Defaulting total to 1 for each function, adds up to the
counting error. testing/cover.go already does this once.
Fixes#20515
Change-Id: I0e3f524c2ccb628eb9a8f0a1f81c22365c24cf9a
Reviewed-on: https://go-review.googlesource.com/44337
Run-TryBot: Dhananjay Nakrani <dhananjayn@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Arguments to inlined calls are hidden from setPos as follows:
args := as.Rlist
as.Rlist.Set(nil)
// setPos...
as.Rlist.Set(args.Slice())
Previously, this code had no effect since the value of as was
overwritten by the assignment in the retvars loop.
Fixes#19799.
Change-Id: Iaf97259f82fdba8b236136337cc42b2774c7fef5
Reviewed-on: https://go-review.googlesource.com/44351
Run-TryBot: David Lazar <lazard@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
The test no longer passes as of https://golang.org/cl/43777, which
intentionally disables the feature that this test was checking for.
Nobody noticed since the test is not run in -short mode.
Updates #20435.
Change-Id: I64f37fd94c01f22ead88470b6d9bfe8a151ddb1c
Reviewed-on: https://go-review.googlesource.com/44650
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
Apply the fix in CL 44355 to MIPS.
ARM64 has these rules but commented out for performance reason.
Fix the commented rules, in case they are enabled in the future.
Enhance the test so it triggers the failure on ARM and MIPS without
the fix.
Updates #20530.
Change-Id: I82d77448e3939a545fe519d0a29a164f8fa5417c
Reviewed-on: https://go-review.googlesource.com/44430
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This should help narrowing down the possible cause of #20514.
Updates #20514.
Change-Id: Ie997400c9749aace7783bd585b23dbb4cefc181d
Reviewed-on: https://go-review.googlesource.com/44375
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Replacing byteload-of-bytestore-of-x with x is incorrect
when x contains a larger-than-byte value (and so on for
16 and 32-bit load/store pairs). Replace "x" with the
appropriate zero/sign extension of x, which if unnecessary
will be repaired by other rules.
Made logic for arm match x86 and amd64; yields minor extra
optimization, plus I am (much) more confident it's correct,
despite inability to reproduce bug on arm.
Ppc64 lacks this optimization, hence lacks this problem.
See related https://golang.org/cl/37154/Fixes#20530.
Change-Id: I6af9cac2ad43bee99cafdcb04725ce7e55a43323
Reviewed-on: https://go-review.googlesource.com/44355
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Replaced ../gc/reflect.c with
cmd/compile/internal/gc/reflect.go.
Fixes#20525
Change-Id: Ibafd36ea446ace5c677df27873a4bbf716a0a9bc
Reviewed-on: https://go-review.googlesource.com/44376
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Vet returns with a nonzero exit for all possible messages in the
buildtag check. However for this file:
//+buildlinux
package main
vet returns a zero exit status:
$ go vet main.go
demo.go:1: possible malformed +build comment
$ echo $?
0
This CL sets the exit status to non zero for the remaining messages in
the buildtag check.
Change-Id: Ia2c35ebc3ec5ac311d2a0295b5b9fdd997a85726
Reviewed-on: https://go-review.googlesource.com/44371
Reviewed-by: Rob Pike <r@golang.org>
In preparation for CL 41770, upgrade .debug_info to DWARF4, and emit
DW_AT_frame_base on subprograms. This should make no semantic
difference.
Also fix a long-standing bug/inconsistency in puttattr: it didn't
add the addend to ref_addrs. Previously this didn't matter because it
was only used for types, but now it's used for section offsets into
symbols that have multiple entries.
RELNOTE=yes
Change-Id: Ib10654ac92edfa29c5167c44133648151d70cf76
Reviewed-on: https://go-review.googlesource.com/44210
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
It is expected to test assembly code for ARMv5, ARMv6 and ARMv7
in cmd/asm/internal/asm/endtoend_test.go. But actually the loop
in "func TestARMEndToEnd(t *testing.T)" runs three times all
for ARMv5.
This patch fixes that bug and adds a new armv6.s which is only tested
with GOARM=6.
fixes#20465
Change-Id: I5dbf00809a47ace2c195335e2c9bdd768479aada
Reviewed-on: https://go-review.googlesource.com/43930
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
"ADDF F0, R1, F2" is silently accepted by the arm assembler and
assembled to the same binary code of "ADDF F0, F1, F2". So does
"CMPF F0, R1".
"ABSF F0, F1, F2" is also silently accepted and assembled to a
different instruction.
This patch reports those illegal forms and adds test cases.
fix#20464
Change-Id: I88b80dc29de24c6266ac7bf7bce1578c5adbc68c
Reviewed-on: https://go-review.googlesource.com/43931
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
We weren't setting r0 to 0, as required by our generated code.
Before this patch, the misc/cgo/testcarchive tests failed on ppc64le.
After this patch, they work, so enable them.
Change-Id: I53b16746961da9f7c34f59030a1e40953c9c1e05
Reviewed-on: https://go-review.googlesource.com/44093
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Test that we really do move spills down to the dominator of
all the uses.
Also add a test where go1.8 would have moved the spill out of
the loop into two exit points, but go1.9 doesn't move the spill.
This is a case where the 1.9 spill moving code does not subsume
the 1.8 spill moving code.
Maybe we resurrect moving-spills-out-of-loops CL to fix this one.
(I suspect it wouldn't be worth the effort, but would be happy
to hear evidence otherwise.)
Update #20472
Change-Id: I7dbf8d65e7f4d675d14e5ecf502887cebda35d2a
Reviewed-on: https://go-review.googlesource.com/44038
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This is one hurdle to building Go on Android; the runtime does
not build properly because *_linux.go files are excluded from
the "Building go_bootstrap" step when GOOS=android.
There are other hurdles; this is the first one.
Change-Id: I766e4bbf6ffc0d273888913f2516cf3e995a1786
Reviewed-on: https://go-review.googlesource.com/38308
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Current code cannot handle string #define macros if those macros are
defined via other macros. This CL solve the issue.
Updates #18720
Change-Id: Ibed0773d10db3d545bb246b97e81c0d19e3af3d5
Reviewed-on: https://go-review.googlesource.com/41312
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Now:
$ GOARCH=arm GOARM=5 go install -x cmd/go
... followed by:
$ GOARCH=arm GOARM= go install -x cmd/go
... actually does work. Previously the second "go install" would reuse
the cached binaries from the GOARM=5 command and not rebuild.
(Or vice versa from GOARM= to GOARM=5)
And do the same for GO386.
Fixes#9737
Change-Id: I9630aab34d06465d5033e6743dfe6592c8247aa0
Reviewed-on: https://go-review.googlesource.com/43855
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Due to the fact that -cover injects additional code to the original
source, tests run with -cover will often have incorrect line numbers.
Also includes docs for -list regexp missed by ba8ff87
Updates #6329
Change-Id: I87f0618ac31e96071bca61055cc17c0cbdee208a
Reviewed-on: https://go-review.googlesource.com/38640
Reviewed-by: Rob Pike <r@golang.org>
Many instructions can not have a .S suffix, such as MULS, SWI, CLZ,
CMP, STREX and others. And so do .P and .W suffixes. Even wrong
assembly code is generated for some instructions with invalid
suffixes.
This patch tries to simplify .S/.W/.P checks. And a wrong assembly
test for arm is added.
fixes#20377
Change-Id: Iba1c99d9e6b7b16a749b4d93ca2102e17c5822fe
Reviewed-on: https://go-review.googlesource.com/43561
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Instead of just printing the value, print the original node to make the
error more human-friendly. Also print the value if its string form is
different than the original node, to make sure it's obvious what value
was duplicated.
This means that "case '@', '@':", which used to print:
duplicate case 64 in switch
Will now print:
duplicate case '@' (value 64) in switch
Factor this logic out into its own function to reuse it in range cases
and any other place where we might want to print a node and its value in
the future.
Also needed to split the errorcheck files because expression switch case
duplicates are now detected earlier, so they stop the compiler before it
gets to generating the AST and detecting the type switch case
duplicates.
Fixes#20112.
Change-Id: I9009b50dec0d0e705e5de9c9ccb08f1dce8a5a99
Reviewed-on: https://go-review.googlesource.com/41852
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TestScopeRanges has been added in CL 40095. This
test is failing on Plan 9 because executables don't
have a DWARF symbol table.
Fixes#20418.
Change-Id: I6dd3baa636998134ccd042203c8b5c3199a4d6e1
Reviewed-on: https://go-review.googlesource.com/43670
Run-TryBot: David du Colombier <0intro@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Change compiler and linker to emit DWARF lexical blocks in .debug_info
section when compiling with -N -l.
Version of debug_info is updated from DWARF v2 to DWARF v3 since
version 2 does not allow lexical blocks with discontinuous PC ranges.
Remaining open problems:
- scope information is removed from inlined functions
- variables records do not have DW_AT_start_scope attributes so a
variable will shadow other variables with the same name as soon as its
containing scope begins, even before its declaration.
Updates #6913.
Updates #12899.
Change-Id: Idc6808788512ea20e7e45bcf782453acb416fb49
Reviewed-on: https://go-review.googlesource.com/40095
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
The writebarrier pass processes WB ops from beginning to end,
replacing them by other values.
But it also checks whether there are more ops to process
by walking from beginning to end.
This is quadratic, so walk from end to beginning instead.
This speeds up compiling the code in issue 13554:
name old time/op new time/op delta
Pkg 11.9s ± 2% 8.3s ± 3% -29.88% (p=0.000 n=18+17)
Updates #13554
Passes toolstash-check.
Change-Id: I5f8a872ddc4b783540220d89ea2ee188a6d2b2ff
Reviewed-on: https://go-review.googlesource.com/43571
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
SWI only support "SWI $imm", but currently "SWI (Reg)" is also
accepted. This patch fixes it.
And more instruction tests are added to cmd/asm/internal/asm/testdata/arm.s
fixes#20375
Change-Id: Id437d853924a403e41da9b6cbddd20d994b624ff
Reviewed-on: https://go-review.googlesource.com/43552
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Second attempt to fix#14710.
CL 35272 already tried to fix this issue. But CL 35272 assumed
that runtime.epclntab type is STEXT, while it is actually SRODATA.
This CL uses Symbol.Sect.Seg to determine if symbol is part
of Segtext or Segdata.
Fixes#14710
Change-Id: Ic6b6f657555c87a64d2bc36cc4c07ab0591d00c4
Reviewed-on: https://go-review.googlesource.com/42390
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
fuseBlockPlain was accidentally quadratic.
If you had plain blocks b1 -> b2 -> b3 -> b4,
each containing single values v1, v2, v3, and v4 respectively,
fuseBlockPlain would move v1 from b1 to b2 to b3 to b4,
then v2 from b2 to b3 to b4, etc.
There are two obvious fixes.
* Look for runs of blocks in fuseBlockPlain
and handle them in a single go.
* Fuse from end to beginning; any given value in a run
of blocks to fuse then moves only once.
The latter is much simpler, so that's what this CL does.
Somewhat surprisingly, this change does not pass toolstash-check.
The resulting set of blocks is the same,
and the values in them are the same,
but the order of values in them differ,
and that order of values (while arbitrary)
is enough to change the compiler's output.
This may be due to #20178; deadstore is the next pass after fuse.
Adding basic sorting to the beginning of deadstore
is enough to make this CL pass toolstash-check:
for _, b := range f.Blocks {
obj.SortSlice(b.Values, func(i, j int) bool { return b.Values[i].ID < b.Values[j].ID })
}
Happily, this CL appears to result in better code on average,
if only by accident. It cuts 4k off of cmd/go; go1 benchmarks
are noisy as always but don't regress (numbers below).
No impact on the standard compilebench benchmarks.
For the code in #13554, this speeds up compilation dramatically:
name old time/op new time/op delta
Pkg 53.1s ± 2% 12.8s ± 3% -75.92% (p=0.008 n=5+5)
name old user-time/op new user-time/op delta
Pkg 55.0s ± 2% 14.9s ± 3% -73.00% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
Pkg 2.04GB ± 0% 2.04GB ± 0% +0.18% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
Pkg 6.21M ± 0% 6.21M ± 0% ~ (p=0.222 n=5+5)
name old object-bytes new object-bytes delta
Pkg 28.4M ± 0% 28.4M ± 0% +0.00% (p=0.008 n=5+5)
name old export-bytes new export-bytes delta
Pkg 208 ± 0% 208 ± 0% ~ (all equal)
Updates #13554
go1 benchmarks:
name old time/op new time/op delta
BinaryTree17-8 2.29s ± 2% 2.26s ± 2% -1.43% (p=0.000 n=48+50)
Fannkuch11-8 2.74s ± 2% 2.79s ± 2% +1.63% (p=0.000 n=50+49)
FmtFprintfEmpty-8 36.6ns ± 3% 34.6ns ± 4% -5.29% (p=0.000 n=49+50)
FmtFprintfString-8 58.3ns ± 3% 59.1ns ± 3% +1.35% (p=0.000 n=50+49)
FmtFprintfInt-8 62.4ns ± 2% 63.2ns ± 3% +1.19% (p=0.000 n=49+49)
FmtFprintfIntInt-8 95.1ns ± 2% 96.7ns ± 3% +1.61% (p=0.000 n=49+50)
FmtFprintfPrefixedInt-8 118ns ± 3% 113ns ± 2% -4.00% (p=0.000 n=50+49)
FmtFprintfFloat-8 191ns ± 2% 192ns ± 2% +0.40% (p=0.034 n=50+50)
FmtManyArgs-8 419ns ± 2% 420ns ± 2% ~ (p=0.228 n=49+49)
GobDecode-8 5.26ms ± 3% 5.19ms ± 2% -1.33% (p=0.000 n=50+49)
GobEncode-8 4.12ms ± 2% 4.15ms ± 3% +0.68% (p=0.007 n=49+50)
Gzip-8 198ms ± 2% 197ms ± 2% -0.50% (p=0.018 n=48+48)
Gunzip-8 31.9ms ± 3% 31.8ms ± 3% -0.47% (p=0.024 n=50+50)
HTTPClientServer-8 64.4µs ± 0% 64.0µs ± 0% -0.55% (p=0.000 n=43+46)
JSONEncode-8 10.6ms ± 2% 10.6ms ± 3% ~ (p=0.543 n=49+49)
JSONDecode-8 43.3ms ± 3% 43.1ms ± 2% ~ (p=0.079 n=50+50)
Mandelbrot200-8 3.70ms ± 2% 3.70ms ± 2% ~ (p=0.553 n=47+50)
GoParse-8 2.70ms ± 2% 2.71ms ± 3% ~ (p=0.843 n=49+50)
RegexpMatchEasy0_32-8 70.5ns ± 4% 70.4ns ± 4% ~ (p=0.867 n=48+50)
RegexpMatchEasy0_1K-8 162ns ± 3% 162ns ± 2% ~ (p=0.739 n=48+48)
RegexpMatchEasy1_32-8 66.1ns ± 5% 66.2ns ± 4% ~ (p=0.970 n=50+50)
RegexpMatchEasy1_1K-8 297ns ± 7% 296ns ± 7% ~ (p=0.406 n=50+50)
RegexpMatchMedium_32-8 105ns ± 5% 105ns ± 5% ~ (p=0.702 n=50+50)
RegexpMatchMedium_1K-8 32.3µs ± 4% 32.2µs ± 3% ~ (p=0.614 n=49+49)
RegexpMatchHard_32-8 1.75µs ±18% 1.74µs ±12% ~ (p=0.738 n=50+48)
RegexpMatchHard_1K-8 52.2µs ±14% 51.3µs ±13% ~ (p=0.230 n=50+50)
Revcomp-8 366ms ± 3% 367ms ± 3% ~ (p=0.745 n=49+49)
Template-8 48.5ms ± 4% 48.5ms ± 4% ~ (p=0.824 n=50+48)
TimeParse-8 263ns ± 2% 256ns ± 2% -2.98% (p=0.000 n=48+49)
TimeFormat-8 265ns ± 3% 262ns ± 3% -1.35% (p=0.000 n=48+49)
[Geo mean] 41.1µs 40.9µs -0.48%
Change-Id: Ib35fa15b54282abb39c077d150beee27f610891a
Reviewed-on: https://go-review.googlesource.com/43570
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
When the race detector is enabled,
the compiler randomizes the order in which functions are compiled,
in an attempt to shake out bugs.
But we never re-seed the rand source, so every execution is identical.
Fix that to get more coverage.
Change-Id: If5cdde03ef4f1bab5f45e07f03fb6614945481d7
Reviewed-on: https://go-review.googlesource.com/43572
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Currently, cgo converts integer macros into int64 if it's possible.
As a result, some macros which satisfy
math.MaxInt64 < x <= math.MaxUint64
will lose their original values.
This CL introduces the new probe to check signs,
so we can handle signed ints and unsigned ints separately.
Fixes#20369
Change-Id: I002ba452a82514b3a87440960473676f842cc9ee
Reviewed-on: https://go-review.googlesource.com/43476
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The generated file runtime/internal/sys/zversion.go is deleted by
`go tool cmd dist clean` as part of running clean.bash. Don't treat
a missing file as a reason to stop running the go tool; just treat
is as meaning that runtime/internal/sys is stale.
No test because I don't particularly want to clobber $GOROOT.
Fixes#20385.
Change-Id: I5251a99542cc93c33f627f133d7118df56e18af1
Reviewed-on: https://go-review.googlesource.com/43559
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
LLV and SCV are 64-bit load-linked and store-conditional. They
were used in runtime as #define WORD. Change them to normal
instruction form.
NOOP is hardware no-op. It was written as WORD $0. Make a name
for it for better disassembly output.
Fixes#12561.
Fixes#18238.
Change-Id: I82c667ce756fa83ef37b034b641e8c4366335e83
Reviewed-on: https://go-review.googlesource.com/40297
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Noticed while looking at #20356.
Cuts 160k (1%) off of the cmd/compile binary.
Change-Id: If2397bc6971d6be9be6975048adecb0b5efa6d66
Reviewed-on: https://go-review.googlesource.com/43501
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Previous CL (cmd/internal/objabi: shrink SymType down to a uint8) shrinks
SymType down to a uint8 but forgot making according change in goobj.
Fixes#20296
Also add a test to catch such Goobj format inconsistency bug
Change-Id: Ib43dd7122cfcacf611a643814e95f8c5a924941f
Reviewed-on: https://go-review.googlesource.com/42971
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Attaching positions to SB, SP, initial mem can result in
less-good line-numbering when compiled for debugging.
This "fix" also removes source position from a zero-valued
struct (but not from its fields) and from a zero-length
array constant.
This may be a general problem for constants in entry blocks.
Fixes#20367.
Change-Id: I7e9df3341be2e2f60f127d35bb31e43cdcfce9a1
Reviewed-on: https://go-review.googlesource.com/43531
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Enhance the one-live-memory-at-a-time check to run during many
more phases of the SSA backend. Also make it work in an interblock
fashion.
Change types.IsMemory to return true for tuples containing a memory type.
Fix trim pass to build the merged phi correctly. Doesn't affect
code but allows the check to pass after trim runs.
Switch the AddTuple* ops to take the memory-containing tuple argument second.
Update #20335
Change-Id: I5b03ef3606b75a9e4f765276bb8b183cdc172b43
Reviewed-on: https://go-review.googlesource.com/43495
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Adjust finddebugruntimepath to look for runtime/debug.go file
instead of runtime/runtime.go. This actually finds runtime.GOMAXPROCS
in every Go executable (including windows).
I also included "-Wl,-T,fix_debug_gdb_scripts.ld" parameter to gcc
invocation on windows to work around gcc bug (see #20183 for details).
This CL only fixes windows -buildmode=exe, buildmode=c-archive
is still broken.
Thanks to Egon Elbre and Nick Clifton for investigation.
Fixes#20183Fixes#20218
Change-Id: I5369a4db3913226aef3d9bd6317446856b0a1c34
Reviewed-on: https://go-review.googlesource.com/43331
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Make yellow the last highlight color rather than the first.
Yellow is also the color that Chrome uses to highlight
search results, which can be confusing.
Also, when Night Shift is on on macOS,
yellow highlighting is completely invisible.
I suppose should be sleeping instead.
Also, remove a completed TODO.
Change-Id: I0eb4439272fad9ccb5fe8e2cf409fdd5dc15b26e
Reviewed-on: https://go-review.googlesource.com/43463
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When compiling concurrently, we walk all functions before compiling
any of them. Walking functions can cause variables to switch from
being non-addrtaken to addrtaken, e.g. to prepare for a runtime call.
Typechecking propagates addrtaken-ness of closure variables to
their outer variables, so that capturevars can decide whether to
pass the variable's value or a pointer to it.
When all functions are compiled immediately, as long as the containing
function is compiled prior to the closure, this propagation has no effect.
When compilation is deferred, though, in rare cases, this results in
a change in the addrtaken-ness of a variable in the outer function,
which in turn changes the compiler's output.
(This is rare because in a great many cases, a temporary has been
introduced, insulating the outer variable from modification.)
But concurrent compilation must generate identical results.
To fix this, track whether capturevars has run.
If it has, there is no need to update outer variables
when closure variables change.
Capturevars always runs before any functions are walked or compiled.
The remainder of the changes in this CL are to support the test.
In particular, -d=compilelater forces the compiler to walk all
functions before compiling any of them, despite being non-concurrent.
This is useful because -live is fundamentally incompatible with
concurrent compilation, but we want -c=1 to have no behavior changes.
Fixes#20250
Change-Id: I89bcb54268a41e8588af1ac8cc37fbef856a90c2
Reviewed-on: https://go-review.googlesource.com/42853
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
On Windows the drive letter is sometime "c:" and sometimes "C:".
Fixes#20336.
Change-Id: I38c86999af9522c51470d60016729d41cfec6b25
Reviewed-on: https://go-review.googlesource.com/43390
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
TestCgoContainsSpace builds a small program which mimics $CC.
Usually, $CC attempts to compile a trivial code to detect its own
supported flags (i.e. "-no-pie", which must be passed on some systems),
however the mimic didn't consider these cases.
This CL solve the issue.
Also, use the same name as $CC, it may solve other potential problems.
Fixes#20324
Change-Id: I7a00ac016a5fd0667540f2a715371f8152edc395
Reviewed-on: https://go-review.googlesource.com/43330
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Tuple ops are weird. They are essentially a pair of ops,
one which consumes a mem and one which generates a mem (the Select1).
The schedule pass didn't handle these quite right.
Fix the scheduler to include both parts of the paired op in
the store chain. That makes sure that loads are correctly ordered
with respect to the first of the pair.
Add a check for the ssacheck builder, that there is only one
live store at a time. I thought we already had such a check, but
apparently not...
Fixes#20335
Change-Id: I59eb3446a329100af38d22820b1ca2190ca46a78
Reviewed-on: https://go-review.googlesource.com/43294
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Dhananjay Nakrani
David Lazar
Ian Lance Taylor
Ilya Tocar
Cherry Zhang
Aliaksandr Valialkin
Josh Bleecher Snyder
David Chase
Dmitry Savintsev
Fatih Arslan
Heschi Kreinick
Ben Shi
Keith Randall
Hiroshi Ioka
Brad Fitzpatrick
Steven Hartland
Robert Griesemer
Daniel Martí
Kevin Burke
David du Colombier
Alessandro Arzilli
Alberto Donizetti
Alex Brainman
Wei Xiao