This time with the cherry-pick from the proper patch of
the old CL.
Stack size increased.
Corrected NaN-comparison glitches.
Marked g register as clobbered by calls.
Fixed shared libraries.
live_ssa.go still disabled because of differences.
Presumably turning on more optimization will fix
both the stack size and the live_ssa.go glitches.
Enhanced debugging output for shared libs test.
Rebased onto master.
Updates #16010.
Change-Id: I40864faf1ef32c118fb141b7ef8e854498e6b2c4
Reviewed-on: https://go-review.googlesource.com/27159
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This is a copy of golang.org/cl/22092 by Ryan Brown.
Here's his original comment:
On my machine this increases the average time for 'go build cmd/go' from
2.25s to 2.36s. I tried to measure compile and link separately but saw
no significant change.
Change-Id: If0d2b756d52a0d30d4eda526929c82794d89dd7b
Reviewed-on: https://go-review.googlesource.com/25311
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
- Use machine instructions for uint64<->float conversions
- Do not enforce alignment on Zero/Move
ARM64 supports unaligned load/stores, but only aligned offset
or small offset can be encoded into instructions.
- Do combined loads
Change-Id: Iffca7dd0f13070b17b784861ce5a30af584680eb
Reviewed-on: https://go-review.googlesource.com/27086
Reviewed-by: David Chase <drchase@google.com>
s390x took up the last available chunk of int16 opcodes.
There are RISC-V and sparc64 ports in progress out of tree,
and there will likely be other architectures.
Reduce the opcode space to allow more architectures to
fit without increasing to int32.
This is the smallest power of two that accomodates all
existing architectures. All else being equal, smaller is
better--smaller numbers are easier to generate immediates
for and easier on the eyes when debugging.
Change-Id: I4d0824b28913892fbd0579d3f90bea34e44c8946
Reviewed-on: https://go-review.googlesource.com/24223
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
This CL adds a safety mechanism
for changing the number of opcodes
available per architecture.
A subsequent CL will actually make the change.
Change-Id: I6332ed5514f2f153c54d11b7da0cc8a6be1c8066
Reviewed-on: https://go-review.googlesource.com/24222
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Now that assembler opcodes have their own type, they can have a true
stringer, rather than explicit calls to Aconv, which makes for nicer
format strings.
Change-Id: Ic77f5f8ac38b4e519dcaa08c93e7b732226f7bfe
Reviewed-on: https://go-review.googlesource.com/25045
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
VPSHUFD should take an unsigned argument to be consistent with
PSHUFD. Also fix all usage.
Fixes#16499
Change-Id: Ie699c102afed0379445914a251710365b14d89b6
Reviewed-on: https://go-review.googlesource.com/25383
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Passes ssa_test.
Requires a few new instructions and some scratchpad
memory to move data between G and F registers.
Also fixed comparisons to be correct in case of NaN.
Added missing instructions for run.bash.
Removed some FP registers that are apparently "reserved"
(but that are also apparently also unused except for a
gratuitous multiplication by two when y = x+x would work
just as well).
Currently failing stack splits.
Updates #16010.
Change-Id: I73b161bfff54445d72bd7b813b1479f89fc72602
Reviewed-on: https://go-review.googlesource.com/26813
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Add more ARM64 optimizations:
- use hardware zero register when it is possible.
- use shifted ops.
The assembler supports shifted ops but not documented, nor knows
how to print it. This CL adds them.
- enable fast division.
This was disabled because it makes the old backend generate slower
code. But with SSA it generates faster code.
Turn on SSA by default, also adjust tests.
Change-Id: I7794479954c83bb65008dcb457bc1e21d7496da6
Reviewed-on: https://go-review.googlesource.com/26950
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
We shouldn't issue instructions like MOVL foo(SB), AX directly from the
SSA backend. Instead we should do LEAL foo(SB), AX; MOVL (AX), AX.
This simplifies obj logic because now only LEAL needs to be treated
specially. The register allocator uses the LEAL to in effect allocate
the temporary register required for the shared library thunk calls.
Also, the LEALs can now be CSEd. So code like
var g int
func f() { g += 5 }
Requires only one thunk call instead of 2.
Change-Id: Ib87d465f617f73af437445871d0ea91a630b2355
Reviewed-on: https://go-review.googlesource.com/26814
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
When a constant can be encoded in a logical instruction (BITCON), do
it this way instead of using the constant pool. The BITCON testing
code runs faster than table lookup (using map):
(on AMD64 machine, with pseudo random input)
BenchmarkIsBitcon-4 300000000 4.04 ns/op
BenchmarkTable-4 50000000 27.3 ns/op
The equivalent C code of BITCON testing is formally verified with
model checker CBMC against linear search of the lookup table.
Also handle cases when a constant can be encoded in a MOV instruction.
In this case, materializa the constant into REGTMP without using the
constant pool.
When constants need to be added to the constant pool, make sure to
check whether it fits in 32-bit. If not, store 64-bit.
Both legacy and SSA compiler backends are happy with this.
Fixes#16226.
Change-Id: I883e3069dee093a1cdc40853c42221a198a152b0
Reviewed-on: https://go-review.googlesource.com/26631
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Use the destination register for materializing the pc
for GOT references also. See https://go-review.googlesource.com/c/25442/
The SSA backend assumes CX does not get clobbered for these instructions.
Mark duffzero as clobbering CX. The linker needs to clobber CX
to materialize the address to call. (This affects the non-shared-library
duffzero also, but hopefully forbidding one register across duffzero
won't be a big deal.)
Hopefully this is all the cases where the linker is clobbering CX
under the hood and SSA assumes it isn't.
Change-Id: I080c938170193df57cd5ce1f2a956b68a34cc886
Reviewed-on: https://go-review.googlesource.com/26611
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Access to globals requires a 2-instruction sequence on PIC 386.
MOVL foo(SB), AX
is translated by the obj package into:
CALL getPCofNextInstructionInTempRegister(SB)
MOVL (&foo-&thisInstruction)(tmpReg), AX
The call returns the PC of the next instruction in a register.
The next instruction then offsets from that register to get the
address required. The tricky part is the allocation of the
temp register. The legacy compiler always used CX, and forbid
the register allocator from allocating CX when in PIC mode.
We can't easily do that in SSA because CX is actually a required
register for shift instructions. (I think the old backend got away
with this because the register allocator never uses CX, only
codegen knows that shifts must use CX.)
Instead, we allow the temp register to be anything. When the
destination of the MOV (or LEA) is an integer register, we can
use that register. Otherwise, we make sure to compile the
operation using an LEA to reference the global. So
MOVL AX, foo(SB)
is never generated directly. Instead, SSA generates:
LEAL foo(SB), DX
MOVL AX, (DX)
which is then rewritten by the obj package to:
CALL getPcInDX(SB)
LEAL (&foo-&thisInstruction)(DX), AX
MOVL AX, (DX)
So this CL modifies the obj package to use different thunks
to materialize the pc into different registers. We use the
registers that regalloc chose so that SSA can still allocate
the full set of registers.
Change-Id: Ie095644f7164a026c62e95baf9d18a8bcaed0bba
Reviewed-on: https://go-review.googlesource.com/25442
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This adds the initial SSA implementation for PPC64.
Builds golang and all.bash runs correctly. Simple hello.go
builds but does not run.
Change-Id: I7cec211b934cd7a2dd75a6cdfaf9f71867063466
Reviewed-on: https://go-review.googlesource.com/24453
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Functions should be declared to end after the last real instruction, not
after the last padding byte. We achieve this by adding the padding while
assembling the text section in the linker instead of adding the padding
to the function symbol in the compiler. This change makes dtrace happy.
TODO: check that this works with external linking
Fixes#15969
Change-Id: I973e478d0cd34b61be1ddc55410552cbd645ad62
Reviewed-on: https://go-review.googlesource.com/24040
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Any defer in a shared object crashed when GOARCH=386. This turns out to be two
bugs:
1) Calls to morestack were not processed to be PIC safe (must have been
possible to trigger this another way too)
2) jmpdefer needs to rewind the return address of the deferred function past
the instructions that load the GOT pointer into BX, not just past the call
Bug 2) requires re-introducing the a way for .s files to know when they are
being compiled for dynamic linking but I've tried to do that in as minimal
a way as possible.
Fixes#15916
Change-Id: Ia0d09b69ec272a176934176b8eaef5f3bfcacf04
Reviewed-on: https://go-review.googlesource.com/23623
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This has a minor performance cost, but far less than is being gained by SSA.
As an experiment, enable it during the Go 1.7 beta.
Having frame pointers on by default makes Linux's perf, Intel VTune,
and other profilers much more useful, because it lets them gather a
stack trace efficiently on profiling events.
(It doesn't help us that much, since when we walk the stack we usually
need to look up PC-specific information as well.)
Fixes#15840.
Change-Id: I4efd38412a0de4a9c87b1b6e5d11c301e63f1a2a
Reviewed-on: https://go-review.googlesource.com/23451
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
A few other architectures have already defined a NOFRAME flag.
Use it to disable frame pointer code on a few very low-level functions
that must behave like Windows code.
Makes the failing os/signal test pass on a Windows gomote.
Change-Id: I982365f2c59a0aa302b4428c970846c61027cf3e
Reviewed-on: https://go-review.googlesource.com/23456
Reviewed-by: Austin Clements <austin@google.com>
The following performance improvements have been made to the
low-level atomic functions for ppc64le & ppc64:
- For those cases containing a lwarx and stwcx (or other sizes):
sync, lwarx, maybe something, stwcx, loop to sync, sync, isync
The sync is moved before (outside) the lwarx/stwcx loop, and the
sync after is removed, so it becomes:
sync, lwarx, maybe something, stwcx, loop to lwarx, isync
- For the Or8 and And8, the shifting and manipulation of the
address to the word aligned version were removed and the
instructions were changed to use lbarx, stbcx instead of
register shifting, xor, then lwarx, stwcx.
- New instructions LWSYNC, LBAR, STBCC were tested and added.
runtime/atomic_ppc64x.s was changed to use the LWSYNC opcode
instead of the WORD encoding.
Fixes#15469
Ran some of the benchmarks in the runtime and sync directories.
Some results varied from run to run but the trend was improvement
based on best times for base and new:
runtime.test:
BenchmarkChanNonblocking-128 0.88 0.89 +1.14%
BenchmarkChanUncontended-128 569 511 -10.19%
BenchmarkChanContended-128 63110 53231 -15.65%
BenchmarkChanSync-128 691 598 -13.46%
BenchmarkChanSyncWork-128 11355 11649 +2.59%
BenchmarkChanProdCons0-128 2402 2090 -12.99%
BenchmarkChanProdCons10-128 1348 1363 +1.11%
BenchmarkChanProdCons100-128 1002 746 -25.55%
BenchmarkChanProdConsWork0-128 2554 2720 +6.50%
BenchmarkChanProdConsWork10-128 1909 1804 -5.50%
BenchmarkChanProdConsWork100-128 1624 1580 -2.71%
BenchmarkChanCreation-128 237 212 -10.55%
BenchmarkChanSem-128 705 667 -5.39%
BenchmarkChanPopular-128 5081190 4497566 -11.49%
BenchmarkCreateGoroutines-128 532 473 -11.09%
BenchmarkCreateGoroutinesParallel-128 35.0 34.7 -0.86%
BenchmarkCreateGoroutinesCapture-128 4923 4200 -14.69%
sync.test:
BenchmarkUncontendedSemaphore-128 112 94.2 -15.89%
BenchmarkContendedSemaphore-128 133 128 -3.76%
BenchmarkMutexUncontended-128 1.90 1.67 -12.11%
BenchmarkMutex-128 353 310 -12.18%
BenchmarkMutexSlack-128 304 283 -6.91%
BenchmarkMutexWork-128 554 541 -2.35%
BenchmarkMutexWorkSlack-128 567 556 -1.94%
BenchmarkMutexNoSpin-128 275 242 -12.00%
BenchmarkMutexSpin-128 1129 1030 -8.77%
BenchmarkOnce-128 1.08 0.96 -11.11%
BenchmarkPool-128 29.8 27.4 -8.05%
BenchmarkPoolOverflow-128 40564 36583 -9.81%
BenchmarkSemaUncontended-128 3.14 2.63 -16.24%
BenchmarkSemaSyntNonblock-128 1087 1069 -1.66%
BenchmarkSemaSyntBlock-128 897 893 -0.45%
BenchmarkSemaWorkNonblock-128 1034 1028 -0.58%
BenchmarkSemaWorkBlock-128 949 886 -6.64%
Change-Id: I4403fb29d3cd5254b7b1ce87a216bd11b391079e
Reviewed-on: https://go-review.googlesource.com/22549
Reviewed-by: Michael Munday <munday@ca.ibm.com>
Reviewed-by: Minux Ma <minux@golang.org>
Adds the FCFIDU instruction and uses it instead of the FCFID
instruction for unsigned integer to float casts. This change means
that unsigned integers do not have to be cast to signed integers
before being cast to a floating point value. Therefore it is no
longer necessary to insert instructions to detect and fix
values that overflow int64.
The previous code generating the uint64 to int64 cast handled
overflow by truncating the uint64 value. This truncation can
change the result of the rounding performed by the integer to
float cast.
The FCFIDU instruction was added in Power ISA 2.06B.
Fixes#15539.
Change-Id: Ia37a9631293eff91032d4cd9a9bec759d2142437
Reviewed-on: https://go-review.googlesource.com/22772
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The format has been tweaked several times in the latest cycle, so
replace go13ld with go17ld.
Change-Id: I343c49b02b7516fd781bc96ad46640579da68c59
Reviewed-on: https://go-review.googlesource.com/22708
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
a new relocation R_ADDRMIPSTLS is added, which resolves to 16-bit offset
of a TLS address on mips64x.
Change-Id: Ic60d0e1ba49ff1c433cead242f5884677ab227a5
Reviewed-on: https://go-review.googlesource.com/19804
Reviewed-by: Minux Ma <minux@golang.org>
SB register (R28) is introduced for access external addresses with shorter
instruction sequences. It is loaded at entry points. External data within
2G of SB can be accessed this way.
cmd/internal/obj: relocaltion R_ADDRMIPS is split into two relocations
R_ADDRMIPS and R_ADDRMIPSU, handling the low 16 bits and the "upper" 16
bits of external addresses, respectively, since the instructios may not
be adjacent. It might be better if relocation Variant could be used.
cmd/link/internal/mips64: support new relocations.
cmd/compile/internal/mips64: reserve SB register.
runtime: initialize SB register at entry points.
Change-Id: I5f34868f88c5a9698c042a8a1f12f76806c187b9
Reviewed-on: https://go-review.googlesource.com/19802
Reviewed-by: Minux Ma <minux@golang.org>
Leave R28 to SB register, which will be introduced in CL 19802.
Change-Id: I1cf7a789695c5de664267ec8086bfb0b043ebc14
Reviewed-on: https://go-review.googlesource.com/19863
Reviewed-by: Minux Ma <minux@golang.org>
MGHI (16-bit signed immediate) is now used where possible for both
MULLW and MULLD. MGHI is 2-bytes shorter than MSGFI.
Change-Id: I5d0648934f28b3403b1126913fd703d8f62b9e9f
Reviewed-on: https://go-review.googlesource.com/22398
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bill O'Farrell <billotosyr@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Current V-register range is V32~V63 on arm64. This patch changes it to
V0~V31.
fix#15465.
Change-Id: I90dab42dea46825ec5d7a8321ec4f6550735feb8
Reviewed-on: https://go-review.googlesource.com/22520
Reviewed-by: Aram Hăvărneanu <aram@mgk.ro>
Run-TryBot: Aram Hăvărneanu <aram@mgk.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Also add MustClose and MustWriter to cmd/internal/bio, and use them in
cmd/asm.
Change-Id: I07f5df3b66c17bc5b2e6ec9c4357d9b653e354e0
Reviewed-on: https://go-review.googlesource.com/21938
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
By replacing the *string used to represent pkgPath with a
reflect.name everywhere, the embedded *string for package paths
inside the reflect.name can be replaced by an offset, nameOff.
This reduces the number of pointers in the type information.
This also moves all reflect.name types into the same section, making
it possible to use nameOff more widely in later CLs.
No significant binary size change for normal binaries, but:
linux/amd64 PIE:
cmd/go: -440KB (3.7%)
jujud: -2.6MB (3.2%)
For #6853.
Change-Id: I3890b132a784a1090b1b72b32febfe0bea77eaee
Reviewed-on: https://go-review.googlesource.com/21395
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL introduces the typeOff type and a lookup method of the same
name that can turn a typeOff offset into an *rtype.
In a typical Go binary (built with buildmode=exe, pie, c-archive, or
c-shared), there is one moduledata and all typeOff values are offsets
relative to firstmoduledata.types. This makes computing the pointer
cheap in typical programs.
With buildmode=shared (and one day, buildmode=plugin) there are
multiple modules whose relative offset is determined at runtime.
We identify a type in the general case by the pair of the original
*rtype that references it and its typeOff value. We determine
the module from the original pointer, and then use the typeOff from
there to compute the final *rtype.
To ensure there is only one *rtype representing each type, the
runtime initializes a typemap for each module, using any identical
type from an earlier module when resolving that offset. This means
that types computed from an offset match the type mapped by the
pointer dynamic relocations.
A series of followup CLs will replace other *rtype values with typeOff
(and name/*string with nameOff).
For types created at runtime by reflect, type offsets are treated as
global IDs and reference into a reflect offset map kept by the runtime.
darwin/amd64:
cmd/go: -57KB (0.6%)
jujud: -557KB (0.8%)
linux/amd64 PIE:
cmd/go: -361KB (3.0%)
jujud: -3.5MB (4.2%)
For #6853.
Change-Id: Icf096fd884a0a0cb9f280f46f7a26c70a9006c96
Reviewed-on: https://go-review.googlesource.com/21285
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Only splits into separate files, no other changes.
Change-Id: Icc0da2c5f18e03e9ed7c0043bd7c790f741900f2
Reviewed-on: https://go-review.googlesource.com/21804
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is the first in a series of CLs to replace the use of pointers
in binary read-only data with offsets.
In standard Go binaries these CLs have a small effect, shrinking
8-byte pointers to 4-bytes. In position-independent code, it also
saves the dynamic relocation for the pointer. This has a significant
effect on the binary size when building as PIE, c-archive, or
c-shared.
darwin/amd64:
cmd/go: -12KB (0.1%)
jujud: -82KB (0.1%)
linux/amd64 PIE:
cmd/go: -86KB (0.7%)
jujud: -569KB (0.7%)
For #6853.
Change-Id: Iad5625bbeba58dabfd4d334dbee3fcbfe04b2dcf
Reviewed-on: https://go-review.googlesource.com/21284
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Emulate 64-bit signed high multiplication ((a*b)>>64). To do this
we use the 64-bit unsigned high multiplication method and then
fix the result as shown in Hacker's Delight 2nd ed., chapter 8-3.
Required to enable some division optimizations.
Change-Id: I9194f428e09d3d029cb1afb4715cd5424b5d922e
Reviewed-on: https://go-review.googlesource.com/21774
Reviewed-by: Bill O'Farrell <billotosyr@gmail.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Generated with honnef.co/go/unused
There is a large amount of unused code in cmd/internal/obj/s390x but
that can wait til the s390x port is merged.
There is some unused code in
cmd/internal/unvendor/golang.org/x/arch/arm/armasm but that should be
addressed upstream and a new revision imported.
Change-Id: I252c0f9ea8c5bb1a0b530a374ef13a0a20ea56aa
Reviewed-on: https://go-review.googlesource.com/21782
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Dave Cheney <dave@cheney.net>
bio.BufReader was never used.
bio.BufWriter was used to wrap an existing io.Writer, but the
bio.Writer returned would not be seekable, so replace all occurences
with bufio.Reader instead.
Change-Id: I9c6779e35c63178aa4e104c17bb5bb8b52de0359
Reviewed-on: https://go-review.googlesource.com/21722
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Replace the bidirectional bio.Buf type with a pair of unidirectional
buffered seekable Reader and Writers.
Change-Id: I86664a06f93c94595dc67c2cbd21356feb6680ef
Reviewed-on: https://go-review.googlesource.com/21720
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
API could still be made more Go-ey.
Updates #15165.
Change-Id: I514ffceffa43c293ae5d7e5f1e9193fda0098865
Reviewed-on: https://go-review.googlesource.com/21644
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Information about CPU architectures (e.g., name, family, byte
ordering, pointer and register size) is currently redundantly
scattered around the source tree. Instead consolidate the basic
information into a single new package cmd/internal/sys.
Also, introduce new sys.I386, sys.AMD64, etc. names for the constants
'8', '6', etc. and replace most uses of the latter. The notable
exceptions are a couple of error messages that still refer to the old
char-based toolchain names and function reltype in cmd/link.
Passes toolstash/buildall.
Change-Id: I8a6f0cbd49577ec1672a98addebc45f767e36461
Reviewed-on: https://go-review.googlesource.com/21623
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This updates dwarf.go to generate debug information as symbols
instead of directly writing to the output file. This should make
it easier to move generation of some of the debug info into the compiler.
Change-Id: Id2358988bfb689865ab4d68f82716f0676336df4
Reviewed-on: https://go-review.googlesource.com/20679
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Change-Id: I91873aaebf79bdf1c00d38aacc1a1fb8d79656a7
Reviewed-on: https://go-review.googlesource.com/21433
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We create appropriate ELF files automatically based on GOOS. There's
no point in supporting -H elf flag, particularly since we need to emit
different flavors of ELF depending on GOOS anyway.
If that weren't reason enough, -H elf appears to be broken since at
least Go 1.4. At least I wasn't able to find a way to make use of it.
As best I can tell digging through commit history, -H elf is just an
artifact leftover from Plan 9's 6l linker.
Change-Id: I7393caaadbc60107bbd6bc99b976a4f4fe6b5451
Reviewed-on: https://go-review.googlesource.com/21343
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Based on the ppc64 port.
s390x supports 2, 4 and 6 byte instructions and Go assembly
instructions sometimes map to several s390x instructions. The
assembler loops until a fixed point is reached in order to use
branch instructions that can only handle a short offset in a
similar way to other ports.
Change-Id: I4278bf46aca35a96ca9cea0857e6229643c9c1e3
Reviewed-on: https://go-review.googlesource.com/20942
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Record total number of relocations, pcdata, automatics, funcdata and files in
object file and use these numbers in the linker to allocate contiguous
slices to later be filled by the defined symbols.
name old secs new secs delta
LinkCmdGo 0.52 ± 3% 0.49 ± 3% -4.21% (p=0.000 n=91+92)
LinkJuju 4.48 ± 4% 4.21 ± 7% -6.08% (p=0.000 n=96+100)
name old MaxRSS new MaxRSS delta
LinkCmdGo 122k ± 2% 120k ± 4% -1.66% (p=0.000 n=98+93)
LinkJuju 799k ± 5% 865k ± 8% +8.29% (p=0.000 n=89+99)
GOGC=off
name old secs new secs delta
LinkCmdGo 0.42 ± 2% 0.41 ± 0% -2.98% (p=0.000 n=89+70)
LinkJuju 3.61 ± 0% 3.52 ± 1% -2.46% (p=0.000 n=80+89)
name old MaxRSS new MaxRSS delta
LinkCmdGo 130k ± 1% 128k ± 1% -1.33% (p=0.000 n=100+100)
LinkJuju 1.00M ± 0% 0.99M ± 0% -1.70% (p=0.000 n=100+100)
Change-Id: Ie08f6ccd4311bb78d8950548c678230a58635c73
Reviewed-on: https://go-review.googlesource.com/21026
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
See #14874
This change tells the linker to collect all the itablink symbols and
collect them so that moduledata can have a slice of all compiler
generated itabs.
The logic is shamelessly adapted from what is done with typelink symbols.
Change-Id: Ie93b59acf0fcba908a876d506afbf796f222dbac
Reviewed-on: https://go-review.googlesource.com/20889
Reviewed-by: Keith Randall <khr@golang.org>
Adds a new R_PCRELDBL relocation for 2-byte aligned relative
relocations on s390x. Should be removed once #14218 is
implemented.
Change-Id: I79dd2d8e746ba8cbc26c570faccfdd691e8161e8
Reviewed-on: https://go-review.googlesource.com/20941
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The obj.Nocache helper was only used by the arm back end, move it there.
Change-Id: I5c9faf995499991ead1f3d8c8ffc3b6af7346876
Reviewed-on: https://go-review.googlesource.com/20868
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL addresses a long standing CL by rsc by pushing the use of
Link.Windows down to its two users.
Link.Window was always initalised with the value of runtime.GOOS so
this does not affect cross compilation.
Change-Id: Ibbae068f8b5aad06336909691f094384caf12352
Reviewed-on: https://go-review.googlesource.com/20869
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Another object file change, gives a reasonable improvement:
name old s/op new s/op delta
LinkCmdGo 0.46 ± 3% 0.44 ± 9% -3.34% (p=0.000 n=98+82)
LinkJuju 4.09 ± 4% 3.92 ± 5% -4.30% (p=0.000 n=98+99)
I guess the data section could be mmap-ed instead of read, I haven't tried
that.
Change-Id: I959eee470a05526ab1579e3f5d3ede41c16c954f
Reviewed-on: https://go-review.googlesource.com/20928
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reduces size of archives in pkg/linux_amd64 by 3% from 41.5MB to 40.2MB
Change-Id: Id64ca7995de8dd84c9e7ce1985730927cf4bfd66
Reviewed-on: https://go-review.googlesource.com/20912
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Most 64-bit x86 ops can only take a signed 32-bit constant.
Clean up our rewrite rules to enforce this restriction.
Modify the assembler to fail if the offset does not fit
in the instruction.
That last check triggers a few times on weird testing code.
Suppress those errors if the compiler itself generated errors.
Fixes#14862
Change-Id: I76559af035b38483b1e59621a8029fc66b3a5d1e
Reviewed-on: https://go-review.googlesource.com/20815
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reduces size of archives in pkg/linux_amd64 by 1.4MB (3.2%),
slightly improving link time.
name old s/op new s/op delta
LinkCmdGo 0.52 ± 3% 0.51 ± 2% -0.65% (p=0.000 n=98+99)
Change-Id: I7e265f4d4dd08967c5c5d55c1045e533466bbbec
Reviewed-on: https://go-review.googlesource.com/20802
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For every string constant the compiler was creating 2 Sym's and 2
Node's. It would never refer to them again, but would keep them alive
in gostringpkg. This changes the code to just use obj.LSym's instead.
When compiling x/tools/go/types, this yields about a 15% reduction in
the number of calls to newname and a 3% reduction in the total number of
Node objects. Unfortunately I couldn't see any change in compile time,
but reducing memory usage is desirable anyhow.
Passes toolstash -cmp.
Change-Id: I24f1cb1e6cff0a3afba4ca66f7166874917a036b
Reviewed-on: https://go-review.googlesource.com/20792
Reviewed-by: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
c2go translated writing and advancing a pointer using slices.
Switch to something more idiomatic.
It is also more efficient, but not enough to matter.
Change-Id: I67709632ac53253615a35365824ae97bbe5458d5
Reviewed-on: https://go-review.googlesource.com/20767
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Use a local variable instead.
Passes toolstash -cmp.
Change-Id: I9623a40ff0d568f11afd1279b6aaa1c33eda644c
Reviewed-on: https://go-review.googlesource.com/20730
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The obj.Fmt* values are only used by gc/fmt.go, so just move them
there. Also, add comments documenting the correspondance between
FmtFoo names and their flag characters to make understanding the
existing documentation slightly less confusing.
While here, add a new FmtFlag named type to represent these values.
Change-Id: I9631214b892557d094823f1ac575d0c43a84007b
Reviewed-on: https://go-review.googlesource.com/20717
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Symbols in the object file currently refer to each other using symbol name
and version. Referring to the same symbol many times in an object file takes
up space and causes redundant map lookups. Instead write out a list of unique
symbol references and have symbols refer to each other using indexes into this
list.
Credit to Michael Hudson-Doyle for kicking this off.
Reduces pkg/linux_amd64 size by 30% from 61MB to 43MB
name old s/op new s/op delta
LinkCmdGo 0.74 ± 3% 0.63 ± 4% -15.22% (p=0.000 n=20+20)
LinkJuju 6.38 ± 6% 5.73 ± 6% -10.16% (p=0.000 n=20+19)
Change-Id: I7e101a0c80b8e673a3ba688295e6f80ea04e1cfb
Reviewed-on: https://go-review.googlesource.com/20099
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Partial automatic cleanup driven by Dominik Honnef's unused tool.
As _lookup now only has one caller, merge it into the caller and remove
the conditional create logic.
Change-Id: I2ea354d9d4b32a19905271eca74725231b6d8a93
Reviewed-on: https://go-review.googlesource.com/20589
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Just recognize "DATA" as a special pseudo op word in the assembler
directly.
Change-Id: I508e111fd71f561efa600ad69567a7089a57adb2
Reviewed-on: https://go-review.googlesource.com/20648
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The only remaining place that generated ADATA
Prog was the assembler. Stop, and delete some
now-dead code.
Passes toolstash -cmp.
Change-Id: I26578ff1b4868e98562b44f69d909c083e96f8d5
Reviewed-on: https://go-review.googlesource.com/20646
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Instead of generating ADATA instructions for
static data, write that static data directly
into the linker sym.
This is considerably more efficient.
The assembler still generates
ADATA instructions, so the ADATA machinery
cannot be dismantled yet. (Future work.)
Skipping ADATA has a significant impact
compiling the unicode package, which has lots
of static data.
name old time/op new time/op delta
Unicode 227ms ±10% 192ms ± 4% -15.61% (p=0.000 n=29+30)
name old alloc/op new alloc/op delta
Unicode 51.0MB ± 0% 45.8MB ± 0% -10.29% (p=0.000 n=30+30)
name old allocs/op new allocs/op delta
Unicode 610k ± 0% 578k ± 0% -5.29% (p=0.000 n=30+30)
This does not pass toolstash -cmp, because
this changes the order in which some relocations
get added, and thus it changes the output from
the compiler. It is not worth the execution time
to sort the relocs in the normal case.
However, compiling with -S -v generates identical
output if (1) you suppress printing of ADATA progs
in flushplist and (2) you suppress printing of
cpu timing. It is reasonable to suppress printing
the ADATA progs, since the data itself is dumped
later. I am therefore fairly confident that all
changes are superficial and non-functional.
Fixes#14786, although there's more to do
in general.
Change-Id: I8dfabe7b423b31a30e516cfdf005b62a2e9ccd82
Reviewed-on: https://go-review.googlesource.com/20645
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This makes the output of compiling with -S more
stable in the face of unimportant variation in the
order in which relocs are generated.
It is also more pleasant to read the relocs when
they are sorted.
Also, do some minor cleanup.
For #14786
Change-Id: Id92020b13fd21777dfb5b29c2722c3b2eb27001b
Reviewed-on: https://go-review.googlesource.com/20641
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Removes an intermediate layer of functions that was clogging up a
corner of the compiler's profile graph.
I can't measure a performance improvement running a large build
like jujud, but the profile reports less total time spent in
gc.(*lexer).getr.
Change-Id: I3000585cfcb0f9729d3a3859e9023690a6528591
Reviewed-on: https://go-review.googlesource.com/20565
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In addition to reflect.Value.Call, exported methods can be invoked
by the Func value in the reflect.Method struct. This CL has the
compiler track what functions get access to a legitimate reflect.Method
struct by looking for interface calls to either of:
Method(int) reflect.Method
MethodByName(string) (reflect.Method, bool)
This is a little overly conservative. If a user implements a type
with one of these methods without using the underlying calls on
reflect.Type, the linker will assume the worst and include all
exported methods. But it's cheap.
No change to any of the binary sizes reported in cl/20483.
For #14740
Change-Id: Ie17786395d0453ce0384d8b240ecb043b7726137
Reviewed-on: https://go-review.googlesource.com/20489
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
p can be nil in Dconv so we need to do a check before dereferencing
it. Fixes a problem I was having running toolstash.
Change-Id: I34d6d278b319583d8454c2342ac88e054fc4b641
Reviewed-on: https://go-review.googlesource.com/20595
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Today the linker keeps all methods of reachable types. This is
necessary if a program uses reflect.Value.Call. But while use of
reflection is widespread in Go for encoders and decoders, using
it to call a method is rare.
This CL looks for the use of reflect.Value.Call in a program, and
if it is absent, adopts a (reasonably conservative) method pruning
strategy as part of dead code elimination. Any method that is
directly called is kept, and any method that matches a used
interface's method signature is kept.
Whether or not a method body is kept is determined by the relocation
from its receiver's *rtype to its *rtype. A small change in the
compiler marks these relocations as R_METHOD so they can be easily
collected and manipulated by the linker.
As a bonus, this technique removes the text segment of methods that
have been inlined. Looking at the output of building cmd/objdump with
-ldflags=-v=2 shows that inlined methods like
runtime.(*traceAllocBlockPtr).ptr are removed from the program.
Relatively little work is necessary to do this. Linking two
examples, jujud and cmd/objdump show no more than +2% link time.
Binaries that do not use reflect.Call.Value drop 4 - 20% in size:
addr2line: -793KB (18%)
asm: -346KB (8%)
cgo: -490KB (10%)
compile: -564KB (4%)
dist: -736KB (17%)
fix: -404KB (12%)
link: -328KB (7%)
nm: -827KB (19%)
objdump: -712KB (16%)
pack: -327KB (14%)
yacc: -350KB (10%)
Binaries that do use reflect.Call.Value see a modest size decrease
of 2 - 6% thanks to pruning of unexported methods:
api: -151KB (3%)
cover: -222KB (4%)
doc: -106KB (2.5%)
pprof: -314KB (3%)
trace: -357KB (4%)
vet: -187KB (2.7%)
jujud: -4.4MB (5.8%)
cmd/go: -384KB (3.4%)
The trivial Hello example program goes from 2MB to 1.68MB:
package main
import "fmt"
func main() {
fmt.Println("Hello, 世界")
}
Method pruning also helps when building small binaries with
"-ldflags=-s -w". The above program goes from 1.43MB to 1.2MB.
Unfortunately the linker can only tell if reflect.Value.Call has been
statically linked, not if it is dynamically used. And while use is
rare, it is linked into a very common standard library package,
text/template. The result is programs like cmd/go, which don't use
reflect.Value.Call, see limited benefit from this CL. If binary size
is important enough it may be possible to address this in future work.
For #6853.
Change-Id: Iabe90e210e813b08c3f8fd605f841f0458973396
Reviewed-on: https://go-review.googlesource.com/20483
Reviewed-by: Russ Cox <rsc@golang.org>
Drops cmd/binary size from 14.41 MiB to 11.42 MiB.
Before:
text data bss dec hex filename
8121210 3521696 737960 12380866 bceac2 ../pkg/tool/linux_amd64/compile
bradfitz@dev-bradfitz-debian2:~/go/src$ ls -l ../pkg/tool/linux_amd64/compile
-rwxr-xr-x 1 bradfitz bradfitz 15111272 Mar 8 23:32 ../pkg/tool/linux_amd64/compile
a2afc0 51312 R html.statictmp_0085
6753f0 56592 T cmd/internal/obj/x86.doasm
625480 58080 T cmd/compile/internal/gc.typecheck1
f34c40 65688 D runtime.trace
be0a20 133552 D cmd/compile/internal/ppc64.varianttable
c013e0 265856 D cmd/compile/internal/arm.progtable
c42260 417280 D cmd/compile/internal/amd64.progtable
ca8060 417280 D cmd/compile/internal/x86.progtable
f44ce0 500640 D cmd/internal/obj/arm64.oprange
d0de60 534208 D cmd/compile/internal/ppc64.progtable
d90520 667520 D cmd/compile/internal/arm64.progtable
e334a0 790368 D cmd/compile/internal/mips64.progtable
a3e8c0 1579362 r runtime.pclntab
After:
text data bss dec hex filename
8128226 375954 246432 8750612 858614 ../pkg/tool/linux_amd64/compile
-rwxr-xr-x 1 bradfitz bradfitz 11971432 Mar 8 23:35 ../pkg/tool/linux_amd64/compile
6436d0 43936 T cmd/compile/internal/gc.walkexpr
c13ca0 45056 D cmd/compile/internal/ssa.opcodeTable
5d8ea0 50256 T cmd/compile/internal/gc.(*state).expr
818c50 50448 T cmd/compile/internal/ssa.rewriteValueAMD64_OpMove
a2d0e0 51312 R html.statictmp_0085
6753d0 56592 T cmd/internal/obj/x86.doasm
625460 58080 T cmd/compile/internal/gc.typecheck1
c38fe0 65688 D runtime.trace
a409e0 1578810 r runtime.pclntab
Fixes#14703
Change-Id: I2177596d5c7fd67db0a3c423cd90801cf52adb12
Reviewed-on: https://go-review.googlesource.com/20450
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Deleting the string merging pass makes the linker 30-35% faster
but makes jujud (using the github.com/davecheney/benchjuju snapshot) 2.5% larger.
Two optimizations bring the space overhead down to 0.6%.
First, change the default alignment for string data to 1 byte.
(It was previously defaulting to larger amounts, usually pointer width.)
Second, write out the type string for T (usually a bigger expression) as "*T"[1:],
so that the type strings for T and *T share storage.
Combined, these obtain the bulk of the benefit of string merging
at essentially no cost. The remaining benefit from string merging
is not worth the excessive cost, so delete it.
As penance for making the jujud binary 0.6% larger,
the next CL in this sequence trims the reflect functype
information enough to make the jujud binary overall 0.75% smaller
(that is, that CL has a net -1.35% effect).
For #6853.
Fixes#14648.
Change-Id: I3fdd74c85410930c36bb66160ca4174ed540fc6e
Reviewed-on: https://go-review.googlesource.com/20334
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Currently, package obj reserves a range of 1<<12 opcodes for each
target architecture. E.g., mips64 has [6<<12, 7<<12).
However, because mips.ABEQ and mips.ALAST are both within that range,
the expression mips.ABEQ+mips.ALAST in turn falls (far) outside that
range around 12<<12, meaning it could theoretically collide with
another arch's opcodes.
More practically, it's a problem because 12<<12 overflows an int16,
which hampers fixing #14692. (We could also just switch to uint16 to
avoid the overflow, but that still leaves the first problem.)
As a workaround, use Michael Hudson-Doyle's solution from
https://golang.org/cl/20182 and use negative values for these variant
instructions.
Passes toolstash -cmp for GOARCH=arm and GOARCH=mips64.
Updates #14692.
Change-Id: Iad797d10652360109fa4db19d4d1edb6529fc2c0
Reviewed-on: https://go-review.googlesource.com/20345
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fix some test output while we're here.
Change-Id: I265cedc222e078eff120f268b92451e12b0400b2
Reviewed-on: https://go-review.googlesource.com/20294
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
No immediate reduction in the size of Addr.
Passes toolstash -cmp.
Change-Id: I78ea4c6e181b6e571ce70a5f1ae8158844eb197d
Reviewed-on: https://go-review.googlesource.com/20276
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Add tests to ensure that the size of important types don't change
unexpectedly.
Skip the test on nacl platforms because of their unusual padding
requirements.
Change-Id: Iddb127a99499e089a309b721f5073356c0da8b24
Reviewed-on: https://go-review.googlesource.com/20285
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Dave Cheney <dave@cheney.net>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is mostly changing the opXXX helpers to take an int16 (matching Prog.As)
argument and return a uint32. The only bit that's not completely trivial is
passing -p.As to opirr to signal operating on a shifted constant, because AADD
+ ALAST overflows int16.
Change-Id: I69133800bbe41c38fa4a89bbbf49823043b3419c
Reviewed-on: https://go-review.googlesource.com/20182
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The tree's pretty inconsistent about single space vs double space
after a period in documentation. Make it consistently a single space,
per earlier decisions. This means contributors won't be confused by
misleading precedence.
This CL doesn't use go/doc to parse. It only addresses // comments.
It was generated with:
$ perl -i -npe 's,^(\s*// .+[a-z]\.) +([A-Z]),$1 $2,' $(git grep -l -E '^\s*//(.+\.) +([A-Z])')
$ go test go/doc -update
Change-Id: Iccdb99c37c797ef1f804a94b22ba5ee4b500c4f7
Reviewed-on: https://go-review.googlesource.com/20022
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Dave Day <djd@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is a subset of https://golang.org/cl/20022 with only the copyright
header lines, so the next CL will be smaller and more reviewable.
Go policy has been single space after periods in comments for some time.
The copyright header template at:
https://golang.org/doc/contribute.html#copyright
also uses a single space.
Make them all consistent.
Change-Id: Icc26c6b8495c3820da6b171ca96a74701b4a01b0
Reviewed-on: https://go-review.googlesource.com/20111
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We can't drop Prog entries when we want to print disassembly.
Added a test for -S.
Fixes#14515
Change-Id: I44c72f70f7a3919acc01c559d30335d26669e76f
Reviewed-on: https://go-review.googlesource.com/19930
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Our stack frame sizes look pretty good now. Lower the stack
guard from 1024 to 720.
Tip is currently using 720.
We could go lower (to 640 at least) except PPC doesn't like that.
Change-Id: Ie5f96c0e822435638223f1e8a2bd1a1eed68e6aa
Reviewed-on: https://go-review.googlesource.com/19922
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
I can't remember just how this happened to me, but I got an unfortunate
crash with some set of cmd/compile debug options and source code.
Change-Id: Ibef6129c50b68dad0594ac439466bfbc4b32a095
Reviewed-on: https://go-review.googlesource.com/19920
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Simplifies some code as ptrToThis was unreliable under dynamic
linking. Now the same type lookup is used regardless of execution
mode.
A synthetic relocation, R_USETYPE, is introduced to make sure the
linker includes *T on use of T, if *T is carrying methods.
Changes the heap dump format. Anything reading the format needs to
look at the last bool of a type of an interface value to determine
if the type should be the pointer-to type.
Reduces binary size of cmd/go by 0.2%.
For #6853.
Change-Id: I79fcb19a97402bdb0193f3c7f6d94ddf061ee7b2
Reviewed-on: https://go-review.googlesource.com/19695
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Only tests do this, provide them a hook to disable freeing
after flush.
Change-Id: I810c6c51414a93f476a18ba07b807e16092bf8cf
Reviewed-on: https://go-review.googlesource.com/19907
Reviewed-by: Keith Randall <khr@golang.org>
Don't accumulate a massive list of Prog structs during
compilation and write them all out at the end of compilation.
Instead, convert them to code+relocs (or data+relocs) after each
function is compiled.
Track down a few other places that were keeping Progs alive
and nil them out so the Progs get GCd promptly.
Saves ~20% in peak memory usage for the compiler. Surprisingly not much
help speed-wise (only because we end up doing more GCs. With a
compensating GOGC=120, it does help a bit), but this provides a base for
more changes (e.g. reusing a cache of Progs).
Change-Id: I838e01017c228995a687a8110d0cd67bf8596407
Reviewed-on: https://go-review.googlesource.com/19867
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When -N, make sure we don't drop every instruction from
a block, even ones which would otherwise be empty.
Helps keep line numbers around for debugging, particularly
for break and continue statements (which often compile
down to nothing).
Fixes#14379
Change-Id: I33722c4f0dcd502f146fa48af262ba3a477c959a
Reviewed-on: https://go-review.googlesource.com/19854
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
Change-Id: I38e59088c37426d914ce2b4dfc79f3d476e06f49
Reviewed-on: https://go-review.googlesource.com/19617
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
These have no accepted input syntax and,
as far as I can tell, do not actually exist.
Change-Id: Iafdfb71adccad76230191d922eb7ddf78b7d5898
Reviewed-on: https://go-review.googlesource.com/19612
Reviewed-by: Ian Lance Taylor <iant@golang.org>
3DNotAnymore!
These only ever existed on AMD (not Intel) processors,
and AMD cancelled support for them in August 2010.
Change-Id: Ia362259add9d4f5788fd151fb373f91288677407
Reviewed-on: https://go-review.googlesource.com/19611
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Semi-regular merge from tip to dev.ssa.
Two fixes:
1) Mark selectgo as not returning. This caused problems
because there are no VARKILL ops on the selectgo path,
causing things to be marked live that shouldn't be.
2) Tell the amd64 assembler that addressing modes like
name(SP)(AX*4) are ok.
Change-Id: I9ca81c76391b1a65cc47edc8610c70ff1a621913
LEAQ symbol+100(SB), AX
Under dynamic link, rewrites to
MOVQ symbol@GOT(SB), AX
ADDQ $100, AX
but ADDQ clobbers flags, whereas the original LEAQ (when not dynamic
linking) doesn't.
Use LEAQ instead of ADDQ to add that constant in so we preserve flags.
Change-Id: Ibb055403d94a4c5163e1c7d2f45da633ffd0b6a3
Reviewed-on: https://go-review.googlesource.com/19230
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It's causing the darwin-386 builder to fail with:
--- FAIL: TestDynlink (0.07s)
obj6_test.go:118: error exit status 3 output go tool: no such tool "asm"
FAIL
FAIL cmd/internal/obj/x86 0.073s
So skip it for now. It's tested in enough other places.
Change-Id: I9a98ad7b8be807005750112d892ac6c676c17dd5
Reviewed-on: https://go-review.googlesource.com/18989
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The current code delays the literal pool until the very last moment,
but based on the assumption that span-dependent jumps are as
short as possible. If they need to be enlarged in a later round, that
very last moment may be too late. Flush a little early to prevent that.
Fixes#13579.
Change-Id: I759b5db5c43a977bf2b940872870cbbc436ad141
Reviewed-on: https://go-review.googlesource.com/18972
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
Run-TryBot: Russ Cox <rsc@golang.org>
The x86 backend automatically rewrites MOV $0, AX to
XOR AX, AX. That rewrite isn't ok when the flags register
is live across the MOV. Keep track of which moves care
about preserving flags, then disable this rewrite for them.
On x86, Prog.Mark was being used to hold the length of the
instruction. We already store that in Prog.Isize, so no
need to store it in Prog.Mark also. This frees up Prog.Mark
to hold a bitmask on x86 just like all the other architectures.
Update #12405
Change-Id: Ibad8a8f41fc6222bec1e4904221887d3cc3ca029
Reviewed-on: https://go-review.googlesource.com/18861
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
Was part of #13822 but not in the first message, so I missed it.
Fixes#13822 again.
Change-Id: I775004fa8d47b6af293124605521ec396573e267
Reviewed-on: https://go-review.googlesource.com/18900
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Add test for assembly errors, to verify fix.
Make sure invalid instruction errors are printed just once
(was printing them once per span iteration, so typically twice).
Fixes#13282.
Change-Id: Id5f66f80a80b3bc4832e00084b0a91f1afec7f8f
Reviewed-on: https://go-review.googlesource.com/18858
Reviewed-by: Rob Pike <r@golang.org>
Add amd64 instructions I promised to add for Go 1.6
at the beginning of January.
These may be the last instructions added by hand.
I intend to generate the whole set mechanically for Go 1.7.
Fixes#13822.
Change-Id: I8c6bae2efd25f717f9ec750402e50f408a911d2b
Reviewed-on: https://go-review.googlesource.com/18853
Reviewed-by: Rob Pike <r@golang.org>
Use the standard names, for discoverability.
Use the standard register arguments, for correctness.
Implement all possible arguments, for completeness.
Enable the corresponding tests now that everything is standard.
Update the uses in package runtime.
Fixes#14068.
Change-Id: I8e1af9a41e7d02d98c2a82af3d4cdb3e9204824f
Reviewed-on: https://go-review.googlesource.com/18852
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Not much testing yet, but the test now exists.
Another step toward #13822.
Change-Id: Idb2b06bf53a6113c83008150b4c0b631bb195279
Reviewed-on: https://go-review.googlesource.com/18844
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Tests for this and many other instructions are in a separate followup CL.
For #14068.
Change-Id: I6955315996a34d7fb79369b9d9a0119d11745e85
Reviewed-on: https://go-review.googlesource.com/18849
Reviewed-by: Rob Pike <r@golang.org>
Ilya added POPCNT in a CL earlier this month but it's really only POPCNTQ.
The other forms still need to be added.
For #4816.
Change-Id: I1186850d32ad6d5777475c7808e6fc9d9133e118
Reviewed-on: https://go-review.googlesource.com/18848
Reviewed-by: Rob Pike <r@golang.org>
Not recognized in any instructions yet, but this lets the
assembler parse them at least.
For #14068.
Change-Id: Id4f7329a969b747a867ce261b20165fab2cdcab8
Reviewed-on: https://go-review.googlesource.com/18846
Reviewed-by: Rob Pike <r@golang.org>
Also, remove output file if there are encoding errors.
The extra reports are convenient.
Removing the output file is very important.
Noticed while testing.
Change-Id: I0fab17d4078f93c5a0d6d1217d8d9a63ac789696
Reviewed-on: https://go-review.googlesource.com/18845
Reviewed-by: Rob Pike <r@golang.org>
Instead of two parallel files that look almost identical,
mark the expected differences in the original file.
The annotations being added here keep the tests passing,
but they also make clear a number of printing or parsing
errors that were not as easily seen when the data was
split across two files.
Fix a few diagnostic problems in cmd/internal/obj as well.
A step toward #13822.
Change-Id: I997172681ea6fa7da915ff0f0ab93d2b76f8dce2
Reviewed-on: https://go-review.googlesource.com/18823
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixes build on those systems.
Also fix printing of AVARLIVE.
Change-Id: I1b38cca0125689bc08e4e1bdd0d0c140b1ea079a
Reviewed-on: https://go-review.googlesource.com/18641
Reviewed-by: Russ Cox <rsc@golang.org>
This will allow the compiler to crunch Prog lists down to code as each
function is compiled, instead of waiting until the end, which should
reduce the working set of the compiler. But not until Go 1.7.
This also makes it easier to write some machine code output tests
for the assembler, which is why it's being done now.
For #13822.
Change-Id: I0811123bc6e5717cebb8948f9cea18e1b9baf6f7
Reviewed-on: https://go-review.googlesource.com/18311
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Consider this code:
func f(*int)
func g() {
p := new(int)
f(p)
}
where f is an assembly function.
In general liveness analysis assumes that during the call to f, p is dead
in this frame. If f has retained p, p will be found alive in f's frame and keep
the new(int) from being garbage collected. This is all correct and works.
We use the Go func declaration for f to give the assembly function
liveness information (the arguments are assumed live for the entire call).
Now consider this code:
func h1() {
p := new(int)
syscall.Syscall(1, 2, 3, uintptr(unsafe.Pointer(p)))
}
Here syscall.Syscall is taking the place of f, but because its arguments
are uintptr, the liveness analysis and the garbage collector ignore them.
Since p is no longer live in h once the call starts, if the garbage collector
scans the stack while the system call is blocked, it will find no reference
to the new(int) and reclaim it. If the kernel is going to write to *p once
the call finishes, reclaiming the memory is a mistake.
We can't change the arguments or the liveness information for
syscall.Syscall itself, both for compatibility and because sometimes the
arguments really are integers, and the garbage collector will get quite upset
if it finds an integer where it expects a pointer. The problem is that
these arguments are fundamentally untyped.
The solution we have taken in the syscall package's wrappers in past
releases is to insert a call to a dummy function named "use", to make
it look like the argument is live during the call to syscall.Syscall:
func h2() {
p := new(int)
syscall.Syscall(1, 2, 3, uintptr(unsafe.Pointer(p)))
use(unsafe.Pointer(p))
}
Keeping p alive during the call means that if the garbage collector
scans the stack during the system call now, it will find the reference to p.
Unfortunately, this approach is not available to users outside syscall,
because 'use' is unexported, and people also have to realize they need
to use it and do so. There is much existing code using syscall.Syscall
without a 'use'-like function. That code will fail very occasionally in
mysterious ways (see #13372).
This CL fixes all that existing code by making the compiler do the right
thing automatically, without any code modifications. That is, it takes h1
above, which is incorrect code today, and makes it correct code.
Specifically, if the compiler sees a foreign func definition (one
without a body) that has uintptr arguments, it marks those arguments
as "unsafe uintptrs". If it later sees the function being called
with uintptr(unsafe.Pointer(x)) as an argument, it arranges to mark x
as having escaped, and it makes sure to hold x in a live temporary
variable until the call returns, so that the garbage collector cannot
reclaim whatever heap memory x points to.
For now I am leaving the explicit calls to use in package syscall,
but they can be removed early in a future cycle (likely Go 1.7).
The rule has no effect on escape analysis, only on liveness analysis.
Fixes#13372.
Change-Id: I2addb83f70d08db08c64d394f9d06ff0a063c500
Reviewed-on: https://go-review.googlesource.com/18584
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Add several instructions that were used via BYTE and use them.
Instructions added: PEXTRB, PEXTRD, PEXTRQ, PINSRB, XGETBV, POPCNT.
Change-Id: I5a80cd390dc01f3555dbbe856a475f74b5e6df65
Reviewed-on: https://go-review.googlesource.com/18593
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Added a format option to inhibit output of .Note field in
printing, and enabled that option during export.
Added test.
Fixes#13777.
Change-Id: I739f9785eb040f2fecbeb96d5a9ceb8c1ca0f772
Reviewed-on: https://go-review.googlesource.com/18217
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: David Chase <drchase@google.com>
This CL changes the source file information in the
standard library's .a files to say "$GOROOT/src/runtime/chan.go"
(with a literal "$GOROOT") instead of spelling out the actual directory.
The linker then substitutes the actual $GOROOT (or $GOROOT_FINAL)
as appropriate.
If people download a binary distribution to an alternate location,
following the instructions at https://golang.org/doc/install#install,
the code before this CL would end up with source paths pointing to
/usr/local/go no matter where the actual sources were.
Now the source paths for built binaries will point to the actual sources
(hopefully).
The source line information in distributed binaries is not affected:
those will still say /usr/local/go. But binaries people build themselves
(their own programs, not the go distribution programs) will be correct.
Fixing this path also fixes the lookup of the runtime-gdb.py file.
Fixes#5533.
Change-Id: I03729baae3fbd8cd636e016275ee5ad2606e4663
Reviewed-on: https://go-review.googlesource.com/18200
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
These three files contain only code written for Go
(and trivial amounts at that), not any code ported
from Inferno or Plan 9.
Remove the incorrect Inferno/Plan 9 notices.
Fixes#13576.
Change-Id: Ib9901fb360232282aae5ee0f4aa527bd6f4eaaed
Reviewed-on: https://go-review.googlesource.com/17779
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When using GOEXPERIMENT=fieldtrack, we can see AUSEFIELD instructions.
We generally want to ignore them.
No tests because as far as I can tell there are no tests for
GOEXPERIMENT=fieldtrack.
Change-Id: Iee26f25592158e5db691a36cf8d77fc54d051314
Reviewed-on: https://go-review.googlesource.com/17610
Reviewed-by: David Symonds <dsymonds@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
runtime.stackBarrier is a strange function: it is only ever "called" by
smashing its address into a LR slot on the stack. Calling it like this
certainly does not adhere to the rule that r12 is set to the global entry point
before calling it and the prologue instrutions that compute r2 from r12 in fact
just corrupt r2, which is bad because the function that stackBarrier returns to
probably uses r2 to access global data.
Fortunately stackBarrier itself does not access any global data and so does not
depend on the value of r2, meaning we can ignore the ABI rules and simply skip
inserting the prologue instructions into this specific function.
Fixes 64bit.go, append.go and fixedbugs/issue13169.go from "cd test; go run
run.go -linkshared".
Change-Id: I606864133a83935899398e2d42edd08a946aab24
Reviewed-on: https://go-review.googlesource.com/17281
Reviewed-by: Austin Clements <austin@google.com>
Transactional memory, will later be used for semaphore implementation.
Nacl not supported yet.
Change-Id: Ic18453dcaa08d07bb217c0b95461584f007d518b
Reviewed-on: https://go-review.googlesource.com/16479
Reviewed-by: Russ Cox <rsc@golang.org>
golang.org/cl/16383 broke android/386 because by a sort of confluence of hacks
no TLS relocations were emitted at all when Flag_shared != 0. The hack in
runtime/cgo works as well in a PIE executable as it does with a position
dependent one, so the simplest fix is to still emit a R_TLS_LE reloc when goos
== "android".
A real fix is to use something more like the IE model code but loading the
offset from %gs to the thread local storage from a global variable rather than
from a location chosen by the system linker (this is how android/arm works).
Issue #9327.
Change-Id: I9fbfc890ec7fe191f80a595b6cf8e2a1fcbe3034
Reviewed-on: https://go-review.googlesource.com/17049
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
This works by adding a call to __x86.get_pc_thunk.cx immediately before any
instruction that accesses global data and then assembling the instruction to
use the appropriate offset from CX instead of the absolute address. Some forms
cannot be assembled that way and are rewritten to load the address into CX
first.
-buildmode=pie works now, but is not yet tested.
Fixes#13201 (I think)
Change-Id: I32a8561e7fc9dd4ca6ae3b0e57ad78a6c50bf1f5
Reviewed-on: https://go-review.googlesource.com/17014
Reviewed-by: Ian Lance Taylor <iant@golang.org>
I was prodded into doing this in review comments for the ARM version, and it's
going to make shared libs for 386 easier.
Change-Id: Id12de801b1425b8c6b5736fe91b418fc123a4e40
Reviewed-on: https://go-review.googlesource.com/17012
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This includes the first parts of the general approach to PIC: load PC into CX
whenever it is needed. This is going to lead to large binaries and poor
performance but it's a start and easy to get right.
Change-Id: Ic8bf1d0a74284cca0d94a68cf75024e8ab063b4e
Reviewed-on: https://go-review.googlesource.com/16383
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This requires changing the tls access code to match the patterns documented in
the ABI documentation or the system linker will "optimize" it into ridiculousness.
With this change, -buildmode=pie works, although as it is tested in testshared,
the tests are not run yet.
Change-Id: I1efa6687af0a5b8db3385b10f6542a49056b2eb3
Reviewed-on: https://go-review.googlesource.com/15971
Reviewed-by: Russ Cox <rsc@golang.org>
The PowerPC ISA does not have a PC-relative load instruction, which poses
obvious challenges when generating position-independent code. The way the ELFv2
ABI addresses this is to specify that r2 points to a per "module" (shared
library or executable) TOC pointer. Maintaining this pointer requires
cooperation between codegen and the system linker:
* Non-leaf functions leave space on the stack at r1+24 to save the TOC pointer.
* A call to a function that *might* have to go via a PLT stub must be followed
by a nop instruction that the system linker can replace with "ld r1, 24(r1)"
to restore the TOC pointer (only when dynamically linking Go code).
* When calling a function via a function pointer, the address of the function
must be in r12, and the first couple of instructions (the "global entry
point") of the called function use this to derive the address of the TOC
for the module it is in.
* When calling a function that is implemented in the same module, the system
linker adjusts the call to skip over the instructions mentioned above (the
"local entry point"), assuming that r2 is already correctly set.
So this changeset adds the global entry point instructions, sets the metadata so
the system linker knows where the local entry point is, inserts code to save the
TOC pointer at 24(r1), adds a nop after any call not known to be local and copes
with the odd non-local code transfer in the runtime (e.g. the stuff around
jmpdefer). It does not actually compile PIC yet.
Change-Id: I7522e22bdfd2f891745a900c60254fe9e372c854
Reviewed-on: https://go-review.googlesource.com/15967
Reviewed-by: Russ Cox <rsc@golang.org>
The larger stack frames causes the nosplit stack to overflow so the next change
increases the stackguard.
Change-Id: Ib2b4f24f0649eb1d13e3a58d265f13d1b6cc9bf9
Reviewed-on: https://go-review.googlesource.com/15964
Reviewed-by: Russ Cox <rsc@golang.org>
Larger stack frames mean nosplit functions use more stack and so the limit
needs to increase.
The change to test/nosplit.go is a bit ugly but I can't really think of a
way to make it nicer.
Change-Id: I2616b58015f0b62abbd62951575fcd0d2d8643c2
Reviewed-on: https://go-review.googlesource.com/16504
Reviewed-by: Russ Cox <rsc@golang.org>
MIPS64 has 32 general purpose 64-bit integer registers (R0-R31), 32
64-bit floating point registers (F0-F31). Instructions are fixed-width,
and are 32-bit wide. Instructions are all in standard 1-, 2-, 3-operand
forms.
MIPS64-specific relocations are added. For this reason, test data of
cmd/newlink are regenerated.
No other changes are made to portable structures.
Branch delay slots are current filled with NOP instructions. The function
for instruction scheduling (try to fill the delay slot with a useful
instruction) is implemented but disabled for now.
Change-Id: Ic364999c7a33245260c1381fc26a2fa8972d38b3
Reviewed-on: https://go-review.googlesource.com/14442
Reviewed-by: Minux Ma <minux@golang.org>
sradi and sradi. hide the top bit of their immediate argument apart from the
rest of it, but the code only handled the sradi case.
I'm pretty sure this is the only instruction missing (a couple of the rotate
instructions encode their immediate the same way but their handling looks OK).
This fixes the failure of "GOARCH=amd64 ~/go/bin/go install -v runtime" as
reported in the bug.
Fixes#11987
Change-Id: I0cdefcd7a04e0e8fce45827e7054ffde9a83f589
Reviewed-on: https://go-review.googlesource.com/16710
Reviewed-by: Minux Ma <minux@golang.org>
On ppc64x, the thread pointer, held in R13, points 0x7000 bytes past where
thread-local storage begins (presumably to maximize the amount of storage that
can be accessed with a 16-bit signed displacement). The relocations used to
indicate thread-local storage to the platform linker account for this, so to be
able to support external linking we need to change things so the linker applies
this offset instead of the runtime assembly.
Change-Id: I2556c249ab2d802cae62c44b2b4c5b44787d7059
Reviewed-on: https://go-review.googlesource.com/14233
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
And get rid of the stupid game of encoding the instruction in the addend.
Change-Id: Ib4de7515196cbc1e63b4261b01931cf02a44c1e6
Reviewed-on: https://go-review.googlesource.com/14055
Reviewed-by: Russ Cox <rsc@golang.org>
Android linker does not handle TLS for us. We set up the TLS slot
for g, as darwin/386,amd64 handle instead. This is disgusting and
fragile. We will eventually fix this ugly hack by taking advantage
of the recent TLS IE model implementation. (Instead of referencing
an GOT entry, make the code sequence look into the TLS variable that
holds the offset.)
The TLS slot for g in android/amd64 assumes a fixed offset from %fs.
See runtime/cgo/gcc_android_amd64.c for details.
For golang/go#10743
Change-Id: I1a3fc207946c665515f79026a56ea19134ede2dd
Reviewed-on: https://go-review.googlesource.com/15991
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Modified GOSSA{HASH.PKG} environment variable filters to
make it easier to make/run with all SSA for testing.
Disable attempts at SSA for architectures that are not
amd64 (avoid spurious errors/unimplementeds.)
Removed easy out for unimplemented features.
Add convert op for proper liveness in presence of uintptr
to/from unsafe.Pointer conversions.
Tweaked stack sizes to get a pass on windows;
1024 instead 768, was observed to pass at least once.
Change-Id: Ida3800afcda67d529e3b1cf48ca4a3f0fa48b2c5
Reviewed-on: https://go-review.googlesource.com/16201
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Chase <drchase@google.com>
The reg-reg version compiled to PSRAW, not PSRLW (arithmetic
instead of logical shift right).
Fixes#13010.
Change-Id: I69a47bd83c8bbe66c7f8d82442ab45e9bf3b94fb
Reviewed-on: https://go-review.googlesource.com/16168
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Shared libraries on ppc64le will require a larger minimum stack frame (because
the ABI mandates that the TOC pointer is available at 24(R1)). Part 2a of
preparing for that is to have all bits of arch-independent and ppc64-specific
codegen that need to know call a function to find out.
Change-Id: I55899f73037e92227813c491049a3bd6f30bd41f
Reviewed-on: https://go-review.googlesource.com/15524
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Replace the confusing game where a frame size of $-8 would suppress the
implicit setting up of a stack frame with a nice explicit flag.
The code to set up the function prologue is still a little confusing but better
than it was.
Change-Id: I1d49278ff42c6bc734ebfb079998b32bc53f8d9a
Reviewed-on: https://go-review.googlesource.com/15670
Reviewed-by: Minux Ma <minux@golang.org>
Due to #9401, trailing empty fields will occupy at least 1 byte
of space.
Fixes#12884.
Change-Id: I838d3f1a73637e526f5a6dbc348981227d5bb2fd
Reviewed-on: https://go-review.googlesource.com/15660
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
obj.ProgInfo is a field inside obj.Prog, which is currently 320 bytes
on 64bit platforms. By moving the Flags field below the other fields
the size of obj.Prog drops into the 288 byte size class, a saving of
32 bytes per value allocated on the heap.
Change-Id: If8bb12f45328996d7df1d0bac9d1c019d2af73bd
Reviewed-on: https://go-review.googlesource.com/15522
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
It's particularly nice to get rid of the android special cases in the linker.
Change-Id: I516363af7ce8a6b2f196fe49cb8887ac787a6dad
Reviewed-on: https://go-review.googlesource.com/14197
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This lets us re-enable duffzero.
Fixes#12108
Change-Id: Iefd24d26eaa56067caa2c29ff99cd20a42d8714a
Reviewed-on: https://go-review.googlesource.com/14937
Reviewed-by: Keith Randall <khr@golang.org>
For variables which get SSA'd, SSA keeps track of all the def/kill.
It is only for on-stack variables that we need them.
This reduces stack frame sizes significantly because often the
only use of a variable was a varkill, and without that last use
the variable doesn't get allocated in the frame at all.
Fixes#12602
Change-Id: I3f00a768aa5ddd8d7772f375b25f846086a3e689
Reviewed-on: https://go-review.googlesource.com/14758
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This has been the root cause of a number of crashes caused by
fuzz throwing modem noise at the assembler, which in turn attempts
to print diagnostics but instead just gets crashes.
Fixes#12627.
Change-Id: I72c2da79d8eb240e1a37aa6140454c552b05e0f1
Reviewed-on: https://go-review.googlesource.com/14595
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For now, we only use typedmemmove. This can be optimized
in future CLs.
Also add a feature to help with binary searching bad compilations.
Together with GOSSAPKG, GOSSAHASH specifies the last few binary digits
of the hash of function names that should be compiled. So
GOSSAHASH=0110 means compile only those functions whose last 4 bits
of hash are 0110. By adding digits to the front we can binary search
for the function whose SSA-generated code is causing a test to fail.
Change-Id: I5a8b6b70c6f034f59e5753965234cd42ea36d524
Reviewed-on: https://go-review.googlesource.com/14530
Reviewed-by: Keith Randall <khr@golang.org>
Simplify slice/map literal expressions.
Caught with gofmt -d -s, fixed with gofmt -w -s
Checked that the result can still be compiled with Go 1.4.
Change-Id: I0a6773d12200a7b43491f25f914335069a1fa5e8
Reviewed-on: https://go-review.googlesource.com/13833
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
this leaves lots of cruft behind, will delete that soon
Change-Id: I12d6b6192f89bcdd89b2b0873774bd3458373b8a
Reviewed-on: https://go-review.googlesource.com/14196
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Following on from CL 14350, remove the remaining dead code from data.go.
Also leave a TODO to be addressed later (with a unit test) to reduce
the overhead of SymGrow.
Change-Id: Iebad775b1280b54b89e87a3a073ca8af19a8bfba
Reviewed-on: https://go-review.googlesource.com/14359
Run-TryBot: Dave Cheney <dave@cheney.net>
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently Go produces shared libraries that cannot be shared between processes
because they have relocations against the text segment (not text section). This
fixes this by moving some data to sections with magic names recognized by the
static linker.
The change in genasmsym to add STYPELINK to the switch should fix things on
darwin/arm64.
Fixes#10914
Updates #9210
Change-Id: Iab4a6678dd04cec6114e683caac5cf31b1063309
Reviewed-on: https://go-review.googlesource.com/14306
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Just a mechanical copy with filename renames, no code changes.
This is to reduce code difference when adding the mips64 port.
Change-Id: Id06e975f414a7b09f4827167b30813b228a3bfae
Reviewed-on: https://go-review.googlesource.com/14323
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This reverts commit 2c2cbb69c8.
Broke darwin/arm64
Change-Id: Ibd2dea475d6ce6a8b4b40e2da19a83fc0514025d
Reviewed-on: https://go-review.googlesource.com/14301
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently Go produces shared libraries that cannot be shared between processes
because they have relocations against the text segment (not text section). This
fixes this by moving some data to sections with magic names recognized by the
static linker.
Fixes#10914
Updates #9210
Change-Id: I7178daadc0ae87953d5a084aa3d580f4e3b46d47
Reviewed-on: https://go-review.googlesource.com/10300
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Also simplifies some silliness around making the .tbss section wrt internal
vs external linking. The "make TLS make sense" project has quite a few more
steps to go.
Issue #11270
Change-Id: Ia4fa135cb22d916728ead95bdbc0ebc1ae06f05c
Reviewed-on: https://go-review.googlesource.com/13990
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Nothing uses it any more.
Change-Id: I42ee7222b06b1a79b8b44894f3071752f9166d7a
Reviewed-on: https://go-review.googlesource.com/14193
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
liblink was rewriting xor by a negative zero (used by SSA
for negation) as XORPS reg,reg.
Fixes strconv.
Change-Id: I627a0a7366618e6b07ba8f0ad0db0e102340c5e3
Reviewed-on: https://go-review.googlesource.com/14200
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Update #10994
CASE and BCASE were used by 5c in switch statements, cmd/compile
does not use them.
Change-Id: I7a578c461b52b94690e35460926849b28971b770
Reviewed-on: https://go-review.googlesource.com/14009
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixes#10994
CASE and BCASE were used by 7c in switch statements, cmd/compile
does not use them, cmd/assemble couldn't assemble them, and the arm64
peephole optimiser didn't know about them.
Change-Id: Id04835fcb37e207f76d211ce54a4db9c057d6112
Reviewed-on: https://go-review.googlesource.com/14100
Reviewed-by: Aram Hăvărneanu <aram@mgk.ro>
Run-TryBot: Aram Hăvărneanu <aram@mgk.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
And clean up the mess on arm64 (the mess on arm is too confusing).
See issue #10050
Change-Id: I2ce813fe8646d4e818eb660612a7e4b2bb04de4c
Reviewed-on: https://go-review.googlesource.com/13884
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is an initial implementation.
There are many rough edges and TODOs,
which will hopefully be polished out
with use.
Fixes#12071.
Change-Id: I1d6fd5a343063b5200623bceef2c2cfcc885794e
Reviewed-on: https://go-review.googlesource.com/13472
Reviewed-by: Keith Randall <khr@golang.org>
The code already fixed large non-stack offsets
but explicitly excluded stack references.
Perhaps you could get away with that before,
but current versions of nacl reject such stack
references. Rewrite them the same as the others.
For #11956 but probably not the last problem.
Change-Id: I0db4e3a1ed4f88ccddf0d30228982960091d9fb7
Reviewed-on: https://go-review.googlesource.com/13010
Reviewed-by: Dave Cheney <dave@cheney.net>
Instead of pushing the denominator argument on the stack,
the denominator is now passed in m.
This fixes a variety of bugs related to trying to take stack traces
backwards from the middle of the software div/mod routines.
Some of those bugs have been kludged around in the past,
but others have not. Instead of trying to patch up after breaking
the stack, this CL stops breaking the stack.
This is an update of https://golang.org/cl/19810043,
which was rolled back in https://golang.org/cl/20350043.
The problem in the original CL was that there were divisions
at bad times, when m was not available. These were divisions
by constant denominators, either in C code or in assembly.
The Go compiler knows how to generate division by multiplication
for constant denominators, but the C compiler did not.
There is no longer any C code, so that's taken care of.
There was one problematic DIV in runtime.usleep (assembly)
but https://golang.org/cl/12898 took care of that one.
So now this approach is safe.
Reject DIV/MOD in NOSPLIT functions to keep them from
coming back.
Fixes#6681.
Fixes#6699.
Fixes#10486.
Change-Id: I09a13c76ad08ba75b3bd5d46a3eb78e66a84ab38
Reviewed-on: https://go-review.googlesource.com/12899
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If a function is large enough to need to flush the constant pool
mid-function, the line number assignment code was forcing the
line numbers not just for the constant pool but for all the instructions
that follow it. This made the line number information completely
wrong for all but the beginning of large functions on arm.
Same problem in code copied into arm64.
This broke runtime/trace's TestTraceSymbolize.
Fixes arm build.
Change-Id: I84d9fb2c798c4085f69b68dc766ab4800c7a6ca4
Reviewed-on: https://go-review.googlesource.com/12894
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
The layout code has to date insisted on stack frames that are 16-aligned
including the saved LR, and it ensured this by growing the frame itself.
This breaks code that refers to values near the top of the frame by positive
offset from SP, and in general it's too magical: if you see TEXT xxx, $N,
you expect that the frame size is actually N, not sometimes N and sometimes N+8.
This led to a serious bug in the compiler where ambiguously live values
were not being zeroed correctly, which in turn triggered an assertion
in the GC about finding only valid pointers. The compiler has been
fixed to always emit aligned frames, and the hand-written assembly
has also been fixed.
Now that everything is aligned, make unaligned an error instead of
something to "fix" silently.
For #9880.
Change-Id: I05f01a9df174d64b37fa19b36a6b6c5f18d5ba2d
Reviewed-on: https://go-review.googlesource.com/12848
Reviewed-by: Austin Clements <austin@google.com>
Same as we do for string symbols.
Fixes#11583.
Change-Id: Ia9264f6faf486697d987051b7f9851d37d8ad381
Reviewed-on: https://go-review.googlesource.com/12531
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This seems to have broken arm64 in a mysterious way. Will try again later.
This reverts commit 0a3c991fd3.
Change-Id: Ic1b53413c4168977a27381d9cc6fb8d9d7cbb780
Reviewed-on: https://go-review.googlesource.com/12245
Reviewed-by: Russ Cox <rsc@golang.org>
When the prologue call to morestack was moved down to the
bottom of the function, the pc/sp tables were not updated.
If a traceback through a call to morestack is needed, it would
get confused at and stop at morestack.
Confirmed the fix by adding //go:systemstack (which calls
morestackc, but same issue) where it did not belong
and inspecting the crash.
Change-Id: Id0294bb9dba51ef1a49154637228fb57f1086a94
Reviewed-on: https://go-review.googlesource.com/12144
Reviewed-by: Rob Pike <r@golang.org>
The old numerical names like 6.out.go are a relic from the old tools.
Easier to rename than explain.
The anames.go files were modified by go generate; no changes
beyond the explanatory comment at the top.
Change-Id: I84742c75c60e47724baa9d49a91fef1f8581f021
Reviewed-on: https://go-review.googlesource.com/12069
Run-TryBot: Rob Pike <r@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
It looks like the test for whether symbols contain subsymbols is wrong.
In particular, symbols in C libraries are mistakenly considered container
symbols.
Fix the test so only symbols which actually have a subsymbol
are excluded from the symtab. When linking cgo programs the list
of containers is small, something like:
container _/home/khr/sandbox/symtab/misc/cgo/test(.text)<74>
container _/home/khr/sandbox/symtab/misc/cgo/test/issue8828(.text)<75>
container _/home/khr/sandbox/symtab/misc/cgo/test/issue9026(.text)<76>
container runtime/cgo(.text)<77>
I'm not sure this is the right fix. In particular I can't reproduce
the original problem. Anyone have a repro they can try and see if
this fix works?
Fixes#10747Fixes#11396
Change-Id: Id8b016389d33348b4a791fdcba0f9db8ae71ebf3
Reviewed-on: https://go-review.googlesource.com/11652
Reviewed-by: Russ Cox <rsc@golang.org>
These were found by grepping the comments from the go code and feeding
the output to aspell.
Change-Id: Id734d6c8d1938ec3c36bd94a4dbbad577e3ad395
Reviewed-on: https://go-review.googlesource.com/10941
Reviewed-by: Aamir Khan <syst3m.w0rm@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
obj.ARET is the portable return mnemonic. ppc64.ARETURN is a legacy
alias.
This was done with
sed -i s/ppc64\.ARETURN/obj.ARET/ cmd/compile/**/*.go
sed -i s/ARETURN/obj.ARET/ cmd/internal/obj/ppc64/obj9.go
Change-Id: I4d8e83ff411cee764774a40ef4c7c34dcbca4e43
Reviewed-on: https://go-review.googlesource.com/10673
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
They're each architecture-specific.
Let them share.
Reduces Prog size to 288, which is the
next smaller malloc class.
Reduces inuse_space while compiling the
rotate tests by ~3.2%.
Change-Id: Ica8ec90e466c97b569745fffff0e5acd364e55fa
Reviewed-on: https://go-review.googlesource.com/10514
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
That which cannot happen has not happened.
No immediate changes to Addr or Prog size.
Change-Id: I4cb9315f2c9f5f92eda340bfc4abb46395fa467f
Reviewed-on: https://go-review.googlesource.com/10513
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Printed and Width were unused.
Despite only removing two bytes, due to alignment, 8 bytes are saved
on 64-bit:
Before: unsafe.Sizeof(obj.Prog{}) == 304
After: unsafe.Sizeof(obj.Prog{}) == 296
The next size class below 320 (304=>19(320)) is 288. Still 8 bytes
away from that.
Change-Id: I8d1632dd40d387f7036c03c65ea4d64e9b6218c3
Reviewed-on: https://go-review.googlesource.com/10511
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
It is almost never set and Addr is large, so having the full struct
in the Prog wastes memory most of the time.
Before (on a 64-bit system):
$ sizeof -p cmd/internal/obj Addr Prog
Addr 80
Prog 376
$
After:
$ sizeof -p cmd/internal/obj Addr Prog
Addr 80
Prog 304
$
Change-Id: I491f201241f87543964a7d0f48b85830759be9d0
Reviewed-on: https://go-review.googlesource.com/10457
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Semi-regular merge of tip to dev.ssa.
Complicated a bit by the move of cmd/internal/* to cmd/compile/internal/*.
Change-Id: I1c66d3c29bb95cce4a53c5a3476373aa5245303d
It shrinks Prog type from 448 bytes down to 376 bytes on amd64.
It also makes sense, because I don't know of any modern architecture
that have instructions which can write to two destinations, none of
which is a register (even x86 doesn't have such instructions).
Change-Id: I3061f1c9ac93d79ee2b92ecb9049641d0e0f6300
Reviewed-on: https://go-review.googlesource.com/10330
Reviewed-by: Aram Hăvărneanu <aram@mgk.ro>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Russ Cox <rsc@golang.org>
Add & as an input op. Add several output ops (loads & stores, TESTB,
LEAQglobal, branches, memcopy)
Some other small things:
- Add exprAddr to builder to generate addresses of expressions. Use it in
various places that had ad-hoc code.
- Separate out nil & bounds check generation to separate functions.
- Add explicit FP and SP ops so we dont need specialized *FP and *SP opcodes.
- Fix fallthrough at end of functions with no return values.
- rematerialization of more opcodes.
Change-Id: I781decfcef9770fb15f0cd6b061547f7824a2d5e
Reviewed-on: https://go-review.googlesource.com/10213
Reviewed-by: Alan Donovan <adonovan@google.com>
F3t was effectively a local variable.
Remove it.
This shrinks obj.Prog from 456 to 448 bytes,
which places it in a smaller malloc class.
This reduces the memory usage of the compiler
while compiling the rotate tests by ~2.75%.
Change-Id: I31cc9dd67269851a430b56bcc7d255c9349eb522
Reviewed-on: https://go-review.googlesource.com/10255
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
I was previously setting GOARM=arm5 (due to confusion with previously
seeing buildall.sh's temporary of "arm5" as a GOARCH and
misremembernig), but GOARM=arm5 was acting like GOARM=5 only on
accident. See https://go-review.googlesource.com/#/c/10023/
Instead, fail if GOARM is not a known value.
Change-Id: I9ba4fd7268df233d40b09f0431f37cd85a049847
Reviewed-on: https://go-review.googlesource.com/10024
Reviewed-by: Minux Ma <minux@golang.org>
The type information in reflect.Type and the GC programs is now
1 bit per word, down from 2 bits.
The in-memory unrolled type bitmap representation are now
1 bit per word, down from 4 bits.
The conversion from the unrolled (now 1-bit) bitmap to the
heap bitmap (still 4-bit) is not optimized. A followup CL will
work on that, after the heap bitmap has been converted to 2-bit.
The typeDead optimization, in which a special value denotes
that there are no more pointers anywhere in the object, is lost
in this CL. A followup CL will bring it back in the final form of
heapBitsSetType.
Change-Id: If61e67950c16a293b0b516a6fd9a1c755b6d5549
Reviewed-on: https://go-review.googlesource.com/9702
Reviewed-by: Austin Clements <austin@google.com>
Update #10652
This proposal deletes cmd/internal/ld.Biobuf and replaces all uses with
cmd/internal/obj.Biobuf. As cmd/internal/ld already imported cmd/internal/obj
there are no additional dependencies created.
Notes:
- ld.Boffset included more checks, so it was merged into obj.Boffset
- obj.Bflush was removed in 8d16253c90, so replaced all calls to
ld.Bflush, with obj.Biobuf.Flush.
- Almost all of this change was prepared with sed.
Change-Id: I814854d52f5729a5a40c523c8188e465246b88da
Reviewed-on: https://go-review.googlesource.com/9660
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Dave Cheney <dave@cheney.net>
This change applies CL 9365 to the copy of Biobuf in cmd/internal/obj.
In the process I discovered that some of the methods that should have been
checking the unget buffer before reading were not and it was probably just
dumb luck that we handn't hit these issues before; Bungetc is only used in
one place in cmd/internal/gc and only an unlikely code path.
Change-Id: Ifa0c5c08442e9fe951a5078c6e9ec77a8a4dc2ff
Reviewed-on: https://go-review.googlesource.com/9529
Reviewed-by: Daniel Morsing <daniel.morsing@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
Run-TryBot: Dave Cheney <dave@cheney.net>
This is a follow up to rev 443a32e707 which reduces some of the
duplication between methods and functions that operate on obj.Biobuf.
obj.Biobuf has Flush and Write methods as well as helpers which duplicate
those methods, consolidate on the former and remove the latter.
Also, address a final comment from CL 9525.
Change-Id: I67deaf3a163bb489a9bb21bb39524785d7a2f6c5
Reviewed-on: https://go-review.googlesource.com/9527
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Kind of a hack, but makes the non-optimized builds pass.
Fixes#10079
Change-Id: I26f41c546867f8f3f16d953dc043e784768f2aff
Reviewed-on: https://go-review.googlesource.com/9552
Reviewed-by: Russ Cox <rsc@golang.org>
When reading the object files for linking, liblink takes care of
generate the data for them.
This is a port of https://golang.org/cl/3101 to Go.
Change-Id: Ie3e2d6515bd7d253a8c1e25c70ef8fed064436d8
Signed-off-by: Shenghou Ma <minux@golang.org>
Reviewed-on: https://go-review.googlesource.com/8383
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This started out as trying to remove Bool2int calls, which it does a bit, but
mostly it ended up being removing the Link.Symmorestack array which seemed a
pointless bit of caching.
Change-Id: I91a51eb08cb4b08f3f9f093b575306499267b67a
Reviewed-on: https://go-review.googlesource.com/9239
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The long comment block in obj6.go:progedit talked about the two code sequences
for accessing g as "local exec" and "initial exec", but really they are both forms
of local exec. This stuff is confusing enough without using the wrong words for
things, so rewrite it to talk about 2-instruction and 1-instruction sequences.
Unfortunately the confusion has made it into code, with the R_TLS_IE relocation
now doing double duty as meaning actual initial exec when externally linking and
boring old local exec when linking internally (half of this is my fault). So this
stops using R_TLS_IE in the local exec case. There is a chance this might break
plan9 or windows, but I don't think so. Next step is working out what the heck is
going on on ARM...
Change-Id: I09da4388210cf49dbc99fd25f5172bbe517cee57
Reviewed-on: https://go-review.googlesource.com/9273
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
This lets us avoid loading string constants via the GOT and (together with
http://golang.org/cl/9102) results in the fannkuch benchmark having very similar
register usage with -dynlink as without.
Change-Id: Ic3892b399074982b76773c3e547cfbba5dabb6f9
Reviewed-on: https://go-review.googlesource.com/9103
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
There were 10 implementations of the trivial bool2int function, 9 of which
were the only thing in their file. Remove all of them in favor of one in
cmd/internal/obj.
Change-Id: I9c51d30716239df51186860b9842a5e9b27264d3
Reviewed-on: https://go-review.googlesource.com/9230
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This reduces the number of allocations in the compiler
while building the stdlib by 15.66%.
No functional changes. Passes toolstash -cmp.
Change-Id: Ia21b37134a8906a4e23d53fdc15235b4aa7bbb34
Reviewed-on: https://go-review.googlesource.com/9085
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
They don't really make any sense on this side of the compiler/linker divide.
Some of the code touching these fields was the support for R_TLS when
thechar=='6' which turns out to be dead and so I just removed all of that.
Change-Id: I4e265613c4e7fcc30a965fffb7fd5f45017f06f3
Reviewed-on: https://go-review.googlesource.com/9107
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
http://golang.org/cl/7623 refactored how line history works and
introduced a new TrimPathPrefix field to replace the existing Trimpath
field, but never removed the latter or updated its users.
Fixes#10503.
Change-Id: Ief90a55b6cef2e8062b59856a4c7dcc0df01d3f2
Reviewed-on: https://go-review.googlesource.com/9113
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
To support "SVC $0x80", which is needed for darwin/arm64.
Change-Id: I3b3f80791a1db4c2b7318f81a115972cd2237f00
Signed-off-by: Shenghou Ma <minux@golang.org>
Reviewed-on: https://go-review.googlesource.com/8769
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Just like darwin/arm, cannot fork..
Change-Id: If565afbceb79013b9e3103e1e28d93691e9fc0a5
Reviewed-on: https://go-review.googlesource.com/8826
Reviewed-by: Minux Ma <minux@golang.org>
While here, this changes DWAbbrev's attr field from a [30]DWAttrForm
with zero-termination to a simple []DWAttrForm, and updates its users
accordingly.
Passes "go build -toolexec 'toolstash -cmp' -a std" on linux/amd64.
Change-Id: I52b5f7a749bdb3e7588fc8ebdb8fee2cf8cab602
Reviewed-on: https://go-review.googlesource.com/8762
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
Jumping to an offset past a symbol isn't something that is really
supported by dynamic linkers, so do it by hand.
Change-Id: Ifff8834c6cdfa3d521ebd8479d2e93906df9b258
Reviewed-on: https://go-review.googlesource.com/8238
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
If GOBIN is not empty the build moves the go executable
to a new path. When this test runs it fails to find the
go cmd in the GOROOT.
Change-Id: I100def0fbcb9691b13776f795b1d1725e36d8102
Reviewed-on: https://go-review.googlesource.com/8735
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL introduces R_ADDRARM64, which is similar to R_ADDRPOWER.
Fixes#10112.
Change-Id: I309e3df7608b9eef9339196fdc50dedf5f9439f1
Reviewed-on: https://go-review.googlesource.com/8438
Reviewed-by: Aram Hăvărneanu <aram@mgk.ro>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
A quick pass through link.go, mostly removing fields that are not
used on the "creating a single object file" side of the fence.
Change-Id: I35ba41378c2c418f7df2f2f88dce65bc64a1a45d
Reviewed-on: https://go-review.googlesource.com/7672
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The c2go translation left a lot of case expressions on separate lines.
Merge expressions onto single lines subject to these constraints:
* Max 4 clauses, all literals or names
* Don't move expressions with comments
The change was created by running http://play.golang.org/p/yHajs72h-g:
$ mergecase cmd/internal/{ld,gc,obj}/*.go cmd/internal/obj/*/*.go
Passes toolstash -cmp.
Change-Id: Iba41b390d302e5486e5dc6ba7599a92270676556
Reviewed-on: https://go-review.googlesource.com/7593
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
A residue of the automatic translation, this closure is easily rewritten
to a simpler, smaller, and faster construct.
Discovered while analyzing #10269, which I still plan to fix.
Change-Id: I76b12290280d81880c446b4cf75da633a94482d4
Reviewed-on: https://go-review.googlesource.com/8270
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Minux Ma <minux@golang.org>
This CL moves the bulk of the code that has been copy-and-pasted
since the initial 386 port back into a shared place, cutting 5 copies to 1.
The motivation here is not cleanup per se but instead to reduce the
cost of introducing changes in shared concepts like regalloc or general
expression evaluation. For example, a change after this one will
implement x.(*T) without a call into the runtime. This CL makes that
followup work 5x easier.
The single copy still has more special cases for architecture details
than I'd like, but having them called out explicitly like this at least
opens the door to generalizing the conditions and smoothing out
the distinctions in the future.
This is a LARGE CL. I started by trying to pull in one function at a time
in a sequence of CLs and it became clear that everything was so
interrelated that it had to be moved as a whole. Apologies for the size.
It is not clear how many more releases this code will matter for;
eventually it will be replaced by Keith's SSA work. But as noted above,
the deduplication was necessary to reduce the cost of working on
the current code while we have it.
Passes tests on amd64, 386, arm, and ppc64le.
Can build arm64 binaries but not tested there.
Being able to build binaries means it is probably very close.
Change-Id: I735977f04c0614f80215fb12966dfe9bbd1f5861
Reviewed-on: https://go-review.googlesource.com/7853
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The ProgInfo is loaded many times during each analysis pass.
Load it once at the beginning (in Flowstart if using that, or explicitly,
as in plive.go) and then refer to the cached copy.
Removes many calls to proginfo.
Makes Prog a little bigger, but the previous CL more than compensates.
Change-Id: If90a12fc6729878fdae10444f9c3bedc8d85026e
Reviewed-on: https://go-review.googlesource.com/7745
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
An interface{} is more in the spirit of the original union.
By my calculations, on 64-bit systems this reduces
Addr from 120 to 80 bytes, and Prog from 592 to 424 bytes.
Change-Id: I0d7b0981513c2a3c94c9ac76bb4f8816485b5a3c
Reviewed-on: https://go-review.googlesource.com/7744
Reviewed-by: Rob Pike <r@golang.org>
I think the file ended up in the order of the typedefs instead of the
order of the actual struct definitions. You can see where some of
the declarations were because some of the comments didn't move.
Put things back in the original order.
Change-Id: I0e3703008278b084b632c917cfb73bc81bdd4f23
Reviewed-on: https://go-review.googlesource.com/7743
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
- avoid copy in range ytab
- add fast path to prefixof
Change-Id: I88aa9d91a0abe80d253f7c3bca950b4613297499
Reviewed-on: https://go-review.googlesource.com/7628
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
These were introduced during C -> Go translation when the loop increment
contained multiple statements.
Change-Id: Ic8abd8dcb3308851a1f7024de00711f0f984e684
Reviewed-on: https://go-review.googlesource.com/7627
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Rob Pike <r@golang.org>
In addition to possibly being clearer code,
this replaces an O(n) lookup with an O(log n) lookup.
Change-Id: I0a574c536a965a87f7ad6dcdcc30f737bc771cd5
Reviewed-on: https://go-review.googlesource.com/7623
Reviewed-by: Rob Pike <r@golang.org>
ARM64 (ARMv8) has 32 general purpose, 64-bit integer registers
(R0-R31), 32 64-bit scalar floating point registers (F0-F31), and
32 128-bit vector registers (unused, V0-V31).
R31 is either the stack pointer (RSP), or the zero register (ZR),
depending on the instruction. Note the distinction between the
hardware stack pointer, RSP, and the virtual stack pointer SP.
The (hardware) stack pointer must be 16-byte aligned at all times;
the RSP register itself must be aligned, offset(RSP) only has to
have natural alignment.
Instructions are fixed-width, and are 32-bit wide. ARM64 supports
ARMv7 too (32-bit ARM), but not in the same process. In general,
there is not much in common between 32-bit ARM and ARM64, it's a
new architecture.
All implementations have floating point instructions.
This change adds a Prog.To3 field analogous to Prog.To. It is used
by exclusive load/store instructions such as STLXR which read from
one register, and write to both a register and a memory address.
STLXRW R1, (R0), R3
This will store the word contained in R1 to the memory address
pointed by R0. R3 will be updated with the status result of the
store. It is used to implement atomic operations.
No other changes are made to the portable Prog and Addr structures.
Change-Id: Ie839029aa5265bbad35769d9689eca11e1c48c47
Reviewed-on: https://go-review.googlesource.com/7046
Reviewed-by: Russ Cox <rsc@golang.org>
Brad Fitzpatrick
David Chase
Michael Matloob
Cherry Zhang
Josh Bleecher Snyder
Michael Pratt
Ilya Tocar
Keith Randall
Lynn Boger
Michael Hudson-Doyle
Russ Cox
Michael Munday
David Crawshaw
Emmanuel Odeke
Cherry Zhang
Zhongwei Yao
Matthew Dempsky
Shahar Kohanim
Dave Cheney
Ryan Brown
Eric Engestrom
Michel Lespinasse
Marvin Stenger
Ian Lance Taylor
Martin Möhrmann
Shawn Smith
Shenghou Ma
sergey.arseev
Hyang-Ah Hana Kim
Robert Griesemer
Rob Pike
Didier Spezia
Todd Neal
Aaron Jacobs
Ainar Garipov
Austin Clements
Daniel Theophanes
Aram Hăvărneanu