detect whether there is a recover in any of the defers.
If not, we would need to mark only output params that the defer
actually references (and the closure mechanism already does that).
This is not implemented.
Fixes#18860.
Change-Id: If984fe6686eddce9408bf25e725dd17fc16b8578
Reviewed-on: https://go-review.googlesource.com/36030
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
When we discover a relation x <= len(s), also discover the relation
x <= cap(s). That way, in situations like:
a := s[x:] // tests 0 <= x <= len(s)
b := s[:x] // tests 0 <= x <= cap(s)
the second check can be eliminated.
Fixes#16813
Change-Id: Ifc037920b6955e43bac1a1eaf6bac63a89cfbd44
Reviewed-on: https://go-review.googlesource.com/33633
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alexandru Moșoi <alexandru@mosoi.ro>
Reviewed-by: David Chase <drchase@google.com>
CSE opportunities were being missed for commutative ops. We used to
order the args of commutative ops (by arg ID) once at the start of CSE.
But that may not be enough.
i1 = (Load ptr mem)
i2 = (Load ptr mem)
x1 = (Add i1 j)
x2 = (Add i2 j)
Equivalent commutative ops x1 and x2 may not get their args ordered in
the same way because because at the start of CSE, we don't know that
the i values will be CSEd. If x1 and x2 get opposite orders we won't
CSE them.
Instead, (re)order the args of commutative operations by their
equivalence class IDs each time we partition an equivalence class.
Change-Id: Ic609fa83b85299782a5e85bf93dc6023fccf4b0c
Reviewed-on: https://go-review.googlesource.com/33632
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Todd Neal <todd@tneal.org>
Fixes#10561.
Provides a better diagnostic message for failed type switch
satisfaction in the case that a value receiver is being used
in place of the pointer receiver that implements and satisfies
the interface.
Change-Id: If8c13ba13f2a8d81bf44bac7c3a66c12921ba921
Reviewed-on: https://go-review.googlesource.com/35235
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixes#8481.
Inform the user that init functions cannot be directly invoked
in user code, as mandated by the spec at:
http://golang.org/ref/spec#Program_initialization_and_execution.
Change-Id: Ib12c0c08718ffd48b76b6f9b13c76bb6612d2e7b
Reviewed-on: https://go-review.googlesource.com/34790
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixes#15055.
Updates exprfmt printing using fmt verb "%v" to check that n.Left
is non-nil before attempting to print it, otherwise we'll print
the nodes in the list using verb "%.v".
Credit to @mdempsky for this approach and for finding
the root cause of the issue.
Change-Id: I20a6464e916dc70d5565e145164bb9553e5d3865
Reviewed-on: https://go-review.googlesource.com/25361
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Make sure that the lack of an lvalue doesn't
cause extra side-effects.
Updates #18661
Updates #18739
Change-Id: I52eb4b4a5c6f8ff5cddd2115455f853c18112c19
Reviewed-on: https://go-review.googlesource.com/36126
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
When switching to the new parser, I changed cmd/compile to handle iota
per an intuitive interpretation of how nested constant declarations
should work (which also matches go/types).
Note: if we end up deciding that the current spec wording is
intentional (i.e., confirming gccgo's current behavior), the test will
need to be updated to expect 4 instead of 1.
Updates #15550.
Change-Id: I441f5f13209f172b73ef75031f2a9daa5e985277
Reviewed-on: https://go-review.googlesource.com/36122
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Whoever called toint() is expecting the {Mpint, Mpflt, Mpcplx} arg to
be converted to an integer expression, so it never makes sense to
report an error as "constant X truncated to real".
Fixes#11580
Change-Id: Iadcb105f0802358a7f77188c2b1e63fe80c5580c
Reviewed-on: https://go-review.googlesource.com/34638
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
For #18130.
f8b4123613 [dev.typealias] spec: use term 'embedded field' rather than 'anonymous field'
9ecc3ee252 [dev.typealias] cmd/compile: avoid false positive cycles from type aliases
49b7af8a30 [dev.typealias] reflect: add test for type aliases
9bbb07ddec [dev.typealias] cmd/compile, reflect: fix struct field names for embedded byte, rune
43c7094386 [dev.typealias] reflect: fix StructOf use of StructField to match StructField docs
9657e0b077 [dev.typealias] cmd/doc: update for type alias
de2e5459ae [dev.typealias] cmd/compile: declare methods after resolving receiver type
9259f3073a [dev.typealias] test: match gccgo error messages on alias2.go
5d92916770 [dev.typealias] cmd/compile: change Func.Shortname to *Sym
a7c884efc1 [dev.typealias] go/internal/gccgoimporter: support for type aliases
5802cfd900 [dev.typealias] cmd/compile: export/import test cases for type aliases
d7cabd40dd [dev.typealias] go/types: clarified doc string
cc2dcce3d7 [dev.typealias] cmd/compile: a few better comments related to alias types
5c160b28ba [dev.typealias] cmd/compile: improved error message for cyles involving type aliases
b2386dffa1 [dev.typealias] cmd/compile: type-check type alias declarations
ac8421f9a5 [dev.typealias] cmd/compile: various minor cleanups
f011e0c6c3 [dev.typealias] cmd/compile, go/types, go/importer: various alias related fixes
49de5f0351 [dev.typealias] cmd/compile, go/importer: define export format and implement importing of type aliases
5ceec42dc0 [dev.typealias] go/types: export TypeName.IsAlias so clients can use it
aa1f0681bc [dev.typealias] go/types: improved Object printing
c80748e389 [dev.typealias] go/types: remove some more vestiges of prior alias implementation
80d8b69e95 [dev.typealias] go/types: implement type aliases
a917097b5e [dev.typealias] go/build: add go1.9 build tag
3e11940437 [dev.typealias] cmd/compile: recognize type aliases but complain for now (not yet supported)
e0a05c274a [dev.typealias] cmd/gofmt: added test cases for alias type declarations
2e5116bd99 [dev.typealias] go/ast, go/parser, go/printer, go/types: initial type alias support
Change-Id: Ia65f2e011fd7195f18e1dce67d4d49b80a261203
When nilcheck runs, the values in a block are not in any particular
order. So any facts derived from examining the blocks shouldn't be
used until we reach the next block.
This is suboptimal as it won't eliminate nil checks within a block.
But it's probably a better fix for now as it is a much smaller change
than other strategies for fixing this bug.
nilptr3.go changes are mostly because for this pattern:
_ = *p
_ = *p
either nil check is fine to keep, and this CL changes which one
the compiler tends to keep.
There are a few regressions from code like this:
_ = *p
f()
_ = *p
For this pattern, after this CL we issue 2 nil checks instead of one.
(For the curious, this happens because intra-block nil check
elimination now falls to CSE, not nilcheck proper. The former
pattern has two nil checks with the same store argument. The latter
pattern has two nil checks with different store arguments.)
Fixes#18725
Change-Id: I3721b494c8bc9ba1142dc5c4361ea55c66920ac8
Reviewed-on: https://go-review.googlesource.com/35485
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Plus a few minor changes.
For #18130.
Change-Id: Ica6503fe9c888cc05c15b46178423f620c087491
Reviewed-on: https://go-review.googlesource.com/35233
Reviewed-by: Alan Donovan <adonovan@google.com>
Known issues:
- needs many more tests
- duplicate method declarations via type alias names are not detected
- type alias cycle error messages need to be improved
- need to review setup of byte/rune type aliases
For #18130.
Change-Id: Icc2fefad6214e5e56539a9dcb3fe537bf58029f8
Reviewed-on: https://go-review.googlesource.com/35121
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The test is inherently racy and vulnerable to starvation,
and within all.bash on some platforms that means it flakes.
Test is kept because it can be useful standalone to verify
behavior of GOEXPERIMENT=preeemptibleloops, and there is
likely to be further development of this feature in the
future.
There's also some question as to why it is flaking, because
though technically this is permitted, it's very odd in this
simple case.
Fixes#18589.
Change-Id: Ia0dd9037285c4a03122da4012c96981c9cc43b60
Reviewed-on: https://go-review.googlesource.com/35051
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Loop breaking with a counter. Benchmarked (see comments),
eyeball checked for sanity on popular loops. This code
ought to handle loops in general, and properly inserts phi
functions in cases where the earlier version might not have.
Includes test, plus modifications to test/run.go to deal with
timeout and killing looping test. Tests broken by the addition
of extra code (branch frequency and live vars) for added
checks turn the check insertion off.
If GOEXPERIMENT=preemptibleloops, the compiler inserts reschedule
checks on every backedge of every reducible loop. Alternately,
specifying GO_GCFLAGS=-d=ssa/insert_resched_checks/on will
enable it for a single compilation, but because the core Go
libraries contain some loops that may run long, this is less
likely to have the desired effect.
This is intended as a tool to help in the study and diagnosis
of GC and other latency problems, now that goal STW GC latency
is on the order of 100 microseconds or less.
Updates #17831.
Updates #10958.
Change-Id: I6206c163a5b0248e3f21eb4fc65f73a179e1f639
Reviewed-on: https://go-review.googlesource.com/33910
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
CALLPART of STRUCTLIT did not check for incomplete initialization
of struct; modify PTRLIT treatment to force zeroing.
Test for structlit, believe this might have also failed for
arraylit.
Fixes#18410.
Change-Id: I511abf8ef850e300996d40568944665714efe1fc
Reviewed-on: https://go-review.googlesource.com/34622
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Fixes#18392.
Avoid nil dereferencing n.Right when dealing with non-existent
self referenced interface methods e.g.
type A interface{
Fn(A.Fn)
}
Instead, infer the symbol name from n.Sym itself.
Change-Id: I60d5f8988e7318693e5c8da031285d8d7347b771
Reviewed-on: https://go-review.googlesource.com/34817
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Fixes#6772.
Lock-in test for invalid range loop: repeated variables in range declaration.
Change-Id: I37dd8b1cd7279abe7810deaf8a5d485c5c3b73ca
Reviewed-on: https://go-review.googlesource.com/34714
Reviewed-by: Keith Randall <khr@golang.org>
Fixes#5790.
Fixes#18421.
* Lock in _ = x1/x2 divide by zero runtime panics since
it is actually evaluated and not discarded as in previous
versions before Go1.8.
* Update a test that was skipping over zerodivide tests
that expected runtime panics, enabling us to check for
the expected panics.
Change-Id: I0af0a6ecc19345fa9763ab2e35b275fb2d9d0194
Reviewed-on: https://go-review.googlesource.com/34712
Reviewed-by: Keith Randall <khr@golang.org>
Change-Id: I00c97c36e8fdc79582eaed21877e4c8f44568666
Reviewed-on: https://go-review.googlesource.com/34316
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
- make the scanner unconditionally gc compatible
- consistently use "invalid" instead "illegal" in errors
Reviewed in and cherry-picked from https://go-review.googlesource.com/#/c/33896/.
Change-Id: I4c4253e7392f3311b0d838bbe503576c9469b203
Reviewed-on: https://go-review.googlesource.com/34237
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This was a regression from 1.7. See the issue for details.
Fixes#18149.
Change-Id: Ic8f5a35d14edf9254b1275400316cff7aff32a27
Reviewed-on: https://go-review.googlesource.com/33799
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This fixes a bug in -l=3 or higher.
To inline a variadic function, the compiler generates code that constructs
a slice of arguments for the variadic parameter. Consider the function
func Foo(xs ...string)
and the call Foo("hello", "world"). To inline the call to Foo, the
compiler used to generate
xs := [2]string{"hello", "world"}[:]
which doesn't type check:
invalid operation [2]string literal[:] (slice of unaddressable value).
Now, the compiler generates
xs := []string{"hello", "world"}
which does type check.
Fixes#18116.
Change-Id: I0ee531ef2e6cc276db6fb12602b25a46d6d5db21
Reviewed-on: https://go-review.googlesource.com/33671
Reviewed-by: Keith Randall <khr@golang.org>
It was supposed to be testing SSA, not amd64.
For #18024
Change-Id: Ibe65d7eb6bed9bc4b3eda68e1eaec5fa39fe8f76
Reviewed-on: https://go-review.googlesource.com/33491
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
The table of rewrites in ssa/cse is not sized appropriately for
ssa IDs that are created during copying of selects into new blocks.
Fixes#17918
Change-Id: I65fe86c6aab5efa679aa473aadc4ee6ea882cd41
Reviewed-on: https://go-review.googlesource.com/33240
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The tree is inconsistent about single l vs double l in those
words in documentation, test messages, and one error value text.
$ git grep -E '[Mm]arshall(|s|er|ers|ed|ing)' | wc -l
42
$ git grep -E '[Mm]arshal(|s|er|ers|ed|ing)' | wc -l
1694
Make it consistently a single l, per earlier decisions. This means
contributors won't be confused by misleading precedence, and it helps
consistency.
Change the spelling in one error value text in newRawAttributes of
crypto/x509 package to be consistent.
This change was generated with:
perl -i -npe 's,([Mm]arshal)l(|s|er|ers|ed|ing),$1$2,' $(git grep -l -E '[Mm]arshall' | grep -v AUTHORS | grep -v CONTRIBUTORS)
Updates #12431.
Follows https://golang.org/cl/14150.
Change-Id: I85d28a2d7692862ccb02d6a09f5d18538b6049a2
Reviewed-on: https://go-review.googlesource.com/33017
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
ppc64le supports both internal and external linking so I don't
think there is any reason for it to skip this test.
Change-Id: I05c80cc25909c0364f0a1fb7d20766b011ea1ebb
Reviewed-on: https://go-review.googlesource.com/32854
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reason: Decision to back out current alias implementation.
Leaving import/export related code in place for now.
For #16339.
TBR=mdempsky
Change-Id: Ib0897cab2c1c3dc8a541f2efb9893271b0b0efe2
Reviewed-on: https://go-review.googlesource.com/32757
Reviewed-by: Robert Griesemer <gri@golang.org>
Use a separate symbol for reflect metadata for types with Noalg set.
Fixes#17752.
Change-Id: Icb6cade7e3004fc4108f67df61105dc4085cd7e2
Reviewed-on: https://go-review.googlesource.com/32679
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
when compiling f(a, b, c), we do something like:
*(SP+0) = eval(a)
*(SP+8) = eval(b)
*(SP+16) = eval(c)
call f
If one of those evaluations is later determined to unconditionally panic
(say eval(b) in this example), then the call is deadcode eliminated. But
any previous argument write (*(SP+0)=... here) is still around. Becuase
we only compute the size of the outarg area for calls which are still
around at the end of optimization, the space needed for *(SP+0)=v is not
accounted for and thus the outarg area may be too small.
The fix is to make sure that we evaluate any potentially panicing
operation before we write any of the args to the stack. It turns out
that fix is pretty easy, as we already have such a mechanism available
for function args. We just need to extend it to possibly panicing args
as well.
The resulting code (if b and c can panic, but a can't) is:
tmpb = eval(b)
*(SP+16) = eval(c)
*(SP+0) = eval(a)
*(SP+8) = tmpb
call f
This change tickled a bug in how we find the arguments for intrinsic
calls, so that latent bug is fixed up as well.
Update #16760.
Change-Id: I0bf5edf370220f82bc036cf2085ecc24f356d166
Reviewed-on: https://go-review.googlesource.com/32551
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The code to do the conversion is smaller than the
call to the runtime.
The 1-result asserts need to call panic if they fail, but that
code is out of line.
The only conversions left in the runtime are those which
might allocate and those which might need to generate an itab.
Given the following types:
type E interface{}
type I interface { foo() }
type I2 iterface { foo(); bar() }
type Big [10]int
func (b Big) foo() { ... }
This CL inlines the following conversions:
was assertE2T
var e E = ...
b := i.(Big)
was assertE2T2
var e E = ...
b, ok := i.(Big)
was assertI2T
var i I = ...
b := i.(Big)
was assertI2T2
var i I = ...
b, ok := i.(Big)
was assertI2E
var i I = ...
e := i.(E)
was assertI2E2
var i I = ...
e, ok := i.(E)
These are the remaining runtime calls:
convT2E:
var b Big = ...
var e E = b
convT2I:
var b Big = ...
var i I = b
convI2I:
var i2 I2 = ...
var i I = i2
assertE2I:
var e E = ...
i := e.(I)
assertE2I2:
var e E = ...
i, ok := e.(I)
assertI2I:
var i I = ...
i2 := i.(I2)
assertI2I2:
var i I = ...
i2, ok := i.(I2)
Fixes#17405Fixes#8422
Change-Id: Ida2367bf8ce3cd2c6bb599a1814f1d275afabe21
Reviewed-on: https://go-review.googlesource.com/32313
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
We generate an OpKeepAlive for the idata portion of the interface
for a runtime.KeepAlive call. But given such an op, we need to keep
the entire containing variable alive, not just the range that was
passed to the OpKeepAlive operation.
Fixes#17710
Change-Id: I90de66ec8065e22fb09bcf9722999ddda289ae6e
Reviewed-on: https://go-review.googlesource.com/32477
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
typecheckcomplit nils out node's type, upon finding new errors.
This hides new errors in children's node as well as the type info
of current node. This change fixes that.
Fixes#17645.
Change-Id: Ib473291f31c7e8fa0307cb1d494e0c112ddd3583
Reviewed-on: https://go-review.googlesource.com/32324
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Previously, on encountering Func.Nname.Type == nil, typecheckfunc()
returned without initializing Decldepth for that func. This causes
typecheckclosure() to fatal. This change ensures that we initialize
Decldepth in all cases.
Fixes#17588.
Change-Id: I2e3c81ad52e8383395025388989e8dbf03438b68
Reviewed-on: https://go-review.googlesource.com/32415
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is an extension of
https://go-review.googlesource.com/c/31662/
to mark all the temporaries, not just the ssa-generated ones.
Before-and-after ls -l `go tool -n compile` shows a 3%
reduction in size (or rather, a prior 3% inflation for
failing to filter temps out properly.)
Replaced name-dependent "is it a temp?" tests with calls to
*Node.IsAutoTmp(), which depends on AutoTemp. Also replace
calls to istemp(n) with n.IsAutoTmp(), to reduce duplication
and clean up function name space. Generated temporaries
now come with a "." prefix to avoid (apparently harmless)
clashes with legal Go variable names.
Fixes#17644.
Fixes#17240.
Change-Id: If1417f29c79a7275d7303ddf859b51472890fd43
Reviewed-on: https://go-review.googlesource.com/32255
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Improves the error message by moving the field name before the body
of a struct, in the error message for unknown fields for structs.
* Exhibit:
Given program:
package main
import "time"
func main() {
_ = struct {
about string
before map[string]uint
update map[string]int
updateTime time.Time
expect map[string]int
}{
about: "this one",
updates: map[string]int{"gopher": 10},
}
}
* Before:
./issue17631.go:20: unknown struct { about string; before map[string]uint;
update map[string]int; updateTime time.Time; expect map[string]int } field
'updates' in struct literal
* After:
./issue17631.go:20: unknown field 'updates' in struct literal of type { about string;
before map[string]uint; update map[string]int; updateTime time.Time;
expect map[string]int }
Fixes#17631
Change-Id: I76842616411b931b5ad7a76bd42860dfde7739f4
Reviewed-on: https://go-review.googlesource.com/32240
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Change-Id: Iec35f9b62982da40de400397bc456149216303dc
Reviewed-on: https://go-review.googlesource.com/32297
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Use "have" and "want" and multiple lines like other similar error
messages. Also, fix handling of ... and multi-value function calls.
Fixes#17650.
Change-Id: I4850e79c080eac8df3b92a4accf9e470dff63c9a
Reviewed-on: https://go-review.googlesource.com/32261
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
- removes the runtime function stringtoslicebytetmp
- removes the generation of calls to stringtoslicebytetmp from the frontend
- adds handling of OSTRARRAYBYTETMP in the backend
This reduces binary sizes and avoids function call overhead.
Change-Id: Ib9988d48549cee663b685b4897a483f94727b940
Reviewed-on: https://go-review.googlesource.com/32158
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Martin Möhrmann <martisch@uos.de>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When we do
var x []byte = ...
y := x[i:]
We can't just use y.ptr = x.ptr + i, as the new pointer may point to the
next object in memory after the backing array.
We used to fix this by doing:
y.cap = x.cap - i
delta := i
if y.cap == 0 {
delta = 0
}
y.ptr = x.ptr + delta
That generates a branch in what is otherwise straight-line code.
Better to do:
y.cap = x.cap - i
mask := (y.cap - 1) >> 63 // -1 if y.cap==0, 0 otherwise
y.ptr = x.ptr + i &^ mask
It's about the same number of instructions (~4, depending on what
parts are constant, and the target architecture), but it is all
inline. It plays nicely with CSE, and the mask can be computed
in parallel with the index (in cases where a multiply is required).
It is a minor win in both speed and space.
Change-Id: Ied60465a0b8abb683c02208402e5bb7ac0e8370f
Reviewed-on: https://go-review.googlesource.com/32022
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This CL completes support for alias declarations in the compiler.
Also:
- increased export format version
- updated various comments
For #16339.
Fixes#17487.
Change-Id: Ic6945fc44c0041771eaf9dcfe973f601d14de069
Reviewed-on: https://go-review.googlesource.com/32090
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Fixes a bug where assignments that should come after a call
were instead being issued before the call.
Fixes#17596Fixes#17618
Change-Id: Ic9ae4c34ae38fc4ccd0604b65345b05896a2c295
Reviewed-on: https://go-review.googlesource.com/32226
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Sometimes neither the src nor the dst of an escape edge
contains the line number appropriate to the edge, so add
a field so that can be set correctly.
Also updated some of the explanations to be less jargon-y
and perhaps more informative, and folded bug example into
test.
Cleaned up some of the function/method names in esc.go
and did a quick sanity check that each "bundling" function
was actually called often enough to justify its existence.
Fixes#17459.
Change-Id: Ieba53ab0a6ba1f7a6c4962bc0b702ede9cc3a3cc
Reviewed-on: https://go-review.googlesource.com/31660
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
When the compiler insert write barriers, the frontend makes
conservative decisions at an early stage. This may have false
positives which result in write barriers for stack writes.
A new phase, writebarrier, is added to the SSA backend, to delay
the decision and eliminate false positives. The frontend still
makes conservative decisions. When building SSA, instead of
emitting runtime calls directly, it emits WB ops (StoreWB,
MoveWB, etc.), which will be expanded to branches and runtime
calls in writebarrier phase. Writes to static locations on stack
are detected and write barriers are removed.
All write barriers of stack writes found by the script from
issue #17330 are eliminated (except two false positives).
Fixes#17330.
Change-Id: I9bd66333da9d0ceb64dcaa3c6f33502798d1a0f8
Reviewed-on: https://go-review.googlesource.com/31131
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
The runtime traceback code assumes non-empty frame has link
link register saved on LR architectures. Make sure it is so in
the assember.
Also make sure that LR is stored before update SP, so the traceback
code will not see a half-updated stack frame if a signal comes
during the execution of function prologue.
Fixes#17381.
Change-Id: I668b04501999b7f9b080275a2d1f8a57029cbbb3
Reviewed-on: https://go-review.googlesource.com/31760
Reviewed-by: Michael Munday <munday@ca.ibm.com>
Bug 15141 was apparently fixed by some other change to the
compiler (this is plausible, it was a weird bug dependent
on a particular way of returning a large named array result),
add the test to ensure that it stays fixed.
Updates #15141.
Change-Id: I3d6937556413fab1af31c5a1940e6931563ce2f3
Reviewed-on: https://go-review.googlesource.com/31972
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It appears to be a vestigial holding ground for bugs.
But we have an issue tracker, and #1909 is there and open.
Change-Id: I912ff222a24c51fab483be0c67dad534f5a84488
Reviewed-on: https://go-review.googlesource.com/31859
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Previously, the check to make sure we only considered constant cases
for duplicates was skipping past integer ranges, because those use
n.List instead of n.Left. Thanks to Emmanuel Odeke for investigating
and helping to identify the root cause.
Fixes#17517.
Change-Id: I46fcda8ed9c346ff3a9647d50b83f1555587b740
Reviewed-on: https://go-review.googlesource.com/31716
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Adapt old test for prove's bounds check elimination.
Added missing rule to generic rules that lead to differences
between 32 and 64 bit platforms on sliceopt test.
Added debugging to prove.go that was helpful-to-necessary to
discover that missing rule.
Lowered debugging level on prove.go from 3 to 1; no idea
why it was previously 3.
Change-Id: I09de206aeb2fced9f2796efe2bfd4a59927eda0c
Reviewed-on: https://go-review.googlesource.com/23290
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reuse the same mechanisms for handling universal builtins like len to
handle unsafe.Sizeof, etc. Allows us to drop package unsafe's export
data, and simplifies some code.
Updates #17508.
Change-Id: I620e0617c24e57e8a2d7cccd0e2de34608779656
Reviewed-on: https://go-review.googlesource.com/31433
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
instrumentnode() accidentally copies parent's already-instrumented nodes
into child's Ninit block. This generates repeated code in race-instrumentation.
This case surfaces only when it duplicates inline-labels, because of
compile time error. In other cases, it silently generates incorrect
instrumented code. This change prevents it from doing so.
Fixes#17449.
Change-Id: Icddf2198990442166307e176b7e20aa0cf6c171c
Reviewed-on: https://go-review.googlesource.com/31317
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
getArgInfo for reflect.makeFuncStub and reflect.methodValueCall is
necessarily special. These have dynamically determined argument maps
that are stored in their context (that is, their *funcval). These
functions are written to store this context at 0(SP) when called, and
getArgInfo retrieves it from there.
This technique works if getArgInfo is passed an active call frame for
one of these functions. However, getArgInfo is also used in
tracebackdefers, where the "call" is not a true call with an active
stack frame, but a deferred call. In this situation, getArgInfo
currently crashes because tracebackdefers passes a frame with sp set
to 0. However, the entire approach used by getArgInfo is flawed in
this situation because the wrapper has not actually executed, and
hence hasn't saved this metadata to any stack frame.
In the defer case, we know the *funcval from the _defer itself, so we
can fix this by teaching getArgInfo to use the *funcval context
directly when its available, and otherwise get it from the active call
frame.
While we're here, this commit simplifies getArgInfo a bit by making it
play more nicely with the type system. Rather than decoding the
*reflect.methodValue that is the wrapper's context as a *[2]uintptr,
just write out a copy of the reflect.methodValue type in the runtime.
Fixes#16331. Fixes#17471.
Change-Id: I81db4d985179b4a81c68c490cceeccbfc675456a
Reviewed-on: https://go-review.googlesource.com/31138
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The error check patterns in this test are more complex than necessary
because f2 gets inlined into f1. This behavior isn't important to the
test, so disable inlining of f2 and simplify the error check patterns.
Change-Id: Ia8aee92a52f9217ad71b89b2931494047e8d2185
Reviewed-on: https://go-review.googlesource.com/31132
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This adds a //go:notinheap pragma for declarations of types that must
not be heap allocated. We ensure these rules by disallowing new(T),
make([]T), append([]T), or implicit allocation of T, by disallowing
conversions to notinheap types, and by propagating notinheap to any
struct or array that contains notinheap elements.
The utility of this pragma is that we can eliminate write barriers for
writes to pointers to go:notinheap types, since the write barrier is
guaranteed to be a no-op. This will let us mark several scheduler and
memory allocator structures as go:notinheap, which will let us
disallow write barriers in the scheduler and memory allocator much
more thoroughly and also eliminate some problematic hybrid write
barriers.
This also makes go:nowritebarrierrec and go:yeswritebarrierrec much
more powerful. Currently we use go:nowritebarrier all over the place,
but it's almost never what you actually want: when write barriers are
illegal, they're typically illegal for a whole dynamic scope. Partly
this is because go:nowritebarrier has been around longer, but it's
also because go:nowritebarrierrec couldn't be used in situations that
had no-op write barriers or where some nested scope did allow write
barriers. go:notinheap eliminates many no-op write barriers and
go:yeswritebarrierrec makes it possible to opt back in to write
barriers, so these two changes will let us use go:nowritebarrierrec
far more liberally.
This updates #13386, which is about controlling pointers from non-GC'd
memory to GC'd memory. That would require some additional pragma (or
pragmas), but could build on this pragma.
Change-Id: I6314f8f4181535dd166887c9ec239977b54940bd
Reviewed-on: https://go-review.googlesource.com/30939
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This pragma cancels the effect of go:nowritebarrierrec. This is useful
in the scheduler because there are places where we enter a function
without a valid P (and hence cannot have write barriers), but then
obtain a P. This allows us to annotate the function with
go:nowritebarrierrec and split out the part after we've obtained a P
into a go:yeswritebarrierrec function.
Change-Id: Ic8ce4b6d3c074a1ecd8280ad90eaf39f0ffbcc2a
Reviewed-on: https://go-review.googlesource.com/30938
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
"abc"[1] is not like 'b', in that -"abc"[1] is uint8 math, not ideal constant math.
Delay the constantification until after ideal constant folding is over.
Fixes#11370.
Change-Id: Iba2fc00ca2455959e7bab8f4b8b4aac14b1f9858
Reviewed-on: https://go-review.googlesource.com/15740
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
To compile:
m[k] = v
instead of:
mapassign(maptype, m, &k, &v), do
do:
*mapassign(maptype, m, &k) = v
mapassign returns a pointer to the value slot in the map. It is just
like mapaccess except that it will allocate a new slot if k is not
already present in the map.
This makes map accesses faster but potentially larger (codewise).
It is faster because the write into the map is done when the compiler
knows the concrete type, so it can be done with a few store
instructions instead of calling typedmemmove. We also potentially
avoid stack temporaries to hold v.
The code can be larger when the map has pointers in its value type,
since there is a write barrier call in addition to the mapassign call.
That makes the code at the callsite a bit bigger (go binary is 0.3%
bigger).
This CL is in preparation for doing operations like m[k] += v with
only a single runtime call. That will roughly double the speed of
such operations.
Update #17133
Update #5147
Change-Id: Ia435f032090a2ed905dac9234e693972fe8c2dc5
Reviewed-on: https://go-review.googlesource.com/30815
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In some cases the members of the root set from which flood
runs themselves escape, without their referents being also
tagged as escaping. Fix this by reflooding from those roots
whose escape increases, and also enhance the "leak" test to
include reachability from a heap-escaped root.
Fixes#17318.
Change-Id: Ied1e75cee17ede8ca72a8b9302ce8201641ec593
Reviewed-on: https://go-review.googlesource.com/30693
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This is a followup to issue #13805. That change avoid leaks for types that
don't have any pointers for the single assignment form of a dottype expression.
This does the same for the double assignment form.
Fixes#15796
Change-Id: I27474cade0ff1f3025cb6392f47b87b33542bc0f
Reviewed-on: https://go-review.googlesource.com/24906
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
With this change, the code in bug #15609 compiles and runs properly:
0000000000401070 <main.jump>:
401070: ff 15 aa 7e 06 00 callq *0x67eaa(%rip) # 468f20 <main.pointer>
401076: c3 retq
0000000000468f20 g O .rodata 0000000000000008 main.pointer
Fixes#15609
Change-Id: Iebb4d5a9f9fff335b693f4efcc97882fe04eefd7
Reviewed-on: https://go-review.googlesource.com/22950
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
It tests the behavior of the old deleted compiler.
Fixes#17362.
Change-Id: Ia2fdec734c5cbe724a9de562ed71598f67244ab3
Reviewed-on: https://go-review.googlesource.com/30593
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Fold MOVDaddr ops into MOVXstorezero ops.
Also fold ADDconst into MOVDaddr so we're sure there isn't
(MOVDstorezero (ADDconst (MOVDaddr ..)))
Without this CL, we get:
v1 = MOVDaddr {s}
v2 = VARDEF {s}
v3 = MOVDstorezero v1 v2
The liveness pass thinks the MOVDaddr is a read of s, so s is
incorrectly thought to be live at the start of the function.
Fixes#17194
Change-Id: I2b4a2f13b12aa5b072941ee1c7b89f3793650cdc
Reviewed-on: https://go-review.googlesource.com/30086
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Michael Munday <munday@ca.ibm.com>
Update gc liveness to remove special conservative treatment
of ambiguously live vars, since there is no longer a need to
protect against GCDEBUG=gcdead.
Change-Id: Id6e2d03218f7d67911e8436d283005a124e6957f
Reviewed-on: https://go-review.googlesource.com/24896
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Fixes#4215.
Fixes#6750.
Improves the error message for wrong number of arguments by comparing
the signature of the return call site arguments, versus the function's
expected return arguments.
In this CL, the signature representation of:
+ ideal numbers(TIDEAL) ie float*, complex*, rune, int is
"number" instead of "untyped number".
+ idealstring is "string" instead of "untyped string".
+ idealbool is "bool" instead of "untyped bool".
However, the representation of other types remains as the compiler
would produce.
* Example 1(in the error messages, if all lines were printed):
$ cat main.go && go run main.go
package main
func foo() (int, int) {
return 2.3
}
func foo2() {
return int(2), 2
}
func foo3(v int) (a, b, c, d int) {
if v >= 5 {
return 1
}
return 2, 3
}
func foo4(name string) (string, int) {
switch name {
case "cow":
return "moo"
case "dog":
return "dog", 10, true
case "fish":
return ""
default:
return "lizard", 10
}
}
type S int
type T string
type U float64
func foo5() (S, T, U) {
if false {
return ""
} else {
ptr := new(T)
return ptr
}
return new(S), 12.34, 1 + 0i, 'r', true
}
func foo6() (T, string) {
return "T"
}
./issue4215.go:4: not enough arguments to return, got (number) want (int, int)
./issue4215.go:8: too many arguments to return, got (int, number) want ()
./issue4215.go:13: not enough arguments to return, got (number) want (int, int, int, int)
./issue4215.go:15: not enough arguments to return, got (number, number) want (int, int, int, int)
./issue4215.go:21: not enough arguments to return, got (string) want (string, int)
./issue4215.go:23: too many arguments to return, got (string, number, bool) want (string, int)
./issue4215.go:25: not enough arguments to return, got (string) want (string, int)
./issue4215.go:37: not enough arguments to return, got (string) want (S, T, U)
./issue4215.go:40: not enough arguments to return, got (*T) want (S, T, U)
./issue4215.go:42: too many arguments to return, got (*S, number, number, number, bool) want (S, T, U)
./issue4215.go:46: not enough arguments to return, got (string) want (T, string)
./issue4215.go:46: too many errors
* Example 2:
$ cat 6750.go && go run 6750.go
package main
import "fmt"
func printmany(nums ...int) {
for i, n := range nums {
fmt.Printf("%d: %d\n", i, n)
}
fmt.Printf("\n")
}
func main() {
printmany(1, 2, 3)
printmany([]int{1, 2, 3}...)
printmany(1, "abc", []int{2, 3}...)
}
./issue6750.go:15: too many arguments in call to printmany, got (number, string, []int) want (...int)
Change-Id: I6fdce78553ae81770840070e2c975d3e3c83d5d8
Reviewed-on: https://go-review.googlesource.com/25156
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Mark nil check operations as faulting if their arg is zero.
This lets the late nilcheck pass remove duplicates.
Fixes#17242.
Change-Id: I4c9938d8a5a1e43edd85b4a66f0b34004860bcd9
Reviewed-on: https://go-review.googlesource.com/29952
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
When processing a fallthrough, the casebody function in swt.go
checks that the last statement has indeed Op == OXFALL (not-processed
fallthrough) before setting it to OFALL (processed fallthrough).
Unfortunately, sometimes the fallthrough statement won't be in the
last node. For example, in
case 0:
return func() int {return 1}()
fallthrough
the compiler generates
autotmp_0 = (func literal)(); return autotmp_0; fallthrough; <node VARKILL>
with an OVARKILL node in the last position. casebody will find that
last.Op != OXFALL, won't mark the fallthrough as processed, and the
fallthrough line will cause a "fallthrough statement out of place" error.
To fix this, we change casebody so that it searches for the fallthrough
statement backwards in the statements list, without assuming that it'll
be in the last position.
Fixes#13262
Change-Id: I366c6caa7fd7442d365bd7a08cc66a552212d9b2
Reviewed-on: https://go-review.googlesource.com/22921
Run-TryBot: Quentin Smith <quentin@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Quentin Smith <quentin@golang.org>
Also adds the 'find leftmost one' instruction (FLOGR) and replaces the
WORD-encoded use of FLOGR in math/big with it.
Change-Id: I18e7cd19e75b8501a6ae8bd925471f7e37ded206
Reviewed-on: https://go-review.googlesource.com/29372
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We're dropping this behavior in favor of runtime.KeepAlive.
Implement runtime.KeepAlive as an intrinsic.
Update #15843
Change-Id: Ib60225bd30d6770ece1c3c7d1339a06aa25b1cbc
Reviewed-on: https://go-review.googlesource.com/28310
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
No point in calling a function when we can build the interface
using a known type (or itab) and the address of a local.
Get rid of third arg (preallocated stack space) to convT2{I,E}.
Makes go binary smaller by 0.2%
benchmark old ns/op new ns/op delta
BenchmarkEfaceInteger-8 16.7 10.1 -39.52%
Update #17118
Update #15375
Change-Id: I9724a1f802bfa1e3957bf1856b55558278e198a2
Reviewed-on: https://go-review.googlesource.com/29373
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The compiler incorrectly will error when comparing a nil pointer
interface to a nil pointer of any other type. Example:
(*int)(nil) == interface{}(nil)
Will error with "gc: illegal constant expression: *int == interface {}"
Fixes#16702
Change-Id: I1a15d651df2cfca6762b1783a28b377b2e6ff8c6
Reviewed-on: https://go-review.googlesource.com/27591
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
ppc64 has an extraneous variable live in some situations.
We need a better tighten pass to get rid of this extra variable.
I'm working on it, but fix the test in the meantime.
Fixes build for ppc64.
Change-Id: I1efb9ccb234a64f2a1c228abd2b3195f67fbeb41
Reviewed-on: https://go-review.googlesource.com/29353
Reviewed-by: David Chase <drchase@google.com>
Unroll s == "ab" to
len(s) == 2 && s[0] == 'a' && s[1] == 'b'
This generates faster and shorter code
by avoiding a runtime call.
Do something similar for !=.
The cutoff length is 6. This was chosen empirically
by examining binary sizes on arm, arm64, 386, and amd64
using the SSA backend.
For all architectures examined, 4, 5, and 6 were
the ideal cutoff, with identical binary sizes.
The distribution of constant string equality sizes
during 'go build -a std' is:
40.81% 622 len 0
14.11% 215 len 4
9.45% 144 len 1
7.81% 119 len 3
7.48% 114 len 5
5.12% 78 len 7
4.13% 63 len 2
3.54% 54 len 8
2.69% 41 len 6
1.18% 18 len 10
0.85% 13 len 9
0.66% 10 len 14
0.59% 9 len 17
0.46% 7 len 11
0.26% 4 len 12
0.20% 3 len 19
0.13% 2 len 13
0.13% 2 len 15
0.13% 2 len 16
0.07% 1 len 20
0.07% 1 len 23
0.07% 1 len 33
0.07% 1 len 36
A cutoff of length 6 covers most of the cases.
Benchmarks on amd64 comparing a string to a constant of length 3:
Cmp/1same-8 4.78ns ± 6% 0.94ns ± 9% -80.26% (p=0.000 n=20+20)
Cmp/1diffbytes-8 6.43ns ± 6% 0.96ns ±11% -85.13% (p=0.000 n=20+20)
Cmp/3same-8 4.71ns ± 5% 1.28ns ± 5% -72.90% (p=0.000 n=20+20)
Cmp/3difffirstbyte-8 6.33ns ± 7% 1.27ns ± 7% -79.90% (p=0.000 n=20+20)
Cmp/3difflastbyte-8 6.34ns ± 8% 1.26ns ± 9% -80.13% (p=0.000 n=20+20)
The change to the prove test preserves the
existing intent of the test. When the string was
short, there was a new "proved in bounds" report
that referred to individual byte comparisons.
Change-Id: I593ac303b0d11f275672090c5c786ea0c6b8da13
Reviewed-on: https://go-review.googlesource.com/26758
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
staticassign unwraps all CONVNOPs.
However, in the included test, we need the
CONVNOP for everything to typecheck.
Stop unwrapping unnecessarily.
The code we generate for this example is
suboptimal, but that's not new; see #17113.
Fixes#17111.
Change-Id: I29532787a074a6fe19a5cc53271eb9c84bf1b576
Reviewed-on: https://go-review.googlesource.com/29213
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Get rid of BlockCheck. Josh goaded me into it, and I went
down a rabbithole making it happen.
NilCheck now panics if the pointer is nil and returns void, as before.
BlockCheck is gone, and NilCheck is no longer a Control value for
any block. It just exists (and deadcode knows not to throw it away).
I rewrote the nilcheckelim pass to handle this case. In particular,
there can now be multiple NilCheck ops per block.
I moved all of the arch-dependent nil check elimination done as
part of ssaGenValue into its own proper pass, so we don't have to
duplicate that code for every architecture.
Making the arch-dependent nil check its own pass means I needed
to add a bunch of flags to the opcode table so I could write
the code without arch-dependent ops everywhere.
Change-Id: I419f891ac9b0de313033ff09115c374163416a9f
Reviewed-on: https://go-review.googlesource.com/29120
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
The change corrects the values of the largest float32 value (f1) and the
value of the halfway point between f1 and the next, overflow value (f2).
Fixes#17012
Change-Id: Idaf9997b69d61fafbffdb980d751c9857732e14d
Reviewed-on: https://go-review.googlesource.com/29171
Reviewed-by: Robert Griesemer <gri@golang.org>
CL 28978 (6ec993a) accidentally disabled the test (it would only
run if amd64 AND s390x, whereas it should be amd64 OR s390x).
Change-Id: I23c1ad71724ff55f5808d5896b19b62c8ec5af76
Reviewed-on: https://go-review.googlesource.com/28981
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The new SSA backend modifies the ABI slightly: R0 is now a usable
general purpose register.
Fixes#16677.
Change-Id: I367435ce921e0c7e79e021c80cf8ef5d1d1466cf
Reviewed-on: https://go-review.googlesource.com/28978
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Atomic ops on ARM are implemented with kernel calls, so they are
not intrinsified.
Change-Id: I0e7cc2e5526ae1a3d24b4b89be1bd13db071f8ef
Reviewed-on: https://go-review.googlesource.com/28977
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
When possible, emit static data rather than
init functions for interface values.
This:
* cuts 32k off cmd/go
* removes several error values from runtime init
* cuts the size of the image/color/palette compiled package from 103k to 34k
* reduces the time to build the package in #15520 from 8s to 1.5s
Fixes#6289Fixes#15528
Change-Id: I317112da17aadb180c958ea328ab380f83e640b4
Reviewed-on: https://go-review.googlesource.com/26668
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Redo of CL 28575 with fixed test.
We're in a pre-KeepAlive world for a bit yet, the old tests
were in a client which was in a post-KeepAlive world.
Change-Id: I114fd630339d761ab3306d1d99718d3cb973678d
Reviewed-on: https://go-review.googlesource.com/28582
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reason for revert: broke the build due to cherrypick;
relies on an unsubmitted parent CL.
Original issue's description:
> cmd/compile: ignore contentEscapes for marking nodes as escaping
>
> We can still stack allocate and VarKill nodes which don't
> escape but their content does.
>
> Fixes#16996
>
> Change-Id: If8aa0fcf2c327b4cb880a3d5af8d213289e6f6bf
> Reviewed-on: https://go-review.googlesource.com/28575
> Run-TryBot: Keith Randall <khr@golang.org>
> TryBot-Result: Gobot Gobot <gobot@golang.org>
> Reviewed-by: David Chase <drchase@google.com>
>
Change-Id: Ie1a325209de14d70af6acb2d78269b7a0450da7a
Reviewed-on: https://go-review.googlesource.com/28578
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We can still stack allocate and VarKill nodes which don't
escape but their content does.
Fixes#16996
Change-Id: If8aa0fcf2c327b4cb880a3d5af8d213289e6f6bf
Reviewed-on: https://go-review.googlesource.com/28575
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Includes test case shown to fail with unpatched compiler.
Fixes#17005.
Change-Id: I49b7b1a3f02736d85846a2588018b73f68d50320
Reviewed-on: https://go-review.googlesource.com/28573
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
Enabled checks (except for DUFF-ops which aren't implemented yet).
Added ppc64le to relevant test.
Also updated register list to reflect no-longer-reserved-
for-constants status (file was missed in that change).
Updates #16010.
Change-Id: I31b1aac19e14994f760f2ecd02edbeb1f78362e7
Reviewed-on: https://go-review.googlesource.com/28548
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
It should alias to Xchg instead of Swap. Found when testing #16985.
Change-Id: If9fd734a1f89b8b2656f421eb31b9d1b0d95a49f
Reviewed-on: https://go-review.googlesource.com/28512
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
It was fixed earlier in the Go 1.8 cycle.
Add a test.
Fixes#15895
Change-Id: I5834831235d99b9fcf21b435932cdd7ac6dc2c6e
Reviewed-on: https://go-review.googlesource.com/28476
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
make(T, n, m) returns a slice of type T with length n and capacity m
where "The size arguments n and m must be of integer type or untyped."
https://tip.golang.org/ref/spec#Making_slices_maps_and_channels
The failure to reject typed non-integer size arguments in make
during compile time was uncovered after https://golang.org/cl/27851
changed the generation of makeslice calls.
Fixes #16940
Updates #16949
Change-Id: Ib1e3576f0e6ad199c9b16b7a50c2db81290c63b4
Reviewed-on: https://go-review.googlesource.com/28301
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Intrinsified atomic op produces <value,memory>. Make sure this
memory is considered in the store chain calculation.
Fixes#16948.
Change-Id: I029f164b123a7e830214297f8373f06ea0bf1e26
Reviewed-on: https://go-review.googlesource.com/28350
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Generate a for loop for ranging over strings that only needs to call
the runtime function charntorune for non ASCII characters.
This provides faster iteration over ASCII characters and slightly
faster iteration for other characters.
The runtime function charntorune is changed to take an index from where
to start decoding and returns the index after the last byte belonging
to the decoded rune.
All call sites of charntorune in the runtime are replaced by a for loop
that will be transformed by the compiler instead of calling the charntorune
function directly.
go binary size decreases by 80 bytes.
godoc binary size increases by around 4 kilobytes.
runtime:
name old time/op new time/op delta
RuneIterate/range/ASCII-4 43.7ns ± 3% 10.3ns ± 4% -76.33% (p=0.000 n=44+45)
RuneIterate/range/Japanese-4 72.5ns ± 2% 62.8ns ± 2% -13.41% (p=0.000 n=49+50)
RuneIterate/range1/ASCII-4 43.5ns ± 2% 10.4ns ± 3% -76.18% (p=0.000 n=50+50)
RuneIterate/range1/Japanese-4 72.5ns ± 2% 62.9ns ± 2% -13.26% (p=0.000 n=50+49)
RuneIterate/range2/ASCII-4 43.5ns ± 3% 10.3ns ± 2% -76.22% (p=0.000 n=48+47)
RuneIterate/range2/Japanese-4 72.4ns ± 2% 62.7ns ± 2% -13.47% (p=0.000 n=50+50)
strings:
name old time/op new time/op delta
IndexRune-4 64.7ns ± 5% 22.4ns ± 3% -65.43% (p=0.000 n=25+21)
MapNoChanges-4 269ns ± 2% 157ns ± 2% -41.46% (p=0.000 n=23+24)
Fields-4 23.0ms ± 2% 19.7ms ± 2% -14.35% (p=0.000 n=25+25)
FieldsFunc-4 23.1ms ± 2% 19.6ms ± 2% -14.94% (p=0.000 n=25+24)
name old speed new speed delta
Fields-4 45.6MB/s ± 2% 53.2MB/s ± 2% +16.87% (p=0.000 n=24+25)
FieldsFunc-4 45.5MB/s ± 2% 53.5MB/s ± 2% +17.57% (p=0.000 n=25+24)
Updates #13162
Change-Id: I79ffaf828d82bf9887592f08e5cad883e9f39701
Reviewed-on: https://go-review.googlesource.com/27853
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Martin Möhrmann <martisch@uos.de>
Where possible generate calls to runtime makeslice with int arguments
during compile time instead of makeslice with int64 arguments.
This eliminates converting arguments for calls to makeslice with
int64 arguments for platforms where int64 values do not fit into
arguments of type int.
godoc 386 binary shrinks by approximately 12 kilobyte.
amd64:
name old time/op new time/op delta
MakeSlice-2 29.8ns ± 1% 29.8ns ± 1% ~ (p=1.000 n=24+24)
386:
name old time/op new time/op delta
MakeSlice-2 52.3ns ± 0% 45.9ns ± 0% -12.17% (p=0.000 n=25+22)
Fixes #15357
Change-Id: Icb8701bb63c5a83877d26c8a4b78e782ba76de7c
Reviewed-on: https://go-review.googlesource.com/27851
Run-TryBot: Martin Möhrmann <martisch@uos.de>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Add the following optimizations:
- fold constants
- fold address into load/store
- simplify extensions and conditional branches
- remove nil checks
Turn on SSA on MIPS64 by default, and toggle the tests.
Fixes#16359.
Change-Id: I7f1e38c2509e22e42cd024e712990ebbe47176bd
Reviewed-on: https://go-review.googlesource.com/27870
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The compiler was canonicalizing unnamed types of the form
struct { i int }
across packages, even though an unexported field i should not be
accessible from other packages.
The fix requires both qualifying the field name in the string used by
the compiler to distinguish the type, and ensuring the struct's pkgpath
is set in the rtype version of the data when the type being written is
not part of the localpkg.
Fixes#16616
Change-Id: Ibab160b8b5936dfa47b17dbfd48964a65586785b
Reviewed-on: https://go-review.googlesource.com/27791
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This CL reworks walkcompare for clarity and concision.
It also makes one significant functional change.
(The functional change is hard to separate cleanly
from the cleanup, so I just did them together.)
When inlining and unrolling an equality comparison
for a small struct or array, compare the elements like:
a[0] == b[0] && a[1] == b[1]
rather than
pa := &a
pb := &b
pa[0] == pb[0] && pa[1] == pb[1]
The result is the same, but taking the address
and working through the indirect
forces the backends to generate less efficient code.
This is only an improvement with the SSA backend.
However, every port but s390x now has a working
SSA backend, and switching to the SSA backend
by default everywhere is a priority for Go 1.8.
It thus seems reasonable to start to prioritize
SSA performance over the old backend.
Updates #15303
Sample code:
type T struct {
a, b int8
}
func g(a T) bool {
return a == T{1, 2}
}
SSA before:
"".g t=1 size=80 args=0x10 locals=0x8
0x0000 00000 (badeq.go:7) TEXT "".g(SB), $8-16
0x0000 00000 (badeq.go:7) SUBQ $8, SP
0x0004 00004 (badeq.go:7) FUNCDATA $0, gclocals·23e8278e2b69a3a75fa59b23c49ed6ad(SB)
0x0004 00004 (badeq.go:7) FUNCDATA $1, gclocals·33cdeccccebe80329f1fdbee7f5874cb(SB)
0x0004 00004 (badeq.go:8) MOVBLZX "".a+16(FP), AX
0x0009 00009 (badeq.go:8) MOVB AL, "".autotmp_0+6(SP)
0x000d 00013 (badeq.go:8) MOVBLZX "".a+17(FP), AX
0x0012 00018 (badeq.go:8) MOVB AL, "".autotmp_0+7(SP)
0x0016 00022 (badeq.go:8) MOVB $0, "".autotmp_1+4(SP)
0x001b 00027 (badeq.go:8) MOVB $1, "".autotmp_1+4(SP)
0x0020 00032 (badeq.go:8) MOVB $2, "".autotmp_1+5(SP)
0x0025 00037 (badeq.go:8) MOVBLZX "".autotmp_0+6(SP), AX
0x002a 00042 (badeq.go:8) MOVBLZX "".autotmp_1+4(SP), CX
0x002f 00047 (badeq.go:8) CMPB AL, CL
0x0031 00049 (badeq.go:8) JNE 70
0x0033 00051 (badeq.go:8) MOVBLZX "".autotmp_0+7(SP), AX
0x0038 00056 (badeq.go:8) CMPB AL, $2
0x003a 00058 (badeq.go:8) SETEQ AL
0x003d 00061 (badeq.go:8) MOVB AL, "".~r1+24(FP)
0x0041 00065 (badeq.go:8) ADDQ $8, SP
0x0045 00069 (badeq.go:8) RET
0x0046 00070 (badeq.go:8) MOVB $0, AL
0x0048 00072 (badeq.go:8) JMP 61
SSA after:
"".g t=1 size=32 args=0x10 locals=0x0
0x0000 00000 (badeq.go:7) TEXT "".g(SB), $0-16
0x0000 00000 (badeq.go:7) NOP
0x0000 00000 (badeq.go:7) NOP
0x0000 00000 (badeq.go:7) FUNCDATA $0, gclocals·23e8278e2b69a3a75fa59b23c49ed6ad(SB)
0x0000 00000 (badeq.go:7) FUNCDATA $1, gclocals·33cdeccccebe80329f1fdbee7f5874cb(SB)
0x0000 00000 (badeq.go:8) MOVBLZX "".a+8(FP), AX
0x0005 00005 (badeq.go:8) CMPB AL, $1
0x0007 00007 (badeq.go:8) JNE 25
0x0009 00009 (badeq.go:8) MOVBLZX "".a+9(FP), CX
0x000e 00014 (badeq.go:8) CMPB CL, $2
0x0011 00017 (badeq.go:8) SETEQ AL
0x0014 00020 (badeq.go:8) MOVB AL, "".~r1+16(FP)
0x0018 00024 (badeq.go:8) RET
0x0019 00025 (badeq.go:8) MOVB $0, AL
0x001b 00027 (badeq.go:8) JMP 20
Change-Id: I120185d58012b7bbcdb1ec01225b5b08d0855d86
Reviewed-on: https://go-review.googlesource.com/22277
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Now that we have ops that can return 2 results, have BSF return a result
and flags. We can then get rid of the redundant comparison and use CMOV
instead of CMOVconst ops.
Get rid of a bunch of the ops we don't use. Ctz{8,16}, plus all the Clzs,
and CMOVNEs. I don't think we'll ever use them, and they would be easy
to add back if needed.
Change-Id: I8858a1d017903474ea7e4002fc76a6a86e7bd487
Reviewed-on: https://go-review.googlesource.com/27630
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Blank struct fields are regular unexported fields. Two
blank fields are different if they are from different
packages. In order to correctly differentiate them, the
compiler needs the package information. Add it to the
export data.
Fixes#15514.
Change-Id: I421aaca22b542fcd0d66b2d2db777249cad78df6
Reviewed-on: https://go-review.googlesource.com/27639
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Change-Id: I4faf9a55414e217f0c48528efb13ab8fdcd9bb16
Reviewed-on: https://go-review.googlesource.com/24845
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Add a type conversion to uintptr for untyped constants
before the conversion to unsafe.Pointer.
Fixes#16317
Change-Id: Ib85feccad1019e687e7eb6135890b64b82fb87fb
Reviewed-on: https://go-review.googlesource.com/27441
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is simpler than the sorting technique.
It also allows us to simplify or eliminate
some of the sorting decisions.
Most important, sorting will not work when case clauses
represent ranges of integers: There is no correct
sort order that allows overlap detection by comparing
neighbors. Using a map allows of a cheap, simple
approach to ranges, namely to insert every int
in the map. The equivalent approach for sorting
means juggling temporary Nodes for every int,
which is a lot more expensive.
Change-Id: I84df3cb805992a1b04d14e0e4b2334f943e0ce05
Reviewed-on: https://go-review.googlesource.com/26766
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This is a bit simpler than playing sorting games,
and it is clearer that it generates errors
in the correct (source) order.
It also allows us to simplify sorting.
It also prevents quadratic error messages for
(pathological) inputs with many duplicate type cases.
While we’re here, refactoring deduping into separate functions.
Negligible compilebench impact.
Fixes#15912.
Change-Id: I6cc19edd38875389a70ccbdbdf0d9b7d5ac5946f
Reviewed-on: https://go-review.googlesource.com/26762
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This makes a bunch of changes to package syntax to tweak line numbers
for AST nodes. For example, short variable declaration statements are
now associated with the location of the ":=" token, and function calls
are associated with the location of the final ")" token. These help
satisfy many unit tests that assume the old parser's behavior.
Because many of these changes are questionable, they're guarded behind
a new "gcCompat" const to make them easy to identify and revisit in
the future.
A handful of remaining tests are too difficult to make behave
identically. These have been updated to execute with -newparser=0 and
comments explaining why they need to be fixed.
all.bash now passes with both the old and new parsers.
Change-Id: Iab834b71ca8698d39269f261eb5c92a0d55a3bf4
Reviewed-on: https://go-review.googlesource.com/27199
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This time with the cherry-pick from the proper patch of
the old CL.
Stack size increased.
Corrected NaN-comparison glitches.
Marked g register as clobbered by calls.
Fixed shared libraries.
live_ssa.go still disabled because of differences.
Presumably turning on more optimization will fix
both the stack size and the live_ssa.go glitches.
Enhanced debugging output for shared libs test.
Rebased onto master.
Updates #16010.
Change-Id: I40864faf1ef32c118fb141b7ef8e854498e6b2c4
Reviewed-on: https://go-review.googlesource.com/27159
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
In CSE if a tuple generator is CSE'd to a different block, its
selectors are copied to the same block. In this case, also CES
the copied selectors.
Test copied from Keith's CL 27202.
Fixes#16741.
Change-Id: I2fc8b9513d430f10d6104275cfff5fb75d3ef3d9
Reviewed-on: https://go-review.googlesource.com/27236
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
When T is a scalar, there are no runtime calls
required, which makes this a clear win.
encoding/binary:
WriteInts-8 958ns ± 3% 864ns ± 2% -9.80% (p=0.000 n=15+15)
This also considerably shrinks a core fmt
routine:
Before: "".(*pp).printArg t=1 size=3952 args=0x20 locals=0xf0
After: "".(*pp).printArg t=1 size=2624 args=0x20 locals=0x98
Unfortunately, I find it very hard to get stable
numbers out of the fmt benchmarks due to thermal scaling.
Change-Id: I1278006b030253bf8e48dc7631d18985cdaa143d
Reviewed-on: https://go-review.googlesource.com/26659
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Don't fold constant factors into a multiply
beyond the capacity of a MULQ instruction (32 bits).
Fixes#16733
Change-Id: Idc213c6cb06f7c94008a8cf9e60a9e77d085fd89
Reviewed-on: https://go-review.googlesource.com/27160
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Add more ARM64 optimizations:
- use hardware zero register when it is possible.
- use shifted ops.
The assembler supports shifted ops but not documented, nor knows
how to print it. This CL adds them.
- enable fast division.
This was disabled because it makes the old backend generate slower
code. But with SSA it generates faster code.
Turn on SSA by default, also adjust tests.
Change-Id: I7794479954c83bb65008dcb457bc1e21d7496da6
Reviewed-on: https://go-review.googlesource.com/26950
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Last part of the 386 SSA port.
Modify the x86 backend to simulate SSE registers and
instructions with 387 registers and instructions.
The simulation isn't terribly performant, but it works,
and the old implementation wasn't very performant either.
Leaving to people who care about 387 to optimize if they want.
Turn on SSA backend for 386 by default.
Fixes#16358
Change-Id: I678fb59132620b2c47e993c1c10c4c21135f70c0
Reviewed-on: https://go-review.googlesource.com/25271
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
It's not a new backend, just a PtrSize==4 modification
of the existing AMD64 backend.
Change-Id: Icc63521a5cf4ebb379f7430ef3f070894c09afda
Reviewed-on: https://go-review.googlesource.com/25586
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
SSA compiler on AMD64 may spill Duff-adjusted address as scalar. If
the object is on stack and the stack moves, the spilled address become
invalid.
Making the spill pointer-typed does not work. The Duff-adjusted address
points to the memory before the area to be zeroed and may be invalid.
This may cause stack scanning code panic.
Fix it by doing Duff-adjustment in genValue, so the intermediate value
is not seen by the reg allocator, and will not be spilled.
Add a test to cover both cases. As it depends on allocation, it may
be not always triggered.
Fixes#16515.
Change-Id: Ia81d60204782de7405b7046165ad063384ede0db
Reviewed-on: https://go-review.googlesource.com/25309
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
NaCl code runs in sandbox and there are restrictions for its
instruction uses
(https://developer.chrome.com/native-client/reference/sandbox_internals/arm-32-bit-sandbox).
Like the legacy backend, on NaCl,
- don't use R9, which is used as NaCl's "thread pointer".
- don't use Duff's device.
- don't use indexed load/stores.
- the assembler rewrites DIV/MOD to runtime calls, which on NaCl
clobbers R12, so R12 is marked as clobbered for DIV/MOD.
- other restrictions are satisfied by the assembler.
Enable SSA specific tests on nacl/arm, and disable non-SSA ones.
Updates #15365.
Change-Id: I9262693ec6756b89ca29d3ae4e52a96fe5403b02
Reviewed-on: https://go-review.googlesource.com/24859
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This new comment can be used to declare that the uintptr arguments to a
function may be converted from pointers, and that those pointers should
be considered to escape. This is used for the Call methods in
dll_windows.go that take uintptr arguments, because they call Syscall.
We can't treat these functions as we do syscall.Syscall, because unlike
Syscall they may cause the stack to grow. For Syscall we can assume that
stack arguments can remain on the stack, but for these functions we need
them to escape.
Fixes#16035.
Change-Id: Ia0e5b4068c04f8d303d95ab9ea394939f1f57454
Reviewed-on: https://go-review.googlesource.com/24551
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
As Josh mentioned in CL 24716, there has been requests for using SSA
for ARM. SSA can still be disabled by setting -ssa=0 for cmd/compile,
or partially enabled with GOSSAFUNC, GOSSAPKG, and GOSSAHASH.
Not enable SSA by default on NaCl, which is not supported yet.
Enable SSA-specific tests on ARM: live_ssa.go and nilptr3_ssa.go;
disable non-SSA tests: live.go, nilptr3.go, and slicepot.go.
Updates #15365.
Change-Id: Ic2ca8d166aeca8517b9d262a55e92f2130683a16
Reviewed-on: https://go-review.googlesource.com/23953
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
If we don't mark them as needzero, we have a live pointer variable
containing possible garbage, which will baffle the GC.
Fixes#16249.
Change-Id: I7c423ceaca199ddd46fc2c23e5965e7973f07584
Reviewed-on: https://go-review.googlesource.com/24715
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Prior to this change package "foo" had to be installed in order to check
example names in "foo_test" package.
However by the time "foo_test" package is checked a parsed "foo" package
has been already constructed. Use it to check example names.
Also change TestDivergentPackagesExamples test to pass directory of the
package to the vet tool as it is the most common way to invoke it. This
requires changes to errchk to add support for grabbing source files from
a directory.
Fixes#16189
Change-Id: Ief103d07b024822282b86c24250835cc591793e8
Reviewed-on: https://go-review.googlesource.com/24488
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The compiler was treating all global function literals as occurring in a
function named "glob", which caused a symbol name collision when there
was an actual function named "glob". Fixed by adding a period.
Fixes#16193.
Change-Id: I67792901a8ca04635ba41d172bfaee99944f594d
Reviewed-on: https://go-review.googlesource.com/24500
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Make sure the pointer to the heap copy of an output parameter is kept
live throughout the function. The function could panic at any point,
and then a defer could recover. Thus, we need the pointer to the heap
copy always available so the post-deferreturn code can copy the return
value back to the stack.
Before this CL, the pointer to the heap copy could be considered dead in
certain situations, like code which is reverse dominated by a panic call.
Fixes#16095.
Change-Id: Ic3800423e563670e5b567b473bf4c84cddb49a4c
Reviewed-on: https://go-review.googlesource.com/24213
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This is a regression from 1.6. The respective code in importimport
(export.go) was not exactly replicated with the new importer. Also
copied over the missing cyclic import check.
Added test cases.
Fixes#16133.
Change-Id: I1e0a39ff1275ca62a8054874294d400ed83fb26a
Reviewed-on: https://go-review.googlesource.com/24312
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
If -s is specified, each file is considered a separate
package even if multiple files have the same package names.
For instance, the action and flag "errorcheckdir -s"
will compile all files in the respective directory as
individual packages.
Change-Id: Ic5c2f9e915a669433f66c2d3fe0ac068227a502f
Reviewed-on: https://go-review.googlesource.com/24313
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
A straight conversion from a type T to an interface type I, where T does
not implement I, should always panic with an interface conversion error
that shows the missing method. This was not happening if the conversion
was done once using the comma-ok form (the result would not be OK) and
then again in a straight conversion. Due to an error in the runtime
package the second conversion was failing with a nil pointer
dereference.
Fixes#16130.
Change-Id: I8b9fca0f1bb635a6181b8b76de8c2385bb7ac2d2
Reviewed-on: https://go-review.googlesource.com/24284
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Michel Lespinasse <walken@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This adds 8 bytes of binary size to every type that has methods. It is
the smallest change I could come up with for 1.7.
Fixes#16037
Change-Id: Ibe15c3165854a21768596967757864b880dbfeed
Reviewed-on: https://go-review.googlesource.com/24070
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Special case for rewriting OAS inits omitted OASWB, added
that and OAS2FUNC. The special case cannot be default case,
that causes racewalk to fail in horrible ways.
Fixes#16008.
Change-Id: Ie0d2f5735fe9d8255a109597b36d196d4f86703a
Reviewed-on: https://go-review.googlesource.com/23954
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The generated code for interface stubs sometimes just messes
with a few of the args and then tail-calls to the target routine.
The args that aren't explicitly modified appear to not be used.
But they are used, by the thing we're tail calling.
Fixes#16016
Change-Id: Ib9b3a8311bb714a201daee002885fcb59e0463fa
Reviewed-on: https://go-review.googlesource.com/23960
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This matches the behavior of the legacy backend.
Fixes#15975 (if this is the intended behavior)
Change-Id: Id277959069b8b8bf9958fa8f2cbc762c752a1a19
Reviewed-on: https://go-review.googlesource.com/23820
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Post-liveness fix, the slices on both sides can now be
indirects of & variables. The cgen code handles those
cases just fine.
Fixes#15988
Change-Id: I378ad1d5121587e6107a9879c167291a70bbb9e4
Reviewed-on: https://go-review.googlesource.com/23863
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Make sure auto names don't conflict with function names. Before this CL,
we confused name a.len (the len field of the slice a) with a.len (the function
len declared on a).
Fixes#15961
Change-Id: I14913de697b521fb35db9a1b10ba201f25d552bb
Reviewed-on: https://go-review.googlesource.com/23789
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Adding a .def suffix for DWARF info collided with the DWARF info,
without the suffix, for a method named def. Change the suffix to ..def
instead.
Fixes#15926.
Change-Id: If1bf1bcb5dff1d7f7b79f78e3f7a3bbfcd2201bb
Reviewed-on: https://go-review.googlesource.com/23733
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
If memory might be unaligned, zero it one byte at a time
instead of 4 bytes at a time.
Fixes#15902
Change-Id: I4eff0840e042e2f137c1a4028f08793eb7dfd703
Reviewed-on: https://go-review.googlesource.com/23587
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
Some of these errors are reported in the wrong places.
That’s issue #15911 and #15912.
Change-Id: Ia09d7f89be4d15f05217a542a61b6ac08090dd87
Reviewed-on: https://go-review.googlesource.com/23588
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The liveness computation of parameters generally was never
correct, but forcing all parameters to be live throughout the
function covered up that problem. The new SSA back end is
too clever: even though it currently keeps the parameter values live
throughout the function, it may find optimizations that mean
the current values are not written back to the original parameter
stack slots immediately or ever (for example if a parameter is set
to nil, SSA constant propagation may replace all later uses of the
parameter with a constant nil, eliminating the need to write the nil
value back to the stack slot), so the liveness code must now
track the actual operations on the stack slots, exposing these
problems.
One small problem in the handling of arguments is that nodarg
can return ONAME PPARAM nodes with adjusted offsets, so that
there are actually multiple *Node pointers for the same parameter
in the instruction stream. This might be possible to correct, but
not in this CL. For now, we fix this by using n.Orig instead of n
when considering PPARAM and PPARAMOUT nodes.
The major problem in the handling of arguments is general
confusion in the liveness code about the meaning of PPARAM|PHEAP
and PPARAMOUT|PHEAP nodes, especially as contrasted with PAUTO|PHEAP.
The difference between these two is that when a local variable "moves"
to the heap, it's really just allocated there to start with; in contrast,
when an argument moves to the heap, the actual data has to be copied
there from the stack at the beginning of the function, and when a
result "moves" to the heap the value in the heap has to be copied
back to the stack when the function returns
This general confusion is also present in the SSA back end.
The PHEAP bit worked decently when I first introduced it 7 years ago (!)
in 391425ae. The back end did nothing sophisticated, and in particular
there was no analysis at all: no escape analysis, no liveness analysis,
and certainly no SSA back end. But the complications caused in the
various downstream consumers suggest that this should be a detail
kept mainly in the front end.
This CL therefore eliminates both the PHEAP bit and even the idea of
"heap variables" from the back ends.
First, it replaces the PPARAM|PHEAP, PPARAMOUT|PHEAP, and PAUTO|PHEAP
variable classes with the single PAUTOHEAP, a pseudo-class indicating
a variable maintained on the heap and available by indirecting a
local variable kept on the stack (a plain PAUTO).
Second, walkexpr replaces all references to PAUTOHEAP variables
with indirections of the corresponding PAUTO variable.
The back ends and the liveness code now just see plain indirected
variables. This may actually produce better code, but the real goal
here is to eliminate these little-used and somewhat suspect code
paths in the back end analyses.
The OPARAM node type goes away too.
A followup CL will do the same to PPARAMREF. I'm not sure that
the back ends (SSA in particular) are handling those right either,
and with the framework established in this CL that change is trivial
and the result clearly more correct.
Fixes#15747.
Change-Id: I2770b1ce3cbc93981bfc7166be66a9da12013d74
Reviewed-on: https://go-review.googlesource.com/23393
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The importer had several bugs with respect to labels and gotos:
- it didn't create a new ONAME node for label names (label dcl,
goto, continue, and break)
- it overwrote the symbol for gotos with the dclstack
- it didn't set the dclstack for labels
In the process changed export format slightly to always assume
a label name for labels and gotos, and never assume a label for
fallthroughs.
For fallthroughs and switch cases, now also set Xoffset like in
the parser. (Not setting it, i.e., using 0 was ok since this is
only used for verifying correct use of fallthroughs, which was
checked already. But it's an extra level of verification of the
import.)
Fixes#15838.
Change-Id: I3637f6314b8651c918df0c8cd70cd858c92bd483
Reviewed-on: https://go-review.googlesource.com/23445
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CL 21462 and CL 21463 made this message say explicitly that the problem
was a struct field in a map, but the word "directly" is unnecessary,
sounds wrong, and makes the error long.
Change-Id: I2fb68cdaeb8bd94776b8022cf3eae751919ccf6f
Reviewed-on: https://go-review.googlesource.com/23373
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Non-syntax errors are always counted to determine if to exit
early, but then deduplication eliminates them. This can lead
to situations which report "too many errors" and only one
error is shown.
De-duplicate non-syntax errors early, at least the ones that
appear consecutively, and only count the ones actually being
shown. This doesn't work perfectly as they may not appear in
sequence, but it's cheap and good enough.
Fixes#14136.
Change-Id: I7b11ebb2e1e082f0d604b88e544fe5ba967af1d7
Reviewed-on: https://go-review.googlesource.com/23259
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
They get rewritten to NEWs, and they must be marked as escaping
so walk doesn't try to allocate them back onto the stack.
Fixes#15733
Change-Id: I433033e737c3de51a9e83a5a273168dbc9110b74
Reviewed-on: https://go-review.googlesource.com/23223
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Run live vars test only on ssa builds.
We can't just drop KeepAlive ops during regalloc. We need
to replace them with copies.
Change-Id: Ib4b3b1381415db88fdc2165fc0a9541b73ad9759
Reviewed-on: https://go-review.googlesource.com/23225
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Introduce a KeepAlive op which makes sure that its argument is kept
live until the KeepAlive. Use KeepAlive to mark pointer input
arguments as live after each function call and at each return.
We do this change only for pointer arguments. Those are the
critical ones to handle because they might have finalizers.
Doing compound arguments (slices, structs, ...) is more complicated
because we would need to track field liveness individually (we do
that for auto variables now, but inputs requires extra trickery).
Turn off the automatic marking of args as live. That way, when args
are explicitly nulled, plive will know that the original argument is
dead.
The KeepAlive op will be the eventual implementation of
runtime.KeepAlive.
Fixes#15277
Change-Id: I5f223e65d99c9f8342c03fbb1512c4d363e903e5
Reviewed-on: https://go-review.googlesource.com/22365
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
Previously statements like
f(unsafe.Pointer(g()), int(h()))
would be reordered into a sequence of statements like
autotmp_g := g()
autotmp_h := h()
f(unsafe.Pointer(autotmp_g), int(autotmp_h))
which can leave g's temporary value on the stack as a uintptr, rather
than an unsafe.Pointer. Instead, recognize uintptr-to-unsafe.Pointer
conversions when reordering function calls to instead produce:
autotmp_g := unsafe.Pointer(g())
autotmp_h := h()
f(autotmp_g, int(autotmp_h))
Fixes#15329.
Change-Id: I2cdbd89d233d0d5c94791513a9fd5fd958d11ed5
Reviewed-on: https://go-review.googlesource.com/22273
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
See #15604. This was a bug in a CL that has since been
rolled back. Adding a test to challenge the next attempter.
Change-Id: Ic43be254ea6eaab0071018cdc61d9b1c21f19cbf
Reviewed-on: https://go-review.googlesource.com/23000
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
In regalloc, a sparse map is preallocated for later use by
spill-in-loop sinking. However, variables (spills) are added
during register allocation before spill sinking, and a map
query involving any of these new variables will index out of
bounds in the map.
To fix:
1) fix the queries to use s.orig[v.ID].ID instead, to ensure
proper indexing. Note that s.orig will be nil for values
that are not eligible for spilling (like memory and flags).
2) add a test.
Fixes#15585.
Change-Id: I8f2caa93b132a0f2a9161d2178320d5550583075
Reviewed-on: https://go-review.googlesource.com/22911
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This flag is experimental and the semantics may change
even after Go 1.7 is released. There are no changes to code
not using the flag.
The first part is for reading by future compiles.
The second part is for reading by the final link step.
Splitting the file this way allows distributed build systems
to ship the compile-input part only to compile steps and
the linker-input part only to linker steps.
The first part is basically just the export data,
and the second part is basically everything else.
The overall files still have the same broad structure,
so that existing tools will work with both halves.
It's just that various pieces are empty in the two halves.
This also copies the two bits of data the linker needed from
export data into the object header proper, so that the linker
doesn't need any export data at all. That eliminates a TODO
that was left for switching to the binary export data.
(Now the linker doesn't need to know about the switch.)
The default is still to write out a combined output file.
Nothing changes unless you pass -linkobj to the compiler.
There is no support in the go command for -linkobj,
since the go command doesn't copy objects around.
The expectation is that other build systems (like bazel, say)
might take advantage of this.
The header adjustment and the option for the split output
was intended as part of the zip archives, but the zip archives
have been cut from Go 1.7. Doing this to the current archives
both unblocks one step in the switch to binary export data
and enables alternate build systems to experiment with the
new flag using the Go 1.7 release.
Change-Id: I8b6eab25b8a22b0a266ba0ac6d31e594f3d117f3
Reviewed-on: https://go-review.googlesource.com/22500
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The problem was fixed by the rollback in CL 22930.
This CL just adds a test to prevent regressions.
Fixes#15602
Change-Id: I37453f6e18ca43081266fe7f154c6d63fbaffd9b
Reviewed-on: https://go-review.googlesource.com/22931
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The new export format keeps track of all types that are exported.
If a type is seen that was exported before, only a reference to
that type is emitted. The importer maintains a list of all the
seen types and uses that list to resolve type references.
The existing compiler infrastructure's invariants assumes that
only named types are referred to before they are fully set up.
Referring to unnamed incomplete types causes problems. One of
the issues was #15548.
Added a new internal flag 'trackAllTypes' to enable/disable
this type tracking. With this change only named types are
tracked.
Verified that this fix also addresses #15548, even w/o the
prior fix for that issue (in fact that prior fix is turned
off if trackAllTypes is disabled because it's not needed).
The test for #15548 covers also this change.
For #15548.
Change-Id: Id0b3ff983629703d025a442823f99649fd728a56
Reviewed-on: https://go-review.googlesource.com/22839
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The boolean destination in an OAS2DOTTYPE expression craps out during
compilation when trying to assign to a map entry because, unlike slice entries,
map entries are not directly addressable in memory. The solution is to
properly order the boolean destination node so that map entries are set
via autotmp variables.
Fixes#14678
Change-Id: If344e8f232b5bdac1b53c0f0d21eeb43ab17d3de
Reviewed-on: https://go-review.googlesource.com/22833
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Accidentally checked in the version of file c.go that doesn't
exhibit the bug - hence the test was not testing the bug fix.
Double-checked that this version exposes the bug w/o the fix.
Change-Id: Ie4dc455229d1ac802a80164b5d549c2ad4d971f5
Reviewed-on: https://go-review.googlesource.com/22837
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
external linking is now supported.
Change-Id: I13e90c39dad86e60781adecdbe8e6bc9e522f740
Reviewed-on: https://go-review.googlesource.com/19811
Reviewed-by: Minux Ma <minux@golang.org>
This is necessary to avoid disrupting the go1 suite and gives
us a place to put other tests of basic compiler function and
correctness.
Change-Id: I36933819ff2bfe6a2121fff2be9a98efd2123d9a
Reviewed-on: https://go-review.googlesource.com/22597
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The underlying issues have been fixed.
All the individual fixes have their own tests,
but it's still useful to have a plain source test.
Fixes#15084
Change-Id: I06c485a7d0716201bd57d1f3be53668dddd7ec14
Reviewed-on: https://go-review.googlesource.com/22426
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This is a follow-up to CLs 19769 and 19770.
Change-Id: Ia9b71055613b80df4ce62b34fcc4f479f04f72fd
Reviewed-on: https://go-review.googlesource.com/22399
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
func f(x, y, z *int) {
a := []*int{x,y,z}
...
}
We used to use:
var tmp [3]*int
a := tmp[:]
a[0] = x
a[1] = y
a[2] = z
Now we do:
var tmp [3]*int
tmp[0] = x
tmp[1] = y
tmp[2] = z
a := tmp[:]
Doesn't sound like a big deal, but the compiler has trouble
eliminating write barriers when using the former method because it
doesn't know that the slice points to the stack. In the latter
method, the compiler knows the array is on the stack and as a result
doesn't emit any write barriers.
This turns out to be extremely common when building ... args, like
for calls fmt.Printf.
Makes go binaries ~1% smaller.
Doesn't have a measurable effect on the go1 fmt benchmarks,
unfortunately.
Fixes#14263
Update #6853
Change-Id: I9074a2788ec9e561a75f3b71c119b69f304d6ba2
Reviewed-on: https://go-review.googlesource.com/22395
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
See discussion at [1]. True value must have a fixed non-zero
representation meaning that a && b can be implemented as a & b.
[1] https://groups.google.com/forum/#!topic/golang-dev/xV0vPuFP9Vg
This change helps with m := a && b, but it's more common to see
if a && b { do something } which is not handled.
Change-Id: Ib6f9ff898a0a8c05d12466e2464e4fe781035394
Reviewed-on: https://go-review.googlesource.com/22313
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
They are guaranteed to be non-nil, no point in inserting
nil checks for them.
Fixes#15390
Change-Id: I3b9a0f2319affc2139dcc446d0a56c6785ae5a86
Reviewed-on: https://go-review.googlesource.com/22291
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
func f(a, b bool) bool {
return a || b
}
is now a single instructions (excluding loading and unloading the arguments):
v10 = ORB <bool> v11 v12 : AX
Change-Id: Iff63399410cb46909f4318ea1c3f45a029f4aa5e
Reviewed-on: https://go-review.googlesource.com/21872
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
The result of ODOTPTR, as well as a bunch of other ops,
should be the type of the result, not always a pointer type.
This fixes an amd64p32 bug where we were incorrectly truncating
a 64-bit slice index to 32 bits, and then barfing on a weird
load-64-bits-but-then-truncate-to-32-bits op that doesn't exist.
Fixes#15252
Change-Id: Ie62f4315fffd79f233e5449324ccc0879f5ac343
Reviewed-on: https://go-review.googlesource.com/22094
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Print numGC followed by numGC1, rather than printing numGC twice.
Change-Id: I8e7144b6a11d4ae9be0d82d88b86fed04b906e2f
Reviewed-on: https://go-review.googlesource.com/22087
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Map keys are currently validated in multiple locations but share
a common validation routine. The problem is that early validations
should be lenient enough to allow for forward types while the final
validations should not. The final validations should fail on forward
types since they've already settled.
This change also separates the key type checking from the creation
of the map via typMap. Instead of the mapqueue being populated in
copytype() by checking the map line number, it's populated in the
same block that validates the key type. This isolates key validation
logic while type checking.
Fixes#14988
Change-Id: Ia47cf6213585d6c63b3a35249104c0439feae658
Reviewed-on: https://go-review.googlesource.com/21830
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Removes 49 more bound checks in make.bash. For example:
var a[100]int
for i := 0; i < 50; i++ {
use a[i+25]
}
Change-Id: I85e0130ee5d07f0ece9b17044bba1a2047414ce7
Reviewed-on: https://go-review.googlesource.com/21379
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Be more careful about inserting instrumentation in racewalk.
If the node being instrumented is an OAS, and it has a non-
empty Ninit, then append instrumentation to the Ninit list
rather than letting it be inserted before the OAS (and the
compilation of its init list). This deals with the case that
the Ninit list defines a variable used in the RHS of the OAS.
Fixes#15091.
Change-Id: Iac91696d9104d07f0bf1bd3499bbf56b2e1ef073
Reviewed-on: https://go-review.googlesource.com/21771
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: David Chase <drchase@google.com>
Fails for the same reason as ppc64 and mips64 (incomplete
optimization).
Change-Id: Ieb4d997fc27d4f2b756e63dd7f588abe10c0213a
Reviewed-on: https://go-review.googlesource.com/20963
Reviewed-by: Bill O'Farrell <billotosyr@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Make sure the results of unsigned constant-folded
shifts are sign-extended into the AuxInt field.
Fixes#15175
Change-Id: I3490d1bc3d9b2e1578ed30964645508577894f58
Reviewed-on: https://go-review.googlesource.com/21586
Reviewed-by: Alexandru Moșoi <alexandru@mosoi.ro>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fold the comparison when the SHR result is small.
Useful for:
- murmur mix like hashing where higher bits are desirable, i.e. hash = uint32(i * C) >> 18
- integer log2 via DeBruijn sequence: http://graphics.stanford.edu/~seander/bithacks.html#IntegerLogDeBruijn
Change-Id: If70ae18cb86f4cc83ab6213f88ced03cc4986156
Reviewed-on: https://go-review.googlesource.com/21514
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Test goprint.go sometimes failed on a slow builder (plan9_arm)
because of timing dependency. Instead of sleeping for a fixed
time to allow the child goroutine to finish, wait explicitly for
child termination by calling runtime.NumGoroutine until the
returned value is 1.
Fixes#15097
Change-Id: Ib3ef5ec3c8277083c774542f48bcd4ff2f79efde
Reviewed-on: https://go-review.googlesource.com/21603
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
No point in doing anything for x=x assignments.
In addition, skipping these assignments prevents generating:
VARDEF x
COPY x -> x
which is bad because x is incorrectly considered
dead before the vardef.
Fixes#14904
Change-Id: I6817055ec20bcc34a9648617e0439505ee355f82
Reviewed-on: https://go-review.googlesource.com/21470
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
Missed a case for closure calls (OCALLFUNC && indirect) in
esc.go:esccall.
Cleanup to runtime code for windows to more thoroughly hide
a technical escape. Also made code pickier about failing
to late non-optional kernel32.dll.
Fixes#14409.
Change-Id: Ie75486a2c8626c4583224e02e4872c2875f7bca5
Reviewed-on: https://go-review.googlesource.com/20102
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Since BCE happens over several passes (opt, loopbce, prove)
it's easy to regress especially with rewriting.
The pass is only activated with special debug flag.
Change-Id: I46205982e7a2751156db8e875d69af6138068f59
Reviewed-on: https://go-review.googlesource.com/21510
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Identify this assignment case and instead of the more general error
prog.go:6: cannot assign to students["sally"].age
produce
prog.go:6: cannot directly assign to struct field students["sally"].age in map
that explains why the assignment is not possible.
Fixes#13779.
Change-Id: I90c10b445f907834fc1735aa66e44a0f447aa74f
Reviewed-on: https://go-review.googlesource.com/21462
Reviewed-by: David Chase <drchase@google.com>
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Change-Id: I91873aaebf79bdf1c00d38aacc1a1fb8d79656a7
Reviewed-on: https://go-review.googlesource.com/21433
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Handle this case:
if 0 <= i && i < len(a) {
use a[i]
}
Shaves about 5k from pkg/tools/linux_amd64/*.
Change-Id: I6675ff49aa306b0d241b074c5738e448204cd981
Reviewed-on: https://go-review.googlesource.com/21431
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The issue was seen when inlining an exported function that contained
a fallthrough statement.
Fixes#15071
Change-Id: I1e8215ad49d57673dba7e8f8bd2ed8ad290dc452
Reviewed-on: https://go-review.googlesource.com/21452
Reviewed-by: Dave Cheney <dave@cheney.net>
There are 5293 loop in the main go repository.
A survey of the top most common for loops:
18 for __k__ := 0; i < len(sa.Addr); i++ {
19 for __k__ := 0; ; i++ {
19 for __k__ := 0; i < 16; i++ {
25 for __k__ := 0; i < length; i++ {
30 for __k__ := 0; i < 8; i++ {
49 for __k__ := 0; i < len(s); i++ {
67 for __k__ := 0; i < n; i++ {
376 for __k__ := range __slice__ {
685 for __k__, __v__ := range __slice__ {
2074 for __, __v__ := range __slice__ {
The algorithm to find induction variables handles all cases
with an upper limit. It currently doesn't find related induction
variables such as c * ind or c + ind.
842 out of 22954 bound checks are removed for src/make.bash.
1957 out of 42952 bounds checks are removed for src/all.bash.
Things to do in follow-up CLs:
* Find the associated pointer for `for _, v := range a {}`
* Drop the NilChecks on the pointer.
* Replace the implicit induction variable by a loop over the pointer
Generated garbage can be reduced if we share the sdom between passes.
% benchstat old.txt new.txt
name old time/op new time/op delta
Template 337ms ± 3% 333ms ± 3% ~ (p=0.258 n=9+9)
GoTypes 1.11s ± 2% 1.10s ± 2% ~ (p=0.912 n=10+10)
Compiler 5.25s ± 1% 5.29s ± 2% ~ (p=0.077 n=9+9)
MakeBash 33.5s ± 1% 34.1s ± 2% +1.85% (p=0.011 n=9+9)
name old alloc/op new alloc/op delta
Template 63.6MB ± 0% 63.9MB ± 0% +0.52% (p=0.000 n=10+9)
GoTypes 218MB ± 0% 219MB ± 0% +0.59% (p=0.000 n=10+9)
Compiler 978MB ± 0% 985MB ± 0% +0.69% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
Template 582k ± 0% 583k ± 0% +0.10% (p=0.000 n=10+10)
GoTypes 1.78M ± 0% 1.78M ± 0% +0.12% (p=0.000 n=10+10)
Compiler 7.68M ± 0% 7.69M ± 0% +0.05% (p=0.000 n=10+10)
name old text-bytes new text-bytes delta
HelloSize 581k ± 0% 581k ± 0% -0.08% (p=0.000 n=10+10)
CmdGoSize 6.40M ± 0% 6.39M ± 0% -0.08% (p=0.000 n=10+10)
name old data-bytes new data-bytes delta
HelloSize 3.66k ± 0% 3.66k ± 0% ~ (all samples are equal)
CmdGoSize 134k ± 0% 134k ± 0% ~ (all samples are equal)
name old bss-bytes new bss-bytes delta
HelloSize 126k ± 0% 126k ± 0% ~ (all samples are equal)
CmdGoSize 149k ± 0% 149k ± 0% ~ (all samples are equal)
name old exe-bytes new exe-bytes delta
HelloSize 947k ± 0% 946k ± 0% -0.01% (p=0.000 n=10+10)
CmdGoSize 9.92M ± 0% 9.91M ± 0% -0.06% (p=0.000 n=10+10)
Change-Id: Ie74bdff46fd602db41bb457333d3a762a0c3dc4d
Reviewed-on: https://go-review.googlesource.com/20517
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
Added a debug flag "-d closure" to explain compilation of
closures (should this be done some other way? Should we
rewrite the "-m" flag to "-d escapes"?) Used this to
discover that cause was an OXXX node in the captured vars
list, and in turn noticed that OXXX nodes are explicitly
ignored in all other processing of captured variables.
Couldn't figure out a reproducer, did verify that this OXXX
was not caused by an unnamed return value (which is one use
of these). Verified lack of heap allocation by examining -S
output.
Assembly:
(runtime/mgc.go:1371) PCDATA $0, $2
(runtime/mgc.go:1371) CALL "".notewakeup(SB)
(runtime/mgc.go:1377) LEAQ "".gcBgMarkWorker.func1·f(SB), AX
(runtime/mgc.go:1404) MOVQ AX, (SP)
(runtime/mgc.go:1404) MOVQ "".autotmp_2242+88(SP), CX
(runtime/mgc.go:1404) MOVQ CX, 8(SP)
(runtime/mgc.go:1404) LEAQ go.string."GC worker (idle)"(SB), AX
(runtime/mgc.go:1404) MOVQ AX, 16(SP)
(runtime/mgc.go:1404) MOVQ $16, 24(SP)
(runtime/mgc.go:1404) MOVB $20, 32(SP)
(runtime/mgc.go:1404) MOVQ $0, 40(SP)
(runtime/mgc.go:1404) PCDATA $0, $2
(runtime/mgc.go:1404) CALL "".gopark(SB)
Added a check for compiling_runtime to ensure that this is
caught in the future. Added a test to test the check.
Verified that 1.5.3 did NOT reject the test case when
compiled with -+ flag, so this is not a recently added bug.
Cause of bug is two-part -- there was no leaking closure
detection ever, and instead it relied on capture-of-variables
to trigger compiling_runtime test, but closures improved in
1.5.3 so that mere capture of a value did not also capture
the variable, which thus allowed closures to escape, as well
as this case where the escape was spurious. In
fixedbugs/issue14999.go, compare messages for f and g;
1.5.3 would reject g, but not f. 1.4 rejects both because
1.4 heap-allocates parameter x for both.
Fixes#14999.
Change-Id: I40bcdd27056810628e96763a44f2acddd503aee1
Reviewed-on: https://go-review.googlesource.com/21322
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The change in 20907 fixed varexpr but broke aliased. After that change,
a reference to a field in a struct would not be seen as aliasing itself.
Before that change, it would, but only because all fields in a struct
aliased everything.
This CL changes the compiler to consider all references to a field as
aliasing all other fields in that struct. This is imperfect--a
reference to one field does not alias another field--but is a simple fix
for the immediate problem. A better fix would require tracking the
specific fields as well.
Fixes#15042.
Change-Id: I5c95c0dd7b0699e53022fce9bae2e8f50d6d1d04
Reviewed-on: https://go-review.googlesource.com/21390
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Compound AUTO types weren't named previously. That was because live
variable analysis (plive.go) doesn't handle spilling to compound types.
It can't handle them because there is no valid place to put VARDEFs when
regalloc is spilling compound types.
compound types = multiword builtin types: complex, string, slice, and
interface.
Instead, we split named AUTOs into individual one-word variables. For
example, a string s gets split into a byte ptr s.ptr and an integer
s.len. Those two variables can be spilled to / restored from
independently. As a result, live variable analysis can handle them
because they are one-word objects.
This CL will change how AUTOs are described in DWARF information.
Consider the code:
func f(s string, i int) int {
x := s[i:i+5]
g()
return lookup(x)
}
The old compiler would spill x to two consecutive slots on the stack,
both named x (at offsets 0 and 8). The new compiler spills the pointer
of x to a slot named x.ptr. It doesn't spill x.len at all, as it is a
constant (5) and can be rematerialized for the call to lookup.
So compound objects may not be spilled in their entirety, and even if
they are they won't necessarily be contiguous. Such is the price of
optimization.
Re-enable live variable analysis tests. One test remains disabled, it
fails because of #14904.
Change-Id: I8ef2b5ab91e43a0d2136bfc231c05d100ec0b801
Reviewed-on: https://go-review.googlesource.com/21233
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Find comparisons to constants and propagate that information
down the dominator tree. Use it to resolve other constant
comparisons on the same variable.
So if we know x >= 7, then a x > 4 condition must return true.
This change allows us to use "_ = b[7]" hints to eliminate bounds checks.
Fixes#14900
Change-Id: Idbf230bd5b7da43de3ecb48706e21cf01bf812f7
Reviewed-on: https://go-review.googlesource.com/21008
Reviewed-by: Alexandru Moșoi <alexandru@mosoi.ro>
Pushed from an old client by mistake. These are the
missing changes.
Change-Id: Ia8d61c5c0bde907369366ea9ea98711823342803
Reviewed-on: https://go-review.googlesource.com/21349
Reviewed-by: Todd Neal <todd@tneal.org>
We need to make sure all the bounds checks pass before issuing
a load which combines several others. We do this by issuing the
combined load at the last load's block, where "last" = closest to
the leaf of the dominator tree.
Fixes#15002
Change-Id: I7358116db1e039a072c12c0a73d861f3815d72af
Reviewed-on: https://go-review.googlesource.com/21246
Reviewed-by: Todd Neal <todd@tneal.org>
Previously, cmd/compile rejected constant int->string conversions if
the integer value did not fit into an "int" value. Also, runtime
incorrectly truncated 64-bit values to 32-bit before checking if
they're a valid Unicode code point. According to the Go spec, both of
these cases should instead yield "\uFFFD".
Fixes#15039.
Change-Id: I3c8a3ad9a0780c0a8dc1911386a523800fec9764
Reviewed-on: https://go-review.googlesource.com/21344
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This only tests amd64 because it's currently broken on non-SSA
backends.
Fixes#8613
Change-Id: I6bc501c81c395e533bb9c7335789750e0c6b7a8f
Reviewed-on: https://go-review.googlesource.com/21325
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
* This is an improved version of an earlier patch.
* Verified with gcc up to 100.
* Limited to two instructions based on costs from
https://gmplib.org/~tege/x86-timing.pdf
Change-Id: Ib7c37de6fd8e0ba554459b15c7409508cbcf6728
Reviewed-on: https://go-review.googlesource.com/21103
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
One intrinsic was needed to help get the very best
performance out of a future GC; as long as that one was
being added, I also added Bswap since that is sometimes
a handy thing to have. I had intended to fill out the
bit-scan intrinsic family, but the mismatch between the
"scan forward" instruction and "count leading zeroes"
was large enough to cause me to leave it out -- it poses
a dilemma that I'd rather dodge right now.
These intrinsics are not exposed for general use.
That's a separate issue requiring an API proposal change
( https://github.com/golang/proposal )
All intrinsics are tested, both that they are substituted
on the appropriate architecture, and that they produce the
expected result.
Change-Id: I5848037cfd97de4f75bdc33bdd89bba00af4a8ee
Reviewed-on: https://go-review.googlesource.com/20564
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This makes the rounding bug fix in math/big for issue 14651 available
to the compiler.
- changes to cmd/compile/internal/big fully automatic via script
- added test case for issue
- updated old test case with correct test data
Fixes#14651.
Change-Id: Iea37a2cd8d3a75f8c96193748b66156a987bbe40
Reviewed-on: https://go-review.googlesource.com/20818
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Don't write back parts of a slicing operation if they
are unchanged from the source of the slice. For example:
x.s = x.s[0:5] // don't write back pointer or cap
x.s = x.s[:5] // don't write back pointer or cap
x.s = x.s[:5:7] // don't write back pointer
There is more to be done here, for example:
x.s = x.s[:len(x.s):7] // don't write back ptr or len
This CL can't handle that one yet.
Fixes#14855
Change-Id: Id1e1a4fa7f3076dc1a76924a7f1cd791b81909bb
Reviewed-on: https://go-review.googlesource.com/20954
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Allow inlining of functions with switch statements as long as they don't
contain a break or type switch.
Fixes#13071
Change-Id: I057be351ea4584def1a744ee87eafa5df47a7f6d
Reviewed-on: https://go-review.googlesource.com/20824
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
An instruction consisting of all 0s causes an illegal instruction
signal on s390x. Since 0s are the default in this test this CL just
makes it explicit.
Change-Id: Id6e060eed1a588f4b10a4e4861709fcd19b434ac
Reviewed-on: https://go-review.googlesource.com/20962
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Consider functions with an ODCLCONST for inlining and modify exprfmt to
ignore those nodes when exporting. Don't add symbols to the export list
if there is no definition. This occurs when OLITERAL symbols are looked
up via Pkglookup for non-exported symbols.
Fixes#7655
Change-Id: I1de827850f4c69e58107447314fe7433e378e069
Reviewed-on: https://go-review.googlesource.com/20773
Run-TryBot: Todd Neal <todd@tneal.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The biggest change is that each test is now responsible for managing
the starting and stopping of its parallel subtests.
The "Main" test could be run as a tRunner as well. This shows that
the introduction of subtests is merely a generalization of and
consistent with the current semantics.
Change-Id: Ibf8388c08f85d4b2c0df69c069326762ed36a72e
Reviewed-on: https://go-review.googlesource.com/18893
Reviewed-by: Russ Cox <rsc@golang.org>
Make sure we don't generate write barriers in runtime
code that is marked to forbid write barriers.
Implement the optimization that if we're writing a sliced
slice back to the location it came from, we don't need a
write barrier.
Fixes#14784
Change-Id: I04b6a3b2ac303c19817e932a36a3b006de103aaa
Reviewed-on: https://go-review.googlesource.com/20791
Reviewed-by: Austin Clements <austin@google.com>
This should probably be considered "experimental" at this stage, but
what it needs is feedback from adventurous adopters. I think the data
structure used for describing escape reasons might be extendable to
allow a cleanup of the underlying algorithms, which suffers from
insufficiently separated concerns (the graph does not deal well with
escape level adjustments, so it is augmented by a second custom-walk
portion of the "flood" phase. It would be better to put it all,
including level adjustments, in a single graph structure, and then
simply flood the graph.
Tweaked to avoid allocations in the no-logging case.
Modified run.go to ignore lines with leading "#" in the output (since
it can never match a line), and in -update_errors to ignore leading
tabs in output lines and to normalize embedded filenames.
Currently requires -m -m because otherwise the noise/update
burden for the other escape tests is considerable.
There is a partial test. Existing escape analysis tests seem to
cover all except the panic case and what looks like it might be
unreachable code in escape analysis.
Fixes#10526.
Change-Id: I2524fdec54facae48b00b2548e25d9e46fcaf832
Reviewed-on: https://go-review.googlesource.com/18041
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Keep track of how many uses each Value has. Each appearance in
Value.Args and in Block.Control counts once.
The number of uses of a value is generically useful to
constrain rewrite rules. For instance, we might want to
prevent merging index operations into loads if the same
index expression is used lots of times.
But I have one use in particular for which the use count is required.
We must make sure we don't combine ops with loads if the load has
more than one use. Otherwise, we may split a single load
into multiple loads and that breaks perceived behavior in
the presence of races. In particular, the load of m.state
in sync/mutex.go:Lock can't be done twice. (I have a separate
CL which triggers the mutex failure. This CL has a test which
demonstrates a similar failure.)
Change-Id: Icaafa479239f48632a069d0c3f624e6ebc6b1f0e
Reviewed-on: https://go-review.googlesource.com/20790
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Todd Neal <todd@tneal.org>
Receiver parameters generally aren't relevant to the function
signature type. In particular:
1. When checking whether a type's method implements an interface's
method, we specifically want to ignore the receiver parameters,
because they'll be different.
2. When checking interface type equality, interface methods always
use the same "fakethis" *struct{} type as their receiver.
3. Finally, method expressions and method values degenerate into
receiver-less function types.
The only case where we care about receiver types matching is in
addmethod, which is easily handled by adding an extra Eqtype check of
the receiver parameters. Also, added a test for this, since
(surprisingly) there weren't any.
As precedence, go/types.Identical ignores receiver parameters when
comparing go/types.Signature values.
Notably, this allows us to slightly simplify the "implements"
function, which is used for checking whether type/interface t
implements interface iface. Currently, cmd/compile actually works
around Eqtype's receiver parameter checking by creating new throwaway
TFUNC Types without the receiver parameter.
(Worse, the compiler currently only provides APIs to build TFUNC Types
from Nod syntax trees, so building those throwaway types also involves
first building throwaway syntax trees.)
Passes toolstash -cmp.
Change-Id: Ib07289c66feacee284e016bc312e8c5ff674714f
Reviewed-on: https://go-review.googlesource.com/20602
Reviewed-by: Robert Griesemer <gri@golang.org>
Currently we generate write barriers when the right side of an
assignment is a global function. This doesn't fall into the existing
case of storing an address of a global because we haven't lowered the
function to a pointer yet.
This write barrier is unnecessary, so eliminate it.
Fixes#13901.
Change-Id: Ibc10e00a8803db0fd75224b66ab94c3737842a79
Reviewed-on: https://go-review.googlesource.com/20772
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Step 2 of stream-lining parameter parsing
- do parameter validity checks in parser
- two passes instead of multiple (and theoretically quadratic) passes
when checking parameters
- removes the need for OKEY and some ONONAME nodes in those passes
This removes allocation of ~123K OKEY (incl. some ONONAME) nodes
out of a total of ~10M allocated nodes when running make.bash, or
a reduction of the number of alloacted nodes by ~1.2%.
Change-Id: I4a8ec578d0ee2a7b99892ac6b92e56f8e0415f03
Reviewed-on: https://go-review.googlesource.com/20748
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Robert Griesemer <gri@golang.org>
* Refacts a bit saving and restoring parents restrictions
* Shaves ~100k from pkg/tools/linux_amd64,
but most of the savings come from the rewrite rules.
* Improves on the following artificial test case:
func f1(a4 bool, a6 bool) bool {
return a6 || (a6 || (a6 || a4)) || (a6 || (a4 || a6 || (false || a6)))
}
Change-Id: I714000f75a37a3a6617c6e6834c75bd23674215f
Reviewed-on: https://go-review.googlesource.com/20306
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Removes an intermediate layer of functions that was clogging up a
corner of the compiler's profile graph.
I can't measure a performance improvement running a large build
like jujud, but the profile reports less total time spent in
gc.(*lexer).getr.
Change-Id: I3000585cfcb0f9729d3a3859e9023690a6528591
Reviewed-on: https://go-review.googlesource.com/20565
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In addition to reflect.Value.Call, exported methods can be invoked
by the Func value in the reflect.Method struct. This CL has the
compiler track what functions get access to a legitimate reflect.Method
struct by looking for interface calls to either of:
Method(int) reflect.Method
MethodByName(string) (reflect.Method, bool)
This is a little overly conservative. If a user implements a type
with one of these methods without using the underlying calls on
reflect.Type, the linker will assume the worst and include all
exported methods. But it's cheap.
No change to any of the binary sizes reported in cl/20483.
For #14740
Change-Id: Ie17786395d0453ce0384d8b240ecb043b7726137
Reviewed-on: https://go-review.googlesource.com/20489
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The location of VARDEFs is incorrect for PPARAMOUT variables
which are also used as temporary locations. We put in VARDEFs
when setting the variable at return time, but when the location
is also used as a temporary the lifetime values are wrong.
Fix copyelim to update the names map properly. This is a
real name bug fix which, as a result, allows me to
write a reasonable test to trigger the PPARAMOUT bug.
This is kind of a band-aid fix for #14591. A more pricipled
fix (which allows values to be stored in the return variable
earlier than the return point) will be harder.
Fixes#14591
Change-Id: I7df8ae103a982d1f218ed704c080d7b83cdcfdd9
Reviewed-on: https://go-review.googlesource.com/20457
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Make sure we do any just-before-return cleanup on all paths out of a
function, including when recovering. Each exit path should include
deferreturn (if there are any defers) and then the exit
code (e.g. copying heap-escaping return values back to the stack).
Introduce a Defer SSA block type which has two outgoing edges - one the
fallthrough edge (the defer was queued successfully) and one which
immediately returns (the defer had a successful recover() call and
normal execution should resume at the return point).
Fixes#14725
Change-Id: Iad035c9fd25ef8b7a74dafbd7461cf04833d981f
Reviewed-on: https://go-review.googlesource.com/20486
Reviewed-by: David Chase <drchase@google.com>
In increment and decrement statements, explicit check that the type
of operand is numeric earlier. This avoids a related but less clear
error about converting "1" to be emitted.
So, when compiling
package main
func main() {
var x bool
x++
}
instead of emitting two errors
prog.go:5: cannot convert 1 to type bool
prog.go:5: invalid operation: x++ (non-numeric type bool)
just emits the second error.
Fixes#12525.
Change-Id: I6e81330703765bef0d6eb6c57098c1336af7c799
Reviewed-on: https://go-review.googlesource.com/20245
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The new check corresponds to the (etype != TANY || Debug['A'] != 0)
that was lost in golang.org/cl/19936.
Fixes#14652.
Change-Id: Iec3788ff02529b3b0f0d4dd92ec9f3ef20aec849
Reviewed-on: https://go-review.googlesource.com/20271
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When the linker was written in C, command line arguments were passed
around as null-terminated byte arrays which encouraged checking
characters one at a time. In Go, that can easily lead to
out-of-bounds panics.
Use the more idiomatic strings.HasPrefix when checking cmd/link's -B
argument to avoid the panic, and replace the manual hex decode with
use of the encoding/hex package.
Fixes#14636
Change-Id: I45f765bbd8cf796fee1a9a3496178bf76b117827
Reviewed-on: https://go-review.googlesource.com/20211
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The changes to internal/big are completely automatic
by running vendor.bash in that directory.
Also added respective test case.
For #14553.
Change-Id: I98b124bcc9ad9e9bd987943719be27864423cb5d
Reviewed-on: https://go-review.googlesource.com/20199
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Static branch predictions (which guide block ordering) are
adjusted based on:
loop/not-loop (favor looping)
abnormal-exit/not (avoid panic)
call/not-call (avoid call)
ret/default (treat returns as rare)
This appears to make no difference in performance of real
code, meaning the compiler itself. The earlier version of
this has been stripped down to help make the cost of this
only-aesthetic-on-Intel phase be as cheap as possible (we
probably want information about inner loops for improving
register allocation, but because register allocation follows
close behind this pass, conceivably the information could be
reused -- so we might do this anyway just to normalize
output).
For a ./make.bash that takes 200 user seconds, about .75
second is reported in likelyadjust (summing nanoseconds
reported with -d=ssa/likelyadjust/time ).
Upstream predictions are respected.
Includes test, limited to build on amd64 only.
Did several iterations on the debugging output to allow
some rough checks on behavior.
Debug=1 logging notes agree/disagree with earlier passes,
allowing analysis like the following:
Run on make.bash:
GO_GCFLAGS=-d=ssa/likelyadjust/debug \
./make.bash >& lkly5.log
grep 'ranch prediction' lkly5.log | wc -l
78242 // 78k predictions
grep 'ranch predi' lkly5.log | egrep -v 'agrees with' | wc -l
29633 // 29k NEW predictions
grep 'disagrees' lkly5.log | wc -l
444 // contradicted 444 times
grep '< exit' lkly5.log | wc -l
10212 // 10k exit predictions
grep '< exit' lkly5.log | egrep 'disagrees' | wc -l
5 // 5 contradicted by previous prediction
grep '< exit' lkly5.log | egrep -v 'agrees' | wc -l
702 // 702-5 redundant with previous prediction
grep '< call' lkly5.log | egrep -v 'agrees' | wc -l
16699 // 16k new call predictions
grep 'stay in loop' lkly5.log | egrep -v 'agrees' | wc -l
3951 // 4k new "remain in loop" predictions
Fixes#11451.
Change-Id: Iafb0504f7030d304ef4b6dc1aba9a5789151a593
Reviewed-on: https://go-review.googlesource.com/19995
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
* It does very simple bounds checking elimination. E.g.
removes the second check in for i := range a { a[i]++; a[i++]; }
* Improves on the following redundant expression:
return a6 || (a6 || (a6 || a4)) || (a6 || (a4 || a6 || (false || a6)))
* Linear in the number of block edges.
I patched in CL 12960 that does bounds, nil and constant propagation
to make sure this CL is not just redundant. Size of pkg/tool/linux_amd64/*
(excluding compile which is affected by this change):
With IsInBounds and IsSliceInBounds
-this -12960 92285080
+this -12960 91947416
-this +12960 91978976
+this +12960 91923088
Gain is ~110% of 12960.
Without IsInBounds and IsSliceInBounds (older run)
-this -12960 95515512
+this -12960 95492536
-this +12960 95216920
+this +12960 95204440
Shaves 22k on its own.
* Can we handle IsInBounds better with this? In
for i := range a { a[i]++; } the bounds checking at a[i]
is not eliminated.
Change-Id: I98957427399145fb33693173fd4d5a8d71c7cc20
Reviewed-on: https://go-review.googlesource.com/19710
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If a general comment contains multiple newline characters, we can't
simply unread one and then re-lex it via the general whitespace lexing
phase, because then we'll reset lineno to the line before the "*/"
marker, rather than keeping it where we found the "/*" marker.
Also, for processing imports, call importfile before advancing the
lexer with p.next(), so that lineno reflects the line where we found
the import path, and not the token afterwards.
Fixes#14520.
Change-Id: I785a2d83d632280113d4b757de0d57c88ba2caf4
Reviewed-on: https://go-review.googlesource.com/19934
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
non-SSA backends are all over the map as to whether nil checks
get removed or not. amd64, 386, 386/387, arm are all subtly different.
Remove these extra checks for now, they are in nilptr3_ssa.go so they
won't get lost.
Change-Id: I2e0051f488fb2cb7278c6fdd44cb9d68b5778345
Reviewed-on: https://go-review.googlesource.com/19961
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Just like we do for integer loads/stores.
Update #14511
Change-Id: Ic6ca6b54301438a5701ea5fb0be755451cb24d45
Reviewed-on: https://go-review.googlesource.com/19923
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Keith Randall <khr@golang.org>
Our stack frame sizes look pretty good now. Lower the stack
guard from 1024 to 720.
Tip is currently using 720.
We could go lower (to 640 at least) except PPC doesn't like that.
Change-Id: Ie5f96c0e822435638223f1e8a2bd1a1eed68e6aa
Reviewed-on: https://go-review.googlesource.com/19922
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Always reading runes (rather than bytes) has negligible overhead
(a simple if at the moment - it can be eliminated eventually) but
simplifies the lexer logic and opens up the door for speedups.
In the process remove many int conversions that are now not needed
anymore.
Also, because identifiers are now more easily recognized, remove
talph label and move identifier lexing "in place".
Also, instead of accepting all chars < 0x80 and then check for
"frogs", only permit valid characters in the first place. Removes
an extra call for common simple tokens and leads to simpler logic.
`time go build -a net/http` (best of 5 runs) seems 1% faster.
Assuming this is in the noise, there is no noticeable performance
degradation with this change.
Change-Id: I3454c9bf8b91808188cf7a5f559341749da9a1eb
Reviewed-on: https://go-review.googlesource.com/19847
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Merge push_parser and pop_parser into a single parse_import function
and inline unimportfile. Shake out function boundaries a little bit so
that the symmetry is readily visible.
Move the import_package call into parse_import (and inline
import_there into import_package). This means importfile no longer
needs to provide fake import data to be needlessly lexed/parsed every
time it's called.
Also, instead of indicating import success/failure by whether the next
token is "package", import_spec can just check whether importpkg is
non-nil.
Tangentially, this somehow alters the diagnostics produced for
test/fixedbugs/issue11610.go. However, the new diagnostics are more
consistent with those produced when the empty import statement is
absent, which seems more desirable than maintaining the previous
errors.
Change-Id: I5cd1c22aa14da8a743ef569ff084711d137279d5
Reviewed-on: https://go-review.googlesource.com/19650
Reviewed-by: Robert Griesemer <gri@golang.org>
Walking the field name as if it were an expression
caused a called to haspointers with a TFIELD, which panics.
Trigger was a field at a large offset within a large struct,
combined with a struct literal expression mentioning that
field.
Fixes#14405
Change-Id: I4589badae27cf3d7cf365f3a66c13447512f41f9
Reviewed-on: https://go-review.googlesource.com/19699
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The Go 1.6 release notes say we'll remove the “-X name value” form
(in favor of the “-X name=value” form) in Go 1.7.
Do that.
Also establish the doc/go1.7.txt file.
Change-Id: Ie4565a6bc5dbcf155181754d8d92bfbb23c75338
Reviewed-on: https://go-review.googlesource.com/19614
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This bug was introduced in golang.org/cl/18217,
while trying to fix#13777.
Originally I wanted to just disable inlining for the case
being handled incorrectly, but it's fairly difficult to detect
and much easier just to fix. Since the case being handled
incorrectly was inlined correctly in Go 1.5, not inlining it
would also be somewhat of a regression.
So just fix it.
Test case copied from Ian's CL 19520.
The mistake to worry about in this CL would be relaxing
the condition too much (we now print the note more often
than we did yesterday). To confirm that we'd catch this mistake,
I checked that changing (!fmtbody || !t.Funarg) to (true) does
cause fixedbugs/issue13777.go to fail. And putting it back
to what is written in this CL makes that test pass again
as well as the new fixedbugs/issue14331.go.
So I believe that the new condition is correct for both constraints.
Fixes#14331.
Change-Id: I91f75a4d5d07c53af5caea1855c780d9874b8df6
Reviewed-on: https://go-review.googlesource.com/19514
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Type switches need write barriers if the written-to
variable is heap allocated.
For the added needwritebarrier call, the right arg doesn't
really matter, I just pass something that will never disqualify
the write barrier. The left arg is the one that matters.
Fixes#14306
Change-Id: Ic2754167cce062064ea2eeac2944ea4f77cc9c3b
Reviewed-on: https://go-review.googlesource.com/19481
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Semi-regular merge from tip to dev.ssa.
Two fixes:
1) Mark selectgo as not returning. This caused problems
because there are no VARKILL ops on the selectgo path,
causing things to be marked live that shouldn't be.
2) Tell the amd64 assembler that addressing modes like
name(SP)(AX*4) are ok.
Change-Id: I9ca81c76391b1a65cc47edc8610c70ff1a621913
It is one of the slowest compiler phases right now, and we
run two of them.
Instead of using a map to make the initial partition, use a sort.
It is much less memory intensive.
Do a few optimizations to avoid work for size-1 equivalence classes.
Implement -N.
Change-Id: I1d2d85d3771abc918db4dd7cc30b0b2d854b15e1
Reviewed-on: https://go-review.googlesource.com/19024
Reviewed-by: David Chase <drchase@google.com>
Empty blocks are introduced to remove critical edges.
After regalloc, we can remove any of the added blocks
that are still empty.
Change-Id: I0b40e95ac3a6cc1e632a479443479532b6c5ccd9
Reviewed-on: https://go-review.googlesource.com/18833
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Consider this code:
func f(*int)
func g() {
p := new(int)
f(p)
}
where f is an assembly function.
In general liveness analysis assumes that during the call to f, p is dead
in this frame. If f has retained p, p will be found alive in f's frame and keep
the new(int) from being garbage collected. This is all correct and works.
We use the Go func declaration for f to give the assembly function
liveness information (the arguments are assumed live for the entire call).
Now consider this code:
func h1() {
p := new(int)
syscall.Syscall(1, 2, 3, uintptr(unsafe.Pointer(p)))
}
Here syscall.Syscall is taking the place of f, but because its arguments
are uintptr, the liveness analysis and the garbage collector ignore them.
Since p is no longer live in h once the call starts, if the garbage collector
scans the stack while the system call is blocked, it will find no reference
to the new(int) and reclaim it. If the kernel is going to write to *p once
the call finishes, reclaiming the memory is a mistake.
We can't change the arguments or the liveness information for
syscall.Syscall itself, both for compatibility and because sometimes the
arguments really are integers, and the garbage collector will get quite upset
if it finds an integer where it expects a pointer. The problem is that
these arguments are fundamentally untyped.
The solution we have taken in the syscall package's wrappers in past
releases is to insert a call to a dummy function named "use", to make
it look like the argument is live during the call to syscall.Syscall:
func h2() {
p := new(int)
syscall.Syscall(1, 2, 3, uintptr(unsafe.Pointer(p)))
use(unsafe.Pointer(p))
}
Keeping p alive during the call means that if the garbage collector
scans the stack during the system call now, it will find the reference to p.
Unfortunately, this approach is not available to users outside syscall,
because 'use' is unexported, and people also have to realize they need
to use it and do so. There is much existing code using syscall.Syscall
without a 'use'-like function. That code will fail very occasionally in
mysterious ways (see #13372).
This CL fixes all that existing code by making the compiler do the right
thing automatically, without any code modifications. That is, it takes h1
above, which is incorrect code today, and makes it correct code.
Specifically, if the compiler sees a foreign func definition (one
without a body) that has uintptr arguments, it marks those arguments
as "unsafe uintptrs". If it later sees the function being called
with uintptr(unsafe.Pointer(x)) as an argument, it arranges to mark x
as having escaped, and it makes sure to hold x in a live temporary
variable until the call returns, so that the garbage collector cannot
reclaim whatever heap memory x points to.
For now I am leaving the explicit calls to use in package syscall,
but they can be removed early in a future cycle (likely Go 1.7).
The rule has no effect on escape analysis, only on liveness analysis.
Fixes#13372.
Change-Id: I2addb83f70d08db08c64d394f9d06ff0a063c500
Reviewed-on: https://go-review.googlesource.com/18584
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Brief background on "why heap allocate". Things can be
forced to the heap for the following reasons:
1) address published, hence lifetime unknown.
2) size unknown/too large, cannot be stack allocated
3) multiplicity unknown/too large, cannot be stack allocated
4) reachable from heap (not necessarily published)
The bug here is a case of failing to enforce 4) when an
object Y was reachable from a heap allocation X forced
because of 3). It was found in the case of a closure
allocated within a loop (X) and assigned to a variable
outside the loop (multiplicity unknown) where the closure
also captured a map (Y) declared outside the loop (reachable
from heap). Note the variable declared outside the loop (Y)
is not published, has known size, and known multiplicity
(one). The only reason for heap allocation is that it was
reached from a heap allocated item (X), but because that was
not forced by publication, it has to be tracked by loop
level, but escape-loop level was not tracked and thus a bug
results.
The fix is that when a heap allocation is newly discovered,
use its looplevel as the minimum loop level for downstream
escape flooding.
Every attempt to generalize this bug to X-in-loop-
references-Y-outside loop succeeded, so the fix was aimed
to be general. Anywhere that loop level forces heap
allocation, the loop level is tracked. This is not yet
tested for all possible X and Y, but it is correctness-
conservative and because it caused only one trivial
regression in the escape tests, it is probably also
performance-conservative.
The new test checks the following:
1) in the map case, that if fn escapes, so does the map.
2) in the map case, if fn does not escape, neither does the map.
3) in the &x case, that if fn escapes, so does &x.
4) in the &x case, if fn does not escape, neither does &x.
Fixes#13799.
Change-Id: Ie280bef2bb86ec869c7c206789d0b68f080c3fdb
Reviewed-on: https://go-review.googlesource.com/18234
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Adding the evconst(n) call for OANDAND and OOROR in
golang.org/cl/18262 was originally just to parallel the above iscmp
branch, but upon further inspection it seemed odd that removing it
caused test/fixedbugs/issue6671.go's
var b mybool
// ...
b = bool(true) && true // ERROR "cannot use"
to start failing (i.e., by not emitting the expected "cannot use"
error).
The problem is that evconst(n)'s settrue and setfalse paths always
reset n.Type to idealbool, even for logical operators where n.Type
should preserve the operand type. Adding the evconst(n) call for
OANDAND/OOROR inadvertantly worked around this by turning the later
evconst(n) call at line 2167 into a noop, so the "n.Type = t"
assignment at line 739 would preserve the operand type.
However, that means evconst(n) was still clobbering n.Type for ONOT,
so declarations like:
const _ bool = !mybool(true)
were erroneously accepted.
Update #13821.
Change-Id: I18e37287f05398fdaeecc0f0d23984e244f025da
Reviewed-on: https://go-review.googlesource.com/18362
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
We don't use these for benchmarking anymore.
Now we have the go1 dir and the benchmarks subrepo.
Some have problematic copyright notices, so move out of main repo.
Preserved in golang.org/x/exp/shootout.
Fixes#12688.
Fixes#13584.
Change-Id: Ic0b71191ca1a286d33d7813aca94bab1617a1c82
Reviewed-on: https://go-review.googlesource.com/18320
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Added a format option to inhibit output of .Note field in
printing, and enabled that option during export.
Added test.
Fixes#13777.
Change-Id: I739f9785eb040f2fecbeb96d5a9ceb8c1ca0f772
Reviewed-on: https://go-review.googlesource.com/18217
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: David Chase <drchase@google.com>
The test for non-package main top-level inputs is done while parsing
the export data. Issue #13468 happened because we were not parsing
the export data when using compiler-generated archives
(that is, when using go tool compile -pack).
Fix this by parsing the export data even for archives.
However, that turns up a different problem: the export data check
reports (one assumes spurious) skew errors now, because it has
not been run since Go 1.2.
(Go 1.3 was the first release to use go tool compile -pack.)
Since the code hasn't run since Go 1.2, it can't be that important.
Since it doesn't work today, just delete it.
Figuring out how to make this code work with Robert's export
format was one of the largest remaining TODOs for that format.
Now we don't have to.
Fixes#13468 and makes the world a better place.
Change-Id: I40a4b284cf140d49d48b714bd80762d6889acdb9
Reviewed-on: https://go-review.googlesource.com/17976
Reviewed-by: Robert Griesemer <gri@golang.org>
Fixes#12411.
Change-Id: I2202a754c7750e3b2119e3744362c98ca0d2433e
Reviewed-on: https://go-review.googlesource.com/17818
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Another (historic) artifact due to partially resolving symbols too early.
Fixes#13539.
Change-Id: Ie720c491cfa399599454f384b3a9735e75d4e8f1
Reviewed-on: https://go-review.googlesource.com/17600
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Damien Neil <dneil@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Following an empty import, a declaration involving a ? symbol
generates an internal compiler error when the name of the
symbol (in newname function).
package a
import""
var?
go.go:2: import path is empty
go.go:3: internal compiler error: newname nil
Make sure dclname is not called when the symbol is nil.
The error message is now:
go.go:2: import path is empty
go.go:3: invalid declaration
go.go:4: syntax error: unexpected EOF
This CL was initially meant to be applied to the old parser,
and has been updated to apply to the new parser.
Fixes#11610
Change-Id: I75e07622fb3af1d104e3a38c89d9e128e3b94522
Reviewed-on: https://go-review.googlesource.com/15268
Reviewed-by: Russ Cox <rsc@golang.org>
The following code:
func n() {(interface{int})}
generates:
3: interface contains embedded non-interface int
3: type %!v(PANIC=runtime error: invalid memory address or nil pointer dereference) is not an expression
It is because the corresponding symbol (Sym field in Type object)
is nil, resulting in a panic in typefmt.
Just skip the symbol if it is nil, so that the error message becomes:
3: interface contains embedded non-interface int
3: type interface { int } is not an expression
Fixes#11614
Change-Id: I219ae7eb01edca264fad1d4a1bd261d026294b00
Reviewed-on: https://go-review.googlesource.com/14015
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
The build tags are necessary to keep "go build" in that directory
building only stdio.go, but we have to arrange for test/run.go to
treat them as satisfied.
Fixes#12625.
Change-Id: Iec0cb2fdc2c9b24a4e0530be25e940aa0cc9552e
Reviewed-on: https://go-review.googlesource.com/17454
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Move test for isblank into addmethod so that most of the type checking
for methods is also performed for blank methods.
Fixes#11366.
Change-Id: I13d554723bf96d906d0b3ff390d7b7c87c1a5020
Reviewed-on: https://go-review.googlesource.com/16866
Reviewed-by: Robert Griesemer <gri@golang.org>
- use same local variable name (lno) for line number for LCOLAS everywhere
- remove now unneeded assignment of line number to yylval.i in lexer
Fix per suggestion of mdempsky.
Fixes#13415.
Change-Id: Ie3c7f5681615042a12b81b26724b3a5d8a979c25
Reviewed-on: https://go-review.googlesource.com/17248
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This is a bit ugly but it's a useful test. Run go install -buildmode=shared std
and then go run run.go -linkshared (it passes on linux/amd64).
Change-Id: I5684c79cd03817fa1fc399788b7320f8535c08da
Reviewed-on: https://go-review.googlesource.com/16343
Reviewed-by: Russ Cox <rsc@golang.org>
Josh Bleecher Snyder
Ilya Tocar
Lynn Boger
Ben Shi
Cherry Zhang
Michael Munday
Giovanni Bajo
Alberto Donizetti
Robert Griesemer
Matthew Dempsky
Keith Randall
Daniel Martí
isharipo
Bryan Chan
Vladimir Kuzmin
Geoff Berry
Tobias Klauser
Austin Clements
Kunpei Sakai
ChrisALiles
Wei Xiao
Balaram Makam
Keith Randall
Ian Lance Taylor
Emmanuel Odeke
Than McIntosh
Russ Cox
Keith Randall
David Chase
Hugues Bruant
Martin Möhrmann
Dhananjay Nakrani
Anfernee Yongkun Gui
Cholerae Hu
Kashav Madan
Gabríel Arthúr Pétursson
David Lazar
Todd Neal
Filip Gruszczynski
张嵩
Brad Fitzpatrick
Jason Travis
Philip Hofer
khr
Quentin Smith
David R. Jenni
Shintaro Kaneko
Michael Munday
Vladimir Stefanovic
Dmitri Shuralyov
Martin Möhrmann
Anthony Canino
Alan Donovan
Tal Shprecher
Wedson Almeida Filho
Trey Lawrence
Jan Mercl
David Crawshaw
Konstantin Shaposhnikov
Cherry Zhang
Zhongwei Yao
Alexandru Moșoi
Alexandru Moșoi
Richard Miller
Caio Marcelo de Oliveira Filho
Eric Engestrom
Marcel van Lohuizen
Rhys Hiltner
Gerrit Code Review
Kevin Vu
Shenghou Ma
Didier Spezia
Håvard Haugen
Michael Hudson-Doyle