Rename Snapshot.GetFile to GetVersionedFile, and make the signature of
GetFile consistent with the corresponding method on session and cache.
This allows algorithms that depend only on file state to be expressed
using this API. In a subsequent CL, this is used for building and
testing the workspace module.
Preeemptively add the FileSource interface for use in these algorithms.
Change-Id: I550906e554fd290dcdf4cac442d5f223e0f644c1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/263522
Run-TryBot: Robert Findley <rfindley@google.com>
gopls-CI: kokoro <noreply+kokoro@google.com>
Trust: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change pulls out the logic to process module-related errors from
go/packages.Load out of internal/lsp and into internal/lsp/cache. This
simplifies diagnostic handling in internal/lsp, as we can just return
a *source.ErrorList. Most of this is just a code move, not really a
logical change.
This also fixes the staticcheck error :)
Change-Id: Ic6cad3f59a7e4492dea85b8dcfa9e3f24a371803
Reviewed-on: https://go-review.googlesource.com/c/tools/+/260805
Trust: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
gopls-CI: kokoro <noreply+kokoro@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Workspace mode makes more sense as a property of the snapshot, since
it is determined based on the modules in the workspace. Move it to the
snapshot and enable the GOPATH to modules test. The mode switch means
that we may run `go mod` commands before a `go.mod` is on-disk, so add
handling for that case.
Also, remove the code added in CL 258121 to treat packages starting with
a "_/" the same way as command-line arguments--that's not actually
correct because perfectly valid packages can also have a "_/" package
path prefix.
Fixesgolang/go#40340
Change-Id: I35044f5d108983ba00df1359698bf14217caa982
Reviewed-on: https://go-review.googlesource.com/c/tools/+/260078
Trust: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
gopls-CI: kokoro <noreply+kokoro@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
An experimental new feature is added to run parsing and checking on
modified files immediately, and run analysis and diagnostics for
transitive dependencies only after debouncing. This feature is disabled
by default.
Also, some refactoring is done along the way:
+ Clean up diagnostic functions a bit using a report collection type.
+ Factor out parsing diagnostics in options.go.
Change-Id: I2f14f9e30d79153cb4219207de3d9e77e1f8415b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/255778
Run-TryBot: Robert Findley <rfindley@google.com>
gopls-CI: kokoro <noreply+kokoro@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Trust: Robert Findley <rfindley@google.com>
This change switches over load and RunProcessEnvFunc to use the
snapshot's modules instead of the view's modURI. These do not seem to
have been the racy parts of CL 257417.
Change-Id: I317a350fc4b0c62d77858455a0e2e61148804ecd
Reviewed-on: https://go-review.googlesource.com/c/tools/+/257969
Trust: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
gopls-CI: kokoro <noreply+kokoro@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Splitting this CL out of CL 257417 to minimize the number of changes.
A few of the view's methods are moved to the snapshot, as they will
soon rely on the snapshot's modules field. Some dead code is also
deleted.
We now populate the snapshot's modules field even when
ExperimentalWorkspaceModule is not true, but we stop looking for modules
after searching the view's root.
Change-Id: Id0068ec10fafcfa6f7694dfcb8aaee8cb025078f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/257961
Trust: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
gopls-CI: kokoro <noreply+kokoro@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change allows a view to have multiple go.mod files associated
with it. This doesn't actually make any changes in internal/lsp/cache
with regards to the view's modURI, but it does do the necessary plumbing
in the client packages.
The next CL will delete modURI.
Updates golang/go#32394
Change-Id: I2312efd69c364aed4244ee3769679885a1ebc7e4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/256941
Trust: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
gopls-CI: kokoro <noreply+kokoro@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Show message warnings are annoying to users. Instead, show a diagnostic
for orphaned files. Right now, it will always be there (instead of on
first open). Not sure if users will find this annoying or helpful.
Fixesgolang/go#31668
Change-Id: I5051072b00fee9018d447585fdd9cdfe9df7107a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/256977
Trust: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
gopls-CI: kokoro <noreply+kokoro@google.com>
This CL adds diagnostics to the go.mod file if one of the modules in
the workspace is invalid and causes the initial workspace load to fail.
When the module is fixed, the initial workspace load will be retried.
This CL also introduces the *source.ErrorList error type, which will be
useful in the future as a way of producing diagnostics out of errors.
Updates golang/go#32394
Change-Id: Ib8860a4f16c1983b8512f75e26354512d5a9a86d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/254753
Trust: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
gopls-CI: kokoro <noreply+kokoro@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
The type checker sometimes emits secondary diagnostics. For instance,
if a function is defined twice, then when it sees the second definition
it emits a diagnostic at the second definition and a secondary diagnostic
pointing to the first diagnostic. Presently gopls treats these as two
separate diagnostics. The changed code still produces two diagnostics,
but now the secondary diagnostic is also converted into a
RelatedInformation so the user sees a xpointer to the earlier definition.
Updates https://github.com/golang/go/issues/39062.
Change-Id: Ic421ec91d2b46c28681ab3ec010d5b02c0442e68
Reviewed-on: https://go-review.googlesource.com/c/tools/+/251617
Run-TryBot: Peter Weinberger <pjw@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds a test for this case (empty test file in GOPATH mode)
to go/packages. It is skipped for now, as the go/packages work-around is
too brittle to justify adding. Instead, we suppress gopls-generated
error messages in pop-ups--users should only see error messages if they
come from go/packages.
Fixesgolang/go#40825
Change-Id: I0e2af53578d65739ebae582075498d997fc019d7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/250949
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
CL 244117 introduced a bug when modFile == os.DevNull: v.root is left
uninitialized, resulting in a view that appears to own all files. Fixing
that exposes a problem where opening a folder with no Go files and
GO111MODULE=on shows a popup. Skip the popup when no Go files are found.
Change-Id: I7f8b2d6fd2f954af64c3a65156ff44c649f3a5b2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/248620
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
FileHandle currently includes LSP-level information about Version and
Session. That's dangerous, because the cache operates in terms of
URIs and content only -- we explicitly want to share results across
sessions and versions if they happen to be the same.
Split the LSP information into separate types, VersionedFileHandle and
VersionedFileIdentity.
Change-Id: I158646b783375b58245468599301e2a29c657e71
Reviewed-on: https://go-review.googlesource.com/c/tools/+/245058
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
There were a few merge conflict-related issues in the GC optimization
details CL. Also fixed a few things I noticed after the fact, like
separating out a new mutex.
Staticcheck caught a few things, and I also fixed a bug I noticed
in the cache package.
Change-Id: I3fc519373253418586dca08fdec3114b30a247ea
Reviewed-on: https://go-review.googlesource.com/c/tools/+/245399
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Peter Weinberger <pjw@google.com>
The gc compiler will report its decisions about inlining, escapes, etc.
This can be turned on and off with a new optional code lens gc_details.
When enabled, the code lens will be displayed above the package
statement. The compiler's decisions are shown as information diagnostics.
(Other diagnostics have been errors and warnings.)
Change-Id: I7d1d5b5b5cf8acd7ff08f683e537ea618e269547
Reviewed-on: https://go-review.googlesource.com/c/tools/+/243119
Run-TryBot: Peter Weinberger <pjw@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Just like ParseGoHandle, PackageHandle isn't very useful as part of the
public API. Remove it.
Having PackagesForFile take a URI rather than a FileHandle seems
reasonable, and made me wonder if that logic applies to other calls like
ParseGo. For now I'm going to stop here. I could also revert that part
of the change.
Change-Id: Idba8e9fdba0b0c48e841a698eb97e47fd5f23cf5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/244637
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
ParseGoHandles serve two purposes: they pin cache entries so that
redundant calculations are cached, and they allow users to obtain the
actual parsed AST. The former is an implementation detail, and the
latter turns out to just be an annoyance.
Parsed Go files are obtained from two places. By far the most common is
from a type checked package. But a type checked package must by
definition have already parsed all the files it contains, so the PGH
is already computed and cannot have failed. Type checked packages can
simply return the parsed file without requiring a separate Check
operation. We do want to pin the cache entries in this case, which I've
done by holding on to the PGH in cache.pkg.
There are some cases where we directly parse a file, such as for the
FoldingRange LSP call, which doesn't need type information. Those parses
can actually fail, so we do need an error check. But we don't need the
PGH; in all cases we are immediately using and discarding it.
So it turns out we don't actually need the PGH type at all, at least not
in the public API. Instead, we can pass around a concrete struct that
has the various pieces of data directly available.
This uncovered a bug in typeCheck: it should fail if it encounters any
real errors.
Change-Id: I203bf2dd79d5d65c01392d69c2cf4f7744fde7fc
Reviewed-on: https://go-review.googlesource.com/c/tools/+/244021
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Due to the runtime's inability to collect cycles involving finalizers,
we can't close over handles in memoize.Functions without causing memory
leaks. Up until now we've dealt with that by closing over all the bits
of the snapshot that we want, but it distorts the design of all the code
used in the Functions.
We can solve the problem another way: instead of closing over the
snapshot/view, we can force the caller to pass it in. This is somewhat
scary: there is no requirement that the argument matches the data that
we're working with. But the reality is that this is not a new problem:
the Function used to calculate a cache value is not necessarily the one
that the caller expects. As long as the cache key fully identifies all
the inputs to the Function, the output should be correct. And since the
caller used the snapshot/view to calculate that cache key, it should
always be safe to pass in that snapshot/view. If it's not, then we
already had a bug.
The Arg type in memoize is clumsy, but I thought it would be nice to
have at least a little bit of type safety. I'm open to suggestions.
Change-Id: I23f546638b0c66a4698620a986949087211f4762
Reviewed-on: https://go-review.googlesource.com/c/tools/+/244019
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The PackageHandle interface is fairly redundant with the Package
interface. As much as convenient, move users to Package and
weaken/remove methods from PackageHandle.
I would like to get rid of CompiledGoFiles too but
NarrowestPackageHandle is a little annoying. I think this is
unambiguously a step forward so I figured we can get it in and keep
iterating.
Change-Id: I6c5a3f462b1f19cbca6a267fedc36ce54613b6fc
Reviewed-on: https://go-review.googlesource.com/c/tools/+/244018
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change expands the scope of a workspace to the whole module, if the
user is in module mode. This means that diagnostics will appear and will
be updated for the whole module, even if the user only opens a
subdirectory. Similarly, references and other such queries will always
return consistent results, no matter which directory the user opens.
A new "root" field is added to the view. This is either the view's
folder or its module root. Almost all uses of view.folder have been
changed to view.root.
Updates golang/go#32394
Change-Id: I46f401f7c44b1b8429505aa032e0c15e88c4e2ef
Reviewed-on: https://go-review.googlesource.com/c/tools/+/244117
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
CL 242579 changed the mechanism of reporting diagnostics so that we now
combine reports from multiple sources. Previously, we overwrote existing
diagnostics if new ones were reported. This was fine because
source.Diagnostics generated all of the diagnostics for Go files, and
mod.Diagnostics generated all of the diagnostics for go.mod files.
Now, we combine diagnostics from both sources -- mod.Diagnostics can
generate reports for Go files. We may get duplicate reports for packages
with test variants, so now, we check for those and dedupe.
Change-Id: I42e98079b4eead380058dd029a3a0c72a1796ebb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/243778
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change attempts to parse diagnostics out of `go list` error
messages so that we can present them in a better way to the user. This
approach is definitely tailored to the unknown revision error described
in golang/go#38232, but we can modify it to handle other cases as well.
Fixesgolang/go#38232
Change-Id: I0b0a8c39a189a127dc36894a25614535c804a3f0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/242477
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change ensures that, when the initial workspace load fails, we
re-run it if the go.mod file changes. Previously, if a user opened a
workspace with a corrupt go.mod file, we never recovered.
To reinitialize the workspace on-demand, we use the initializeOnce field
as an indicator of whether or not we should reinitialize. Every call to
awaitInitialized (which is called by all functions that need the IWL),
passes through the initialization code. If a retry isn't necessary,
this is a no-op, but if it is, we will call the initialization logic.
Only the first attempt uses a detached context; subsequent attempts can
be canceled by their contexts.
To indicate that we should reinitialize, we call maybeReinitialize.
Right now, we only call this when the go.mod file changes. In the
future, we may need it in other cases.
Fixesgolang/go#38232
Change-Id: I77eefebb0ac38fbd0fe2c7da09c864eba45b075f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/242159
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Currently, diagnostics for modules that are missing from the go.mod
appear in the Go files in which those modules are imported. As a result,
the diagnostics were previously calculated as part of the Go file
diagnostic calculations. This is convoluted and required passing around
an extra map.
This CL puts that logic in the ModTidyHandle where it belongs.
The diagnostics for the Go files are combined from the multiple sources.
Also, added a skipped test for golang/go#39784, since this CL was
originally intended to be a fix for that issue...
Change-Id: Ic0f9aa235dcd56ea131a2339de9801346f715415
Reviewed-on: https://go-review.googlesource.com/c/tools/+/242579
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
These are commands whose changes should be reflected in the existing
go.mod file, as they do not provide edits. Add a third way of running
the go command, explicitly without -modfile. Update the regression test
accordingly.
Change-Id: I866b5db83b504fae190e58c306c01a7a4296672d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/239200
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Refactor internal/lsp/cache to use a new temporary go.mod file for each
go command invocation. This cleans up the abstraction in the source
package, as we no longer are aware of temporary go.mod files.
This will also fix the raciness of reusing the same temporary go.mod
file for each invocation.
Updates golang/go#37318.
Fixesgolang/go#39504.
Change-Id: I90bc17a678b5df222ab598c8f7dbf6c6fdd393f6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/237517
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
We use file identities pervasively throughout gopls. Prior to this
change, the identity is the modification date of an unopened file, or
the hash of an opened file. That means that opening a file changes its
identity, which causes unnecessary churn in the cache.
Unfortunately, there isn't an easy way to fix this. Changing the
cache key to something else, such as the modification time, means that
we won't unify cache entries if a change is made and then undone. The
approach here is to read files eagerly in GetFile, so that we know their
hashes immediately. That resolves the churn, but means that we do a ton
of file IO at startup.
Incidental changes:
Remove the FileSystem interface; there was only one implementation and
it added a fair amount of cruft. We have many other places that assume
os.Stat and such work.
Add direct accessors to FileHandle for URI, Kind, and Version. Most uses
of (FileHandle).Identity were for stuff that we derive solely from the
URI, and this helped me disentangle them. It is a *ton* of churn,
though. I can revert it if you want.
Change-Id: Ia2133bc527f71daf81c9d674951726a232ca5bc9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/237037
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
In addition to adding a `go mod vendor` command option, which can be
exposed via an editor client frontend, we show a suggestion to users who
experience the "inconsistent vendoring" error message.
The main change made here is that we save the view initialization error,
and we return it if the view has absolutely no metadata. This seems
reasonable enough, but my fear is that it may lead to us showing
outdated error messages. I will spend some time improving the handling
of initialization errors in follow-up CLs.
Updates golang/go#39100
Change-Id: Iba21fb3fbfa4bca956fdf63736b397c47fc7ae44
Reviewed-on: https://go-review.googlesource.com/c/tools/+/235619
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
If the user's workspace is neither in GOPATH nor a module, and there
are errors in their code, send a message (with ShowMessage) only on
the first load, or when the configuration changes. The previous
behavior sent the message more frequently.
There is a regtest, and two new Expectations for when the fake
editor sees (or does not see) a ShowMessage notification.
Fixesgolang/go#37279
Change-Id: I076bd95105359b9310dcf97019e3559159271356
Reviewed-on: https://go-review.googlesource.com/c/tools/+/230897
Run-TryBot: Peter Weinberger <pjw@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
In order for regtests to wait until file diagnostics are complete,
instrument diagnostics with verbose WorkDone reporting. In order for
this to be granular enough for use, the modification source needed to be
threaded through to the didModifyFiles function (which is where the
diagnostic goroutine is spun off).
A new expectation is added: CompletedWork, to allow specifying that a
specific work item has been completed. The problem with using
NoOutstandingWork was that it required a continuous chain of work to
prevent the regtest from succeeding when the bug was present, meaning
that by the time we have sent the didChange notification successfully
the server must have started work on its behalf. This was inherently
racy, and too tricky to get right.
Additionally, a couple bugs are fixed:
- EmptyDiagnostics is corrected to account for the case where we have
received zero diagnostics for a given file.
- A deadlock is fixed in Await when expectations are immediately met.
Updates golang/go#36879Fixesgolang/go#32149
Change-Id: I49ee011860351eed96a3b4f6795804b57a10dc60
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229777
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
event.Log removed
event.Print -> event.Log
event.Record -> event.Metric
event.StartSpan -> event.Start
In order to support this core now exposes the MakeEvent and Export functions.
Change-Id: Ic7550d88dbf400e32c419adbb61d1546c471841e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229238
Reviewed-by: Robert Findley <rfindley@google.com>
internal/telemetry/event was renamed to internal/event/core
Some things were partly moved from internal/telemetry/event straight to
internal/event to minimize churn in the following restructuring.
Change-Id: I8511241c68d2d05f64c52dbe04748086dd325158
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229237
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This change is the first step in handling golang/go#38136. Instead of
creating multiple diagnostic reports for type error analyzers, we add
suggested fixes to the existing reports. To match the analyzers for
FindAnalysisError, we add an ErrorMatch function to source.Analyzer.
This is not an ideal solution, but it was the best one I could come up
with without modifying the go/analysis API. analysisinternal could be
used for this purpose, but it seemed to complicated to be worth it, and
this is fairly simple. I think that go/analysis itself might need to be
extended for type error analyzers, but these temporary measures will
help us understand the kinds of features we need for type error
analyzers.
A follow-up CL might be to not add reports for type error analyzers
until the end of source.Diagnostic, which would remove the need for the
look-up.
Fixesgolang/go#38136
Change-Id: I25bc6396b09d49facecd918bf5591d2d5bdf1b3a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/226777
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change adds a RunGoCommand function to the workspace, which will
allow us to test how gopls responds when a certain go command is
executed. Add a test that checks behavior after "go mod init" runs.
Change-Id: I679249c1654b136d44187397b4196b8a10b5615e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/226478
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This change adds a helper function that checks if the context is
canceled, and if so, doesn't log the error. Tried to use it everywhere
in internal/lsp where it fits, which resulted in changing a few pieces
of error handling throughout.
Updates golang/go#37875
Change-Id: I59cbc6f893e3b70cf84524d9944ff7f4b4febd78
Reviewed-on: https://go-review.googlesource.com/c/tools/+/226371
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
https://github.com/microsoft/vscode-go/issues/3076#issuecomment-605062933
inspired me to write a regression test for this case. Turns out we
weren't handling it correctly after all...
This change makes sure that we only rebuild the view once a new go.mod
file is saved, not just created. It also preserves the snapshot ID
number when the view is recreated so that diagnostic caching continues
to work as expected.
Change-Id: I63bd559c3bd33b91828171cd7ddb3d099c31cddb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/226017
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
If a package starts out as command-line-arguments, and then becomes
"valid" (i.e., gets a package declaration), we shouldn't continue to try
to diagnose "command-line-arguments". We should remove
"command-line-arguments" from workspace packages any time its metadata
is invalidated (assuming it may get added back if a file= query produces
it again).
Include the relevant regression test.
Fixesgolang/go#37978
Change-Id: I7fc51edeb58007b4b4a163336cbeb752a53da322
Reviewed-on: https://go-review.googlesource.com/c/tools/+/225317
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
This is helpful for users to diagnose issues, but it annoys people who
have workspaces with both non-Go and Go projects. I'm going to spend
some more time thinking about this, particularly about which error
messages we should retry the initial workspace load for.
Updates golang/go#32394
Change-Id: I7d02b385da232914fe7342837dc3a9c4185399fd
Reviewed-on: https://go-review.googlesource.com/c/tools/+/225237
Reviewed-by: Heschi Kreinick <heschi@google.com>
We can re-enable this when we have a version of Go that includes the fix
for golang/go#37971. Then we can continue playing whack-a-mole with go
list corner cases :)
Fixesgolang/go#37958
Change-Id: I2417731bf5c01fbde867fef2ef03b5025ae779c7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/224538
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Move the lsp specific telemetry package that just declares the labels under the
debug package and call it tag, to make all the usages much more readable.
Change-Id: Ic89b3408dd3b8b3d914cc69d81f41b8919aaf424
Reviewed-on: https://go-review.googlesource.com/c/tools/+/222850
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
This allows early exporters to adjust the event for later ones.
This is used to lookup key values from the context if needed.
Also add a Query type event which is intended to perform all event
modifications but nothing else, and is used to lookup values from
the context. This cleans up a weirdness where the current lookup
presumes there will be an exporter with a matching mechanism.
Change-Id: I835d1e0b2511553c30f94b7becfe7b7b5462c111
Reviewed-on: https://go-review.googlesource.com/c/tools/+/223657
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Peter Weinbergr
Rebecca Stambler
Rob Findley
Heschi Kreinick
Ian Cottrell