The command 'gopls semtok <file>.go' produces a version of <file>.go
decorated with comments describing tokens as semantic tokens. The
format is described towards the top of cmd/semantictokens.go.
There are also tests in testdata/semantic/. a.go is used by lsp_test.go
(with -cover) to show that essentially all of semantic.go is executed.
b.go illustrates the handling of strange, but legal, constructs
like 'const false = nil and non-ascii'. The .golden files show
the expected results.
The implementation will panic, rather than log, on unexpected state.
gopls semtok has been run on all the .go files in x/tools and in
the source distribution. There were no unexpected messages nor panics.
Change-Id: I11715bcc8d6830d1951eb58239978c4a363bbc30
Reviewed-on: https://go-review.googlesource.com/c/tools/+/262198
Run-TryBot: Peter Weinberger <pjw@google.com>
gopls-CI: kokoro <noreply+kokoro@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Peter Weinberger <pjw@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
Multi-module mode works rather differently than module mode, so ideally
we should have good test coverage for it. We can get a lot for a little
by running the marker tests as a module in a multi-module workspace. To
do that, we can move everything one directory lower, and use the
original directory as the root of the workspace.
The mechanics of setting it up are a little distasteful but not too bad.
We prepend a directory to all the paths in the packagestest.Module, and
after Export, move the created go.mod down into that directory. The only
other change is to find the golden files in the right place.
Command line tests use URIs everywhere, and it was too annoying to fix
them, so I didn't bother. Unimported completion tests fail and are
skipped for the moment.
Change-Id: I5a15156ca4c357ca668bfee05deb9493203e43a1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/256821
Trust: Heschi Kreinick <heschi@google.com>
Run-TryBot: Heschi Kreinick <heschi@google.com>
gopls-CI: kokoro <noreply+kokoro@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Mostly a rollback of CL 217541. No changes in the actual tests.
Change-Id: I910551d4750822bd2d8c5039d1cf194e42d01500
Reviewed-on: https://go-review.googlesource.com/c/tools/+/256363
Trust: Heschi Kreinick <heschi@google.com>
Run-TryBot: Heschi Kreinick <heschi@google.com>
gopls-CI: kokoro <noreply+kokoro@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Clean up a stray use of build tags rather than testenv.
Change-Id: Id645b4f6af1f770a47ea8ff3f0d16b14f25976c2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/256360
Trust: Heschi Kreinick <heschi@google.com>
Run-TryBot: Heschi Kreinick <heschi@google.com>
gopls-CI: kokoro <noreply+kokoro@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This change enables the multi-module workspace mode by default, so that
we can catch all of the test failures and edge cases. It is still
disabled in GOPATH mode and for any workspaces that contain a module
with a vendor directory.
A few minor changes had to be made to handle changes caused by the
workspace module pseudoversions.
Updates golang/go#32394
Change-Id: Ib433b269dfc435d73365677945057c1c2cbb1869
Reviewed-on: https://go-review.googlesource.com/c/tools/+/254317
Trust: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
gopls-CI: kokoro <noreply+kokoro@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
gopls has many settings. We want to automatically generate
documentation, and we want to allow clients to perform their own
validation if they so desire.
Using all three of AST, type information, and reflection, generate a
JSON description of the settings and their default values. Add a gopls
command that prints it. Add a documentation generator that uses it to
write settings.md.
I assumed that everything not explicitly documented was experimental,
and moved it into that section. I also moved expandWorkspaceToModule to
experimental; I hope it's not long for this world, personally.
Along the way, rename many fields, make the enum matching case
insensitive, and add a stringer call so that the defaults print nicely.
Fixesgolang/go#33544.
Change-Id: Ibb652002933e355ed3c6038d6ca48345b39b3025
Reviewed-on: https://go-review.googlesource.com/c/tools/+/252322
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Completion is slowly becoming a large part of internal/lsp/source and it
makes sense to move to its own seperate package inside source to make
future refactors easier. As a part of this change, any unexported
members from source required by completion are now exported. Util
functions only required by completion are moved from
internal/lsp/source/util.go to internal/lsp/source/completion/util.go.
Change-Id: I6b7405ec598c910545e649bb0e6aa02ffa653b38
Reviewed-on: https://go-review.googlesource.com/c/tools/+/253178
Run-TryBot: Danish Dua <danishdua@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
* Adds incoming calls hierarchy to gopls. Returns function declarations/function literals/files enclosing the call/s to the function being inpected.
* Updates cmd to show ranges where calls to function in consideration are made by the caller.
* Added tests for incoming calls.
Example:
This example shows call hierarchy for PathEnclosingInterval in tools/go/ast/astutil.go
Show Call Hierarchy View: https://imgur.com/a/9VhspgA
Peek Call Hierarchy View: https://imgur.com/a/XlKubFk
Note:
* Function literals show up as <scope>.func() in call hierarchy since they don't have a name. Here scope is either the function enclosing the literal or a file for top level declarations
* Top level calls (calls not inside a function, ex: to initialize exported variables) show up as the file name
* Clicking on an item shows the the range where a call is made in the scope
Change-Id: I56426139e4e550dfabe43c9e9f1838efd1e43e38
Reviewed-on: https://go-review.googlesource.com/c/tools/+/247699
Run-TryBot: Danish Dua <danishdua@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
* adds gopls command line tool for call hierarchy
* adds lsp setup for call hierarchy
* adds handler for textDocument/prepareCallHierarchy to display selected
identifier and get incoming/outgoing calls for it
* setup testing
Change-Id: I0a0904abdbe11273a56162b6e5be93b97ceb9c26
Reviewed-on: https://go-review.googlesource.com/c/tools/+/246521
Run-TryBot: Danish Dua <danishdua@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
The logic for extracting a function is quite signficant, and the code
is expensive enough that we should only call it when requested by the
user. This means that we should support extracting through a command
rather than text edits in the code action.
To that end, we create a new struct for commands. Features like extract
variable and extract function can supply functions to determine if they
are relevant to the given range, and if so, to generate their text
edits. source.Analyzers now point to Commands, rather than
SuggestedFixFuncs. The "canExtractVariable" and "canExtractFunction"
functions still need improvements, but I think that can be done in a
follow-up.
Change-Id: I9ec894c5abdbb28505a0f84ad7c76aa50977827a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/244598
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Extract function is a code action, similar to extract variable. After
highlighting a selection, if valid, the lightbulb appears to trigger
extraction. The current implementation does not allow users to
extract selections with a return statement.
Updates golang/go#37170
Change-Id: I5fc3b19cf7dbca4407ecf0cc37017661223614d1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/241957
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Josh Baum <joshbaum@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Replacing the text in the comment line-by-line prevents issues to do
with CRLF/LF line endings.
No test, because txtar expects LF line endings, and I didn't think it
was worth more invasive changes to handle this.
Fixesgolang/go#39364.
Change-Id: Ia26b311a851396e4dde1954ebfc1b40c0a3c04fb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/240757
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
I add a code action that triggers upon request of the user. A variable
name is generated manually for the extracted code because the LSP does
not support a user's ability to provide a name.
Change-Id: Id1ec19b49562b7cfbc2cd416378bec9bd021d82f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/240182
Run-TryBot: Josh Baum <joshbaum@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Now that fillstruct is an analyzer, we can simplify the code that calls
it in code_action.go. We introduce a new class of analyzer --
convenience analyzers, which are closer to commands. These represent
suggestions that won't necessarily improve the quality or correctness of
your code, but they offer small helper functions for the user.
This CL also combines the refactor rewrite tests with the suggested fix
tests, since they are effectively the same.
For now, we only support convenience analyzers when a code action was
requested on the same line as the fix. I'm not sure how to otherwise
handle this without bothering the user with unnecessary diagnostics.
Change-Id: I7f0aa198b5ee9964a907d709bae6380093d4ef21
Reviewed-on: https://go-review.googlesource.com/c/tools/+/237687
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Many tools test check for the ability to compile cgo programs.
Consolidate them all into testenv.NeedsTool("cgo").
Change-Id: I62c96e7b4dc72df34b8fdbf10326c7d19e0613e8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/234108
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
When on 1.15+, enable TypecheckCgo. This improves cgo support
significantly, but we'll still have trouble with newly-referenced C
identifiers and changes to the magic comment.
Updates golang/go#35721.
Change-Id: I44dc95ce2d91d552e1e66e3722dc4230ab59fedd
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229779
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Don't show non-vet analyses when they appear in generated files. Vet
analyzers will give useful reports even in generated files.
Fixesgolang/go#38467
Change-Id: I0e628760b386553932de4cf1f5ba39784a205b53
Reviewed-on: https://go-review.googlesource.com/c/tools/+/230597
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change improves our approach to handling type aliases. Previously,
we were not fully qualifying the names in the AST, making the code
inserted in completions incorrect at times. Now, we clone the relevant
AST expr and qualify it. We also add handling for the return values of a
function, instead of just the parameters.
Fixesgolang/go#38230Fixesgolang/go#37283
Change-Id: Ib79f4636891c9b610ae848e9fa4dbae7c63db509
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229319
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
In preparation for a later change where we alter the implementation of
the workspace Symbol method, we now specify the Name that should be used
when constructing a SymbolInformation value from a @symbol annocation.
There is no change in the test expectations.
Change-Id: I4ee5f714d6060aab2ee33ef18339504f443cecdc
Reviewed-on: https://go-review.googlesource.com/c/tools/+/228757
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change is the first step in handling golang/go#38136. Instead of
creating multiple diagnostic reports for type error analyzers, we add
suggested fixes to the existing reports. To match the analyzers for
FindAnalysisError, we add an ErrorMatch function to source.Analyzer.
This is not an ideal solution, but it was the best one I could come up
with without modifying the go/analysis API. analysisinternal could be
used for this purpose, but it seemed to complicated to be worth it, and
this is fairly simple. I think that go/analysis itself might need to be
extended for type error analyzers, but these temporary measures will
help us understand the kinds of features we need for type error
analyzers.
A follow-up CL might be to not add reports for type error analyzers
until the end of source.Diagnostic, which would remove the need for the
look-up.
Fixesgolang/go#38136
Change-Id: I25bc6396b09d49facecd918bf5591d2d5bdf1b3a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/226777
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change uses the new unusedparams analyzer to remove any unused parameters from functions inside of internal/lsp/source :)
Change-Id: I220100e832971b07cd80a701cd8b293fe708af3d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/225997
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The tests will not run because there is no workspacesymbol marker.
Therefore, restore testdata used in WorkspaceSymbols tests, and
initialize data so that the tests run even if the target of the marker
is 0.
Change-Id: I051b842183b7e23bb746cc282fc3921a90ca8df1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/221617
Reviewed-by: Heschi Kreinick <heschi@google.com>
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change adds support when hierarchicalDocumentSymbolSupport is false, this can happen with editors who have not supported textDocument/DocumentSymbol. As a result, these older lsp clients need to recieve []protocol.SymbolInformation rather than []protocol.DocumentSymbol. This change required some changes to internal/lsp/cmd to handle not knowing which type it is receiving, this required manual parsing inside of cmd/symbols.go.
Fixesgolang/go#34893
Change-Id: I944ae24302f155b561047227f65bee34b160def1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/221823
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds support for passing a span to cmd/suggested_fix.go, originally it would just take the filename and apply all the fixes for that file. Now, it can also take just a span within that file and only apply the fixes relevant to that span.
The //@suggestedfix marker now contains an extra parameter to specify which type of codeaction is expected.
Change-Id: I4e94b8dad719f990dc2d0ef3c50816f70f59f737
Reviewed-on: https://go-review.googlesource.com/c/tools/+/222137
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds an upgrade all dependencies codelens on the go.mod file if there are available upgrades.
Updates golang/go#36501
Change-Id: I86c1ae7e7a6dc01b7f5cd7eb18e5a11d96a3acc1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/221108
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change implements support for textDocument/documentLink when it comes to go.mod files.
Updates golang/go#36501
Change-Id: Ic0974e3e858dd1c8df54b7d7abee085bbcb6d4ee
Reviewed-on: https://go-review.googlesource.com/c/tools/+/219938
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change fixes the regex that removes the versions for links so that tests will still run under GOPATH mode. It also removes a link for an import that needed to be downloaded.
Change-Id: I7ed4f500d1bd9d2136188d30952eedb8d8aee6e4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/220140
Run-TryBot: Rohan Challa <rohan@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change appends to the pkg.go.dev link the version of the module that is being used. To get this functionality, go/packages.Package now contains a module field which gets populated from the "go list" call. This module field is then used to get the version of the module that we are linking to.
Updates golang/go#36501
Change-Id: I9668a6da0fd3ec8f4cde017986419c8d28196765
Reviewed-on: https://go-review.googlesource.com/c/tools/+/219079
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
internal/lsp/reset_golden.sh fails when golden file does not exist, so
skip loading the golden file on update.
Additionally, add the missing primarymod directory as the update
destination path so that golden files are placed under the primarymod
directory.
However, keep the location of summary.txt.golden in the same directory
as the primarymod directory.
As a result, some unnecessary data was deleted.
Change-Id: I98120c8b7d483174644600786fd30acdc2e4c52e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/219577
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rohan Challa <rohan@golang.org>
Create a real type for protocol.DocumentURIs. Remove span.NewURI in
favor of path/URI-specific constructors. Remove span.Parse's ability to
parse URI-based spans, which appears to be totally unused.
As a consequence, we no longer mangle non-file URIs to start with
file://, and crash all over the place when one is opened.
Updates golang/go#33699.
Change-Id: Ic7347c9768e38002b4ad9c84471329d0af7d2e05
Reviewed-on: https://go-review.googlesource.com/c/tools/+/219482
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds a code lens for go.mod files that will let a user know if a module can be upgraded, once it is clicked gopls will run a command to update that module.
Updates golang/go#36501
Change-Id: Id22b8097ede4972cf73bc029ec927544a71b7150
Reviewed-on: https://go-review.googlesource.com/c/tools/+/218557
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change allows to use fuzzy or case-sensitive matchers in addition
to case-insensitive when searching for symbols.
Matcher is specified by UserOptions.Matcher just like Completion.
Updates golang/go#33844
Change-Id: I4000fb7984c75f0f41c38d740dbe164398032312
Reviewed-on: https://go-review.googlesource.com/c/tools/+/218737
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change adds quick fixes for diagnostics in .go files, specifically for diagnostics that deal with imported packages that are not declared in the go.mod file. These quick fixes will automatically add the dependency in the go.mod file and format the file if there are any issues.
Updates golang/go#31999
Change-Id: Iab151ce96194fae4b1995859aec416c5473da6e3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/215898
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We should just use the protocol.SignatureInformation type, as it's
essentially the same thing. Refactor tests a bit to make use of the
shared type.
Change-Id: I169949f6e23757ce0a6f54de36560c4c8e0479ad
Reviewed-on: https://go-review.googlesource.com/c/tools/+/217731
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This change adds support for testing go.mod files within packagestest. Primarily, if there are markers in the go.mod file, this will copy the contents to a temporary file, build the modcache, then set the contents back.
Updates golang/go#36091
Change-Id: Icb707906eb7fc9e4a06fe043f94f34d9223d84c9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/216839
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change standardizes the folder structure for testdata that are used for testing the lsp. In particular, it uses the following format:
- dir
- primarymod
- .go files
- packages
- go.mod (optional)
- modules
- repoa
- mod1
- .go files
- packages
- go.mod (optional)
As we can see, any folder inside of testdata should be of this format, where the primary test files with the markers are all located inside the primarymod folder. The modules folder is used to hold any potential dependencies that are used for testing.
A consequence of this change is that we can have one directory separated by folders, where each folder is it's own module, this allows us to use internal/lsp/tests with go.mod files. Now, tests.Load() will return an array of Data objects, where each object corresponds to one of the directories structured above.
Updates golang/go#36091
Change-Id: I437cc2a2a9fc1bac93779845737aa74383fbf9c3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/217541
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds support for the LSP workspace/symbol. Unlike
documentSymbol, the target is symbols that exist not only in a specific
file, but also in the current or imported packages. It returns symbols
whose name contains the query string of the request(case-insensitive),
or all symbols if the query string is empty.
However, the following is not implemented:
- Setting of deprecated and containerName fields in SymbolInformation
- Consideration of WorkspaceClientCapabilities
- Progress support
- CLI support
Updates golang/go#33844
Change-Id: Id2a8d3c468084b9d44228cc6ed2ad37c4b52c405
Reviewed-on: https://go-review.googlesource.com/c/tools/+/213317
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
DefaultOptions was a value type, but held map values. This CL changes it
to a function that returns an Options value that has new instances of
all reference types. It would be better if this function returned a
pointer, but that change ended up being too large. I will need to
refactor handling of options later anyway, in order to support sessions
with differing options for golang.org/issues/34111.
This fixes a race in internal/lsp/tests: internal/hooks/analysis.go
mutates the Analyzers map.
See for example the trybots result at:
https://storage.googleapis.com/go-build-log/0d34f5f0/linux-amd64-race_4ecdf9c8.log
Change-Id: I41be450b590a3f3104ac9a1cb9cb312ea3ff7ff4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/217077
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change adds quickfixes for unused dependencies and dependencies that should not be marked as indirect. It also updates the positions for the diagnostics to make more sense relative to the warning message. There is a testing harness now for suggested fixes.
Updates golang/go#31999
Change-Id: I0db3382bf892fcc2d9ab3b633020d9167a0ad09b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/213917
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change flattens the completion options type into UserOptions and
DebuggingOptions, which will enable us to generate documentation for
these options more effectively. This results in some modifications in
the tests.
Additionally, the fuzzyMatching and caseSensitive boolean flags are
merged into one setting, matcher, which can be used to specify the type
of matcher that is used for completion. Other requests (notably
workspaceSymbols) may need to use a matcher in the future.
Change-Id: I185875e50351be4090c7a2b3340d40286dc9f4a0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212635
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
We only need to return a relatively small number of completions to the
user. There's no point continuing once we have those, so switch the
completion functions to be callback-based, and cancel once we've got
what we want.
Change-Id: Ied199fb1f41346819c7237dfed8251fa3ac73ad7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212634
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
If there are less than 3 args for @item, it does an early
return without recording it for a given pos.
This leads to a panic when tests runner can't lookup
a non-nil item for a pos.
Since other collect* methods seem to use t.Fatal for error
handling, do the same in collectCompletionItems().
Change-Id: I21960731f532b93029e6e06800e0484dc7d599df
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211257
Run-TryBot: Iskander Sharipov <quasilyte@gmail.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
- Add test count to golden file so test count gets checked.
- Make @implementation note take a list of marks similar to completion
tests.
- Get rid of unnecessary intermediate test data type.
Change-Id: I741eb14b77b0b8ed08e86c634ed39457116e8718
Reviewed-on: https://go-review.googlesource.com/c/tools/+/210278
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Peter Weinbergr
Heschi Kreinick
Rebecca Stambler
Danish Dua
Josh Baum
Pei Xian Chee
Martin Asquino
Paul Jolly
Rohan Challa
Daisuke Suzuki
Tomohiro Kusumoto
Rob Findley
Iskander Sharipov
Muir Manders