We pass around verb/args/wd in many places. Bundle them up as an
Invocation instead. goCommandInvocation now updates and returns an input
Invocation.
packages.Config is conceptually an extra layer of parsing and
type-checking on top of a go list invocation. It doesn't make sense for
us to construct the latter using the former. A later CL will construct
the Config in terms of the Invocation; for now duplicate a bit of logic.
Use the environment in the cache key for various module operations
rather than the Config hash. I'm not sure either is fully correct but I
think the environment captures everything that's likely to matter. This
way we don't need Configs in those functions at all.
Change-Id: Iebee2705e63638ab365b3ee18b23f8c3e8ca30ce
Reviewed-on: https://go-review.googlesource.com/c/tools/+/265237
Trust: Heschi Kreinick <heschi@google.com>
Run-TryBot: Heschi Kreinick <heschi@google.com>
gopls-CI: kokoro <noreply+kokoro@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Rename Snapshot.GetFile to GetVersionedFile, and make the signature of
GetFile consistent with the corresponding method on session and cache.
This allows algorithms that depend only on file state to be expressed
using this API. In a subsequent CL, this is used for building and
testing the workspace module.
Preeemptively add the FileSource interface for use in these algorithms.
Change-Id: I550906e554fd290dcdf4cac442d5f223e0f644c1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/263522
Run-TryBot: Robert Findley <rfindley@google.com>
gopls-CI: kokoro <noreply+kokoro@google.com>
Trust: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Workspace mode makes more sense as a property of the snapshot, since
it is determined based on the modules in the workspace. Move it to the
snapshot and enable the GOPATH to modules test. The mode switch means
that we may run `go mod` commands before a `go.mod` is on-disk, so add
handling for that case.
Also, remove the code added in CL 258121 to treat packages starting with
a "_/" the same way as command-line arguments--that's not actually
correct because perfectly valid packages can also have a "_/" package
path prefix.
Fixesgolang/go#40340
Change-Id: I35044f5d108983ba00df1359698bf14217caa982
Reviewed-on: https://go-review.googlesource.com/c/tools/+/260078
Trust: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
gopls-CI: kokoro <noreply+kokoro@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Workspace mode did not yet support major versions other than v0/v1. To
do so, we have to check the major version before creating the fake gopls
workspace pseudoversion that goes in the workspace module.
Fixesgolang/go#41807
Change-Id: I108fe504fdf9e9a0ce23f7102991c9ae78f12a9f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/260004
Trust: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
gopls-CI: kokoro <noreply+kokoro@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
didModifyFiles and DidModifyFiles were tightly coupled but also repeated
each other's work a bit, and inconsistencies in the implementation led
to golang/go#41777.
Push all the work of assigning a "best view" down to the Session, and
always assign it somewhere, matching the logic in ViewOf. This would
in principle allow us to diagnose random files, but we only diagnose
workspace packages.
Fixesgolang/go#41777.
Change-Id: I6dab32b98bdff6edd07032d84a8fec1b82ecd283
Reviewed-on: https://go-review.googlesource.com/c/tools/+/259877
Trust: Heschi Kreinick <heschi@google.com>
Run-TryBot: Heschi Kreinick <heschi@google.com>
gopls-CI: kokoro <noreply+kokoro@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change switches over load and RunProcessEnvFunc to use the
snapshot's modules instead of the view's modURI. These do not seem to
have been the racy parts of CL 257417.
Change-Id: I317a350fc4b0c62d77858455a0e2e61148804ecd
Reviewed-on: https://go-review.googlesource.com/c/tools/+/257969
Trust: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
gopls-CI: kokoro <noreply+kokoro@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Splitting this CL out of CL 257417 to minimize the number of changes.
A few of the view's methods are moved to the snapshot, as they will
soon rely on the snapshot's modules field. Some dead code is also
deleted.
We now populate the snapshot's modules field even when
ExperimentalWorkspaceModule is not true, but we stop looking for modules
after searching the view's root.
Change-Id: Id0068ec10fafcfa6f7694dfcb8aaee8cb025078f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/257961
Trust: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
gopls-CI: kokoro <noreply+kokoro@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
When building the workspace module, prefer a gopls.mod file located at
the root of the view if it exists.
Also do some minor documenting/cleanup along the way.
For golang/go#32394
Change-Id: If87729a766d37e6c834fefe40cfb47b67a36a60c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/256582
Run-TryBot: Robert Findley <rfindley@google.com>
gopls-CI: kokoro <noreply+kokoro@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Trust: Robert Findley <rfindley@google.com>
This change allows a view to have multiple go.mod files associated
with it. This doesn't actually make any changes in internal/lsp/cache
with regards to the view's modURI, but it does do the necessary plumbing
in the client packages.
The next CL will delete modURI.
Updates golang/go#32394
Change-Id: I2312efd69c364aed4244ee3769679885a1ebc7e4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/256941
Trust: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
gopls-CI: kokoro <noreply+kokoro@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change moves package selection to before type checking so we don't
unnecessarily type-check both variants of a package. As a result, exec
time and memory usage for features making calls to GetParsedFile are cut
by half since we only type check either the narrowest or the widest
package.
Change-Id: Ifd076f8c38e33de2bd3509fe17feafccd59d7419
Reviewed-on: https://go-review.googlesource.com/c/tools/+/257240
Run-TryBot: Danish Dua <danishdua@google.com>
gopls-CI: kokoro <noreply+kokoro@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Danish Dua <danishdua@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This CL adds diagnostics to the go.mod file if one of the modules in
the workspace is invalid and causes the initial workspace load to fail.
When the module is fixed, the initial workspace load will be retried.
This CL also introduces the *source.ErrorList error type, which will be
useful in the future as a way of producing diagnostics out of errors.
Updates golang/go#32394
Change-Id: Ib8860a4f16c1983b8512f75e26354512d5a9a86d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/254753
Trust: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
gopls-CI: kokoro <noreply+kokoro@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Wire up a command to generate a gopls.mod file for a multi-module
workspace. In the future, this can actually be used to manage the
workspace, but for now the file is just generated, not actually used.
For golang/go#32394
Change-Id: I8a53da8ac9337bde132c7d8ca8557467f368fc24
Reviewed-on: https://go-review.googlesource.com/c/tools/+/256042
Run-TryBot: Robert Findley <rfindley@google.com>
gopls-CI: kokoro <noreply+kokoro@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Robert Findley <rfindley@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We should be able to smoothly add and remove modules from the workspace.
This change moves the module-related fields from the view into the
snapshot so that they can be easily modified and recomputed. The
workspace module is now a workspaceModuleHandle.
Updates golang/go#32394
Change-Id: I6ade7f223cc6070a29b6021b825586b753a0daf1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/254940
Trust: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
gopls-CI: kokoro <noreply+kokoro@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
We were previously behaving as though the slice/map values in the
options struct could be modified directly. The options should be cloned
before modification. Also, convert any usage of source.Options to
*source.Options.
Fixesgolang/go#39592
Change-Id: Ib39f668bca0fa1038162206bd7793fd2049af576
Reviewed-on: https://go-review.googlesource.com/c/tools/+/254558
Trust: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
gopls-CI: kokoro <noreply+kokoro@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This change enables the multi-module workspace mode by default, so that
we can catch all of the test failures and edge cases. It is still
disabled in GOPATH mode and for any workspaces that contain a module
with a vendor directory.
A few minor changes had to be made to handle changes caused by the
workspace module pseudoversions.
Updates golang/go#32394
Change-Id: Ib433b269dfc435d73365677945057c1c2cbb1869
Reviewed-on: https://go-review.googlesource.com/c/tools/+/254317
Trust: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
gopls-CI: kokoro <noreply+kokoro@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
As we have modified the ways that we control which analyzers get
executed for a given case, we have lost the behavior of enabling and
disabling staticcheck smoothly. This CL splits out the staticcheck
analyzers from the main group so that the "staticcheck" setting can
override whether or not a given staticcheck analysis is enabled.
Fixesgolang/go#41311
Change-Id: I9c1695afe4a8f89cd0ee50a79e83b2f42a2c20cb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/254038
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
gopls-CI: kokoro <noreply+kokoro@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
gopls has many settings. We want to automatically generate
documentation, and we want to allow clients to perform their own
validation if they so desire.
Using all three of AST, type information, and reflection, generate a
JSON description of the settings and their default values. Add a gopls
command that prints it. Add a documentation generator that uses it to
write settings.md.
I assumed that everything not explicitly documented was experimental,
and moved it into that section. I also moved expandWorkspaceToModule to
experimental; I hope it's not long for this world, personally.
Along the way, rename many fields, make the enum matching case
insensitive, and add a stringer call so that the defaults print nicely.
Fixesgolang/go#33544.
Change-Id: Ibb652002933e355ed3c6038d6ca48345b39b3025
Reviewed-on: https://go-review.googlesource.com/c/tools/+/252322
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
CL 248380 forced all type checking to be in the default workspace mode.
In that CL, I said I couldn't think of any features that would break. It
appears I didn't think very hard. Navigation features inside of
dependencies are something I use all the time and they broke.
Reintroduce the ability to get packages in a particular mode, and make
it convenient to get them in all relevant modes. Update some critical
features to do so, and add regression tests.
Fixesgolang/go#40809.
Change-Id: I96279f4ff994203694629ea872795246c410b206
Reviewed-on: https://go-review.googlesource.com/c/tools/+/249120
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
In the past, we assumed that we would only run these functions on the
view's go.mod file. As we expand the concept of a view to possibly
include multiple go.mod files, we need to allow these functions to work
on multiple go.mod files.
Change-Id: If9e7d131007e0977fc48ee2264365773da7d41f7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/248097
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
The GC-based cache has given us a number of problems. First, memory
leaks driven by reference cycles: the Go runtime cannot collect cycles
involving finalizers, which prevents us from writing natural code in
Bind callbacks. If we screw it up, we get a mysterious leak that takes a
long time to track down. Second, the behavior is generally mysterious;
it's hard to predict how long a value lasts, and harder to tell if a
value being live is a bug. Third, we think that it may be interacting
poorly with the GC, resulting in unnecessary memory usage.
The structure of the values we put in the cache is not actually that
complicated -- there are only 5 significant types: parse, typecheck,
analyze, parse mod, and analyze mod. Managing them manually should not
be conceptually difficult, and in fact we already do most of the work
in (*snapshot).clone.
In this CL the cache adds the concept of "generations", which function
as reference counts on cache entries. Entries are still global and
shared across generations, but will be explicitly deleted once no
generations refer to them. The idea is that each snapshot is a new
generation, and can inherit entries from the previous snapshot or leave
them behind to be deleted.
One obvious risk of this scheme is that we'll leave dangling references
to values without actually inheriting them across generations. To
prevent that, getting a value requires passing in the generation at
which it's being read, and an error will be returned if that generation
is dead.
Change-Id: I4b30891efd7be4e10f2b84f4c067b0dee43dcf9c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/242838
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This change adds the notion of a "workspace directory", which is
basically the set of directories that contains workspace packages. These
are mainly used for replace targets right now. It's a little trickier
than expected because the set of workspace directories can technically
change on any go.mod change.
At first, I wanted DidModifyFiles to report whether there was a change,
but I don't think it's actually that expensive to check on each call
and it complicates the code a bit. I can change it back if you think
it's worth doing.
The parse mod handle changes are because I needed an unlocked way of
parsing the mod file, but I imagine they'll conflict with CL 244769
anyway.
The next CL will be to "promote" replace targets to the level of
workspace packages, meaning we will be able to find references in them.
Change-Id: I5dd58fe29415473496ca6634a94a3134923228dc
Reviewed-on: https://go-review.googlesource.com/c/tools/+/245327
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This CL is mostly a refactoring of the logic to compute errors for
`go mod tidy` diagnostics. It had been getting a little confusing, so
hopefully this makes things easier to read.
I made a few other small changes, such as slightly changing a few error
messages and showing diagnostics in the go.mod file for all missing
modules.
Change-Id: Ia8cf580731b997248591a2d64dff133accd9c5aa
Reviewed-on: https://go-review.googlesource.com/c/tools/+/244610
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
snapshot.View().Session().Cache().FileSet() has been driving me crazy
for a while. Add it to snapshot. Along the way, discover that the Cache
interface is now totally unused and delete it.
I also changed a bunch of View arguments to Snapshot while I was in the
area.
Change-Id: I1064d0020b1567c2ed28d2d55e0f4649eb94c060
Reviewed-on: https://go-review.googlesource.com/c/tools/+/245324
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We were returning the AST node for the identifier that the rename was
called from, not the actual declaration, so the doc comments weren't
getting updated.
Fixesgolang/go#40463
Change-Id: Id8ba0b0aeb8f42d2aaa561e7a964edcca5202916
Reviewed-on: https://go-review.googlesource.com/c/tools/+/245817
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
FileHandle currently includes LSP-level information about Version and
Session. That's dangerous, because the cache operates in terms of
URIs and content only -- we explicitly want to share results across
sessions and versions if they happen to be the same.
Split the LSP information into separate types, VersionedFileHandle and
VersionedFileIdentity.
Change-Id: I158646b783375b58245468599301e2a29c657e71
Reviewed-on: https://go-review.googlesource.com/c/tools/+/245058
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
The builtin package was the one special case where we parsed Go outside
the context of a Snapshot. Move it up.
Change-Id: I1f4bb536adb40019e0ea9c5c89f38b15737abb8c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/245057
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
To manually collect cache entries, we need to know when a snapshot is
idle. Add a reference count in the form of a WaitGroup and keep track of
its uses. The pattern is that any time a snapshot is returned, it comes
with a release function that decrements the ref count.
Almost all uses of a snapshot originate in a user-facing request,
handled in beginFileRequest. There it's mostly an exercise in passing
Snapshots around instead of Views.
In the other places I took the path of least resistance. For file
modifications I tried to minimize the amount of code that needed to deal
with snapshots. For diagnostics I just acquired the snapshot at the
diagnostics call.
Change-Id: Id48a2df3acdd97f27d905e2c2be23072f28f196b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/241837
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Continuing the massacre, remove ParseModHandle, and Mod*Handle, from the
source API.
Notably, having the snapshot available means we can simplify the go
command invocation paths a lot.
Change-Id: Ief4ef41e42f93d653f719a230004861e5e1ef70b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/244769
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Just like ParseGoHandle, PackageHandle isn't very useful as part of the
public API. Remove it.
Having PackagesForFile take a URI rather than a FileHandle seems
reasonable, and made me wonder if that logic applies to other calls like
ParseGo. For now I'm going to stop here. I could also revert that part
of the change.
Change-Id: Idba8e9fdba0b0c48e841a698eb97e47fd5f23cf5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/244637
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
ParseGoHandles serve two purposes: they pin cache entries so that
redundant calculations are cached, and they allow users to obtain the
actual parsed AST. The former is an implementation detail, and the
latter turns out to just be an annoyance.
Parsed Go files are obtained from two places. By far the most common is
from a type checked package. But a type checked package must by
definition have already parsed all the files it contains, so the PGH
is already computed and cannot have failed. Type checked packages can
simply return the parsed file without requiring a separate Check
operation. We do want to pin the cache entries in this case, which I've
done by holding on to the PGH in cache.pkg.
There are some cases where we directly parse a file, such as for the
FoldingRange LSP call, which doesn't need type information. Those parses
can actually fail, so we do need an error check. But we don't need the
PGH; in all cases we are immediately using and discarding it.
So it turns out we don't actually need the PGH type at all, at least not
in the public API. Instead, we can pass around a concrete struct that
has the various pieces of data directly available.
This uncovered a bug in typeCheck: it should fail if it encounters any
real errors.
Change-Id: I203bf2dd79d5d65c01392d69c2cf4f7744fde7fc
Reviewed-on: https://go-review.googlesource.com/c/tools/+/244021
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Due to the runtime's inability to collect cycles involving finalizers,
we can't close over handles in memoize.Functions without causing memory
leaks. Up until now we've dealt with that by closing over all the bits
of the snapshot that we want, but it distorts the design of all the code
used in the Functions.
We can solve the problem another way: instead of closing over the
snapshot/view, we can force the caller to pass it in. This is somewhat
scary: there is no requirement that the argument matches the data that
we're working with. But the reality is that this is not a new problem:
the Function used to calculate a cache value is not necessarily the one
that the caller expects. As long as the cache key fully identifies all
the inputs to the Function, the output should be correct. And since the
caller used the snapshot/view to calculate that cache key, it should
always be safe to pass in that snapshot/view. If it's not, then we
already had a bug.
The Arg type in memoize is clumsy, but I thought it would be nice to
have at least a little bit of type safety. I'm open to suggestions.
Change-Id: I23f546638b0c66a4698620a986949087211f4762
Reviewed-on: https://go-review.googlesource.com/c/tools/+/244019
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The PackageHandle interface is fairly redundant with the Package
interface. As much as convenient, move users to Package and
weaken/remove methods from PackageHandle.
I would like to get rid of CompiledGoFiles too but
NarrowestPackageHandle is a little annoying. I think this is
unambiguously a step forward so I figured we can get it in and keep
iterating.
Change-Id: I6c5a3f462b1f19cbca6a267fedc36ce54613b6fc
Reviewed-on: https://go-review.googlesource.com/c/tools/+/244018
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The logic for extracting a function is quite signficant, and the code
is expensive enough that we should only call it when requested by the
user. This means that we should support extracting through a command
rather than text edits in the code action.
To that end, we create a new struct for commands. Features like extract
variable and extract function can supply functions to determine if they
are relevant to the given range, and if so, to generate their text
edits. source.Analyzers now point to Commands, rather than
SuggestedFixFuncs. The "canExtractVariable" and "canExtractFunction"
functions still need improvements, but I think that can be done in a
follow-up.
Change-Id: I9ec894c5abdbb28505a0f84ad7c76aa50977827a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/244598
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This CL is a follow-up from CL 241983. I didn't realize that the
undeclaredname analysis was also using the go/printer.Fprint trick,
which we decided was both incorrect and inefficient. This CL does
approximately the same things as CL 241983, with a few changes to make
the approach more general.
source.Analyzer now has a field to indicate if its suggested fix needs
to be computed separately, and that is used to determine which
code actions get commands. We also make helper functions to map
analyses to their commands.
I figured out a neater way to test suggested fixes in this CL, so I
reversed the move to source_test back to lsp_test (which was the right
place all along).
Change-Id: I505bf4790481d887edda8b82897e541ec73fb427
Reviewed-on: https://go-review.googlesource.com/c/tools/+/242366
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change adds support for `go mod tidy` on save when users opt into
import organization on save. Previously, we supported this with the
go mod tidy command, but there's no need to do this when we already
have a ModTidyHandle available.
Change-Id: Ibb47b6a7611fd823dac2a3b4f3a43b9fbb3289b6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/243777
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change attempts to parse diagnostics out of `go list` error
messages so that we can present them in a better way to the user. This
approach is definitely tailored to the unknown revision error described
in golang/go#38232, but we can modify it to handle other cases as well.
Fixesgolang/go#38232
Change-Id: I0b0a8c39a189a127dc36894a25614535c804a3f0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/242477
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Previously, we only updated the opened file's overlay, but not the
snapshot. This meant that the snapshot was still operating with stale
data. Invalidating the snapshot creates a new snapshot with the correct
set of overlays.
The test is skipped because it will flake until we have a better caching
strategy for `go mod tidy` results.
Updates golang/go#40269
Change-Id: Ia8d1ae75127a1d18d8877923e7a5b25b7bd965ac
Reviewed-on: https://go-review.googlesource.com/c/tools/+/243537
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Currently, diagnostics for modules that are missing from the go.mod
appear in the Go files in which those modules are imported. As a result,
the diagnostics were previously calculated as part of the Go file
diagnostic calculations. This is convoluted and required passing around
an extra map.
This CL puts that logic in the ModTidyHandle where it belongs.
The diagnostics for the Go files are combined from the multiple sources.
Also, added a skipped test for golang/go#39784, since this CL was
originally intended to be a fix for that issue...
Change-Id: Ic0f9aa235dcd56ea131a2339de9801346f715415
Reviewed-on: https://go-review.googlesource.com/c/tools/+/242579
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
getFile still returns a FileHandle, even if the file doesn't exist on
disk. Work-around this by checking if the file exists before adding
the file handle to the map.
Fixesgolang/go#38498
Change-Id: Ie02679068b37bf4f3d19966c6cfcf2361086b1de
Reviewed-on: https://go-review.googlesource.com/c/tools/+/242924
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Completion could be slow due to calls to astutil.PathEnclosingInterval
for every candidate during formatting. There were two reasons we
called PEI:
1. To properly render type alias names, we must refer to the AST
because the alias name is not available in the typed world.
Previously we would call PEI to find the *type.Var's
corresponding *ast.Field, but now we have a PosToField cache that
lets us jump straight from the types.Object's token.Pos to the
corresponding *ast.Field.
2. To display an object's documentation we must refer to the AST. We
need the object's declaring node and any containing ast.Decl. We
now maintain a special PosToDecl cache so we can avoid the PEI call
in this case as well.
We can't use a single cache for both because the *ast.Field's position
is present in both caches (but points to different nodes). The caches
are memoized to defer generation until they are needed and to save
work creating them if the *ast.Files haven't changed.
These changes speed up completing the fields of
github.com/aws/aws-sdk-go/service/ec2 from 18.5s to 45ms on my laptop.
Fixesgolang/go#37450.
Change-Id: I25cc5ea39551db728a2348f346342ebebeddd049
Reviewed-on: https://go-review.googlesource.com/c/tools/+/221021
Run-TryBot: Muir Manders <muir@mnd.rs>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Add a symbolStyle configuration option, and use it to parameterize the
following behavior when computing workspace symbols:
+ package (default): include package name in the workspace symbol.
+ full: fully qualify the symbol by import path
+ dynamic: use as the symbol the shortest suffix of the full path that
contains the match.
To implement this, expose package name in the source.Package interface.
To be consistent with other handling in the cache package, define a new
cache.packageName named string type, to avoid confusion with packageID
or packagePath (if confusing those two identifiers was a problem, surely
it is a potential problem for package name as well).
Change-Id: Ic8ed6ba5473b0523b97e677878e5e6bddfff10a7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/236842
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Paul Jolly <paul@myitcv.org.uk>
Previously, our file watching only considered the root directory of the
view, which may not include the entire module or its replaced
dependencies. Now we expand our watching to include the whole module.
As part of testing this, I noticed that VS Code's file watcher actually
only sends updates for files in the workspace, even if we request
notifications for all files in the module. I filed an issue to ask about
this: https://github.com/microsoft/vscode-languageserver-node/issues/641.
Change-Id: I9499d31aff273f69e9c117511e7985ff58b7fdc4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/239198
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change separates out different functions of mod handles.
Previously, we had ModHandle and ModTidyHandle. ModHandle was used to
parse go.mod files and get the results of `go mod why` and possible
dependency upgrades.
Now, we factor this out into 4 handles: ParseModHandle, ModWhyHandle,
ModUpgradeHandle, and ModTidyHandle. This allows each handle to be
specific to its own functionality. It also simplifies the code a bit,
as the handles can be written in terms of ParseModHandles instead of
FileHandles.
I may have some follow-up CLs to refactor the `go mod tidy` logic out of
the cache package, though I'm no longer certain that that's a good
choice.
Change-Id: I8e12299dfdda7bb61b05903d9aa474461d7f4836
Reviewed-on: https://go-review.googlesource.com/c/tools/+/239117
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
These are commands whose changes should be reflected in the existing
go.mod file, as they do not provide edits. Add a third way of running
the go command, explicitly without -modfile. Update the regression test
accordingly.
Change-Id: I866b5db83b504fae190e58c306c01a7a4296672d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/239200
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
The return of IgnoreFile. We continue using go list's ignore rules,
but only apply them to the part of the path underneath the source root.
This should be fixed to include replace targets once we have them.
Change-Id: I054fee8c12fc860a279b0d0c1fd670f44d78a63f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/239288
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Refactor internal/lsp/cache to use a new temporary go.mod file for each
go command invocation. This cleans up the abstraction in the source
package, as we no longer are aware of temporary go.mod files.
This will also fix the raciness of reusing the same temporary go.mod
file for each invocation.
Updates golang/go#37318.
Fixesgolang/go#39504.
Change-Id: I90bc17a678b5df222ab598c8f7dbf6c6fdd393f6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/237517
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Heschi Kreinick
Rob Findley
Rebecca Stambler
Danish Dua
Muir Manders