Sym.Fsym is used only to avoid adding duplicate
entries to funcsyms, but that is easily
accomplished by detecting the first lookup
vs subsequent lookups of the func sym name.
This avoids creating an unnecessary ONAME node
during funcsym, which eliminates a dependency
in the backend on Curfn and lineno.
It also makes the code a lot simpler and clearer.
Updates #15756
Passes toolstash-check -all.
No compiler performance changes.
funcsymname does generate garbage via string
concatenation, but it is not called very much,
and this CL also eliminates allocation of several
Nodes and Names.
Change-Id: I7116c78fa39d975b7bd2c65a1d228749cf0dd46b
Reviewed-on: https://go-review.googlesource.com/38605
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Clean up code that does interface equality. Avoid doing checks
in efaceeq/ifaceeq that we already did before calling those routines.
No noticeable performance changes for existing benchmarks.
name old time/op new time/op delta
EfaceCmpDiff-8 604ns ± 1% 553ns ± 1% -8.41% (p=0.000 n=9+10)
Fixes#18618
Change-Id: I3bd46db82b96494873045bc3300c56400bc582eb
Reviewed-on: https://go-review.googlesource.com/38606
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
In the future, walk will probably run concurrently
with SSA construction. It is possible for walk
to be walking a function node that is referred
to by another function undergoing SSA construction.
In that case, this particular assignment to n.Type
is race-y.
This assignment is also not necessary;
evconst does not change the type of n.
Both arguments to evconst must have the same type,
and at the end of evconst, n is replaced with n.Left.
Remove the assignment, and add a check to ensure
that its removal remains correct.
Updates #15756
Change-Id: Id95faaff42d5abd76be56445d1d3e285775de8bf
Reviewed-on: https://go-review.googlesource.com/38609
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Avoid construction of incorrect syntax trees in presence of errors.
For #19663.
Change-Id: I43025a3cf0fe02cae9a57e8bb9489b5f628c3fd7
Reviewed-on: https://go-review.googlesource.com/38604
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Simple phi insertion already had a heuristic to check
for dead blocks, namely having no predecessors.
When we stopped generating code for dead blocks,
we eliminated some values contained in more subtle
dead blocks, which confused phi insertion.
Compensate by beefing up the reachability check.
Fixes#19678
Change-Id: I0081e4a46f7ce2f69b131a34a0553874a0cb373e
Reviewed-on: https://go-review.googlesource.com/38602
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
CL 37499 allows inlining more functions by ignoring dead code.
However, that dead code can contain non-exportable constructs.
Teach the exporter not to export dead code.
Fixes#19679
Change-Id: Idb1d3794053514544b6f1035d29262aa6683e1e7
Reviewed-on: https://go-review.googlesource.com/38601
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Almost never happens in practice.
The compiler will generate reasonable code anyway,
since assignments involving [0]T never do any work.
Fixes#19696Fixes#19671
Change-Id: I350d2e0c5bb326c4789c74a046ab0486b2cee49c
Reviewed-on: https://go-review.googlesource.com/38599
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We already handle n << (uint64(c)&63).
This change also handles n << (uint8(c)&63)
where the SSA compiler promotes the counter to 32 bits.
Fixes#19681
Change-Id: I9327d64a994286aa0dbf76eb995578880be6923a
Reviewed-on: https://go-review.googlesource.com/38550
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Pass around the imported package explicitly instead of relying
on a global variable.
Unfortunately we still need a global variable to communicate to
the typechecker that we're in an import, but the semantic load
is significantly reduced as it's just a bool, set/reset in a
couple of places only.
Change-Id: I4ebeae4064eb76ca0c4e2a15e4ca53813f005c29
Reviewed-on: https://go-review.googlesource.com/38595
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
First step towards removing global var importpkg.
Change-Id: Ifdda7c295e5720a7ff2da9baea17f03f190d48fa
Reviewed-on: https://go-review.googlesource.com/38594
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It is currently possible in the compiler to create a struct type,
calculate the widths of types that depend on it,
and then alter the struct type.
transformclosure has local protection against this.
Protect against it at a deeper level.
This is preparation to call dowidth automatically,
rather than explicitly.
Change-Id: Ic1578ca014610197cfe54a9f4d044d122a7217e8
Reviewed-on: https://go-review.googlesource.com/38469
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
In livenessepilogue, if we save liveness information for instructions
before updating liveout, we can avoid an extra bitvector temporary and
some extra copying around.
Passes toolstash-check -all.
Change-Id: I10d5803167ef3eba2e9e95094adc7e3d33929cc7
Reviewed-on: https://go-review.googlesource.com/38408
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
CL 38337 modified canMergeLoad to reject loads with multiple uses
so it is no longer necessary to check this in the SSA rules.
Change-Id: I03498390e778da1be8cb59ae0948e99289008315
Reviewed-on: https://go-review.googlesource.com/38473
Run-TryBot: Michael Munday <munday@ca.ibm.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Introduce a new type, gc.Progs, to manage
generation of Progs for a function.
Use it to replace globals pc and pcloc.
Passes toolstash-check -all.
Updates #15756
Change-Id: I2206998d7c58fe2a76b620904909f2e1cec8a57d
Reviewed-on: https://go-review.googlesource.com/38418
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Regalloc uses loop depths - make sure they are initialized!
Test to make sure we aren't pushing spills into loops.
This fixes a generated-code performance bug introduced with
the better spill placement change:
https://go-review.googlesource.com/c/34822/
Update #19595
Change-Id: Ib9f0da6fb588503518847d7aab51e569fd3fa61e
Reviewed-on: https://go-review.googlesource.com/38434
Reviewed-by: David Chase <drchase@google.com>
We want to merge a load and op into a single instruction
l = LOAD ptr mem
y = OP x l
into
y = OPload x ptr mem
However, all of our OPload instructions require that y uses
the same register as x. If x is needed past this instruction, then
we must copy x somewhere else, losing the whole benefit of merging
the instructions in the first place.
Disable this optimization if x is live past the OP.
Also disable this optimization if the OP is in a deeper loop than the load.
Update #19595
Change-Id: I87f596aad7e91c9127bfb4705cbae47106e1e77a
Reviewed-on: https://go-review.googlesource.com/38337
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
exporter.nesting was added in c7b9bd74 to mitigate #16369 which was
closed in ee272bbf. Remove the exporter.nesting field as it is now unused.
Change-Id: I07873d1a07d6a08b11994b817a1483ffc2f5e45f
Reviewed-on: https://go-review.googlesource.com/38490
Run-TryBot: Dave Cheney <dave@cheney.net>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This simplifies the code and removes a premature optimization.
It increases the amount of allocated syntax.Node space by ~0.4%
for parsing all of std lib, which is negligible.
Before the change (best of 5 runs):
$ go test -run StdLib -fast
parsed 1517022 lines (3394 files) in 793.487886ms (1911840 lines/s)
allocated 387.086Mb (267B/line, 487.828Mb/s)
After the change (best of 5 runs):
$ go test -run StdLib -fast
parsed 1516911 lines (3392 files) in 805.028655ms (1884294 lines/s)
allocated 388.466Mb (268B/line, 482.549Mb/s)
Change-Id: Id19d6210fdc62393862ba3b04913352d95c599be
Reviewed-on: https://go-review.googlesource.com/38439
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This change adds position information for { and } braces in the
source. There's a 1.9% increase in memory use for syntax.Nodes,
which is negligible relative to overall compiler memory consumption.
Parsing the std library (using syntax package only) and memory
consumption before this change (fastest of 5 runs):
$ go test -run StdLib -fast
parsed 1516827 lines (3392 files) in 780.612335ms (1943124 lines/s)
allocated 379.903Mb (486.673Mb/s)
After this change (fastest of 5 runs):
$ go test -run StdLib -fast
parsed 1517022 lines (3394 files) in 793.487886ms (1911840 lines/s)
allocated 387.086Mb (267B/line, 487.828Mb/s)
While not an exact apples-to-apples comparison (the syntax package
has changed and is also parsed), the overall impact is small.
Also: Small improvements to nodes_test.go.
Change-Id: Ib8a7f90bbe79de33d83684e33b1bf8dbc32e644a
Reviewed-on: https://go-review.googlesource.com/38435
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Starting in go1.9, the minimum processor requirement for ppc64 is POWER8.
Therefore, the checks for OldArch and the code enabled by it are not necessary
anymore.
Updates #19074
Change-Id: I33d6a78b2462c80d57c5dbcba2e13424630afab4
Reviewed-on: https://go-review.googlesource.com/38404
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
To enable this, inline the call to nod and simplify.
Eliminates a reference to lineno from the backend.
Passes toolstash-check -all.
Updates #15756
Change-Id: I9c4bd77d10d727aa8f5e6c6bb16b0e05de165631
Reviewed-on: https://go-review.googlesource.com/38441
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Must have been lost when rebasing the SSA liveness CLs.
Change-Id: Iaac33158cc7c92ea44a023c242eb914a7d6979c6
Reviewed-on: https://go-review.googlesource.com/38427
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
I think this got lost in a rebase somewhere.
Updates #15756
Change-Id: Ia3e7c60d1b9254f2877217073732b46c91059ade
Reviewed-on: https://go-review.googlesource.com/38425
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
During AllocFrame, we drop unused variables from Curfn.Func.Dcl, but
there might still be OpVarFoo instructions that reference those
variables. This wasn't a problem though because gvardefx used to emit
ANOP for unused variables instead of AVARFOO.
As an easy fix, if we see OpVarFoo (or OpKeepAlive) referencing an
unused variable, we can ignore it.
Fixes#19632.
Change-Id: I4e9ffabdb4058f7cdcc4663b540f5a5a692daf8b
Reviewed-on: https://go-review.googlesource.com/38400
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
The chanrecv funcs don't use it at all. The chansend ones do, but the
element type is now part of the hchan struct, which is already a
parameter.
hchan can be nil in chansend when sending to a nil channel, so when
instrumenting we must copy to the stack to be able to read the channel
type.
name old time/op new time/op delta
ChanUncontended 6.42µs ± 1% 6.22µs ± 0% -3.06% (p=0.000 n=19+18)
Initially found by github.com/mvdan/unparam.
Fixes#19591.
Change-Id: I3a5e8a0082e8445cc3f0074695e3593fd9c88412
Reviewed-on: https://go-review.googlesource.com/38351
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Removing stray xori that came from big endian copy/paste.
Adding atomicand8 check to runtime.check() that would have revealed
this error.
Might fix#19396.
Change-Id: If8d6f25d3e205496163541eb112548aa66df9c2a
Reviewed-on: https://go-review.googlesource.com/38257
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Prior to this CL, the function's position was used.
The dottype Node's position is clearly better.
I'm not thrilled about introducing a reference to
lineno in the middle of SSA construction;
I will have to remove it later.
My immediate goal is stability and correctness of positions,
though, since that aids refactoring, so this is an improvement.
An example from package io:
func (t *multiWriter) WriteString(s string) (n int, err error) {
var p []byte // lazily initialized if/when needed
for _, w := range t.writers {
if sw, ok := w.(stringWriter); ok {
n, err = sw.WriteString(s)
The w.(stringWriter) type assertion includes loading
the address of static type data for stringWriter:
LEAQ type."".stringWriter(SB), R10
Prior to this CL, this instruction was given the line number
of the function declaration.
After this CL, this instruction is given the line number
of the type assertion itself.
Change-Id: Ifcca274b581a5a57d7e3102c4d7b7786bf307210
Reviewed-on: https://go-review.googlesource.com/38389
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Tested by fixedbugs/issue3705.go.
This removes a dependency on lineno
from near the backend.
Change-Id: I228bd0ad7295cf881b9bdeb0df9d18483fb96821
Reviewed-on: https://go-review.googlesource.com/38382
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This eliminates an old TODO,
and stabilizes the position information
for init functions.
Change-Id: Idf2d9a16a60e097ee08f42541b87e170da2f9d3a
Reviewed-on: https://go-review.googlesource.com/38388
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Previously, we handled recursive interfaces by deferring typechecking
of interface methods, while eagerly expanding interface embeddings.
This CL switches to eagerly evaluating interface methods, and
deferring expanding interface embeddings to dowidth. This allows us to
detect recursive interface embeddings with the same mechanism used for
detecting recursive struct embeddings.
Updates #16369.
Change-Id: If4c0320058047f8a2d9b52b9a79de47eb9887f95
Reviewed-on: https://go-review.googlesource.com/38391
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This CL changes the order that liveness analysis visits CFG blocks to
PC order, rather than RPO. This doesn't meaningfully change anything
except that the PCDATA_StackMapIndex values will be assigned in PC
order too.
However, this does have the benefit that the subsequent CL to port
liveness analysis to the SSA CFG (which has blocks in PC order) will
now pass toolstash-check.
Change-Id: I1de5a2eecb8027723a6e422d46186d0c63d48c8d
Reviewed-on: https://go-review.googlesource.com/38086
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Teach the backend to recognize that the address of a symbol
is equal with itself, and that the addresses of two different
symbols are different.
Some examples of where this rule hits in the standard library:
- inlined uses of (*time.Time).setLoc (e.g. time.UTC)
- inlined uses of bufio.NewReader (via type assertion)
Change-Id: I23dcb068c2ec333655c1292917bec13bbd908c24
Reviewed-on: https://go-review.googlesource.com/38338
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When optimizations are disabled, the compiler
cannot eliminate enough write barriers to satisfy
the runtime's nowritebarrier and nowritebarrierrec
annotations.
Enforce that requirement, and for convenience,
have cmd/go elide -N when compiling the runtime.
This came up in practice for me when running
toolstash -cmp. When toolstash -cmp detected
mismatches, it recompiled with -N, which caused
runtime compilation failures.
Change-Id: Ifcdef22c725baf2c59a09470f00124361508a8f3
Reviewed-on: https://go-review.googlesource.com/38380
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Instead we can use t.nod.Pos.
Change-Id: I643ee3226e402e38d4c77e8f328cbe83e55eac5c
Reviewed-on: https://go-review.googlesource.com/38309
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
CL 27254 changed a constant string to a byte array
in encoding/hex and got significant performance
improvements.
hex.Encode used the string twice in a single function.
The rewrite rules lower constant strings into components.
The pointer component requires an aux symbol.
The existing implementation created a new aux symbol every time.
As a result, constant string pointers were never CSE'd.
Tighten then moved the pointer calculation next to the uses, i.e.
into the loop.
The re-use of aux syms enabled by this CL
occurs 3691 times during make.bash.
This CL should not go in without CL 38338
or something like it.
Change-Id: Ibbf5b17283c0e31821d04c7e08d995c654de5663
Reviewed-on: https://go-review.googlesource.com/28219
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Report syntax error that was missed when moving to new parser.
Fixes#19610.
Change-Id: Ie5625f907a84089dc56fcccfd4f24df546042783
Reviewed-on: https://go-review.googlesource.com/38375
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This makes the overall naming and use of the functions
to create a Type more consistent.
Passes toolstash -cmp.
Change-Id: Ie0d40b42cc32b5ecf5f20502675a225038ea40e4
Reviewed-on: https://go-review.googlesource.com/38354
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
I noted in CL 38327 that the SSA test API felt a bit
clunky after the ssa.Func/ssa.Cache/ssa.Config refactoring,
and promised to clean it up once the dust settled.
The dust has settled.
Along the way, this CL fixes a potential latent bug,
in which the amd64 test context was used for all dummy Syslook calls.
The lone SSA test using the s390x context did not depend on the
Syslook context being correct, so the bug did not arise in practice.
Change-Id: If964251d1807976073ad7f47da0b1f1f77c58413
Reviewed-on: https://go-review.googlesource.com/38346
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Mapping all empty interfaces onto the same Type
allows better reuse of the ptrTo and sliceOf
Type caches for *interface{} and []interface{}.
This has little compiler performance impact now,
but it will be helpful in the future,
when we will eagerly populate some of those caches.
Passes toolstash-check.
Change-Id: I17daee599a129b0b2f5f3025c1be43d569d6782c
Reviewed-on: https://go-review.googlesource.com/38344
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This reduces the number of calls back into the
gc Type routines, which will help performance
in a concurrent backend.
It also reduces the number of callsites
that must be considered in making the transition.
Passes toolstash-check -all. No compiler performance changes.
Updates #15756
Change-Id: Ic7a8f1daac7e01a21658ae61ac118b2a70804117
Reviewed-on: https://go-review.googlesource.com/38340
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Prior to this CL, the ssa.Frontend field was responsible
for providing types to the backend during compilation.
However, the types needed by the backend are few and static.
It makes more sense to use a struct for them
and to hang that struct off the ssa.Config,
which is the correct home for readonly data.
Now that Types is a struct, we can clean up the names a bit as well.
This has the added benefit of allowing early construction
of all types needed by the backend.
This will be useful for concurrent backend compilation.
Passes toolstash-check -all. No compiler performance change.
Updates #15756
Change-Id: I021658c8cf2836d6a22bbc20cc828ac38c7da08a
Reviewed-on: https://go-review.googlesource.com/38336
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
While we're here, also eliminate a few more Curfn uses.
Passes toolstash -cmp. No compiler performance impact.
Updates #15756
Change-Id: Ib8db9e23467bbaf16cc44bf62d604910f733d6b8
Reviewed-on: https://go-review.googlesource.com/38331
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This is a first step towards eliminating the
Curfn global in the backend.
There's more to do.
Passes toolstash -cmp. No compiler performance impact.
Updates #15756
Change-Id: Ib09f550a001e279a5aeeed0f85698290f890939c
Reviewed-on: https://go-review.googlesource.com/38232
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Suggested by mdempsky in CL 38232.
This allows us to use the Frontend field
to associate frontend state and information
with a function.
See the following CL in the series for examples.
This is a giant CL, but it is almost entirely routine refactoring.
The ssa test API is starting to feel a bit unwieldy.
I will clean it up separately, once the dust has settled.
Passes toolstash -cmp.
Updates #15756
Change-Id: I71c573bd96ff7251935fce1391b06b1f133c3caf
Reviewed-on: https://go-review.googlesource.com/38327
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Prior to this CL, config was an explicit argument
to the SSA rewrite rules, and rules that needed
a Frontend got at it via config.
An upcoming CL moves Frontend from Config to Func,
so rules can no longer reach Frontend via Config.
Passing a Frontend as an argument to the rewrite rules
causes a 2-3% regression in compile times.
This CL takes a different approach:
It treats the variable names "config" and "fe"
as special and calculates them as needed.
The "as needed part" is also important to performance:
If they are calculated eagerly, the nilchecks themselves
cause a regression.
This introduces a little bit of magic into the rewrite
generator. However, from the perspective of the rules,
the config variable was already more or less magic.
And it makes the upcoming changes much clearer.
Passes toolstash -cmp.
Change-Id: I173f2bcc124cba43d53138bfa3775e21316a9107
Reviewed-on: https://go-review.googlesource.com/38326
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This CL changes the GOARCH.Init functions to take gc.Thearch as a
parameter, which gc.Main supplies.
Additionally, the x86 backend is refactored to decide within Init
whether to use the 387 or SSE2 instruction generators, rather than for
each individual SSA Value/Block.
Passes toolstash-check -all.
Change-Id: Ie6305a6cd6f6ab4e89ecbb3cbbaf5ffd57057a24
Reviewed-on: https://go-review.googlesource.com/38301
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
I don't know that it exists for any other architectures.
Update #18616
Change-Id: Idfe5dee251764d32787915889ec0be4bebc5be24
Reviewed-on: https://go-review.googlesource.com/38323
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This makes ssa.Func, ssa.Cache, and ssa.Config fulfill
the roles laid out for them in CL 38160.
The only non-trivial change in this CL is how cached
values and blocks get IDs. Prior to this CL, their IDs were
assigned as part of resetting the cache, and only modified
IDs were reset. This required knowing how many values and
blocks were modified, which required a tight coupling between
ssa.Func and ssa.Config. To eliminate that coupling,
we now zero values and blocks during reset,
and assign their IDs when they are used.
Since unused values and blocks have ID == 0,
we can efficiently find the last used value/block,
to avoid zeroing everything.
Bulk zeroing is efficient, but not efficient enough
to obviate the need to avoid zeroing everything every time.
As a happy side-effect, ssa.Func.Free is no longer necessary.
DebugHashMatch and friends now belong in func.go.
They have been left in place for clarity and review.
I will move them in a subsequent CL.
Passes toolstash -cmp. No compiler performance impact.
No change in 'go test cmd/compile/internal/ssa' execution time.
Change-Id: I2eb7af58da067ef6a36e815a6f386cfe8634d098
Reviewed-on: https://go-review.googlesource.com/38167
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
See https://go-review.googlesource.com/#/c/38313/ for background.
It turns out that only a few tests checked for this.
The new error message is shorter and very clear.
Change-Id: I8ab4ad59fb023c8b54806339adc23aefd7dc7b07
Reviewed-on: https://go-review.googlesource.com/38314
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This is an evolution of https://go-review.googlesource.com/33616, as discussed
via email with Robert (gri):
$ cat foobar.go
package main
func main() {
a := "foo", "bar"
}
before:
./foobar.go:4:4: assignment count mismatch: want 1 values, got 2
after:
./foobar.go:4:4: assignment count mismatch: cannot assign 2 values to 1 variables
We could likely also eliminate the "assignment count mismatch" prefix now
without losing any information, but that string is matched by a number of
tests.
Change-Id: Ie6fc8a7bbd0ebe841d53e66e5c2f49868decf761
Reviewed-on: https://go-review.googlesource.com/38313
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
name old time/op new time/op delta
LeadingZeros-4 2.00ns ± 0% 1.34ns ± 1% -33.02% (p=0.000 n=8+10)
LeadingZeros16-4 1.62ns ± 0% 1.57ns ± 0% -3.09% (p=0.001 n=8+9)
LeadingZeros32-4 2.14ns ± 0% 1.48ns ± 0% -30.84% (p=0.002 n=8+10)
LeadingZeros64-4 2.06ns ± 1% 1.33ns ± 0% -35.08% (p=0.000 n=8+8)
8-bit args is a special case - the Go code is really fast because
it is just a single table lookup. So I've disabled that for now.
Intrinsics were actually slower:
LeadingZeros8-4 1.22ns ± 3% 1.58ns ± 1% +29.56% (p=0.000 n=10+10)
Update #18616
Change-Id: Ia9c289b9ba59c583ea64060470315fd637e814cf
Reviewed-on: https://go-review.googlesource.com/38311
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Remove size AuxInt in Store, and alignment in Move/Zero. We still
pass size AuxInt to Move/Zero, as it is used for partial Move/Zero
lowering (e.g. cmd/compile/internal/ssa/gen/386.rules:288).
SizeAndAlign is gone.
Passes "toolstash -cmp" on std.
Change-Id: I1ca34652b65dd30de886940e789fcf41d521475d
Reviewed-on: https://go-review.googlesource.com/38150
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The old writebarrier implementation fails to handle single-block
loop where a memory Phi value depends on the write barrier store
in the same block. The new implementation (CL 36834) doesn't have
this problem. Add a test to ensure it.
Fix#19067.
Change-Id: Iab13c6817edc12be8a048d18699b4450fa7ed712
Reviewed-on: https://go-review.googlesource.com/36940
Reviewed-by: David Chase <drchase@google.com>
Now that the write barrier insertion is moved to SSA, the SSA
building code can be simplified.
Updates #17583.
Change-Id: I5cacc034b11aa90b0abe6f8dd97e4e3994e2bc25
Reviewed-on: https://go-review.googlesource.com/36840
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
When the compiler insert write barriers, the frontend makes
conservative decisions at an early stage. This sometimes have
false positives because of the lack of information, for example,
writes on stack. SSA's writebarrier pass identifies writes on
stack and eliminates write barriers for them.
This CL moves write barrier insertion into SSA. The frontend no
longer makes decisions about write barriers, and simply does
normal assignments and emits normal Store ops when building SSA.
SSA writebarrier pass inserts write barrier for Stores when needed.
There, it has better information about the store because Phi and
Copy propagation are done at that time.
This CL only changes StoreWB to Store in gc/ssa.go. A followup CL
simplifies SSA building code.
Updates #17583.
Change-Id: I4592d9bc0067503befc169c50b4e6f4765673bec
Reviewed-on: https://go-review.googlesource.com/36839
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
For SSA Store/Move/Zero ops, attach the type of the value being
stored to the op as the Aux field. This type will be used for
write barrier insertion (in a followup CL). Since SSA passes
do not accurately propagate types of values (because of type
casting), we can't simply use type of the store's arguments
for write barrier insertion.
Passes "toolstash -cmp" on std.
Updates #17583.
Change-Id: I051d5e5c482931640d1d7d879b2a6bb91f2e0056
Reviewed-on: https://go-review.googlesource.com/36838
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Implement math/bits.TrailingZerosX using intrinsics.
Generally reorganize the intrinsic spec a bit.
The instrinsics data structure is now built at init time.
This will make doing the other functions in math/bits easier.
Update sys.CtzX to return int instead of uint{64,32} so it
matches math/bits.TrailingZerosX.
Improve the intrinsics a bit for amd64. We don't need the CMOV
for <64 bit versions.
Update #18616
Change-Id: Ic1c5339c943f961d830ae56f12674d7b29d4ff39
Reviewed-on: https://go-review.googlesource.com/38155
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The line between ssa.Func and ssa.Config has blurred.
Concurrent compilation in the backend will require more precision.
This CL lays out an (aspirational) organization.
The implementation will come in follow-up CLs,
once the organization is settled.
ssa.Config holds basic compiler configuration,
mostly arch-specific information.
It is configured once, early on, and is readonly,
so it is safe for concurrent use.
ssa.Func is a single-shot object used for
compiling a single Func. It is not concurrency-safe
and not re-usable.
ssa.Cache is a multi-use object used to avoid
expensive allocations during compilation.
Each ssa.Func is given an ssa.Cache to use.
ssa.Cache is not concurrency-safe.
Change-Id: Id02809b6f3541541cac6c27bbb598834888ce1cc
Reviewed-on: https://go-review.googlesource.com/38160
Reviewed-by: Keith Randall <khr@golang.org>
Previously we always issued a spill right after the op
that was being spilled. This CL pushes spills father away
from the generator, hopefully pushing them into unlikely branches.
For example:
x = ...
if unlikely {
call ...
}
... use x ...
Used to compile to
x = ...
spill x
if unlikely {
call ...
restore x
}
It now compiles to
x = ...
if unlikely {
spill x
call ...
restore x
}
This is particularly useful for code which appends, as the only
call is an unlikely call to growslice. It also helps for the
spills needed around write barrier calls.
The basic algorithm is walk down the dominator tree following a
path where the block still dominates all of the restores. We're
looking for a block that:
1) dominates all restores
2) has the value being spilled in a register
3) has a loop depth no deeper than the value being spilled
The walking-down code is iterative. I was forced to limit it to
searching 100 blocks so it doesn't become O(n^2). Maybe one day
we'll find a better way.
I had to delete most of David's code which pushed spills out of loops.
I suspect this CL subsumes most of the cases that his code handled.
Generally positive performance improvements, but hard to tell for sure
with all the noise. (compilebench times are unchanged.)
name old time/op new time/op delta
BinaryTree17-12 2.91s ±15% 2.80s ±12% ~ (p=0.063 n=10+10)
Fannkuch11-12 3.47s ± 0% 3.30s ± 4% -4.91% (p=0.000 n=9+10)
FmtFprintfEmpty-12 48.0ns ± 1% 47.4ns ± 1% -1.32% (p=0.002 n=9+9)
FmtFprintfString-12 85.6ns ±11% 79.4ns ± 3% -7.27% (p=0.005 n=10+10)
FmtFprintfInt-12 91.8ns ±10% 85.9ns ± 4% ~ (p=0.203 n=10+9)
FmtFprintfIntInt-12 135ns ±13% 127ns ± 1% -5.72% (p=0.025 n=10+9)
FmtFprintfPrefixedInt-12 167ns ± 1% 168ns ± 2% ~ (p=0.580 n=9+10)
FmtFprintfFloat-12 249ns ±11% 230ns ± 1% -7.32% (p=0.000 n=10+10)
FmtManyArgs-12 504ns ± 7% 506ns ± 1% ~ (p=0.198 n=9+9)
GobDecode-12 6.95ms ± 1% 7.04ms ± 1% +1.37% (p=0.001 n=10+10)
GobEncode-12 6.32ms ±13% 6.04ms ± 1% ~ (p=0.063 n=10+10)
Gzip-12 233ms ± 1% 235ms ± 0% +1.01% (p=0.000 n=10+9)
Gunzip-12 40.1ms ± 1% 39.6ms ± 0% -1.12% (p=0.000 n=10+8)
HTTPClientServer-12 227µs ± 9% 221µs ± 5% ~ (p=0.114 n=9+8)
JSONEncode-12 16.1ms ± 2% 15.8ms ± 1% -2.09% (p=0.002 n=9+8)
JSONDecode-12 61.8ms ±11% 57.9ms ± 1% -6.30% (p=0.000 n=10+9)
Mandelbrot200-12 4.30ms ± 3% 4.28ms ± 1% ~ (p=0.203 n=10+8)
GoParse-12 3.18ms ± 2% 3.18ms ± 2% ~ (p=0.579 n=10+10)
RegexpMatchEasy0_32-12 76.7ns ± 1% 77.5ns ± 1% +0.92% (p=0.002 n=9+8)
RegexpMatchEasy0_1K-12 239ns ± 3% 239ns ± 1% ~ (p=0.204 n=10+10)
RegexpMatchEasy1_32-12 71.4ns ± 1% 70.6ns ± 0% -1.15% (p=0.000 n=10+9)
RegexpMatchEasy1_1K-12 383ns ± 2% 390ns ±10% ~ (p=0.181 n=8+9)
RegexpMatchMedium_32-12 114ns ± 0% 113ns ± 1% -0.88% (p=0.000 n=9+8)
RegexpMatchMedium_1K-12 36.3µs ± 1% 36.8µs ± 1% +1.59% (p=0.000 n=10+8)
RegexpMatchHard_32-12 1.90µs ± 1% 1.90µs ± 1% ~ (p=0.341 n=10+10)
RegexpMatchHard_1K-12 59.4µs ±11% 57.8µs ± 1% ~ (p=0.968 n=10+9)
Revcomp-12 461ms ± 1% 462ms ± 1% ~ (p=1.000 n=9+9)
Template-12 67.5ms ± 1% 66.3ms ± 1% -1.77% (p=0.000 n=10+8)
TimeParse-12 314ns ± 3% 309ns ± 0% -1.56% (p=0.000 n=9+8)
TimeFormat-12 340ns ± 2% 331ns ± 1% -2.79% (p=0.000 n=10+10)
The go binary is 0.2% larger. Not really sure why the size
would change.
Change-Id: Ia5116e53a3aeb025ef350ffc51c14ae5cc17871c
Reviewed-on: https://go-review.googlesource.com/34822
Reviewed-by: David Chase <drchase@google.com>
Interface wrapper functions now get compiled eagerly in some cases.
Consequently, they may be present in multiple translation units.
Mark them as DUPOK, just like closures.
Fixes#19548Fixes#19550
Change-Id: Ibe74adb5a62dbf6447db37fde22dcbb3479969ef
Reviewed-on: https://go-review.googlesource.com/38156
Reviewed-by: David Chase <drchase@google.com>
In the SSA CFG, TEXT, RET, and JMP instructions correspond to Blocks,
not Values. Rework liveness analysis so that progeffects only cares
about Progs that result from Values, and handle Blocks separately.
Passes toolstash-check -all.
Change-Id: Ic23719c75b0421fdb51382a08dac18c3ba042b32
Reviewed-on: https://go-review.googlesource.com/38085
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
The fmtmode and fmtpkgpfx globals stand in the
way of making the compiler more concurrent (#15756).
This CL removes them.
The natural way to eliminate a global is to explicitly
thread it as a parameter through all function calls.
However, most of the functions in gc/fmt.go
get called indirectly, by way of fmt format strings,
so there's nowhere natural to add a parameter.
Since there are only a few fmtmode modes,
use named types to distinguish between modes.
For example, fmtNodeErr, fmtNodeDbg, and fmtNodeTypeId
are all gc.Node, but they print in different modes.
Varying the type allows us to thread mode through fmt.
Handle fmtpkgpfx by converting it to a printing mode,
FTypeIdName, and using the same type-based approach.
To avoid a loss of readability and danger of bugs
from introducing conversions at all call sites,
instead add a helper that systematically modifies the args.
The only remaining gc/fmt.go global is dumpdepth.
Since that is used for debugging only,
it that can be handled with a global mutex,
or some similarly basic, if inefficient, protection.
Passes toolstash -cmp. No compiler performance impact.
For future reference, other options for threading state
that were considered and rejected:
* Wrapping values in structs, such as:
type fmtNode struct {
n *Node
mode fmtMode
}
This reduces the proliferation of types, and supports
easily adding extra local parameters.
However, putting such a struct into an interface{} allocates.
This is unacceptable in this particular area of code.
* Passing state via precision, such as:
fmt.Fprintf("%*v", mode, n)
where mode is the state encoded as an integer.
This avoids extra allocations, but it is out of keeping
with the intended semantics of precision, and is less readable.
* Modify the fmt package to support setting/getting context
via fmt.State. Unavailable due to Go 1 compatibility,
and probably the wrong solution anyway.
* Give up on package fmt. This would be a huge readability
regression and cause high code churn.
* Attempt a de-novo rewrite that circumvents these problems.
Too high a risk of bugs, with insufficient reward for the effort,
particularly since long term plans call for elimination
of gc.Node.
Change-Id: Iea2440d5a34a938e64273707de27e3a897cb41d1
Reviewed-on: https://go-review.googlesource.com/38147
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
With this change, code like
h := sha1.New()
h.Write(buf)
sum := h.Sum()
gets compiled into static calls rather than
interface calls, because the compiler is able
to prove that 'h' is really a *sha1.digest.
The InterCall re-write rule hits a few dozen times
during make.bash, and hundreds of times during all.bash.
The most common pattern identified by the compiler
is a constructor like
func New() Interface { return &impl{...} }
where the constructor gets inlined into the caller,
and the result is used immediately. Examples include
{sha1,md5,crc32,crc64,...}.New, base64.NewEncoder,
base64.NewDecoder, errors.New, net.Pipe, and so on.
Some existing benchmarks that change on darwin/amd64:
Crc64/ISO4KB-8 2.67µs ± 1% 2.66µs ± 0% -0.36% (p=0.015 n=10+10)
Crc64/ISO1KB-8 694ns ± 0% 690ns ± 1% -0.59% (p=0.001 n=10+10)
Adler32KB-8 473ns ± 1% 471ns ± 0% -0.39% (p=0.010 n=10+9)
On architectures like amd64, the reduction in code size
appears to contribute more to benchmark improvements than just
removing the indirect call, since that branch gets predicted
accurately when called in a loop.
Updates #19361
Change-Id: I57d4dc21ef40a05ec0fbd55a9bb0eb74cdc67a3d
Reviewed-on: https://go-review.googlesource.com/38139
Run-TryBot: Philip Hofer <phofer@umich.edu>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Changes to ${GOARCH}Ops.go files were mechanically produced using
github.com/mdempsky/ssa-symops, a one-off tool that inserts
"SymEffect: X" elements by pattern matching against the Op names.
Change-Id: Ibf3e481ffd588647f2a31662d72114b740ccbfcf
Reviewed-on: https://go-review.googlesource.com/38084
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
To replace the progeffects tables for liveness analysis.
Change-Id: Idc4b990665cb0a9aa300d62cdf8ad12e51c5b991
Reviewed-on: https://go-review.googlesource.com/38083
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Bad pragmas should never make it to the backend.
I've confirmed manually that the error position is unchanged.
Updates #15756
Updates #19250
Change-Id: If14f7ce868334f809e337edc270a49680b26f48e
Reviewed-on: https://go-review.googlesource.com/38152
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
There were a surprising number of places
in the tree that used yyerror for failed internal
consistency checks. Switch them to Fatalf.
Updates #15756
Updates #19250
Change-Id: Ie4278148185795a28ff3c27dacffc211cda5bbdd
Reviewed-on: https://go-review.googlesource.com/38153
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This reverts commit 4e0c7c3f61.
Reason for revert: The presence-of-optimization test program is fragile, breaks under noopt, and might break if the Go libraries are tweaked. It needs to be (re)written without reference to other packages.
Change-Id: I3aaf1ab006a1a255f961a978e9c984341740e3c7
Reviewed-on: https://go-review.googlesource.com/38097
Reviewed-by: Keith Randall <khr@golang.org>
This abstracts creation of ACALL Progs into package gc. The main
benefit of this today is we can refactor away a lot of common
boilerplate code.
Later, once liveness analysis happens on the SSA graph, this will also
provide an easy insertion point for emitting the PCDATA Progs
immediately before call instructions.
Passes toolstash-check -all.
Change-Id: Ia15108ace97201cd84314f1ca916dfeb4f09d61c
Reviewed-on: https://go-review.googlesource.com/38081
Reviewed-by: Keith Randall <khr@golang.org>
Move the zeroing of results earlier. In particular, they need to
come before any move-to-heap operations, as those require allocation.
Those allocations are points at which the GC can see the uninitialized
result slots.
For the function:
func f() (x, y, z *int) {
defer(){}()
escape(&y)
return
}
We used to generate code like this:
x = nil
y = nil
&y = new(int)
z = nil
Now we will generate:
x = nil
y = nil
z = nil
&y = new(int)
Since the fix for #18860, the return slots are always live if there
is a defer, so the former ordering allowed the GC to see junk
in the z slot.
Fixes#19078
Change-Id: I71554ae437549725bb79e13b2c100b2911d47ed4
Reviewed-on: https://go-review.googlesource.com/38133
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The existing implementation started by eliminating
nil checks for OpAddr, OpAddPtr, and OpPhis with
all non-nil args.
However, some OpPhis had all non-nil args,
but their args had not been processed yet.
Pull the OpPhi checks into their own loop,
and repeat until stabilization.
Eliminates a dozen additional nilchecks during make.bash.
Negligible compiler performance impact.
Change-Id: If7b803c3ad7582af7d9867d05ca13e03e109d864
Reviewed-on: https://go-review.googlesource.com/37999
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
With this change, code like
h := sha1.New()
h.Write(buf)
sum := h.Sum()
gets compiled into static calls rather than
interface calls, because the compiler is able
to prove that 'h' is really a *sha1.digest.
The InterCall re-write rule hits a few dozen times
during make.bash, and hundreds of times during all.bash.
The most common pattern identified by the compiler
is a constructor like
func New() Interface { return &impl{...} }
where the constructor gets inlined into the caller,
and the result is used immediately. Examples include
{sha1,md5,crc32,crc64,...}.New, base64.NewEncoder,
base64.NewDecoder, errors.New, net.Pipe, and so on.
Some existing benchmarks that change on darwin/amd64:
Crc64/ISO4KB-8 2.67µs ± 1% 2.66µs ± 0% -0.36% (p=0.015 n=10+10)
Crc64/ISO1KB-8 694ns ± 0% 690ns ± 1% -0.59% (p=0.001 n=10+10)
Adler32KB-8 473ns ± 1% 471ns ± 0% -0.39% (p=0.010 n=10+9)
On architectures like amd64, the reduction in code size
appears to contribute more to benchmark improvements than just
removing the indirect call, since that branch gets predicted
accurately when called in a loop.
Updates #19361
Change-Id: Ia9d30afdd5f6b4d38d38b14b88f308acae8ce7ed
Reviewed-on: https://go-review.googlesource.com/37751
Run-TryBot: Philip Hofer <phofer@umich.edu>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
In Go 1.7 and earlier, gc.exportsize tracked the number of bytes
written through exportf. With the removal of the old exporter in Go 1.8
exportf is only used for printing the build id, and the header and
trailer of the binary export format. The size of the export data is
now returned directly from the exporter and exportsize is never
referenced. Remove it.
Change-Id: Id301144b3c26c9004c722d0c55c45b0e0801a88c
Reviewed-on: https://go-review.googlesource.com/38116
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Minor fix, because it's the right thing to do.
No significant impact.
Change-Id: I2138285d397494daa9a88c414149c2a7860edd7e
Reviewed-on: https://go-review.googlesource.com/38001
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Values have an Aux and an AuxInt.
We're setting AuxInt, not Aux.
Say so.
Change-Id: I41aa783273bb7e1ba47c941aa4233f818e37dadd
Reviewed-on: https://go-review.googlesource.com/37997
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Compiler errors now show the exact line and line byte offset (sometimes
called "column") of where an error occured. For `go tool compile x.go`:
package p
const c int = false
//line foo.go:123
type t intg
reports
x.go:2:7: cannot convert false to type int
foo.go:123[x.go:4:8]: undefined: intg
(Some errors use the "wrong" position for the error message; arguably
the byte offset for the first error should be 15, the position of 'false',
rathen than 7, the position of 'c'. But that is an indepedent issue.)
The byte offset (column) values are measured in bytes; they start at 1,
matching the convention used by editors and IDEs.
Positions modified by //line directives show the line offset only for the
actual source location (in square brackets), not for the "virtual" file and
line number because that code is likely generated and the //line directive
only provides line information.
Because the new format might break existing tools or scripts, printing
of line offsets can be disabled with the new compiler flag -C. We plan
to remove this flag eventually.
Fixes#10324.
Change-Id: I493f5ee6e78457cf7b00025aba6b6e28e50bb740
Reviewed-on: https://go-review.googlesource.com/37970
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
We could leave it alone and fix line offset (column) numbers when
reporting errors, but that is likely to cause confusion (internal
numbers don't match reported numbers). Instead, switch to default
numbering starting at 1.
For package syntax-internal use only, introduced constants defining
the line and column bases, and use them throughout the code and its
tests. It is possible to change these constants and package syntax
will continue to work. But changing them is going to break any client
that makes explicit assumptions about line and column numbers (which
is "all of them").
Change-Id: Ia3d136a8ec8d9372ed9c05ca47d3dff222cf030e
Reviewed-on: https://go-review.googlesource.com/37996
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This change adds a method to replace expressions
of the form
v.Args[len(v.Args)-1]
so that the code's intention to walk memory arguments
is explicit.
Passes toolstash-check.
Change-Id: I0c80d73bc00989dd3cdf72b4f2c8e1075a2515e0
Reviewed-on: https://go-review.googlesource.com/37757
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The type of the OffPtr for the first field was incorrect. It should
have been a pointer to the field type, rather than the field
type itself.
Fixes#19475.
Change-Id: I3960b404da0f4bee759331126cce6140d2ce1df7
Reviewed-on: https://go-review.googlesource.com/37869
Run-TryBot: Michael Munday <munday@ca.ibm.com>
Reviewed-by: Keith Randall <khr@golang.org>
Previously the base register was unset, which lead to the disassembler
using "FP" instead of "SP" as the base register. That lead to some
confusion as to what the difference betweeen the two was.
Be consistent and always use SP.
Fixes#19458
Change-Id: Ie8f8ee54653bd202c0cf6fbf1d350e3c8c8b67a0
Reviewed-on: https://go-review.googlesource.com/37971
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
After benchmarking with a compiler modified to have better
spill location, it became clear that this method of checking
was actually faster on (at least) two different architectures
(ppc64 and amd64) and it also provides more timely interruption
of loops.
This change adds a modified FOR loop node "FORUNTIL" that
checks after executing the loop body instead of before (i.e.,
always at least once). This ensures that a pointer past the
end of a slice or array is not made visible to the garbage
collector.
Without the rescheduling checks inserted, the restructured
loop from this change apparently provides a 1% geomean
improvement on PPC64 running the go1 benchmarks; the
improvement on AMD64 is only 0.12%.
Inserting the rescheduling check exposed some peculiar bug
with the ssa test code for s390x; this was updated based on
initial code actually generated for GOARCH=s390x to use
appropriate OpArg, OpAddr, and OpVarDef.
NaCl is disabled in testing.
Change-Id: Ieafaa9a61d2a583ad00968110ef3e7a441abca50
Reviewed-on: https://go-review.googlesource.com/36206
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The position information recorded now consists of the line-
directive relative filename and line number. It would be
relatively easy to also encode absolute position information
as necessary (by serializing src.PosBase data).
For example, given $GOROOT/src/tmp/x.go:
package p
const C0 = 0
//line c.go:10
const C1 = 1
//line t.go:20
type T int
//line v.go:30
var V T
//line f.go:40
func F() {}
The recorded positions for the exported entities are:
C0 $GOROOT/src/tmp/x.go 3
C1 c.go 10
T t.go 20
V v.go 30
F f.go 40
Fix verified by manual inspection. There's currently no easy way
to test this, but it will eventually be tested when we fix#7311.
Fixes#19391.
Change-Id: I6269067ea58358250fe6dd1f73bdf9e5d2adfe3d
Reviewed-on: https://go-review.googlesource.com/37936
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Several SSA ops will always behave identically regardless of target
architecture, so handle those within gc/ssa.go instead.
Passes toolstash-check -all.
Change-Id: I54d514e80ab86723e44332a5a38e3054cbca8c5d
Reviewed-on: https://go-review.googlesource.com/37931
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This commit reworks multiway select statements to use normal control
flow primitives instead of the previous setjmp/longjmp-like behavior.
This simplifies liveness analysis and should prevent issues around
"returns twice" function calls within SSA passes.
test/live.go is updated because liveness analysis's CFG is more
representative of actual control flow. The case bodies are the only
real successors of the selectgo call, but previously the selectsend,
selectrecv, etc. calls were included in the successors list too.
Updates #19331.
Change-Id: I7f879b103a4b85e62fc36a270d812f54c0aa3e83
Reviewed-on: https://go-review.googlesource.com/37661
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
When defining an int const, the compiler tries to cast the RHS
expression to int. The cast may fail for three reasons:
1. expr is an integer constant that overflows int
2. expr is a floating point constant
3. expr is a complex constant, or not a number
In the second case, in order to print a sensible error message, we
must distinguish between a floating point constant that should be
included in the error message and a floating point constant that
cannot be reasonably formatted for inclusion in an error message.
For example, in:
const a int = 1.1
const b int = 1 + 1e-100
a is in the former group, while b is in the latter, since the floating
point value resulting from the evaluation of the rhs of the assignment
(1.00...01) is too long to be fully printed in an error message, and
cannot be shortened without making the error message misleading
(rounding or truncating it would result in a "1", which looks like an
integer constant, and it makes little sense in an error message about
an invalid floating point expression).
To fix this problem, we try to format the float value using fconv
(which is used by the error reporting mechanism to format float
arguments), and then parse the resulting string back to a
big.Float. If the result is an integer, we assume that expr is a float
value that cannot be reasonably be formatted as a string, and we emit
an error message that does not include its string representation.
Also, change the error message for overflows to a more conservative
"integer too large", which does not mention overflows that are only
caused by an internal implementation restriction.
Also, change (*Mpint) SetFloat so that it returns a bool (instead of
0/-1 for success/failure).
Fixes#11371
Change-Id: Ibbc73e2ed2eaf41f07827b0649d0eb637150ecaa
Reviewed-on: https://go-review.googlesource.com/35411
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Instead of skipping them based on string matching much later in the
compilation process, skip them up front using the proper API.
Passes toolstash-check.
Change-Id: Ibd4c0448a0701ba0de3235d4689ef300235fa1d9
Reviewed-on: https://go-review.googlesource.com/37930
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
No need to keep as Nodes when they're all Types anyway.
Change-Id: I8157914ba5b09cadf2263247844680a60233a0f2
Reviewed-on: https://go-review.googlesource.com/37886
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This reverts commit cb6e0639fb.
The fix is incorrect as it's perfectly fine to refer to an
identifier 'init' inside a function, and 'init' may even be
a variable of function value. Misspelling 'init' in that
context would lead to an incorrect error message.
Reopened#8481.
Change-Id: I49787fdf7738213370ae6f0cab54013e9e3394a8
Reviewed-on: https://go-review.googlesource.com/37876
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Given
(Store [c] (OffPtr <T1> [0] (Addr <T> _)) _
(Store [c] (Addr <T> _) _ _))
dead store elimination doesn't eliminate the inner
Store, because it addresses a type of a different width
than the first store.
When decomposing StructMake operations, always generate
an OffPtr to address struct fields so that dead stores to
the first field of the struct can be optimized away.
benchmarks affected on darwin/amd64:
HTTPClientServer-8 73.2µs ± 1% 72.7µs ± 1% -0.69% (p=0.022 n=9+10)
TimeParse-8 304ns ± 1% 300ns ± 0% -1.61% (p=0.000 n=9+9)
RegexpMatchEasy1_32-8 80.1ns ± 0% 79.5ns ± 1% -0.84% (p=0.000 n=8+9)
GobDecode-8 6.78ms ± 0% 6.81ms ± 1% +0.46% (p=0.000 n=9+10)
Gunzip-8 36.1ms ± 1% 36.2ms ± 0% +0.37% (p=0.019 n=10+10)
JSONEncode-8 15.6ms ± 0% 15.7ms ± 0% +0.69% (p=0.000 n=9+10)
Change-Id: Ia80d73fd047f9400c616ca64fdee4f438a0e7f21
Reviewed-on: https://go-review.googlesource.com/37769
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Shrinks LSym somewhat for non-STEXT LSyms, which are much more common.
While here, switch to tracking Automs in a slice instead of a linked
list. (Previously, this would have made LSyms larger.)
Passes toolstash-check.
Change-Id: I082e50e1d1f1b544c9e06b6e412a186be6a4a2b5
Reviewed-on: https://go-review.googlesource.com/37872
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
By clearing out t.nod in copytype, we effectively lose the reference
from a Type back to its declaring OTYPE Node. This means later in
typenamesym when we add typenod(t) to signatlist, we end up creating a
new OTYPE Node. Moreover, this Node's position information will depend
on whatever context it happens be needed, and will be used for the
Type's position in the export data.
Updates #19391.
Change-Id: Ied93126449f75d7c5e3275cbdcc6fa657a8aa21d
Reviewed-on: https://go-review.googlesource.com/37870
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This makes Sym flags consistent with the rest of the code after
the CL 37445.
No functional changes.
Passes toolstash -cmp.
Change-Id: Ica919f2ab98581371c717fff9a70aeb11058ca17
Reviewed-on: https://go-review.googlesource.com/37847
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Change-Id: I6343c162e27e2e492547c96f1fc504909b1c03c0
Reviewed-on: https://go-review.googlesource.com/37793
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The assembler back end uses F15 as a temporary register in these
instructions.
Checked the assembler back end and made sure that this is the
only case clobbering F15.
Fixes#19403.
Change-Id: I02b9e00fdd9229db899f501c8e9b306e02912d83
Reviewed-on: https://go-review.googlesource.com/37792
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Match more patterns generated by the compiler where the index for
a bound check is bounded through a AND operation, with different
register sizes.
These rules trigger a dozen of times in a bootstrap.
Change-Id: Ic9fff16f21d08580f19a366c3ee1a372e58357d1
Reviewed-on: https://go-review.googlesource.com/37442
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
It was used with Node.Ullman, which is now gone.
Change-Id: I83b167645659ae7ef70043b7915d642e42ca524f
Reviewed-on: https://go-review.googlesource.com/37761
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Since switching to SSA, the only remaining use for the Ullman field
was in tracking whether or not an expression contained a function
call. Give it a new name and encode it in our fancy new bitset field.
Passes toolstash-check.
Change-Id: I95b7f9cb053856320c0d66efe14996667e6011c2
Reviewed-on: https://go-review.googlesource.com/37721
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
For example, `-d pctab=pctoinline` prints the PC-inline table and
inlining tree for every function.
Change-Id: Ia6b9ce4d83eed0b494318d40ffe06481ec5d58ab
Reviewed-on: https://go-review.googlesource.com/37235
Run-TryBot: David Lazar <lazard@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Without this, literals keep their original source positions through
inlining, which results in strange jumps in line numbers of inlined
function bodies. By copying literals, inlining can update their source
position like other nodes.
Fixes#15453.
Change-Id: Iad5d9bbfe183883794213266dc30e31bab89ee69
Reviewed-on: https://go-review.googlesource.com/37232
Run-TryBot: David Lazar <lazard@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
In order to generate accurate tracebacks, the runtime needs to know the
inlined call stack for a given PC. This creates two tables per function
for this purpose. The first table is the inlining tree (stored in the
function's funcdata), which has a node containing the file, line, and
function name for every inlined call. The second table is a PC-value
table that maps each PC to a node in the inlining tree (or -1 if the PC
is not the result of inlining).
To give the appearance that inlining hasn't happened, the runtime also
needs the original source position information of inlined AST nodes.
Previously the compiler plastered over the line numbers of inlined AST
nodes with the line number of the call. This meant that the PC-line
table mapped each PC to line number of the outermost call in its inlined
call stack, with no way to access the innermost line number.
Now the compiler retains line numbers of inlined AST nodes and writes
the innermost source position information to the PC-line and PC-file
tables. Some tools and tests expect to see outermost line numbers, so we
provide the OutermostLine function for displaying line info.
To keep track of the inlined call stack for an AST node, we extend the
src.PosBase type with an index into a global inlining tree. Every time
the compiler inlines a call, it creates a node in the global inlining
tree for the call, and writes its index to the PosBase of every inlined
AST node. The parent of this node is the inlining tree index of the
call. -1 signifies no parent.
For each function, the compiler creates a local inlining tree and a
PC-value table mapping each PC to an index in the local tree. These are
written to an object file, which is read by the linker. The linker
re-encodes these tables compactly by deduplicating function names and
file names.
This change increases the size of binaries by 4-5%. For example, this is
how the go1 benchmark binary is impacted by this change:
section old bytes new bytes delta
.text 3.49M ± 0% 3.49M ± 0% +0.06%
.rodata 1.12M ± 0% 1.21M ± 0% +8.21%
.gopclntab 1.50M ± 0% 1.68M ± 0% +11.89%
.debug_line 338k ± 0% 435k ± 0% +28.78%
Total 9.21M ± 0% 9.58M ± 0% +4.01%
Updates #19348.
Change-Id: Ic4f180c3b516018138236b0c35e0218270d957d3
Reviewed-on: https://go-review.googlesource.com/37231
Run-TryBot: David Lazar <lazard@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
The Zero op right after newobject has been removed. But this rule
does not cover Store of constant zero (for SSA-able types). Add
rules to cover Store op as well.
Updates #19027.
Change-Id: I5d2b62eeca0aa9ce8dc7205b264b779de01c660b
Reviewed-on: https://go-review.googlesource.com/36836
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
On amd64p32, PtrSize and RegSize don't agree, and function return
value is aligned with RegSize. Fix this rule. Other architectures
are not affected, where PtrSize and RegSize are the same.
Change-Id: If187d3dfde3dc3b931b8e97db5eeff49a781551b
Reviewed-on: https://go-review.googlesource.com/37720
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Previously the compiler rewrote constant division into OHMUL
operations, but that rewriting was moved to SSA in CL 37015. Now OHMUL
is unused, so we can get rid of it.
Change-Id: Ib6fc7c2b6435510bafb5735b3b4f42cfd8ed8cdb
Reviewed-on: https://go-review.googlesource.com/37750
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
The compiler's -d flag accepts string-valued flags, but currently only
for SSA debug flags. Extend it to support string values for other
flags. This also makes the syntax somewhat more sane so flag=value and
flag:value now both accept integers and strings.
Change-Id: Idd144d8479a430970cc1688f824bffe0a56ed2df
Reviewed-on: https://go-review.googlesource.com/37345
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
A value is "volatile" if it is a pointer to the argument region
on stack which will be clobbered by function call. This is used
to make sure the value is safe when inserting write barrier calls.
The writebarrier pass can tell whether a value is such a pointer.
Therefore no need to mark it when building SSA and thread this
information through.
Passes "toolstash -cmp" on std.
Updates #17583.
Change-Id: Idc5fc0d710152b94b3c504ce8db55ea9ff5b5195
Reviewed-on: https://go-review.googlesource.com/36835
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This is now handled by os/exec.
Updates #12868
Change-Id: Ic21a6ff76a9b9517437ff1acf3a9195f9604bb45
Reviewed-on: https://go-review.googlesource.com/37698
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This adds the necessary changes so that atomics are treated as
intrinsics on ppc64x.
The implementations of And8 and Or8 require power8 for
both ppc64 and ppc64le. This is a new requirement
for ppc64.
Fixes#8739
Change-Id: Icb85e2755a49166ee3652668279f6ed5ebbca901
Reviewed-on: https://go-review.googlesource.com/36832
Reviewed-by: Keith Randall <khr@golang.org>
This makes a change in the SSA code generated for OpPPC64Xf2i64
and OpPPC64Xi2f64 to use register based instructions to convert
between float and integer. This will require at least power8.
Currently the conversion is done by storing to and loading
from memory, which is more expensive.
This improves some of the math functions:
BenchmarkExp-128 74.1 66.8 -9.85%
BenchmarkExpGo-128 87.4 66.3 -24.14%
BenchmarkExp2-128 72.2 64.3 -10.94%
BenchmarkExp2Go-128 74.3 65.9 -11.31%
BenchmarkLgamma-128 51.0 39.7 -22.16%
BenchmarkLog-128 42.9 40.6 -5.36%
BenchmarkLogb-128 11.5 9.16 -20.35%
BenchmarkLog1p-128 38.9 36.2 -6.94%
BenchmarkSin-128 29.5 23.7 -19.66%
BenchmarkTan-128 32.8 27.4 -16.46%
Fixes#18922
Change-Id: I8e1cf14d3880d7cd720dc5188dd174cba1f7fef7
Reviewed-on: https://go-review.googlesource.com/36725
Reviewed-by: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
Reviewed-by: Keith Randall <khr@golang.org>
The builtin runtime package definitions intentionally diverge from the
actual runtime package's, but this only works as long as they never
overlap.
To make it easier to expand the builtin runtime package, this CL now
loads their definitions into a logically separate "go.runtime"
package. By resetting the package's Prefix field to "runtime", any
references to builtin definitions will still resolve against the real
package runtime.
Fixes#14482.
Passes toolstash -cmp.
Change-Id: I539c0994deaed4506a331f38c5b4d6bc8c95433f
Reviewed-on: https://go-review.googlesource.com/37538
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Link.Plists never contained more than one Plist, and sometimes none.
Passing around the Plist being worked on is straightforward and makes
the data flow easier to follow.
Change-Id: I79cb30cb2bd3d319fdbb1dfa5d35b27fcb748e5c
Reviewed-on: https://go-review.googlesource.com/37169
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
There's no need to use @block rules, as canMergeLoad makes sure that
the load and op are already in the same block.
With no @block needed, we also don't need to set the type explicitly.
It can just be inherited from the op being rewritten.
Noticed while working on #19284.
Change-Id: Ied8bcc8058260118ff7e166093112e29107bcb7e
Reviewed-on: https://go-review.googlesource.com/37585
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
runtime.memclr* functions have signatures
func memclrNoHeapPointers(ptr unsafe.Pointer, n uintptr)
func memclrHasPointers(ptr unsafe.Pointer, n uintptr)
Update compiler's copy. Also teach gc/mkbuiltin.go to handle
unsafe.Pointer. The import statement and its support is not
really necessary, but just to make it look like real Go code.
Fixes#19185.
Change-Id: I251d02571fde2716d4727e31e04d56ec04b6f22a
Reviewed-on: https://go-review.googlesource.com/37257
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Explcitly block fused multiply-add pattern matching when a cast is used
after the multiplication, for example:
- (a * b) + c // can emit fused multiply-add
- float64(a * b) + c // cannot emit fused multiply-add
float{32,64} and complex{64,128} casts of matching types are now kept
as OCONV operations rather than being replaced with OCONVNOP operations
because they now imply a rounding operation (and therefore aren't a
no-op anymore).
Operations (for example, multiplication) on complex types may utilize
fused multiply-add and -subtract instructions internally. There is no
way to disable this behavior at the moment.
Improves the performance of the floating point implementation of
poly1305:
name old speed new speed delta
64 246MB/s ± 0% 275MB/s ± 0% +11.48% (p=0.000 n=10+8)
1K 312MB/s ± 0% 357MB/s ± 0% +14.41% (p=0.000 n=10+10)
64Unaligned 246MB/s ± 0% 274MB/s ± 0% +11.43% (p=0.000 n=10+10)
1KUnaligned 312MB/s ± 0% 357MB/s ± 0% +14.39% (p=0.000 n=10+8)
Updates #17895.
Change-Id: Ia771d275bb9150d1a598f8cc773444663de5ce16
Reviewed-on: https://go-review.googlesource.com/36963
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Fix up and enable a few rules.
They trigger a handful of times in std,
despite the frontend handling.
Change-Id: I83378c057cbbc95a4f2b58cd8c36aec0e9dc547f
Reviewed-on: https://go-review.googlesource.com/37227
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
A type conversion inserted between MOVD{LT,LE,GT,GE,EQ,NE} and CMPWconst
by CL 36256 broke the rewrite rule designed to merge the two.
This results in simple for loops (e.g. for i := 0; i < N; i++ {})
emitting two comparisons instead of one, plus a conditional move.
This CL explicitly types the input to CMPWconst so that the type conversion
can be omitted. It also adds a test to check that conditional moves aren't
emitted for loops with 'less than' conditions (i.e. i < N) on s390x.
Fixes#19227.
Change-Id: Ia39e806ed723791c3c755951aef23f957828ea3e
Reviewed-on: https://go-review.googlesource.com/37334
Reviewed-by: Keith Randall <khr@golang.org>
This is the escape analysis analog of CL 37499.
Fixes#12397Fixes#16871
The only "moved to heap" decisions eliminated by this
CL in std+cmd are:
cmd/compile/internal/gc/const.go:1514: moved to heap: ac
cmd/compile/internal/gc/const.go:1515: moved to heap: bd
cmd/compile/internal/gc/const.go:1516: moved to heap: bc
cmd/compile/internal/gc/const.go:1517: moved to heap: ad
cmd/compile/internal/gc/const.go:1546: moved to heap: ac
cmd/compile/internal/gc/const.go:1547: moved to heap: bd
cmd/compile/internal/gc/const.go:1548: moved to heap: bc
cmd/compile/internal/gc/const.go:1549: moved to heap: ad
cmd/compile/internal/gc/const.go:1550: moved to heap: cc_plus
cmd/compile/internal/gc/export.go:162: moved to heap: copy
cmd/compile/internal/gc/mpfloat.go:66: moved to heap: b
cmd/compile/internal/gc/mpfloat.go:97: moved to heap: b
Change-Id: I0d420b69c84a41ba9968c394e8957910bab5edea
Reviewed-on: https://go-review.googlesource.com/37508
Reviewed-by: David Chase <drchase@google.com>
Keep liveness bit vectors as simple live-variable vectors during
liveness analysis. We can defer expanding them into runtime heap
bitmaps until we're actually writing out the symbol data, and then we
only need temporary memory to expand one bitmap at a time.
This is logically cleaner (e.g., we no longer depend on stack frame
layout during analysis) and saves a little bit on allocations.
name old alloc/op new alloc/op delta
Template 41.4MB ± 0% 41.3MB ± 0% -0.28% (p=0.000 n=60+60)
Unicode 32.6MB ± 0% 32.6MB ± 0% -0.11% (p=0.000 n=59+60)
GoTypes 119MB ± 0% 119MB ± 0% -0.35% (p=0.000 n=60+59)
Compiler 483MB ± 0% 481MB ± 0% -0.47% (p=0.000 n=59+60)
name old allocs/op new allocs/op delta
Template 381k ± 1% 380k ± 1% -0.32% (p=0.000 n=60+60)
Unicode 325k ± 1% 325k ± 1% ~ (p=0.867 n=60+60)
GoTypes 1.16M ± 0% 1.15M ± 0% -0.40% (p=0.000 n=60+59)
Compiler 4.22M ± 0% 4.19M ± 0% -0.61% (p=0.000 n=59+60)
Passes toolstash -cmp.
Change-Id: I8175efe55201ffb5017f79ae6cb90df03f1b7e99
Reviewed-on: https://go-review.googlesource.com/37458
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Constant evaluation provides some rudimentary
knowledge of dead code at inlining decision time.
Use it.
This CL addresses only dead code inside if statements.
For statements are never inlined anyway,
and dead code inside for statements is rare.
Analyzing switch statements is worth doing,
but it is more complicated, since we would have
to evaluate each case; leave it for later.
Fixes#9274
After this CL, the following functions in std+cmd
can be newly inlined:
cmd/internal/obj/x86/asm6.go:3122: can inline subreg
cmd/vendor/golang.org/x/arch/x86/x86asm/decode.go:172: can inline instPrefix
cmd/vendor/golang.org/x/arch/x86/x86asm/decode.go:202: can inline truncated
go/constant/value.go:234: can inline makeFloat
go/types/labels.go:52: can inline (*block).insert
math/big/float.go:231: can inline (*Float).Sign
math/bits/bits.go:57: can inline OnesCount
net/http/server.go:597: can inline (*Server).newConn
runtime/hashmap.go:1165: can inline reflect_maplen
runtime/proc.go:207: can inline os_beforeExit
runtime/signal_unix.go:55: can inline init.5
runtime/stack.go:1081: can inline gostartcallfn
Change-Id: I4c92fb96aa0c3d33df7b3f2da548612e79b56b5b
Reviewed-on: https://go-review.googlesource.com/37499
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Follow-up to CL 37270.
This considerably reduces the time to run the test.
Before:
real 0m7.638s
user 0m14.341s
sys 0m2.244s
After:
real 0m4.867s
user 0m7.107s
sys 0m1.842s
Change-Id: I8837a5da0979a1c365e1ce5874d81708249a4129
Reviewed-on: https://go-review.googlesource.com/37461
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Munday <munday@ca.ibm.com>
New special case for booleans and byte-sized integer types
converted to interfaces needs to ensure that the operand is
not too complex, if it were to appear in a parameter list
for example.
Added test, also increased the recursive node dump depth to
a level that was actually useful for an actual bug.
Fixes#19275.
Change-Id: If36ac3115edf439e886703f32d149ee0a46eb2a5
Reviewed-on: https://go-review.googlesource.com/37470
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Add Set3 function to complement existing Set1 and Set2 functions.
Consistently use Set1, Set2 and Set3 for []*Node instead of Set where applicable.
Add SetFirst and SetSecond for setting elements of []*Node to mirror
First and Second for accessing elements in []*Node.
Replace uses of Index by First and Second and
SetIndex with SetFirst and SetSecond where applicable.
Passes toolstash -cmp.
Change-Id: I8255aae768cf245c8f93eec2e9efa05b8112b4e5
Reviewed-on: https://go-review.googlesource.com/37430
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TestAssembly was very slow, leading to it being skipped by default.
This is not surprising, it separately invoked the compiler and
parsed the result many times.
Now the test assembles one source file for arch/os combination,
containing the relevant functions.
Tests for each arch/os run in parallel.
Now the test runs approximately 10x faster on my Intel(R) Core(TM)
i5-6600 CPU @ 3.30GHz.
Fixes#18966
Change-Id: I45ab97630b627a32e17900c109f790eb4c0e90d9
Reviewed-on: https://go-review.googlesource.com/37270
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
CL 35562 substituted zerobase for the pointer for
interfaces containing zero-sized values.
However, it failed to evaluate the zero-sized value
expression for side-effects. Fix that.
The other similar interface value optimizations
are not affected, because they all actually use the
value one way or another.
Fixes#19246
Change-Id: I1168a99561477c63c29751d5cd04cf81b5ea509d
Reviewed-on: https://go-review.googlesource.com/37395
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The new syntax tree introduced with 1.8 represents send statements
(ch <- x) as statements; the old syntax tree represented them as
expressions (and parsed them as such) but complained if they were
used in expression context. As a consequence, some of the errors
that in the past were of the form "ch <- x used as value" now look
like "unexpected <- ..." because a "<-" is not valid according to
Go syntax in those situations. Accept the new error message.
Also: Fine-tune handling of misformed for loop headers.
Also: Minor cleanups/better comments.
Fixes#17590.
Change-Id: Ia541dea1f2f015c1b21f5b3ae44aacdec60a8aba
Reviewed-on: https://go-review.googlesource.com/37386
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The loop-A-encloses-loop-C code did not properly handle the
case where really C was already known to be enclosed by B,
and A was nearest-outer to B, not C.
Fixes#19217.
Change-Id: I755dd768e823cb707abdc5302fed39c11cdb34d4
Reviewed-on: https://go-review.googlesource.com/37340
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Avoid printing a second error message when a field of an undefined
variable is accessed.
Fixes#8440.
Change-Id: I3fe0b11fa3423cec3871cb01b5951efa8ea7451a
Reviewed-on: https://go-review.googlesource.com/36751
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When set to false, the -dolinkobj flag instructs the compiler
not to generate or emit linker information.
This is handy when you need the compiler's export data,
e.g. for use with go/importer,
but you want to avoid the cost of full compilation.
This must be used with care, since the resulting
files are unusable for linking.
This CL interacts with #18369,
where adding gcflags and ldflags to buildid has been mooted.
On the one hand, adding gcflags would make safe use of this
flag easier, since if the full object files were needed,
a simple 'go install' would fix it.
On the other hand, this would mean that
'go install -gcflags=-dolinkobj=false' would rebuild the object files,
although any existing object files would probably suffice.
Change-Id: I8dc75ab5a40095c785c1a4d2260aeb63c4d10f73
Reviewed-on: https://go-review.googlesource.com/37384
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Replaces pairs of shifts with sign/zero extension where possible.
For example:
(uint64(x) << 32) >> 32 -> uint64(uint32(x))
Reduces the execution time of the following code by ~4.5% on s390x:
for i := 0; i < N; i++ {
x += (uint64(i)<<32)>>32
}
Change-Id: Idb2d56f27e80a2e1366bc995922ad3fd958c51a7
Reviewed-on: https://go-review.googlesource.com/37292
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Fixes#19012.
Fallback to return signatures without detailed types.
These error message will be of the form of issue:
* https://golang.org/issues/4215
* https://golang.org/issues/6750
So:
func f(x int, y uint) {
return x > y
}
f(10, "a" < 3)
will give errors:
too many errors to return
too many arguments in call to f
instead of:
too many errors to return
have (<T>)
want ()
too many arguments in call to f
have (number, <T>)
want (number, number)
Change-Id: I680abc7cdd8444400e234caddf3ff49c2d69f53d
Reviewed-on: https://go-review.googlesource.com/36806
Reviewed-by: Robert Griesemer <gri@golang.org>
Keith pointed out that these rules should zero extend during the review
of CL 36845. In practice the generic rules are responsible for eliminating
most load-hit-stores and they do not have this problem. When the s390x
rules are triggered any cast following the elided load-hit-store is
kept because of the sequence the rules are applied in (i.e. the load is
removed before the zero extension gets a chance to be merged into the load).
It is therefore not clear that this issue results in any functional bugs.
This CL includes a test, but it only tests the generic rules currently.
Change-Id: Idbc43c782097a3fb159be293ec3138c5b36858ad
Reviewed-on: https://go-review.googlesource.com/37154
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Added a flag to generic and various architectures' atomic
operations that are judged to have observable side effects
and thus cannot be dead-code-eliminated.
Test requires GOMAXPROCS > 1 without preemption in loop.
Fixes#19182.
Change-Id: Id2230031abd2cca0bbb32fd68fc8a58fb912070f
Reviewed-on: https://go-review.googlesource.com/37333
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The definition of writeBarrier in the runtime was changed in CL 22855
to include padding. Update the definition built in to the compiler to match.
This doesn't affect the generated code, as the compiler sets the type
to use anyhow, but having them be different seems clearly wrong.
Change-Id: I8eac05bf70a424a0b2338ba5e9e41af231316de0
Reviewed-on: https://go-review.googlesource.com/37377
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The type of the OffPtr should be consistent with the type of the
following load. Before this CL it was typed as a pointer to the
struct.
Fixes#19164.
Change-Id: Ibcdec4411c6f719702f76f8dba3cce8691bfbe0c
Reviewed-on: https://go-review.googlesource.com/37254
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
storeOrder visits values in DFS order. It should "break" after
pushing one argument to stack, instead of "continue".
Fixes#19179.
Change-Id: I561afb44213df40ebf8bf7d28e0fd00f22a81ac0
Reviewed-on: https://go-review.googlesource.com/37250
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
Change list https://golang.org/cl/37015/ moved the optimization
of division by constants to the generic ssa backend.
This removes the old now unused code that was used
for this optimization outside of the ssa backend.
Change-Id: I86223e56742e48dbb372ba8d779681e66448c513
Reviewed-on: https://go-review.googlesource.com/37198
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
XCHG needs to allow the stack pointer as an argument because we have a
rewrite that incorporates the address of a local variable into the
instruction.
Fixes#19184
Change-Id: Ic438e6e1946332cdce3864d15abecd41b911b2a9
Reviewed-on: https://go-review.googlesource.com/37253
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
On AMD64 Most operation can have one operand in memory.
Combine load and dependand operation into one new operation,
where possible. I've seen no significant performance changes on go1,
but this allows to remove ~1.8kb code from go tool. And in math package
I see e. g.:
Remainder-6 70.0ns ± 0% 64.6ns ± 0% -7.76% (p=0.000 n=9+1
Change-Id: I88b8602b1d55da8ba548a34eb7da4b25d59a297e
Reviewed-on: https://go-review.googlesource.com/36793
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The type of an intermediate multiply was wrong. When that
intermediate multiply was spilled, the top 32 bits were lost.
Fixes#19153
Change-Id: Ib29350a4351efa405935b7f7ee3c112668e64108
Reviewed-on: https://go-review.googlesource.com/37212
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
We can immediately emit static assignment data rather than queueing
them up to be processed during SSA building.
Passes toolstash -cmp.
Change-Id: I8bcea4b72eafb0cc0b849cd93e9cde9d84f30d5e
Reviewed-on: https://go-review.googlesource.com/37024
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
The rules for folding addresses into load/stores checks sym1 is
not on stack (because the stack offset is not known at that point).
But sym1 could be nil, which invalidates the check. Check merged
sym instead.
Fixes#19137.
Change-Id: I8574da22ced1216bb5850403d8f08ec60a8d1005
Reviewed-on: https://go-review.googlesource.com/37145
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
These seem not to really matter, but good to be correct.
Change-Id: I02edb9797c3d6739725cfbe4723c75f151acd05e
Reviewed-on: https://go-review.googlesource.com/36837
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
SSA's writebarrier pass requires WB store ops are always at the
end of a block. If we move write barrier insertion into SSA and
emits normal Store ops when building SSA, this requirement becomes
impractical -- it will create too many blocks for all the Store
ops.
Redo SSA's writebarrier pass, explicitly order values in store
order, so it no longer needs this requirement.
Updates #17583.
Fixes#19067.
Change-Id: I66e817e526affb7e13517d4245905300a90b7170
Reviewed-on: https://go-review.googlesource.com/36834
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Nil check removal in the same block is disabled due to issue 18725:
because the values are not ordered, a nilcheck may influence a
value that is logically before it. This CL re-enables same-block
nilcheck removal by ordering values in store order first.
Updates #18725.
Change-Id: I287a38525230c14c5412cbcdbc422547dabd54f6
Reviewed-on: https://go-review.googlesource.com/35496
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Currently the conversion from constant divides to multiplies is mostly
done during the walk pass. This is suboptimal because SSA can
determine that the value being divided by is constant more often
(e.g. after inlining).
Change-Id: If1a9b993edd71be37396b9167f77da271966f85f
Reviewed-on: https://go-review.googlesource.com/37015
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Currently, whether we need a write barrier is simply a property of the
pointer slot being written to.
The only optimization we currently apply using the value being written
is that pointers to stack variables can omit write barriers because
they're only written to stack slots... but we already omit write
barriers for all writes to the stack anyway.
Passes toolstash -cmp.
Change-Id: I7f16b71ff473899ed96706232d371d5b2b7ae789
Reviewed-on: https://go-review.googlesource.com/37109
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Until now, the parser set the position for each Node to the position of
the first token belonging to that node. For compatibility with the now
defunct gc parser, in many places that position information was modified
when the gcCompat flag was set (which it was, by default). Furthermore,
in some places, position information was not set at all.
This change removes the gcCompat flag and all associated code, and sets
position information for all nodes in a more principled way, as proposed
by mdempsky (see #16943 for details). Specifically, the position of a
node may not be at the very beginning of the respective production. For
instance for an Operation `a + b`, the position associated with the node
is the position of the `+`. Thus, for `a + b + c` we now get different
positions for the two additions.
This change does not pass toolstash -cmp because position information
recorded in export data and pcline tables is different. There are no
other functional changes.
Added test suite testing the position of all nodes.
Fixes#16943.
Change-Id: I3fc02bf096bc3b3d7d2fa655dfd4714a1a0eb90c
Reviewed-on: https://go-review.googlesource.com/37017
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
... and same for stores. This does for binary.BigEndian.Uint16() what
was already done for Uint32 and Uint64 with BSWAP in 10f75748 (CL 32222).
Here is how generated code changes e.g. for the following function
(omitting saying the same prologue/epilogue):
func get16(b [2]byte) uint16 {
return binary.BigEndian.Uint16(b[:])
}
"".get16 t=1 size=21 args=0x10 locals=0x0
// before
0x0000 00000 (x.go:15) MOVBLZX "".b+9(FP), AX
0x0005 00005 (x.go:15) MOVBLZX "".b+8(FP), CX
0x000a 00010 (x.go:15) SHLL $8, CX
0x000d 00013 (x.go:15) ORL CX, AX
// after
0x0000 00000 (x.go:15) MOVWLZX "".b+8(FP), AX
0x0005 00005 (x.go:15) ROLW $8, AX
encoding/binary is speedup overall a bit:
name old time/op new time/op delta
ReadSlice1000Int32s-4 4.83µs ± 0% 4.83µs ± 0% ~ (p=0.206 n=4+5)
ReadStruct-4 1.29µs ± 2% 1.28µs ± 1% -1.27% (p=0.032 n=4+5)
ReadInts-4 384ns ± 1% 385ns ± 1% ~ (p=0.968 n=4+5)
WriteInts-4 534ns ± 3% 526ns ± 0% -1.54% (p=0.048 n=4+5)
WriteSlice1000Int32s-4 5.02µs ± 0% 5.11µs ± 3% ~ (p=0.175 n=4+5)
PutUint16-4 0.59ns ± 0% 0.49ns ± 2% -16.95% (p=0.016 n=4+5)
PutUint32-4 0.52ns ± 0% 0.52ns ± 0% ~ (all equal)
PutUint64-4 0.53ns ± 0% 0.53ns ± 0% ~ (all equal)
PutUvarint32-4 19.9ns ± 0% 19.9ns ± 1% ~ (p=0.556 n=4+5)
PutUvarint64-4 54.5ns ± 1% 54.2ns ± 0% ~ (p=0.333 n=4+5)
name old speed new speed delta
ReadSlice1000Int32s-4 829MB/s ± 0% 828MB/s ± 0% ~ (p=0.190 n=4+5)
ReadStruct-4 58.0MB/s ± 2% 58.7MB/s ± 1% +1.30% (p=0.032 n=4+5)
ReadInts-4 78.0MB/s ± 1% 77.8MB/s ± 1% ~ (p=0.968 n=4+5)
WriteInts-4 56.1MB/s ± 3% 57.0MB/s ± 0% ~ (p=0.063 n=4+5)
WriteSlice1000Int32s-4 797MB/s ± 0% 783MB/s ± 3% ~ (p=0.190 n=4+5)
PutUint16-4 3.37GB/s ± 0% 4.07GB/s ± 2% +20.83% (p=0.016 n=4+5)
PutUint32-4 7.73GB/s ± 0% 7.72GB/s ± 0% ~ (p=0.556 n=4+5)
PutUint64-4 15.1GB/s ± 0% 15.1GB/s ± 0% ~ (p=0.905 n=4+5)
PutUvarint32-4 201MB/s ± 0% 201MB/s ± 0% ~ (p=0.905 n=4+5)
PutUvarint64-4 147MB/s ± 1% 147MB/s ± 0% ~ (p=0.286 n=4+5)
( "a bit" only because most of the time is spent in reflection-like things
there, not actual bytes decoding. Even for direct PutUint16 benchmark the
looping adds overhead and lowers visible benefit. For code-generated encoders /
decoders actual effect is more than 20% )
Adding Uint32 and Uint64 raw benchmarks too for completeness.
NOTE I had to adjust load-combining rule for bswap case to match first 2 bytes
loads as result of "2-bytes load+shift" -> "loadw + rorw 8" rewrite. Reason is:
for loads+shift, even e.g. into uint16 var
var b []byte
var v uin16
v = uint16(b[1]) | uint16(b[0])<<8
the compiler eventually generates L(ong) shift - SHLLconst [8], probably
because it is more straightforward / other reasons to work on the whole
register. This way 2 bytes rewriting rule is using SHLLconst (not SHLWconst) in
its pattern, and then it always gets matched first, even if 2-byte rule comes
syntactically after 4-byte rule in AMD64.rules because 4-bytes rule seemingly
needs more applyRewrite() cycles to trigger. If 2-bytes rule gets matched for
inner half of
var b []byte
var v uin32
v = uint32(b[3]) | uint32(b[2])<<8 | uint32(b[1])<<16 | uint32(b[0])<<24
and we keep 4-byte load rule unchanged, the result will be MOVW + RORW $8 and
then series of byte loads and shifts - not one MOVL + BSWAPL.
There is no such problem for stores: there compiler, since it probably knows
store destination is 2 bytes wide, uses SHRWconst 8 (not SHRLconst 8) and thus
2-byte store rule is not a subset of rule for 4-byte stores.
Fixes#17151 (int16 was last missing piece there)
Change-Id: Idc03ba965bfce2b94fef456b02ff6742194748f6
Reviewed-on: https://go-review.googlesource.com/34636
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CL 35261 introduces special handling of zero-valued STRUCTLIT for
efficient struct zeroing. But it didn't cover all use cases, for
example, CONVNOP STRUCTLIT is not handled.
On the other hand, CL 34566 handles zeroing earlier, so we don't
need the change in CL 35261 for efficient zeroing. Other uses of
zero-valued struct literals are very rare. So undo the change in
walk.go in CL 35261.
Add a test for efficient zeroing.
Fixes#19084.
Change-Id: I0807f7423fb44d47bf325b3c1ce9611a14953853
Reviewed-on: https://go-review.googlesource.com/36955
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Use distinction between explicit and automatically inserted semicolons
to provide a better error message if the condition in an 'if' statement
is missing.
For #18747.
Change-Id: Iac167ae4e5ad53d2dc73f746b4dee9912434bb59
Reviewed-on: https://go-review.googlesource.com/36930
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
It is not always obvious from the first glance when looking at
TestAssembly failure in which context the code was generated. For
example x86 and x86-64 are similar, and those of us who do not work with
assembly every day can even take s390x version as something similar to x86.
So when something fails lets print the whole test context - this
includes os and arch which were previously missing. An example failure:
before:
--- FAIL: TestAssembly (40.48s)
asm_test.go:46: expected: MOVWZ \(.*\),
go:
import "encoding/binary"
func f(b []byte) uint32 {
return binary.LittleEndian.Uint32(b)
}
asm:"".f t=1 size=160 args=0x20 locals=0x0
...
after:
--- FAIL: TestAssembly (40.43s)
asm_test.go:46: linux/s390x: expected: MOVWZ \(.*\),
go:
import "encoding/binary"
func f(b []byte) uint32 {
return binary.LittleEndian.Uint32(b)
}
asm:"".f t=1 size=160 args=0x20 locals=0x0
Motivated-by: #18946#issuecomment-279491071
Change-Id: I61089ceec05da7a165718a7d69dec4227dd0e993
Reviewed-on: https://go-review.googlesource.com/36881
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
MOVD{reg,nop} operations (added in CL 36256) inserted to preserve
type information were blocking the load-combining rules. Fix this
by merging type changes into loads wherever possible.
Fixes#19059.
Change-Id: I8a1df06eb0f231b40ae43107d4a3bd0b9c441b59
Reviewed-on: https://go-review.googlesource.com/36843
Run-TryBot: Michael Munday <munday@ca.ibm.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CL 33632 reorders args of commutative ops in order to make
CSE for commutative ops more robust. Unfortunately, that
broke the load-combining rules which depend on a certain ordering
of OR ops' arguments.
Introduce some additional rules that order OR ops' arguments
consistently so that the load-combining rules fire.
Note: there's also something else wrong with the s390x rules.
I've filed #19059 for that.
Fixes#18946
Change-Id: I0a5447196bd88a55ccee683c69a57b943a9972e1
Reviewed-on: https://go-review.googlesource.com/36911
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
When doing i.(T) for non-empty-interface i and concrete type T,
there's no need to read the type out of the itab. Just compare the
itab to the itab we expect for that interface/type pair.
Also optimize type switches by putting the type hash of the
concrete type in the itab. That way we don't need to load the
type pointer out of the itab.
Update #18492
Change-Id: I49e280a21e5687e771db5b8a56b685291ac168ce
Reviewed-on: https://go-review.googlesource.com/34810
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
Added missing nil-check. We will get rid of the gcCompat corrections
shortly but it's still worthwhile having the new test case added.
Fixes#19056.
Change-Id: I35bd938a4d789058da15724e34c05e5e631ecad0
Reviewed-on: https://go-review.googlesource.com/36908
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Add temporaries to reorder the assignment for OAS2XXX nodes.
This makes orderstmt(), rewrite
a, b, c = ...
as
tmp1, tmp2, tmp3 = ...
a, b, c = tmp1, tmp2, tmp3
and
a, ok = ...
as
t1, t2 = ...
a = t1
ok = t2
Fixes#13433.
Change-Id: Id0f5956e3a254d0a6f4b89b5f7b0e055b1f0e21f
Reviewed-on: https://go-review.googlesource.com/34713
Run-TryBot: Dhananjay Nakrani <dhananjayn@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Instead we can just call needwritebarrier when constructing the SSA
representation.
Change-Id: I6fefaad49daada9cdb3050f112889e49dca0047b
Reviewed-on: https://go-review.googlesource.com/34566
Reviewed-by: Cherry Zhang <cherryyz@google.com>
CL 35554 taught order.go to use static variables
for constants that needed to be addressable for runtime routines.
However, there is one class of runtime routines that
do not actually need an addressable value: fast map access routines.
This CL teaches order.go to avoid using static variables
for addressability in those cases.
Instead, it avoids introducing a temp at all,
which the backend would just have to optimize away.
Fixes#19015.
Change-Id: I5ef780c604fac3fb48dabb23a344435e283cb832
Reviewed-on: https://go-review.googlesource.com/36693
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The gcCompat mode was introduced to match the new parser's node position
setup exactly with the positions used by the original parser. Some of the
gcCompat adjustments were required to satisfy syntax error test cases,
and the rest were required to make toolstash cmp pass.
This change removes the former gcCompat adjustments and instead adjusts
the respective test cases as necessary. In some cases this makes the error
lines consistent with the ones reported by gccgo.
Where it has changed, the position associated with a given syntactic construct
is the position (line/col number) of the left-most token belonging to the
construct.
Change-Id: I5b60c00c5999a895c4d6d6e9b383c6405ccf725c
Reviewed-on: https://go-review.googlesource.com/36695
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
go:systemstack works by tweaking the stack check prologue to check
against a different bound, while go:nosplit removes the stack check
prologue entirely. Hence, they can't be used together. Make the build
fail if they are.
Change-Id: I2d180c4b1d31ff49ec193291ecdd42921d253359
Reviewed-on: https://go-review.googlesource.com/36710
Run-TryBot: Austin Clements <austin@google.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Currently there are cases where an XOR with -1 followed by an AND
is generanted when it could be done with just an ANDN instruction.
Changes to PPC64.rules and required files allows this change
in generated code. Examples of this occur in sha3 among others.
Fixes: #18918
Change-Id: I647cb9b4a4aaeebb27db85f8bf75487d78f720c9
Reviewed-on: https://go-review.googlesource.com/36218
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
Starting the error message with "expecting" rather than "missing"
causes the syntax error mechanism to add additional helpful info
(it recognizes "expecting" but not "missing").
Fixes#17328.
Change-Id: I8482ca5e5a6a6b22e0ed0d831b7328e264156334
Reviewed-on: https://go-review.googlesource.com/36637
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Towards better syntax error messages: With this change, the parser knows whether
a semicolon was an actual ';' in the source, or whether it was an automatically
inserted semicolon as result of a '\n' or EOF. Using this information in error
messages makes them more understandable.
For #17328.
Change-Id: I8cd9accee8681b62569d0ecef922d38682b401eb
Reviewed-on: https://go-review.googlesource.com/36636
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Some rules insert MOVDreg ops to ensure that type changes are kept.
If there is no type change (or the input is constant) then the MOVDreg
can be omitted, allowing further optimization.
Reduces the size of the .text section in the asm tool by ~33KB.
Change-Id: I386883bb35b843c7b99a269cd6840dca77cf4371
Reviewed-on: https://go-review.googlesource.com/36547
Run-TryBot: Michael Munday <munday@ca.ibm.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
In cmd/compile, we can directly construct obj.Auto to represent local
variables and attach them to the function's obj.LSym.
In preparation for being able to emit more precise DWARF info based on
other compiler available information (e.g., lexical scoping).
Change-Id: I9c4225ec59306bec42552838493022e0e9d70228
Reviewed-on: https://go-review.googlesource.com/36420
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This code is dead as a result of
* removing the Follow pass
* moving rotation detection from walk to ssa
Change-Id: I14599c85bedb4e3148347b547e724187920182c4
Reviewed-on: https://go-review.googlesource.com/36484
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The compiler did not emit write barrier for assigning global with
struct literal, like global = T{} where T contains pointer.
The relevant code path is:
walkexpr OAS var_ OSTRUCTLIT
oaslit
anylit OSTRUCTLIT
walkexpr OAS var_ nil
return without adding write barrier
return true
break (without adding write barrier)
This CL makes oaslit not apply to globals. See also CL
https://go-review.googlesource.com/c/36355/ for an alternative
fix.
The downside of this is that it generates static data for zeroing
struct now. Also this only covers global. If there is any lurking
bug with implicit zeroing other than globals, this doesn't fix.
Fixes#18956.
Change-Id: Ibcd27e4fae3aa38390ffa94a32a9dd7a802e4b37
Reviewed-on: https://go-review.googlesource.com/36410
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is a follow-up on https://go-review.googlesource.com/36470
and leads to a more stable fix. The above CL relied on filtering
of multiple errors on the same line to avoid more than one error
for an `if` statement of the form `if a := 10 {}`. This CL avoids
the secondary error ("missing condition in if statement") in the
first place.
For #18915.
Change-Id: I8517f485cc2305965276c17d8f8797d61ef9e999
Reviewed-on: https://go-review.googlesource.com/36479
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
For code such as
if a := 10 { ...
the 1.7 compiler reported
a := 10 used as value
while the 1.8 compiler reported
invalid condition, tag, or type switch guard
Changed the error message to match the 1.7 compiler.
Fixes#18915.
Change-Id: I01308862e461922e717f9f8295a9db53d5a914eb
Reviewed-on: https://go-review.googlesource.com/36470
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Removes all external uses of Linksym and Pkglookup, which are the only
two exported functions that return Syms.
Also add Duffcopy and Duffzero since they're used often enough across
SSA backends.
Passes toolstash -cmp.
Change-Id: I8d3fd048ad5cd676fc46378f09a917569ffc9b2c
Reviewed-on: https://go-review.googlesource.com/36418
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Gc's Sym type represents a package-qualified identifier, which is a
frontend concept and doesn't belong in SSA. Bonus: we can replace some
interface{} types with *obj.LSym.
Passes toolstash -cmp.
Change-Id: I456eb9957207d80f99f6eb9b8eab4a1f3263e9ed
Reviewed-on: https://go-review.googlesource.com/36415
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
We shouldn't use CONVNOP for conversions between two different
nonempty interface types, because we want to update the itab
in those situations.
Fixes#18595
After this CL, we are guaranteed that itabs are unique, that is
there is only one itab per compile-time-type/concrete type pair.
See also the tests in CL 35115 and 35116 which make sure this
invariant holds even for shared libraries and plugins.
Unique itabs are required for CL 34810 (faster type switch code).
R=go1.9
Change-Id: Id27d2e01ded706680965e4cb69d7c7a24ac2161b
Reviewed-on: https://go-review.googlesource.com/35119
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Rather than collecting static data nodes to be written out later, just
write them out immediately.
Change-Id: I51708b690e94bc3e288b4d6ba3307bf738a80f64
Reviewed-on: https://go-review.googlesource.com/36352
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This CL fixes two issues:
1. Load ops were initially always lowered to unsigned loads, even
for signed types. This was fine by itself however LoadReg ops
(used to re-load spilled values) were lowered to signed loads
for signed types. This meant that spills could invalidate
optimizations that assumed the original unsigned load.
2. Types were not always being maintained correctly through rules
designed to eliminate unnecessary zero and sign extensions.
Fixes#18906.
Change-Id: I95785dcadba03f7e3e94524677e7d8d3d3b9b737
Reviewed-on: https://go-review.googlesource.com/36256
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
If there is a defer, and that defer recovers, then the caller
can see all of the output parameters. That means that we must
mark all the output parameters live at any point which might panic.
If there is no defer then this is not necessary. This is implemented.
We could also detect whether there is a recover in any of the defers.
If not, we would need to mark only output params that the defer
actually references (and the closure mechanism already does that).
This is not implemented.
Fixes#18860.
Change-Id: If984fe6686eddce9408bf25e725dd17fc16b8578
Reviewed-on: https://go-review.googlesource.com/36030
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
These rules trigger 116 times while running make.bash.
And at least for the sample code at
https://github.com/golang/go/issues/18906#issuecomment-277174241
they are providing optimizations not already present
in amd64.
Updates #18906
Change-Id: I410a480f566f5ab176fc573fb5ac74f9cffec225
Reviewed-on: https://go-review.googlesource.com/36217
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Use (-x)>>63 instead of ((x-1)>>63)^-1 to get a mask that
is 0 when x is 0 and all ones when x is positive.
Saves one instruction when slicing.
Change-Id: Ib46d53d3aac6530ac481fa2f265a6eadf3df0567
Reviewed-on: https://go-review.googlesource.com/35641
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Instead of always appending to c.Values,
choose whichever slice is larger;
b.Values will be set to nil anyway.
Appending once instead of in a loop also
limits slice growth to once per function call
and is more efficient.
Reduces max rss for the program in #18602 by 6.5%,
and eliminates fuseBlockPlain from the alloc_space
pprof output. fuseBlockPlain previously accounted
for 16.74% of allocated memory.
Updates #18602.
Change-Id: I417b03722d011a59a679157da43dc91f4425210e
Reviewed-on: https://go-review.googlesource.com/35114
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Remove rotate generation from walk. Remove OLROT and ssa.Lrot* opcodes.
Generate rotates during SSA lowering for architectures that have them.
This CL will allow rotates to be generated in more situations,
like when the shift values are determined to be constant
only after some analysis.
Fixes#18254
Change-Id: I8d6d684ff5ce2511aceaddfda98b908007851079
Reviewed-on: https://go-review.googlesource.com/34232
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Intrinsics are ok to inline as they don't rewrite to actual calls.
Change-Id: Ieb19c834c61579823c62c6d1a1b425d6c4d4de23
Reviewed-on: https://go-review.googlesource.com/34272
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
When we discover a relation x <= len(s), also discover the relation
x <= cap(s). That way, in situations like:
a := s[x:] // tests 0 <= x <= len(s)
b := s[:x] // tests 0 <= x <= cap(s)
the second check can be eliminated.
Fixes#16813
Change-Id: Ifc037920b6955e43bac1a1eaf6bac63a89cfbd44
Reviewed-on: https://go-review.googlesource.com/33633
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alexandru Moșoi <alexandru@mosoi.ro>
Reviewed-by: David Chase <drchase@google.com>
CSE opportunities were being missed for commutative ops. We used to
order the args of commutative ops (by arg ID) once at the start of CSE.
But that may not be enough.
i1 = (Load ptr mem)
i2 = (Load ptr mem)
x1 = (Add i1 j)
x2 = (Add i2 j)
Equivalent commutative ops x1 and x2 may not get their args ordered in
the same way because because at the start of CSE, we don't know that
the i values will be CSEd. If x1 and x2 get opposite orders we won't
CSE them.
Instead, (re)order the args of commutative operations by their
equivalence class IDs each time we partition an equivalence class.
Change-Id: Ic609fa83b85299782a5e85bf93dc6023fccf4b0c
Reviewed-on: https://go-review.googlesource.com/33632
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Todd Neal <todd@tneal.org>
Fixes#10561.
Provides a better diagnostic message for failed type switch
satisfaction in the case that a value receiver is being used
in place of the pointer receiver that implements and satisfies
the interface.
Change-Id: If8c13ba13f2a8d81bf44bac7c3a66c12921ba921
Reviewed-on: https://go-review.googlesource.com/35235
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixes#8481.
Inform the user that init functions cannot be directly invoked
in user code, as mandated by the spec at:
http://golang.org/ref/spec#Program_initialization_and_execution.
Change-Id: Ib12c0c08718ffd48b76b6f9b13c76bb6612d2e7b
Reviewed-on: https://go-review.googlesource.com/34790
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixes#15055.
Updates exprfmt printing using fmt verb "%v" to check that n.Left
is non-nil before attempting to print it, otherwise we'll print
the nodes in the list using verb "%.v".
Credit to @mdempsky for this approach and for finding
the root cause of the issue.
Change-Id: I20a6464e916dc70d5565e145164bb9553e5d3865
Reviewed-on: https://go-review.googlesource.com/25361
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The binary export format embeds type definitions inline as necessary,
so there's no need to add them to exportlist. Also, constants are
embedded directly by value, so they can be omitted too.
Change-Id: Id1879eb97c298a5a52f615cf9883c346c7f7bd69
Reviewed-on: https://go-review.googlesource.com/36170
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
When switching to the new parser, I changed cmd/compile to handle iota
per an intuitive interpretation of how nested constant declarations
should work (which also matches go/types).
Note: if we end up deciding that the current spec wording is
intentional (i.e., confirming gccgo's current behavior), the test will
need to be updated to expect 4 instead of 1.
Updates #15550.
Change-Id: I441f5f13209f172b73ef75031f2a9daa5e985277
Reviewed-on: https://go-review.googlesource.com/36122
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The comment for maxPtrmaskBytes implied that the value was still 16,
but that changed in CL 10815.
Change-Id: I86e304bc7d9d1a0a6b22b600fefcc1325e4372d9
Reviewed-on: https://go-review.googlesource.com/36120
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Whoever called toint() is expecting the {Mpint, Mpflt, Mpcplx} arg to
be converted to an integer expression, so it never makes sense to
report an error as "constant X truncated to real".
Fixes#11580
Change-Id: Iadcb105f0802358a7f77188c2b1e63fe80c5580c
Reviewed-on: https://go-review.googlesource.com/34638
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Many non-inlineable functions were not being
reported in '-m -m' mode.
Updates #17858.
Change-Id: I7d96361b39dd317f5550e57334a8a6dd1a836598
Reviewed-on: https://go-review.googlesource.com/32971
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
generic.rules wasn't updated when rewritegeneric.go was. This commit
updates it so that the rewritegeneric.go file can be regenerated.
Fixes#18885.
Change-Id: Ie7dab653ca0a9ea1c255fd12e311a0d9e66afdd2
Reviewed-on: https://go-review.googlesource.com/36032
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
By grouping all the logic into constDecl, we're able to get rid of the
lastconst and lasttype globals, and simplify the logic slightly. Still
clunky, but much easier to reason about.
Change-Id: I446696c31084b3bfc1fd5d3651655a81ddd159ab
Reviewed-on: https://go-review.googlesource.com/36023
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Algorithmic improvements here are hard.
Lifting a lookup out of the loop helps a little, though.
To compile the code in #17926:
name old s/op new s/op delta
Real 146 ± 3% 140 ± 4% -3.87% (p=0.002 n=10+10)
User 143 ± 3% 139 ± 4% -3.08% (p=0.005 n=10+10)
Sys 8.28 ±35% 8.08 ±28% ~ (p=0.684 n=10+10)
Updates #17926.
Change-Id: Ic255ac8b7b409c1a53791058818b7e2cf574abe3
Reviewed-on: https://go-review.googlesource.com/33305
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
For #18130.
f8b4123613 [dev.typealias] spec: use term 'embedded field' rather than 'anonymous field'
9ecc3ee252 [dev.typealias] cmd/compile: avoid false positive cycles from type aliases
49b7af8a30 [dev.typealias] reflect: add test for type aliases
9bbb07ddec [dev.typealias] cmd/compile, reflect: fix struct field names for embedded byte, rune
43c7094386 [dev.typealias] reflect: fix StructOf use of StructField to match StructField docs
9657e0b077 [dev.typealias] cmd/doc: update for type alias
de2e5459ae [dev.typealias] cmd/compile: declare methods after resolving receiver type
9259f3073a [dev.typealias] test: match gccgo error messages on alias2.go
5d92916770 [dev.typealias] cmd/compile: change Func.Shortname to *Sym
a7c884efc1 [dev.typealias] go/internal/gccgoimporter: support for type aliases
5802cfd900 [dev.typealias] cmd/compile: export/import test cases for type aliases
d7cabd40dd [dev.typealias] go/types: clarified doc string
cc2dcce3d7 [dev.typealias] cmd/compile: a few better comments related to alias types
5c160b28ba [dev.typealias] cmd/compile: improved error message for cyles involving type aliases
b2386dffa1 [dev.typealias] cmd/compile: type-check type alias declarations
ac8421f9a5 [dev.typealias] cmd/compile: various minor cleanups
f011e0c6c3 [dev.typealias] cmd/compile, go/types, go/importer: various alias related fixes
49de5f0351 [dev.typealias] cmd/compile, go/importer: define export format and implement importing of type aliases
5ceec42dc0 [dev.typealias] go/types: export TypeName.IsAlias so clients can use it
aa1f0681bc [dev.typealias] go/types: improved Object printing
c80748e389 [dev.typealias] go/types: remove some more vestiges of prior alias implementation
80d8b69e95 [dev.typealias] go/types: implement type aliases
a917097b5e [dev.typealias] go/build: add go1.9 build tag
3e11940437 [dev.typealias] cmd/compile: recognize type aliases but complain for now (not yet supported)
e0a05c274a [dev.typealias] cmd/gofmt: added test cases for alias type declarations
2e5116bd99 [dev.typealias] go/ast, go/parser, go/printer, go/types: initial type alias support
Change-Id: Ia65f2e011fd7195f18e1dce67d4d49b80a261203
Will also fix type aliases.
Fixes#17766.
For #18130.
Change-Id: I9e1584d47128782152e06abd0a30ef423d5c30d2
Reviewed-on: https://go-review.googlesource.com/35732
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
A Func's Shortname is just an identifier. No need for an entire ONAME
Node.
Change-Id: Ie4d397e8d694c907fdf924ce57bd96bdb4aaabca
Reviewed-on: https://go-review.googlesource.com/35574
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The constant propagation rules selected the wrong operand to
propagate. So MOVDNE (move if not equal) propagated operands as if
it were a MOVDEQ (move if equal).
Fixes#18735.
Change-Id: I87ac469172f9df7d5aabaf7106e2936ce54ae202
Reviewed-on: https://go-review.googlesource.com/35498
Run-TryBot: Michael Munday <munday@ca.ibm.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When nilcheck runs, the values in a block are not in any particular
order. So any facts derived from examining the blocks shouldn't be
used until we reach the next block.
This is suboptimal as it won't eliminate nil checks within a block.
But it's probably a better fix for now as it is a much smaller change
than other strategies for fixing this bug.
nilptr3.go changes are mostly because for this pattern:
_ = *p
_ = *p
either nil check is fine to keep, and this CL changes which one
the compiler tends to keep.
There are a few regressions from code like this:
_ = *p
f()
_ = *p
For this pattern, after this CL we issue 2 nil checks instead of one.
(For the curious, this happens because intra-block nil check
elimination now falls to CSE, not nilcheck proper. The former
pattern has two nil checks with the same store argument. The latter
pattern has two nil checks with different store arguments.)
Fixes#18725
Change-Id: I3721b494c8bc9ba1142dc5c4361ea55c66920ac8
Reviewed-on: https://go-review.googlesource.com/35485
Reviewed-by: Cherry Zhang <cherryyz@google.com>
pprof.WriteHeapProfile is shorthand for
pprof.Lookup("heap").WriteTo(f, 0).
The second parameter is debug.
If it is non-zero, pprof writes legacy-format
pprof output, which compilebench can parse.
Fixes#18641
Change-Id: Ica69adeb9809e9b5933aed943dcf4a07910e43fc
Reviewed-on: https://go-review.googlesource.com/35484
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Plus a few minor changes.
For #18130.
Change-Id: Ica6503fe9c888cc05c15b46178423f620c087491
Reviewed-on: https://go-review.googlesource.com/35233
Reviewed-by: Alan Donovan <adonovan@google.com>
It looks like it should be there, although I couldn't find a test
case that fails without it. ZeroWB is probably never generated now:
zeroing an initialized heap object is done by making an autotmp on
stack, zeroing it, and copying (typedmemmove) to heap.
Passes "toolstash -cmp" on std.
Change-Id: I702a59759e33fb8cc2a34a3b3029e7540aca080a
Reviewed-on: https://go-review.googlesource.com/35250
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Conversion to Nodes still happens sequentially at the moment.
Change-Id: I3407ba0711b8b92e22ece0a06fefaff863c3ccc9
Reviewed-on: https://go-review.googlesource.com/35126
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Previously, mkpackage jumbled together three unrelated tasks: handling
package declarations, clearing imports from processing previous source
files, and assigning a default value to outfile.
Change-Id: I1e124335768aeabfd1a6d9cc2499fbb980d951cf
Reviewed-on: https://go-review.googlesource.com/35124
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Known issue: #18640 (requires a bit more work, I believe).
For #18130.
Change-Id: I53dc26012070e0c79f63b7c76266732190a83d47
Reviewed-on: https://go-review.googlesource.com/35129
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Known issues:
- needs many more tests
- duplicate method declarations via type alias names are not detected
- type alias cycle error messages need to be improved
- need to review setup of byte/rune type aliases
For #18130.
Change-Id: Icc2fefad6214e5e56539a9dcb3fe537bf58029f8
Reviewed-on: https://go-review.googlesource.com/35121
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This reduces compilation time for the program
in #18602 from 7 hours to 30 min.
Updates #14781
Updates #18602
Change-Id: I3c4af878a08920e6373d3b3b0c4453ee002e32eb
Reviewed-on: https://go-review.googlesource.com/35113
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Also: Don't allow type pragmas with type alias declarations.
For #18130.
Change-Id: Ie54ea5fefcd677ad87ced03466bbfd783771e974
Reviewed-on: https://go-review.googlesource.com/35102
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
cmd/compile:
- remove crud from prior alias implementation
- better comments in places
go/types:
- fix TypeName.IsAlias predicate
- more tests
go/importer (go/internal/gcimporter15):
- handle "@" format for anonymous fields using aliases
(currently tested indirectly via x/tools/gcimporter15 tests)
For #18130.
Change-Id: I23a6d4e3a4c2a5c1ae589513da73fde7cad5f386
Reviewed-on: https://go-review.googlesource.com/35101
Reviewed-by: Alan Donovan <adonovan@google.com>
This defines the (tentative) export/import format for type aliases.
The compiler doesn't support type aliases yet, so while the code is present
it is guarded with a flag.
The export format for embedded (anonymous) fields now has three modes (mode 3 is new):
1) The original type name and the anonymous field name are the same, and the name is exported:
we don't need the field name and write "" instead
2) The original type name and the anonymous field name are the same, and the name is not exported:
we don't need the field name and write "?" instead, indicating that there is package info
3) The original type name and the anonymous field name are different:
we do need the field name and write "@" followed by the field name (and possible package info)
For #18130.
Change-Id: I790dad826757233fa71396a210f966c6256b75d3
Reviewed-on: https://go-review.googlesource.com/35100
Reviewed-by: Alan Donovan <adonovan@google.com>
XPos is a compact (8 instead of 16 bytes on a 64bit machine) source
position representation. There is a 1:1 correspondence between each
XPos and each regular Pos, translated via a global table.
In some sense this brings back the LineHist, though positions can
track line and column information; there is a O(1) translation
between the representations (no binary search), and the translation
is factored out.
The size increase with the prior change is brought down again and
the compiler speed is in line with the master repo (measured on
the same "quiet" machine as for prior change):
name old time/op new time/op delta
Template 256ms ± 1% 262ms ± 2% ~ (p=0.063 n=5+4)
Unicode 132ms ± 1% 135ms ± 2% ~ (p=0.063 n=5+4)
GoTypes 891ms ± 1% 871ms ± 1% -2.28% (p=0.016 n=5+4)
Compiler 3.84s ± 2% 3.89s ± 2% ~ (p=0.413 n=5+4)
MakeBash 47.1s ± 1% 46.2s ± 2% ~ (p=0.095 n=5+5)
name old user-ns/op new user-ns/op delta
Template 309M ± 1% 314M ± 2% ~ (p=0.111 n=5+4)
Unicode 165M ± 1% 172M ± 9% ~ (p=0.151 n=5+5)
GoTypes 1.14G ± 2% 1.12G ± 1% ~ (p=0.063 n=5+4)
Compiler 5.00G ± 1% 4.96G ± 1% ~ (p=0.286 n=5+4)
Change-Id: Icc570cc60ab014d8d9af6976f1f961ab8828cc47
Reviewed-on: https://go-review.googlesource.com/34506
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This replaces the src.Pos LineHist-based position tracking with
the syntax.Pos implementation and updates all uses.
The LineHist table is not used anymore - the respective code is still
there but should be removed eventually. CL forthcoming.
Passes toolstash -cmp when comparing to the master repo (with the
exception of a couple of swapped assembly instructions, likely due
to different instruction scheduling because the line-based sorting
has changed; though this is won't affect correctness).
The sizes of various important compiler data structures have increased
significantly (see the various sizes_test.go files); this is probably
the reason for an increase of compilation times (to be addressed). Here
are the results of compilebench -count 5, run on a "quiet" machine (no
apps running besides a terminal):
name old time/op new time/op delta
Template 256ms ± 1% 280ms ±15% +9.54% (p=0.008 n=5+5)
Unicode 132ms ± 1% 132ms ± 1% ~ (p=0.690 n=5+5)
GoTypes 891ms ± 1% 917ms ± 2% +2.88% (p=0.008 n=5+5)
Compiler 3.84s ± 2% 3.99s ± 2% +3.95% (p=0.016 n=5+5)
MakeBash 47.1s ± 1% 47.2s ± 2% ~ (p=0.841 n=5+5)
name old user-ns/op new user-ns/op delta
Template 309M ± 1% 326M ± 2% +5.18% (p=0.008 n=5+5)
Unicode 165M ± 1% 168M ± 4% ~ (p=0.421 n=5+5)
GoTypes 1.14G ± 2% 1.18G ± 1% +3.47% (p=0.008 n=5+5)
Compiler 5.00G ± 1% 5.16G ± 1% +3.12% (p=0.008 n=5+5)
Change-Id: I241c4246cdff627d7ecb95cac23060b38f9775ec
Reviewed-on: https://go-review.googlesource.com/34273
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Loop breaking with a counter. Benchmarked (see comments),
eyeball checked for sanity on popular loops. This code
ought to handle loops in general, and properly inserts phi
functions in cases where the earlier version might not have.
Includes test, plus modifications to test/run.go to deal with
timeout and killing looping test. Tests broken by the addition
of extra code (branch frequency and live vars) for added
checks turn the check insertion off.
If GOEXPERIMENT=preemptibleloops, the compiler inserts reschedule
checks on every backedge of every reducible loop. Alternately,
specifying GO_GCFLAGS=-d=ssa/insert_resched_checks/on will
enable it for a single compilation, but because the core Go
libraries contain some loops that may run long, this is less
likely to have the desired effect.
This is intended as a tool to help in the study and diagnosis
of GC and other latency problems, now that goal STW GC latency
is on the order of 100 microseconds or less.
Updates #17831.
Updates #10958.
Change-Id: I6206c163a5b0248e3f21eb4fc65f73a179e1f639
Reviewed-on: https://go-review.googlesource.com/33910
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Change-Id: I429637ca91f7db4144f17621de851a548dc1ce76
Reviewed-on: https://go-review.googlesource.com/34923
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CALLPART of STRUCTLIT did not check for incomplete initialization
of struct; modify PTRLIT treatment to force zeroing.
Test for structlit, believe this might have also failed for
arraylit.
Fixes#18410.
Change-Id: I511abf8ef850e300996d40568944665714efe1fc
Reviewed-on: https://go-review.googlesource.com/34622
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Currently, the check for legal pointers in stack copying uses
_PageSize (8K) as the minimum legal pointer. By default, Linux won't
let you map under 64K, but
1) it's less clear what other OSes allow or will allow in the future;
2) while mapping the first page is a terrible idea, mapping anywhere
above that is arguably more justifiable;
3) the compiler only assumes the first physical page (4K) is never
mapped.
Make the runtime consistent with the compiler and more robust by
changing the bad pointer check to use 4K as the minimum legal pointer.
This came out of discussions on CLs 34663 and 34719.
Change-Id: Idf721a788bd9699fb348f47bdd083cf8fa8bd3e5
Reviewed-on: https://go-review.googlesource.com/34890
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Fixes#18392.
Avoid nil dereferencing n.Right when dealing with non-existent
self referenced interface methods e.g.
type A interface{
Fn(A.Fn)
}
Instead, infer the symbol name from n.Sym itself.
Change-Id: I60d5f8988e7318693e5c8da031285d8d7347b771
Reviewed-on: https://go-review.googlesource.com/34817
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Commit 10f75748 (CL 32222) taught AMD64 backend to rewrite series of
byte loads or stores with corresponding shifts into a single long or
quad load or store + appropriate BSWAP. However it did not added test
for stores - only loads were tested.
Fix it.
NOTE Tests for indexed stores are not added because 10f75748 did not add
support for indexed stores - only indexed loads were handled then.
Change-Id: I48c867ebe7622ac8e691d43741feed1d40cca0d7
Reviewed-on: https://go-review.googlesource.com/34634
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Make sure we generate the right code for zeroing a structure.
Check in after Matthew's CL (34564).
Update #18370
Change-Id: I987087f979d99227a880b34c44d9d4de6c25ba0c
Reviewed-on: https://go-review.googlesource.com/34565
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
golang.org/issue/17594 was caused by additab being called more than once for
an itab. golang.org/cl/32131 fixed that by making the itabs local symbols,
but that in turn causes golang.org/issue/18252 because now there are now
multiple itab symbols in a process for a given (type,interface) pair and
different code paths can end up referring to different itabs which breaks
lots of reflection stuff. So this makes itabs global again and just takes
care to only call additab once for each itab.
Fixes#18252
Change-Id: I781a193e2f8dd80af145a3a971f6a25537f633ea
Reviewed-on: https://go-review.googlesource.com/34173
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This moves syntax.Pos closer to cmd/internal/src.Pos so that
we can more easily replace src.Pos with syntax.Pos going forward.
Change-Id: I9f93a65fecb4c22591edca4b9d6cda39cf0e872e
Reviewed-on: https://go-review.googlesource.com/34270
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This will only become user-visible if error messages show column information.
Per the discussion in #10324.
For #10324.
Change-Id: I5959c1655aba74bb1a22fdc261cd728ffcfa6912
Reviewed-on: https://go-review.googlesource.com/34244
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This will let us use the src.Pos struct to thread inlining
information through to obj.
Change-Id: I96a16d3531167396988df66ae70f0b729049cc82
Reviewed-on: https://go-review.googlesource.com/34195
Run-TryBot: David Lazar <lazard@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
- make the scanner unconditionally gc compatible
- consistently use "invalid" instead "illegal" in errors
Reviewed in and cherry-picked from https://go-review.googlesource.com/#/c/33896/.
Change-Id: I4c4253e7392f3311b0d838bbe503576c9469b203
Reviewed-on: https://go-review.googlesource.com/34237
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
- use syntax.Pos in syntax.Error (rather than line, col)
- use syntax.Pos in syntax.PragmaHandler (rather than just line)
- update uses
- better documentation in various places
Also:
- make Pos methods use Pos receiver (rather than *Pos)
Reviewed in and cherry-picked from https://go-review.googlesource.com/#/c/33891/.
With minor adjustments to noder.go to make merge compile.
Change-Id: I5507cea6c2be46a7677087c1aeb69382d31033eb
Reviewed-on: https://go-review.googlesource.com/34236
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed in and cherry-picked from https://go-review.googlesource.com/#/c/33873/.
- simplify error handling in source.go
(move handling of first error into parser, where it belongs)
- clean up error handling in scanner.go
- move pragma and position base handling from scanner
to parser where it belongs
- have separate error methods in parser to avoid confusion
with handlers from scanner.go and source.go
- (source.go) and (scanner.go, source.go, tokens.go)
may be stand-alone packages if so desired, which means
these files are now less entangled and easier to maintain
Change-Id: I81510fc7ef943b78eaa49092c0eab2075a05878c
Reviewed-on: https://go-review.googlesource.com/34235
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed in and cherry-picked from https://go-review.googlesource.com/#/c/33764/.
Minor adjustment in noder.go to make merge compile again.
Change-Id: Ib5029b52b59944f207b0f2438c8a5aa576eb25b8
Reviewed-on: https://go-review.googlesource.com/34233
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Using a variable instead of a composite literal makes
the code independent of implementation changes of Pos.
Per David Lazar's suggestion.
Change-Id: I336967ac12a027c51a728a58ac6207cb5119af4a
Reviewed-on: https://go-review.googlesource.com/34148
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This is a mostly mechanical rename followed by manual fixes where necessary.
Change-Id: Ie5c670b133db978f15dc03e50dc2da0c80fc8842
Reviewed-on: https://go-review.googlesource.com/34137
Reviewed-by: David Lazar <lazard@golang.org>
Various minor adjustments.
Change-Id: Iedfb97989f7bedaa3e9e8993b167e05f162434a7
Reviewed-on: https://go-review.googlesource.com/34136
Reviewed-by: David Lazar <lazard@golang.org>
Adjust cmd/compile accordingly.
This will make it easier to replace the underlying implementation.
Change-Id: I33645850bb18c839b24785b6222a9e028617addb
Reviewed-on: https://go-review.googlesource.com/34133
Reviewed-by: David Lazar <lazard@golang.org>
This is a step toward chosing a different position representation.
By introducing an explicit type, it will be easier to make the
transition step-wise while ensuring everything keeps running.
This has been reviewed via https://go-review.googlesource.com/#/c/34025/.
Change-Id: Ibceddcd62d8f346321ac3250e3940e9c436ed684
Reviewed-on: https://go-review.googlesource.com/34132
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Lazar <lazard@golang.org>
In writebarrier phase, a chain of StoreWBs is rewritten to branchy
code to invoke write barriers, and the last store in the chain is
spliced into a Phi op to join the memory of the two branches. We
must find the last store explicitly, since the values are not
scheduled and they may not come in dependency order.
Fixes#18169.
Change-Id: If547e3c562ef0669bc5622c1bb711904dc36314d
Reviewed-on: https://go-review.googlesource.com/33915
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This was a regression from 1.7. See the issue for details.
Fixes#18149.
Change-Id: Ic8f5a35d14edf9254b1275400316cff7aff32a27
Reviewed-on: https://go-review.googlesource.com/33799
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
func f() {
g()
}
We mistakenly don't add a frame pointer for f. This means f
isn't seen when walking the frame pointer linked list. That
matters for kernel-gathered profiles, and is an impediment for
issues like #16638.
To fix, allocate a stack frame even for otherwise frameless functions
like f. It is a bit tricky because we need to avoid some runtime
internals that really, really don't want one.
No test at the moment, as only kernel CPU profiles would catch it.
Tests will come with the implementation of #16638.
Fixes#18103
Change-Id: I411206cc9de4c8fdd265bee2e4fa61d161ad1847
Reviewed-on: https://go-review.googlesource.com/33754
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Now the net tests pass with -gcflags '-l=4'.
Fixes#18125.
Change-Id: I4e3a46eb0cb3a93b203e74f5bc99c5822331f535
Reviewed-on: https://go-review.googlesource.com/33722
Reviewed-by: Keith Randall <khr@golang.org>
This fixes a bug in -l=3 or higher.
To inline a variadic function, the compiler generates code that constructs
a slice of arguments for the variadic parameter. Consider the function
func Foo(xs ...string)
and the call Foo("hello", "world"). To inline the call to Foo, the
compiler used to generate
xs := [2]string{"hello", "world"}[:]
which doesn't type check:
invalid operation [2]string literal[:] (slice of unaddressable value).
Now, the compiler generates
xs := []string{"hello", "world"}
which does type check.
Fixes#18116.
Change-Id: I0ee531ef2e6cc276db6fb12602b25a46d6d5db21
Reviewed-on: https://go-review.googlesource.com/33671
Reviewed-by: Keith Randall <khr@golang.org>
The doc field is not yet used - remove it for now (we may end up
with a different solution for 1.9). This reduces memory consumption
for parsing all of std lib by about 40MB and makes parsing slightly
faster.
Change-Id: Iafb00b9c7f1be9c66fdfb29096d3da5049b2fcf5
Reviewed-on: https://go-review.googlesource.com/33661
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Introduce R_WEAKADDROFF, a "weak" variation of the R_ADDROFF relocation
that will only reference the type described if it is in some other way
reachable.
Use this for the ptrToThis field in reflect type information where it
is safe to do so (that is, types that don't need to be included for
interface satisfaction, and types that won't cause the compiler to
recursively generate an endless series of ptr-to-ptr-to-ptr-to...
types).
Also fix a small bug in reflect, where StructOf was not clearing the
ptrToThis field of new types.
Fixes#17931
Change-Id: I4d3b53cb9c916c97b3b16e367794eee142247281
Reviewed-on: https://go-review.googlesource.com/33427
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The table of rewrites in ssa/cse is not sized appropriately for
ssa IDs that are created during copying of selects into new blocks.
Fixes#17918
Change-Id: I65fe86c6aab5efa679aa473aadc4ee6ea882cd41
Reviewed-on: https://go-review.googlesource.com/33240
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It's possible for the pkgPath of a field to be different than that of
the struct type as a whole. In that case, store the field's pkgPath in
the name field. Use the field's pkgPath when setting PkgPath and when
checking for type identity.
Fixes#17952.
Change-Id: Iebaf92f0054b11427c8f6e4158c3bebcfff06f45
Reviewed-on: https://go-review.googlesource.com/33333
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Autotmp filtering was too aggressive and excluded types
necessary to make debuggers work properly. Restore the
"late filter" in dwarf.go based on names to exclude autotmps,
and remove the "early filter" in pgen.go based on how the
name was introduced. However, the updated naming scheme
with a dot prefix is retained to prevent accidental clashes
with legal Go identifier names.
Includes test (grouped with runtime gdb tests),
verified to fail without the fix.
Updates #17644.
Fixes#17830.
Change-Id: I7ec3f7230083889660236e5f6bc77ba5fe434e93
Reviewed-on: https://go-review.googlesource.com/33233
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The use of these has been removed in recent commits.
Change-Id: Iff36a3ee4dcdfe39c40e93e2601f44d3c59f7024
Reviewed-on: https://go-review.googlesource.com/33274
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
- define syntax.Error for cleaner error reporting
- abort parsing after first error if no error handler is installed
- make sure to always report the first error, if any
- document behavior of API calls
- while at it: rename ReadXXX -> ParseXXX (clearer)
- adjust cmd/compile noder.go accordingly
Fixes#17774.
Change-Id: I7893eedea454a64acd753e32f7a8bf811ddbb03c
Reviewed-on: https://go-review.googlesource.com/32950
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
These comments were originally introduced together with the changes
for alias declarations, and then reverted when we backed out alias
support.
Reintroduce them.
Change-Id: I3ef2c4f4672d6af8a900f5d73df273edf28d1a14
Reviewed-on: https://go-review.googlesource.com/32826
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This reverts commit 32db3f2756.
Reason: Decision to back out current alias implementation.
For #16339.
Change-Id: Ib05e3d96041d8347e49cae292f66bec791a1fdc8
Reviewed-on: https://go-review.googlesource.com/32825
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reason: Decision to back out current alias implementation.
Leaving import/export related code in place for now.
For #16339.
TBR=mdempsky
Change-Id: Ib0897cab2c1c3dc8a541f2efb9893271b0b0efe2
Reviewed-on: https://go-review.googlesource.com/32757
Reviewed-by: Robert Griesemer <gri@golang.org>
Use a separate symbol for reflect metadata for types with Noalg set.
Fixes#17752.
Change-Id: Icb6cade7e3004fc4108f67df61105dc4085cd7e2
Reviewed-on: https://go-review.googlesource.com/32679
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The exported symbol for a plugin can be the only reference to a
type in a program. In particular, "var F func()" will have
the type *func(), which is uncommon.
Fixes#17140
Change-Id: Ide2104edbf087565f5377374057ae54e0c00c57e
Reviewed-on: https://go-review.googlesource.com/29692
Run-TryBot: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
TestAssembly takes 20s on my machine,
which is too slow for normal operation.
Marking as -short has its dangers (#17472),
but hopefully we'll soon have a builder for that.
All the SSA tests are hermetic and not time sensitive
and can thus be run in parallel.
Reduces the cmd/compile/internal/gc test time during
all.bash on my laptop from 42s to 7s.
Updates #17751
Change-Id: Idd876421db23b9fa3475e8a9b3355a5dc92a5a29
Reviewed-on: https://go-review.googlesource.com/32585
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
when compiling f(a, b, c), we do something like:
*(SP+0) = eval(a)
*(SP+8) = eval(b)
*(SP+16) = eval(c)
call f
If one of those evaluations is later determined to unconditionally panic
(say eval(b) in this example), then the call is deadcode eliminated. But
any previous argument write (*(SP+0)=... here) is still around. Becuase
we only compute the size of the outarg area for calls which are still
around at the end of optimization, the space needed for *(SP+0)=v is not
accounted for and thus the outarg area may be too small.
The fix is to make sure that we evaluate any potentially panicing
operation before we write any of the args to the stack. It turns out
that fix is pretty easy, as we already have such a mechanism available
for function args. We just need to extend it to possibly panicing args
as well.
The resulting code (if b and c can panic, but a can't) is:
tmpb = eval(b)
*(SP+16) = eval(c)
*(SP+0) = eval(a)
*(SP+8) = tmpb
call f
This change tickled a bug in how we find the arguments for intrinsic
calls, so that latent bug is fixed up as well.
Update #16760.
Change-Id: I0bf5edf370220f82bc036cf2085ecc24f356d166
Reviewed-on: https://go-review.googlesource.com/32551
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The code to do the conversion is smaller than the
call to the runtime.
The 1-result asserts need to call panic if they fail, but that
code is out of line.
The only conversions left in the runtime are those which
might allocate and those which might need to generate an itab.
Given the following types:
type E interface{}
type I interface { foo() }
type I2 iterface { foo(); bar() }
type Big [10]int
func (b Big) foo() { ... }
This CL inlines the following conversions:
was assertE2T
var e E = ...
b := i.(Big)
was assertE2T2
var e E = ...
b, ok := i.(Big)
was assertI2T
var i I = ...
b := i.(Big)
was assertI2T2
var i I = ...
b, ok := i.(Big)
was assertI2E
var i I = ...
e := i.(E)
was assertI2E2
var i I = ...
e, ok := i.(E)
These are the remaining runtime calls:
convT2E:
var b Big = ...
var e E = b
convT2I:
var b Big = ...
var i I = b
convI2I:
var i2 I2 = ...
var i I = i2
assertE2I:
var e E = ...
i := e.(I)
assertE2I2:
var e E = ...
i, ok := e.(I)
assertI2I:
var i I = ...
i2 := i.(I2)
assertI2I2:
var i I = ...
i2, ok := i.(I2)
Fixes#17405Fixes#8422
Change-Id: Ida2367bf8ce3cd2c6bb599a1814f1d275afabe21
Reviewed-on: https://go-review.googlesource.com/32313
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
We generate an OpKeepAlive for the idata portion of the interface
for a runtime.KeepAlive call. But given such an op, we need to keep
the entire containing variable alive, not just the range that was
passed to the OpKeepAlive operation.
Fixes#17710
Change-Id: I90de66ec8065e22fb09bcf9722999ddda289ae6e
Reviewed-on: https://go-review.googlesource.com/32477
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
Instead of writing out the original object for each alias, ensure we
export the original object before any aliases. This allows the aliases
to simply refer back to the original object by qualified name.
Fixes#17636.
Change-Id: If80fa8c66b8fee8344a00b55d25a8aef22abd859
Reviewed-on: https://go-review.googlesource.com/32575
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Alan Donovan <adonovan@google.com>
It's never set anywhere, and even if it was, it would just Fatalf.
Change-Id: I84ade6d2068c623a8c85f84d8cdce38984996ddd
Reviewed-on: https://go-review.googlesource.com/32489
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This feels a bit like a layering violation, but as the bug report shows
it is sometimes necessary.
Fixes#17642
Change-Id: I4ba060bb1ce73a527ce276e5a769c44692b50016
Reviewed-on: https://go-review.googlesource.com/32236
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
When the err from ReadFile is non-nil, we call t.Fatal(err).
Switch t.Fatal to t.Error + return.
ensure that close(results) happens on that code path as well.
Updates #17697.
Change-Id: Ifaacf27a76c175446d642086ff32f4386428080d
Reviewed-on: https://go-review.googlesource.com/32486
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
There is no benefit to folding ADDconsts unless the resultant immediate
will fit into a 20-bit signed integer, so limit these rules accordingly.
Also the signed load operations were missing, so I've added them, and
I've also removed some MOVDaddr rules that were dead code (MOVDaddrs
are rematerializable on s390x which means they can't take inputs other
than SP or SB).
Change-Id: Iebeba78da37d3d71d32d4b7f49fe4ea9095d40ec
Reviewed-on: https://go-review.googlesource.com/30616
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
If no error handler is provided, terminate parsing with first error
and report that error.
Fixes#17697.
Change-Id: I9070faf7239bd53725de141507912b92ded3474b
Reviewed-on: https://go-review.googlesource.com/32456
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
typecheckcomplit nils out node's type, upon finding new errors.
This hides new errors in children's node as well as the type info
of current node. This change fixes that.
Fixes#17645.
Change-Id: Ib473291f31c7e8fa0307cb1d494e0c112ddd3583
Reviewed-on: https://go-review.googlesource.com/32324
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Previously, on encountering Func.Nname.Type == nil, typecheckfunc()
returned without initializing Decldepth for that func. This causes
typecheckclosure() to fatal. This change ensures that we initialize
Decldepth in all cases.
Fixes#17588.
Change-Id: I2e3c81ad52e8383395025388989e8dbf03438b68
Reviewed-on: https://go-review.googlesource.com/32415
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We used to have to keep on-stack copies of these types.
Now they can be registerized.
[0]T is kind of trivial but might as well handle it.
This change enables another change I'm working on to improve how x.(T)
expressions are handled (#17405). This CL helps because now all
types that are direct interface types are registerizeable (e.g. [1]*byte).
No higher-degree arrays for now because non-constant indexes are hard.
Update #17405
Change-Id: I2399940965d17b3969ae66f6fe447a8cefdd6edd
Reviewed-on: https://go-review.googlesource.com/32416
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This is an extension of
https://go-review.googlesource.com/c/31662/
to mark all the temporaries, not just the ssa-generated ones.
Before-and-after ls -l `go tool -n compile` shows a 3%
reduction in size (or rather, a prior 3% inflation for
failing to filter temps out properly.)
Replaced name-dependent "is it a temp?" tests with calls to
*Node.IsAutoTmp(), which depends on AutoTemp. Also replace
calls to istemp(n) with n.IsAutoTmp(), to reduce duplication
and clean up function name space. Generated temporaries
now come with a "." prefix to avoid (apparently harmless)
clashes with legal Go variable names.
Fixes#17644.
Fixes#17240.
Change-Id: If1417f29c79a7275d7303ddf859b51472890fd43
Reviewed-on: https://go-review.googlesource.com/32255
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
-M, -P, and -R were for debugging backend passes that no longer
exists.
-g is used for debugging instructions generated with Gins, but the SSA
backend mostly generates instructions directly. The handful of
instructions still generated with Gins are pretty useless for
debugging.
-x was used to debug the old lexer, but now it only causes us to print
file names as they're parsed, and only if we manually hack the
compiler to enable tracing.
Change-Id: Ia58d4bc9c1312693466171a3fcefc1221e9a2381
Reviewed-on: https://go-review.googlesource.com/32428
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Improves the error message by moving the field name before the body
of a struct, in the error message for unknown fields for structs.
* Exhibit:
Given program:
package main
import "time"
func main() {
_ = struct {
about string
before map[string]uint
update map[string]int
updateTime time.Time
expect map[string]int
}{
about: "this one",
updates: map[string]int{"gopher": 10},
}
}
* Before:
./issue17631.go:20: unknown struct { about string; before map[string]uint;
update map[string]int; updateTime time.Time; expect map[string]int } field
'updates' in struct literal
* After:
./issue17631.go:20: unknown field 'updates' in struct literal of type { about string;
before map[string]uint; update map[string]int; updateTime time.Time;
expect map[string]int }
Fixes#17631
Change-Id: I76842616411b931b5ad7a76bd42860dfde7739f4
Reviewed-on: https://go-review.googlesource.com/32240
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Use "have" and "want" and multiple lines like other similar error
messages. Also, fix handling of ... and multi-value function calls.
Fixes#17650.
Change-Id: I4850e79c080eac8df3b92a4accf9e470dff63c9a
Reviewed-on: https://go-review.googlesource.com/32261
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, zeroing generates an ssa.OpZero, which never has write
barriers, even if the assignment is an OASWB. The hybrid barrier
requires write barriers on zeroing, so change OASWB to generate an
ssa.OpZeroWB when assigning the zero value, which turns into a
typedmemclr.
Updates #17503.
Change-Id: Ib37ac5e39f578447dbd6b36a6a54117d5624784d
Reviewed-on: https://go-review.googlesource.com/31451
Reviewed-by: Cherry Zhang <cherryyz@google.com>
If a slice's backing store has pointers, we need to lower clears of
that slice to memclrHasPointers instead of memclrNoHeapPointers.
Updates #17503.
Change-Id: I20750e4bf57f7b8862f3d898bfb32d964b91d07b
Reviewed-on: https://go-review.googlesource.com/31450
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Since barrier-less memclr is only safe in very narrow circumstances,
this commit renames memclr to avoid accidentally calling memclr on
typed memory. This can cause subtle, non-deterministic bugs, so it's
worth some effort to prevent. In the near term, this will also prevent
bugs creeping in from any concurrent CLs that add calls to memclr; if
this happens, whichever patch hits master second will fail to compile.
This also adds the other new memclr variants to the compiler's
builtin.go to minimize the churn on that binary blob. We'll use these
in future commits.
Updates #17503.
Change-Id: I00eead049f5bd35ca107ea525966831f3d1ed9ca
Reviewed-on: https://go-review.googlesource.com/31369
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
The mechanism is initially introduced (and reviewed) in CL 30597
on S390X.
Reduce number of "spilled value remains" by 0.4% in cmd/go.
Disabled on ARMv5 because LR is clobbered almost everywhere with
inserted softfloat calls.
Change-Id: I2934737ce2455909647ed2118fe2bd6f0aa5ac52
Reviewed-on: https://go-review.googlesource.com/32178
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
- removes the runtime function stringtoslicebytetmp
- removes the generation of calls to stringtoslicebytetmp from the frontend
- adds handling of OSTRARRAYBYTETMP in the backend
This reduces binary sizes and avoids function call overhead.
Change-Id: Ib9988d48549cee663b685b4897a483f94727b940
Reviewed-on: https://go-review.googlesource.com/32158
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Martin Möhrmann <martisch@uos.de>
TryBot-Result: Gobot Gobot <gobot@golang.org>
For cases where we already have the ops, combine
sign or zero extension with the previous load
(even if the load is larger width).
Update #15105
Change-Id: I76c5ddd69e1f900d2a17d35503083bd3b4978e48
Reviewed-on: https://go-review.googlesource.com/28190
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Use a local map during inlining instead.
Change-Id: I10cd19885e7124f812bb04a79dbda52bfebfe1a1
Reviewed-on: https://go-review.googlesource.com/32225
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
var x uint64
uint8(x >> 56)
We don't need to generate any code for the uint8().
Update #15090
Change-Id: Ie1ca4e32022dccf7f7bc42d531a285521fb67872
Reviewed-on: https://go-review.googlesource.com/28191
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
When we do
var x []byte = ...
y := x[i:]
We can't just use y.ptr = x.ptr + i, as the new pointer may point to the
next object in memory after the backing array.
We used to fix this by doing:
y.cap = x.cap - i
delta := i
if y.cap == 0 {
delta = 0
}
y.ptr = x.ptr + delta
That generates a branch in what is otherwise straight-line code.
Better to do:
y.cap = x.cap - i
mask := (y.cap - 1) >> 63 // -1 if y.cap==0, 0 otherwise
y.ptr = x.ptr + i &^ mask
It's about the same number of instructions (~4, depending on what
parts are constant, and the target architecture), but it is all
inline. It plays nicely with CSE, and the mask can be computed
in parallel with the index (in cases where a multiply is required).
It is a minor win in both speed and space.
Change-Id: Ied60465a0b8abb683c02208402e5bb7ac0e8370f
Reviewed-on: https://go-review.googlesource.com/32022
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
I had added this originally so we can play with different notations
but it doesn't make sense to keep it around since gofmt will convert
a type alias declaration using "=" into one using "=>" anyhow. More
importantly, the spec doesn't permit it.
Change-Id: Icb010b5a9976aebf877e48b3ce9d7245559ca494
Reviewed-on: https://go-review.googlesource.com/32105
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Otherwise, the way the ELF dynamic linker works means that you can end up with
the same itab being passed to additab twice, leading to the itab linked list
having a cycle in it. Add a test to additab in runtime to catch this when it
happens, not some arbitrary and surprsing time later.
Fixes#17594
Change-Id: I6c82edcc9ac88ac188d1185370242dc92f46b1ad
Reviewed-on: https://go-review.googlesource.com/32131
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL completes support for alias declarations in the compiler.
Also:
- increased export format version
- updated various comments
For #16339.
Fixes#17487.
Change-Id: Ic6945fc44c0041771eaf9dcfe973f601d14de069
Reviewed-on: https://go-review.googlesource.com/32090
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Fixes a bug where assignments that should come after a call
were instead being issued before the call.
Fixes#17596Fixes#17618
Change-Id: Ic9ae4c34ae38fc4ccd0604b65345b05896a2c295
Reviewed-on: https://go-review.googlesource.com/32226
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
The mechanism is initially introduced (and reviewed) in CL 30597
on S390X.
Change-Id: I83024d2fc84c8efc23fbda52b3ad83073f42cb93
Reviewed-on: https://go-review.googlesource.com/32179
Reviewed-by: David Chase <drchase@google.com>
The mechanism is initially introduced (and reviewed) in CL 30597
on S390X.
Change-Id: I12fbe6e9269b2936690e0ec896cb6b5aa40ad7da
Reviewed-on: https://go-review.googlesource.com/32180
Reviewed-by: David Chase <drchase@google.com>
DUFFZERO was disabled due to issue #12108. CL 27592 fixed it and
enabled DUFFZERO in general, but this one was forgotten.
Change-Id: I0476a3a0524c7b54218f7a747bdba76cd823fbc5
Reviewed-on: https://go-review.googlesource.com/32181
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
With the removal of the old backend,
a Label is just a Node.
Passes toolstash -cmp.
Change-Id: Ia62cb00fbc551efb75a4ed4dc6ed54fca0831dbf
Reviewed-on: https://go-review.googlesource.com/32216
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
EscScope behaves like EscHeap in current code.
There are no need to handle it specially.
So remove it and use EscHeap instead.
Change-Id: I910106fd147f00e5f4fd52c7dde05128141a5160
Reviewed-on: https://go-review.googlesource.com/32130
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Don't include package path when creating LSyms for auto and param
variables during Prog generation, and update the DWARF emit routine
accordingly (remove the code that chops off package path from names in
DWARF var location expressions). Implementation suggested by mdempsky@.
The intent of this change is to have saner location expressions in cases
where the variable corresponds to a structure field. For example, the
SSA compiler's "decompose" phase can take a slice value and break it
apart into three scalar variables corresponding to the fields (slice "X"
gets split into "X.len", "X.cap", "X.ptr"). In such cases we want the
name in the location expression to omit the package path but preserve
the original variable name (e.g. "X").
Fixes#16338
Change-Id: Ibc444e7f3454b70fc500a33f0397e669d127daa1
Reviewed-on: https://go-review.googlesource.com/31819
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Sometimes neither the src nor the dst of an escape edge
contains the line number appropriate to the edge, so add
a field so that can be set correctly.
Also updated some of the explanations to be less jargon-y
and perhaps more informative, and folded bug example into
test.
Cleaned up some of the function/method names in esc.go
and did a quick sanity check that each "bundling" function
was actually called often enough to justify its existence.
Fixes#17459.
Change-Id: Ieba53ab0a6ba1f7a6c4962bc0b702ede9cc3a3cc
Reviewed-on: https://go-review.googlesource.com/31660
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Now that SSA's write barrier pass is generating calls to these,
compile doesn't need to look them up.
Change-Id: Ib50e5f2c67b247ca280d467c399e23877988bc12
Reviewed-on: https://go-review.googlesource.com/32170
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This CL introduces some minor changes to match rules more closely
to the instructions they are targeting. s390x logical operation
with immediate instructions typically leave some bits in the
target register unchanged. This means for example that an XOR
with -1 requires 2 instructions. It is better in cases such as
this to create a constant and leave it visible to the compiler
so that it can be reused rather than hiding it in the assembler.
This CL also tweaks the rules a bit to ensure that constants are
folded when possible.
Change-Id: I1c6dee31ece00fc3c5fdf6a24f1abbc91dd2db2a
Reviewed-on: https://go-review.googlesource.com/31754
Reviewed-by: Keith Randall <khr@golang.org>
When the compiler insert write barriers, the frontend makes
conservative decisions at an early stage. This may have false
positives which result in write barriers for stack writes.
A new phase, writebarrier, is added to the SSA backend, to delay
the decision and eliminate false positives. The frontend still
makes conservative decisions. When building SSA, instead of
emitting runtime calls directly, it emits WB ops (StoreWB,
MoveWB, etc.), which will be expanded to branches and runtime
calls in writebarrier phase. Writes to static locations on stack
are detected and write barriers are removed.
All write barriers of stack writes found by the script from
issue #17330 are eliminated (except two false positives).
Fixes#17330.
Change-Id: I9bd66333da9d0ceb64dcaa3c6f33502798d1a0f8
Reviewed-on: https://go-review.googlesource.com/31131
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Instead of generating typelink symbols in the compiler
mark types that should have typelinks with a flag.
The linker detects this flag and adds the marked types
to the typelink table.
name old s/op new s/op delta
LinkCmdCompile 0.27 ± 6% 0.25 ± 6% -6.93% (p=0.000 n=97+98)
LinkCmdGo 0.30 ± 5% 0.29 ±10% -4.22% (p=0.000 n=97+99)
name old MaxRSS new MaxRSS delta
LinkCmdCompile 112k ± 3% 106k ± 2% -4.85% (p=0.000 n=100+100)
LinkCmdGo 107k ± 3% 103k ± 3% -3.00% (p=0.000 n=100+100)
Change-Id: Ic95dd4b0101e90c1fa262c9c6c03a2028d6b3623
Reviewed-on: https://go-review.googlesource.com/31772
Run-TryBot: Shahar Kohanim <skohanim@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
In sinit.go, gdata can already handle strings and complex, so no
reason to handle them separately.
In obj.go, inline gdatastring and gdatacomplex into gdata, since it's
the only caller. Allows extracting out the common Linksym calls.
Passes toolstash -cmp.
Change-Id: I3cb18d9b4206a8a269c36e0d30a345d8e6caba1f
Reviewed-on: https://go-review.googlesource.com/31498
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
These are emulated by the assembler and we don't need them.
Change-Id: I2b07c5315a5b642fdb5e50b468453260ae121164
Reviewed-on: https://go-review.googlesource.com/31758
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Before go supported buildmode=shared ·f symbols used to be defined
only when they were used. In order to solve #11480 the strategy
was changed to have these symbols defined on declaration which is
less efficient and generates many unneeded symbols.
With this change the best strategy is chosen for each situation,
improving static linking time:
name old s/op new s/op delta
LinkCmdCompile 0.27 ± 5% 0.25 ± 6% -8.22% (p=0.000 n=98+96)
LinkCmdGo 0.30 ± 6% 0.29 ± 8% -5.03% (p=0.000 n=95+99)
name old MaxRSS new MaxRSS delta
LinkCmdCompile 107k ± 2% 98k ± 3% -8.32% (p=0.000 n=99+100)
LinkCmdGo 106k ± 3% 104k ± 3% -1.94% (p=0.000 n=99+100)
Change-Id: I965eeee30541e724fd363804adcd6fda10f965a4
Reviewed-on: https://go-review.googlesource.com/31031
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Adds a rule to generate ANDN for AND x ^y.
Fixes#17567
Change-Id: I3b978058d5663f32c42b1af19bb207eac5622615
Reviewed-on: https://go-review.googlesource.com/31769
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
The Gotype field is only used for ATYPE instructions. Instead of
specially storing the Go type symbol in From.Gotype, just store it in
To.Sym like any other 2-argument instruction would.
Modest reduction in allocations:
name old alloc/op new alloc/op delta
Template 42.0MB ± 0% 41.8MB ± 0% -0.40% (p=0.000 n=9+10)
Unicode 34.3MB ± 0% 34.1MB ± 0% -0.48% (p=0.000 n=9+10)
GoTypes 122MB ± 0% 122MB ± 0% -0.14% (p=0.000 n=9+10)
Compiler 518MB ± 0% 518MB ± 0% -0.04% (p=0.000 n=9+10)
Passes toolstash -cmp.
Change-Id: I0e603266b5d7d4e405106a26369e22773a0d3a91
Reviewed-on: https://go-review.googlesource.com/31850
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Previously, the check to make sure we only considered constant cases
for duplicates was skipping past integer ranges, because those use
n.List instead of n.Left. Thanks to Emmanuel Odeke for investigating
and helping to identify the root cause.
Fixes#17517.
Change-Id: I46fcda8ed9c346ff3a9647d50b83f1555587b740
Reviewed-on: https://go-review.googlesource.com/31716
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
This partially reverts commit 01bf5cc219.
For unknown reasons, this CL was causing an internal test to allocate
1.2GB when it used to allocate less than 300MB.
Change-Id: I41d767781e0ae9e43bf670e2a186ee074821eca4
Reviewed-on: https://go-review.googlesource.com/31674
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Adapt old test for prove's bounds check elimination.
Added missing rule to generic rules that lead to differences
between 32 and 64 bit platforms on sliceopt test.
Added debugging to prove.go that was helpful-to-necessary to
discover that missing rule.
Lowered debugging level on prove.go from 3 to 1; no idea
why it was previously 3.
Change-Id: I09de206aeb2fced9f2796efe2bfd4a59927eda0c
Reviewed-on: https://go-review.googlesource.com/23290
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
For very large input files, use of GOSSAFUNC to obtain a dump
after compilation steps can lead to both unwieldy large output
files and unwieldy larger processes (because the output is
buffered in a string). This flag
-d=ssa/<phase>/dump:<function name>
provides finer control of what is dumped, into a smaller
file, and with less memory overhead in the running compiler.
The special phase name "build" is added to allow printing
of the just-built ssa before any transformations are applied.
This was helpful in making sense of the gogo/protobuf
problems.
The output format was tweaked to remove gratuitous spaces,
and a crude -d=ssa/help help text was added.
Change-Id: If7516e22203420eb6ed3614f7cee44cb9260f43e
Reviewed-on: https://go-review.googlesource.com/23044
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
mkbuiltin.go now generates builtin.go using go/ast instead of running
the compiler, so we don't need the -A flag anymore.
Passes toolstash -cmp.
Change-Id: Ifa70f4f3c9feae10c723cbec81a0a47c39610090
Reviewed-on: https://go-review.googlesource.com/31497
Reviewed-by: Robert Griesemer <gri@golang.org>
Generating binary export data requires a working Go compiler. Even
trickier to change the export data format itself requires a careful
bootstrapping procedure.
Instead, simply generate normal Go code that lets us directly
construct the builtin runtime declarations.
Passes toolstash -cmp.
Fixes#17508.
Change-Id: I4f6078a3c7507ba40072580695d57c87a5604baf
Reviewed-on: https://go-review.googlesource.com/31493
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reuse the same mechanisms for handling universal builtins like len to
handle unsafe.Sizeof, etc. Allows us to drop package unsafe's export
data, and simplifies some code.
Updates #17508.
Change-Id: I620e0617c24e57e8a2d7cccd0e2de34608779656
Reviewed-on: https://go-review.googlesource.com/31433
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
instrumentnode() accidentally copies parent's already-instrumented nodes
into child's Ninit block. This generates repeated code in race-instrumentation.
This case surfaces only when it duplicates inline-labels, because of
compile time error. In other cases, it silently generates incorrect
instrumented code. This change prevents it from doing so.
Fixes#17449.
Change-Id: Icddf2198990442166307e176b7e20aa0cf6c171c
Reviewed-on: https://go-review.googlesource.com/31317
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Interface methods can't have function bodies, so there's no need to
process their parameter lists as variable declarations. The only
possible reason would be to check for duplicate parameter names and/or
invalid types, but we do that anyway, and have regression tests for it
(test/funcdup.go).
Change-Id: Iedb15335467caa5d872dbab829bf32ab8cf6204d
Reviewed-on: https://go-review.googlesource.com/31430
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Adds the new canMergeLoad function which can be used by rules to
decide whether a load can be merged into an operation. The function
ensures that the merge will not reorder the load relative to memory
operations (for example, stores) in such a way that the block can no
longer be scheduled.
This new function enables transformations such as:
MOVD 0(R1), R2
ADD R2, R3
to:
ADD 0(R1), R3
The two-operand form of the following instructions can now read a
single memory operand:
- ADD
- ADDC
- ADDW
- MULLD
- MULLW
- SUB
- SUBC
- SUBE
- SUBW
- AND
- ANDW
- OR
- ORW
- XOR
- XORW
Improves SHA3 performance by 6-8%.
Updates #15054.
Change-Id: Ibcb9122126cd1a26f2c01c0dfdbb42fe5e7b5b94
Reviewed-on: https://go-review.googlesource.com/29272
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
It's pretty simple. For:
e = (interface{})(i)
Do:
tmp = i.itab
if tmp != nil {
tmp = tmp.typ_ // load type from itab
}
e = eface{tmp, i.data}
It is smaller and faster than calling the runtime.
Change-Id: I0ad27f62f4ec0b6cd53bc8530e4da0eae3e67a6c
Reviewed-on: https://go-review.googlesource.com/31260
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This allows use of newer math/big (and later debug/pe)
without maintaining a vendored copy somewhere in cmd.
Use for math/big, deleting cmd/compile/internal/big.
Change-Id: I2bffa7a9ef115015be29fafdb02acc3e7a665d11
Reviewed-on: https://go-review.googlesource.com/31010
Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
1. Define behavior for Unmarshal of JSON null into Unmarshaler and
TextUnmarshaler. Specifically, an Unmarshaler will be given the
literal null and can decide what to do (because otherwise
json.RawMessage is impossible to implement), and a TextUnmarshaler
will be skipped over (because there is no text to unmarshal), like
most other inappropriate types. Document this in Unmarshal, with a
reminder in UnmarshalJSON about handling null.
2. Test all this.
3. Fix the TextUnmarshaler case, which was returning an unmarshalling
error, to match the definition.
4. Fix the error that had been used for the TextUnmarshaler, since it
was claiming that there was a JSON string when in fact the problem was
NOT having a string.
5. Adjust time.Time and big.Int's UnmarshalJSON to ignore null, as is
conventional.
Fixes#9037.
Change-Id: If78350414eb8dda712867dc8f4ca35a9db041b0c
Reviewed-on: https://go-review.googlesource.com/30944
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Copies utf8 constants and EncodeRune implementation from unicode/utf8.
Adds a new decoderune implementation that is used by the compiler
in code generated for ranging over strings. It does not handle
ASCII runes since these are handled directly before calls to decoderune.
The DecodeRuneInString implementation from unicode/utf8 is not used
since it uses a lookup table that would increase the use of cpu caches.
Adds more tests that check decoding of valid and invalid utf8 sequences.
name old time/op new time/op delta
RuneIterate/range2/ASCII-4 7.45ns ± 2% 7.45ns ± 1% ~ (p=0.634 n=16+16)
RuneIterate/range2/Japanese-4 53.5ns ± 1% 49.2ns ± 2% -8.03% (p=0.000 n=20+20)
RuneIterate/range2/MixedLength-4 46.3ns ± 1% 41.0ns ± 2% -11.57% (p=0.000 n=20+20)
new:
"".decoderune t=1 size=423 args=0x28 locals=0x0
old:
"".charntorune t=1 size=666 args=0x28 locals=0x0
Change-Id: I1df1fdb385bb9ea5e5e71b8818ea2bf5ce62de52
Reviewed-on: https://go-review.googlesource.com/28490
Run-TryBot: Martin Möhrmann <martisch@uos.de>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This adds a //go:notinheap pragma for declarations of types that must
not be heap allocated. We ensure these rules by disallowing new(T),
make([]T), append([]T), or implicit allocation of T, by disallowing
conversions to notinheap types, and by propagating notinheap to any
struct or array that contains notinheap elements.
The utility of this pragma is that we can eliminate write barriers for
writes to pointers to go:notinheap types, since the write barrier is
guaranteed to be a no-op. This will let us mark several scheduler and
memory allocator structures as go:notinheap, which will let us
disallow write barriers in the scheduler and memory allocator much
more thoroughly and also eliminate some problematic hybrid write
barriers.
This also makes go:nowritebarrierrec and go:yeswritebarrierrec much
more powerful. Currently we use go:nowritebarrier all over the place,
but it's almost never what you actually want: when write barriers are
illegal, they're typically illegal for a whole dynamic scope. Partly
this is because go:nowritebarrier has been around longer, but it's
also because go:nowritebarrierrec couldn't be used in situations that
had no-op write barriers or where some nested scope did allow write
barriers. go:notinheap eliminates many no-op write barriers and
go:yeswritebarrierrec makes it possible to opt back in to write
barriers, so these two changes will let us use go:nowritebarrierrec
far more liberally.
This updates #13386, which is about controlling pointers from non-GC'd
memory to GC'd memory. That would require some additional pragma (or
pragmas), but could build on this pragma.
Change-Id: I6314f8f4181535dd166887c9ec239977b54940bd
Reviewed-on: https://go-review.googlesource.com/30939
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This pragma cancels the effect of go:nowritebarrierrec. This is useful
in the scheduler because there are places where we enter a function
without a valid P (and hence cannot have write barriers), but then
obtain a P. This allows us to annotate the function with
go:nowritebarrierrec and split out the part after we've obtained a P
into a go:yeswritebarrierrec function.
Change-Id: Ic8ce4b6d3c074a1ecd8280ad90eaf39f0ffbcc2a
Reviewed-on: https://go-review.googlesource.com/30938
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
"abc"[1] is not like 'b', in that -"abc"[1] is uint8 math, not ideal constant math.
Delay the constantification until after ideal constant folding is over.
Fixes#11370.
Change-Id: Iba2fc00ca2455959e7bab8f4b8b4aac14b1f9858
Reviewed-on: https://go-review.googlesource.com/15740
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Previously, we used OKEY nodes to represent keyed struct literal
elements. The field names were represented by an ONAME node, but this
is clumsy because it's the only remaining case where ONAME was used to
represent a bare identifier and not a variable.
This CL introduces a new OSTRUCTKEY node op for use in struct
literals. These ops instead store the field name in the node's own Sym
field. This is similar in spirit to golang.org/cl/20890.
Significant reduction in allocations for struct literal heavy code
like package unicode:
name old time/op new time/op delta
Template 345ms ± 6% 341ms ± 6% ~ (p=0.141 n=29+28)
Unicode 200ms ± 9% 184ms ± 7% -7.77% (p=0.000 n=29+30)
GoTypes 1.04s ± 3% 1.05s ± 3% ~ (p=0.096 n=30+30)
Compiler 4.47s ± 9% 4.49s ± 6% ~ (p=0.890 n=29+29)
name old user-ns/op new user-ns/op delta
Template 523M ±13% 516M ±17% ~ (p=0.400 n=29+30)
Unicode 334M ±27% 314M ±30% ~ (p=0.093 n=30+30)
GoTypes 1.53G ±10% 1.52G ±10% ~ (p=0.572 n=30+30)
Compiler 6.28G ± 7% 6.34G ±11% ~ (p=0.300 n=30+30)
name old alloc/op new alloc/op delta
Template 44.5MB ± 0% 44.4MB ± 0% -0.35% (p=0.000 n=27+30)
Unicode 39.2MB ± 0% 34.5MB ± 0% -11.79% (p=0.000 n=26+30)
GoTypes 125MB ± 0% 125MB ± 0% -0.12% (p=0.000 n=29+30)
Compiler 515MB ± 0% 515MB ± 0% -0.10% (p=0.000 n=29+30)
name old allocs/op new allocs/op delta
Template 426k ± 0% 424k ± 0% -0.39% (p=0.000 n=29+30)
Unicode 374k ± 0% 323k ± 0% -13.67% (p=0.000 n=29+30)
GoTypes 1.21M ± 0% 1.21M ± 0% -0.14% (p=0.000 n=29+29)
Compiler 4.40M ± 0% 4.39M ± 0% -0.13% (p=0.000 n=29+30)
Passes toolstash/buildall.
Change-Id: Iba4ee765dd1748f67e52fcade1cd75c9f6e13fa9
Reviewed-on: https://go-review.googlesource.com/30974
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Josh Bleecher Snyder
Matthew Dempsky
Keith Randall
Robert Griesemer
Keith Randall
Alexandru Moșoi
Michael Munday
Dave Cheney
Carlos Eduardo Seo
Daniel Martí
Vladimir Stefanovic
Lynn Boger
Hugues Bruant
philhofer
Martin Möhrmann
Cherry Zhang
Jeremy Jackins
David Chase
Michael Stapelberg
khr
Aliaksandr Valialkin
Alberto Donizetti
Eitan Adler
Giovanni Bajo
David Lazar
Austin Clements
Heschi Kreinick
Lorenzo Masini
David R. Jenni
Emmanuel Odeke
Ian Lance Taylor
Ilya Tocar
Kirill Smelkov
Dhananjay Nakrani
Hajime Hoshi
Russ Cox
shawnps
Michael Hudson-Doyle
Brad Fitzpatrick
Kevin Burke
David Crawshaw
Mohit Agarwal
Martin Möhrmann
Hiroshi Ioka
Than McIntosh
shaharko
Joe Tsai
Anthony Canino