This change or-ifies the last low-hanging rules in generic. Again,
this is limited at short and repetitive rules, where the use or ors
does not impact readability.
Ran rulegen, no change in the actual compiler code.
Change-Id: I972b523bc08532f173a3645b47d6936b6e1218c8
Reviewed-on: https://go-review.googlesource.com/96335
Reviewed-by: Giovanni Bajo <rasky@develer.com>
For now, limited to the most repetitive rules that are also short and
simple, so that we can have a substantial conciseness win without
compromising rules readability.
Ran rulegen, no changes in the rewrite files.
Change-Id: I8447784895a218c5c1b4dfa1cdb355bd73dabfd1
Reviewed-on: https://go-review.googlesource.com/95955
Reviewed-by: Giovanni Bajo <rasky@develer.com>
While tinkering with different block orders for the preemptible
loop experiment, crashed the register allocator with a "bad"
one (these exist). Realized that one knob was controlling
two things (register allocation and branch patterns) and
decided that life would be simpler if the two orders were
independent.
Ran some experiments and determined that we have probably,
mostly, been optimizing for register allocation effects, not
branch effects. Bad block orders for register allocation are
somewhat costly.
This will also allow separate experimentation with perhaps-
better block orders for register allocation.
Change-Id: I6ecf2f24cca178b6f8acc0d3c4caaef043c11ed9
Reviewed-on: https://go-review.googlesource.com/47314
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Enabled when the tool runs with DEBUG_MEMORY_USAGE=1 env var.
After reporting the usage, it waits until user enters input
(helpful when checking top or other memory monitor)
Also adds net/http/pprof to export debug endpoints.
From the trace included in #21870
$ DEBUG_MEMORY_USAGE=1 go tool trace trace.out
2018/02/21 16:04:49 Parsing trace...
after parsing trace
Alloc: 3385747848 Bytes
Sys: 3661654648 Bytes
HeapReleased: 0 Bytes
HeapSys: 3488907264 Bytes
HeapInUse: 3426377728 Bytes
HeapAlloc: 3385747848 Bytes
Enter to continue...
2018/02/21 16:05:09 Serializing trace...
after generating trace
Alloc: 4908929616 Bytes
Sys: 5319063640 Bytes
HeapReleased: 0 Bytes
HeapSys: 5032411136 Bytes
HeapInUse: 4982865920 Bytes
HeapAlloc: 4908929616 Bytes
Enter to continue...
2018/02/21 16:05:18 Splitting trace...
after spliting trace
Alloc: 4909026200 Bytes
Sys: 5319063640 Bytes
HeapReleased: 0 Bytes
HeapSys: 5032411136 Bytes
HeapInUse: 4983046144 Bytes
HeapAlloc: 4909026200 Bytes
Enter to continue...
2018/02/21 16:05:39 Opening browser. Trace viewer is listening on http://127.0.0.1:33661
after httpJsonTrace
Alloc: 5288336048 Bytes
Sys: 7790245896 Bytes
HeapReleased: 0 Bytes
HeapSys: 7381123072 Bytes
HeapInUse: 5324120064 Bytes
HeapAlloc: 5288336048 Bytes
Enter to continue...
Change-Id: I88bb3cb1af3cb62e4643a8cbafd5823672b2e464
Reviewed-on: https://go-review.googlesource.com/92355
Reviewed-by: Peter Weinberger <pjw@google.com>
The existing code was somewhat convoluted and made several assumptions
about the encoding of position bases:
1) The position's base for a file contained a position whose base
pointed to itself (which is true but an implementation detail
of src.Pos).
2) Updating the position base for a line directive required finding
the base of the most recent's base position.
This change simply stores the file's position base and keeps using it
directly for each line directive (instead of getting it from the most
recently updated base).
Change-Id: I4d80da513bededb636eab0ce53257fda73f0dbc0
Reviewed-on: https://go-review.googlesource.com/95736
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Currently, bulkBarrierPreWrite uses inheap to decide whether the
destination is in the heap or whether to check for stack or global
data. However, this isn't the best question to ask.
Instead, get the span directly and query its state. This lets us
directly determine whether this might be a global, or is stack memory,
or is heap memory.
At this point, inheap is no longer used in the hot path, so drop it
from the must-be-inlined list and substitute spanOf.
This will help in a circuitous way with #23862, since fixing that is
going to push inheap very slightly over the inline-able threshold on a
few platforms.
Change-Id: I5360fc1181183598502409f12979899e1e4d45f7
Reviewed-on: https://go-review.googlesource.com/95495
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
The task-oriented trace view presents the execution trace organized
based on goroutines. Often, which P a goroutine was running on is
useful, so this CL includes the P ids in the goroutine execution slices.
R=go1.11
Change-Id: I96539bf8215e5c1cd8cc997a90204f57347c48c8
Reviewed-on: https://go-review.googlesource.com/90221
Reviewed-by: Heschi Kreinick <heschi@google.com>
The GC time for a task is defined by the sum of GC duration
overlapping with the task's duration.
Also, grey out non-overlapping slices in the task-oriented
trace view.
R=go1.11
Change-Id: I42def0eb520f5d9bd07edd265e558706f6fab552
Reviewed-on: https://go-review.googlesource.com/90219
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reuse even more memory, and keep track of it in a long-lived debugState
object rather than piecemeal in the Cache.
Change-Id: Ib6936b4e8594dc6dda1f59ece753c00fd1c136ba
Reviewed-on: https://go-review.googlesource.com/92404
Reviewed-by: David Chase <drchase@google.com>
Change the closures to methods on debugState, mostly just for aesthetic
reasons.
Change-Id: I5242807f7300efafc7efb4eb3bd305ac3ec8e826
Reviewed-on: https://go-review.googlesource.com/92403
Reviewed-by: David Chase <drchase@google.com>
changedVars was functionally a set, but couldn't be iterated over
efficiently. In functions with many variables, the wasted iteration was
costly. Use a sparseSet instead.
(*gc.Node).String() is very expensive: it calls Sprintf, which does
reflection, etc, etc. Instead, just look at .Sym.Name, which is all we
care about.
Change-Id: Ib61cd7b5c796e1813b8859135e85da5bfe2ac686
Reviewed-on: https://go-review.googlesource.com/92402
Reviewed-by: David Chase <drchase@google.com>
Replace the OnStack boolean in VarLoc with a flag bit in StackOffset.
This doesn't get much memory savings since it's still 64-bit aligned,
but does seem to help a bit anyway.
Change liveSlot to fit into 16 bytes. Because nested structs still get
padding, this required inlining it. Fortunately there's not much logic
to copy.
Change-Id: Ie19a409daa41aa310275c4517a021eecf8886441
Reviewed-on: https://go-review.googlesource.com/92401
Reviewed-by: David Chase <drchase@google.com>
For now, limited to the most repetitive rules that are also short and
simple, so that we can have a substantial conciseness win without
compromising rules readability.
Ran rulegen, no changes in the rewrite files.
Change-Id: I8d8cc67d02faca4756cc02402b763f1645ee31de
Reviewed-on: https://go-review.googlesource.com/95935
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
For now, limited to the most repetitive rules that are also short and
simple, so that we can have a substantial conciseness win without
compromising rules readability.
Ran rulegen, no change in the actual compiler code (as expected).
Change-Id: Ia74acc389cd8310eb7fe8f927171fa3d292d2a86
Reviewed-on: https://go-review.googlesource.com/95797
Reviewed-by: Giovanni Bajo <rasky@develer.com>
For now, limited to the most repetitive rules that are also short and
simple, so that we can have a substantial conciseness win without
compromising rules readability.
Ran rulegen, no change in the actual compiler code (as expected).
Change-Id: Ib0bfbbc181fcec095fb78ac752addd1eee0c3575
Reviewed-on: https://go-review.googlesource.com/95796
Reviewed-by: Giovanni Bajo <rasky@develer.com>
No changes in the generated file, as expected.
Change-Id: I30e0404612cd150f1455378b8db1c18b1e12d34e
Reviewed-on: https://go-review.googlesource.com/95616
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We did warn on them in some cases, but not others. In particular, if one
used a slice composite literal with struct pointer elements, and omitted
the type of an element's composite literal, it would not get any warning
even if it should get one.
The issue is that typ.Underlying() can be of type *types.Pointer. Skip
those levels of indirection before checking for a *types.Struct
underlying type.
isLocalType also needed a bit of tweaking to ignore dereferences.
Perhaps that can be rewritten now that we have type info, but let's
leave it for another time.
Fixes#23539.
Change-Id: I727a497284df1325b70d47a756519f5db1add25d
Reviewed-on: https://go-review.googlesource.com/89715
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Sometimes, multiple CLs being merged that create rules on the same
opcodes can cause the generated file to differ compared to a new
regeneration. This is caused by the fact that rulegen splits
generated functions in chunks of 10 rules per function (to avoid
creating functions that are too big). If two CLs add rules to
the same function, they might cause a generated function to
have more than 10 rules, even though each CL individually didn't
pass this limit.
Change-Id: Ib641396b7e9028f80ec8718746969d390a9fbba9
Reviewed-on: https://go-review.googlesource.com/95795
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
For now, limited to the most repetitive rules that are also short and
simple, so that we can have a substantial conciseness win without
compromising rules readability.
Ran rulegen, no change in the actual compiler code (as expected).
Change-Id: Ib1d2b9fbc787379105ec9baf10d2c1e2ff3c4c5c
Reviewed-on: https://go-review.googlesource.com/95615
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
For functions with many local variables, keeping track of every
LocalSlot for every variable is very expensive. Only track the slots
that are actually used by a given variable.
Change-Id: Iaafbce030a782b8b8c4a0eb7cf025e59af899ea4
Reviewed-on: https://go-review.googlesource.com/92400
Reviewed-by: David Chase <drchase@google.com>
Keeping the start state of each block around costs more than just
recomputing them as necessary, especially because many blocks only have
one predecessor and don't need any merging at all. Stop storing the
start state, and reuse predecessors' end states as much as conveniently
possible.
Change-Id: I549bad9e1a35af76a974e46fe69f74cd4dce873b
Reviewed-on: https://go-review.googlesource.com/92399
Reviewed-by: David Chase <drchase@google.com>
This saves an instruction and a register. The new rules
match ~4900 times during all.bash.
Change-Id: I2f867c5e70262004e31f545f3bb89e939c45b718
Reviewed-on: https://go-review.googlesource.com/94767
Reviewed-by: Keith Randall <khr@golang.org>
For now, limited to the most repetitive rules that are also short and
simple, so that we can have a substantial conciseness win without
compromising rules readability.
Ran rulegen, no change in the actual compiler code (as expected).
Change-Id: Ibf157382fb4544c063fbc80406fb9302430728fe
Reviewed-on: https://go-review.googlesource.com/95595
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
For now, limited to a few repetitive boolean rules where the win is
substantial (4+ variants).
Change-Id: I67bce0d356ca7d71a0f15ff98551fe2caff8abf9
Reviewed-on: https://go-review.googlesource.com/95535
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This adds the ability to add a #x:y anchor to the trace view URL that
causes the viewer to initially select from x ms to y ms.
Change-Id: I4a980d8128ecc85dbe41f224e8ae336707a4eaab
Reviewed-on: https://go-review.googlesource.com/60794
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
In addition to look nicer to the eye, this allows to reformat
and indent rules without causing spurious changes to the generated
file, making it easier to spot functional changes.
After this CL, all CLs that will aggregate rules through
the new "|" functionality should cause no changes to the
generated files.
Change-Id: Icec283585ba8d7b91c79d76513c1d83dca4b30aa
Reviewed-on: https://go-review.googlesource.com/95216
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Replace some ints with bool and use arrays istead of slices where
possible.
Change-Id: I510bdaec48f9c437685e72c4a3291cffeb7ef5fc
Reviewed-on: https://go-review.googlesource.com/83859
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When we go from a branch block to a plain block, reset the
branch prediction bit. Downstream passes asssume that if the
branch prediction is set, then the block has 2 successors.
Fixes#23504
Change-Id: I2898ec002228b2e34fe80ce420c6939201c0a5aa
Reviewed-on: https://go-review.googlesource.com/88955
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Instead of
(And64 x x) -> x
(And32 x x) -> x
(And16 x x) -> x
(And8 x x) -> x
we can now do:
(And(64|32|16|8) x x) -> x
Any part of an opcode can have a parenthesized, |-separated list of possibilites.
The rule is then expanded using each piece of the | combo.
If there are multiple | clauses, they get expanded in tandem.
(All the first positions, then all the second positions, etc.)
All places | opcodes appear must have the same count.
A more complicated example:
(MOV(L|SS)load [off1] {sym1} (LEAQ4 [off2] {sym2} ptr idx) mem) && is32Bit(off1+off2) && canMergeSym(sym1, sym2) ->
(MOV(L|SS)loadidx4 [off1+off2] {mergeSym(sym1,sym2)} ptr idx mem)
This meta-rule generates 2 rules, a MOVL and a MOVSS rule.
This CL is carefully orchestrated to not change the generated rules file at all.
In some cases, this means we can't align the rules nicely because it changes
the whitespace in the generated code. I'll clean that up as a separate step.
There are many more opportunites to compactify rules using this new mechanism.
I've just done some examples, there's more to do.
Change-Id: I8a5e748cd0761ccbb12d09b01925b2f1f4b2f608
Reviewed-on: https://go-review.googlesource.com/86595
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Updated docs that go run does not return the exit code of
the compiled binary.
Fixes#23716
Change-Id: Ib85459974c4c6d2760ddba957ef711628098661f
Reviewed-on: https://go-review.googlesource.com/94795
Reviewed-by: Ian Lance Taylor <iant@golang.org>
One of the variables declared in cleantempnopop named 'kill'
does not hold a OVARKILL node but an OVARLIVE node.
Rename that variable to 'live' to differentiate it from the other
variable named kill that holds a OVARKILL node.
Passes toolstash -cmp.
Change-Id: I34c8729e5c303b8cdabe44c9af980d4f16000e4b
Reviewed-on: https://go-review.googlesource.com/88816
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Rename all map implementation and test files to use "map"
as a file name prefix instead of "hashmap" for the implementation
and "map" for the test file names.
Change-Id: I7b317c1f7a660b95c6d1f1a185866f2839e69446
Reviewed-on: https://go-review.googlesource.com/90336
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Fixes#23867, CVE-2018-7187
Change-Id: I5d0ba4923c9ed354ef76290e149c182447f9dfe2
Reviewed-on: https://go-review.googlesource.com/94656
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Before this change, when using -insecure, we permitted any meta import
repo root as long as it contained "://". When not using -insecure, we
restrict meta import repo roots to be valid URLs. People may depend on
that somehow, so permit meta import repo roots to be invalid URLs, but
require them to have valid schemes per RFC 3986.
Fixes#23867
Change-Id: Iac666dfc75ac321bf8639dda5b0dba7c8840922d
Reviewed-on: https://go-review.googlesource.com/94603
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
It's used on Solaris to import symbols from shared libraries, e.g., in
golang.org/x/sys/unix and golang.org/x/net/internal/socket.
We could use a different directive but that would require build tags
in all the places that use it.
Updates #23672
Updates #23749
Change-Id: I47fcf72a6d2862e304204705979c2056c2f78ec5
Reviewed-on: https://go-review.googlesource.com/94018
Run-TryBot: Andrew Bonventre <andybons@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
During DWARF debug generation, the DW_AT_decl_line / DW_AT_decl_file
attributes for variable DIEs were being computed without taking into
account the possibility of "//line" directives. Fix things up to use
the correct src.Pos methods to pick up this info.
Fixes#23704.
Change-Id: I88c21a0e0a9602392be229252d856a6d665868e2
Reviewed-on: https://go-review.googlesource.com/92255
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This CL presents the proposed user annotation API skeleton.
This CL bumps up the trace version to 1.11.
Design doc https://goo.gl/iqJfJ3
Implementation CLs are followed.
The API introduces three basic building blocks. Log, Span, and Task.
Log is for basic logging. When called, the message will be recorded
to the trace along with timestamp, goroutine id, and stack info.
trace.Log(ctx, messageType message)
Span can be thought as an extension of log to record interesting
time interval during a goroutine's execution. A span is local to a
goroutine by definition.
trace.WithSpan(ctx, "doVeryExpensiveOp", func(ctx context) {
/* do something very expensive */
})
Task is higher-level concept that aids tracing of complex operations
that encompass multiple goroutines or are asynchronous.
For example, an RPC request, a HTTP request, a file write, or a
batch job can be traced with a Task.
Note we chose to design the API around context.Context so it allows
easier integration with other tracing tools, often designed around
context.Context as well. Log and WithSpan APIs recognize the task
information embedded in the context and record it in the trace as
well. That allows the Go execution tracer to associate and group
the spans and log messages based on the task information.
In order to create a Task,
ctx, end := trace.NewContext(ctx, "myTask")
defer end()
The Go execution tracer measures the time between the task created
and the task ended for the task latency.
More discussion history in golang.org/cl/59572.
Update #16619
R=go1.11
Change-Id: I59a937048294dafd23a75cf1723c6db461b193cd
Reviewed-on: https://go-review.googlesource.com/63274
Reviewed-by: Austin Clements <austin@google.com>
This change adds ADD/AND/OR/XOR Immediate Shifted instructions for
ppc64x so they are usable in Go asm code. These instructions were
originally present in asm9.go, but they were only usable in that
file (as -AADD, -AANDCC, -AOR, -AXOR). These old mnemonics are now
removed.
Updates #23845
Change-Id: Ifa2fac685e8bc628cb241dd446adfc3068181826
Reviewed-on: https://go-review.googlesource.com/94115
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Per the notice in the Go 1.10 release notes, this change drops the
support for Windows Vista or below (including Windows XP) and
simplifies the code for the sake of maintenance.
There is one exception to the above. The code related to DLL and
system calls still remains in the runtime package. The remaining code
will be refined and used for supporting upcoming Windows versions in
future.
Updates #17245Fixes#23072
Change-Id: I9e2821721f25ef9b83dfbf85be2b7ee5d9023aa5
Reviewed-on: https://go-review.googlesource.com/94255
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The scanner assumed that ~ really meant ^, which may be helpful when
coming from C. But ~ is not a valid Go token, and pretending that it
should be ^ can lead to confusing error messages. Better to be upfront
about it and complain about the invalid character in the first place.
This was code "inherited" from the original yacc parser which was
derived from a C compiler. It's 10 years later and we can probably
assume that people are less confused about C and Go.
Fixes#23587.
Change-Id: I8d8f9b55b0dff009b75c1530d729bf9092c5aea6
Reviewed-on: https://go-review.googlesource.com/94160
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Updating to commit 0e0e5b7254e076a62326ab7305ba49e8515f0c91
from github.com/google/pprof
Recent modifications to the vendored pprof, such as skipping
TestWebInterface to avoid starting a web browser, have all been fixed
upstream.
Change-Id: I72e11108c438e1573bf2f9216e76d157378e8d45
Reviewed-on: https://go-review.googlesource.com/93375
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Also permit passing flags to pkg-config, as we used to.
Also change the error message to refer to https://golang.org/s/invalidflag.
Fixes#23749
Change-Id: I3fbeb4c346610e6fd55e8720e720b0a40e352ab5
Reviewed-on: https://go-review.googlesource.com/93836
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
1) Fix the doc string for syntax.Parse: The returned AST is
always nil if there was an error and an error handler is missing.
2) Adjust the syntax Print and Dump tests such that they print and
dump the AST even in the presence of errors.
Change-Id: If658eabdcc83f578d815070bc65d1a5f6cfaddfc
Reviewed-on: https://go-review.googlesource.com/94157
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Assume that an expression that is not a function call in a defer/go
statement is indeed a function that is just missing its invocation.
Report the error but continue with a sane syntax tree.
Fixes#23586.
Change-Id: Ib45ebac57c83b3e39ae4a1b137ffa291dec5b50d
Reviewed-on: https://go-review.googlesource.com/94156
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Previously, if we typechecked a statement like
var x bool = p1.f == p2.f && p1.g == p2.g
we would correctly update the '&&' node's type from 'untyped bool' to
'bool', but the '==' nodes would stay 'untyped bool'. This is
inconsistent, and caused consistency checks during walk to fail.
This CL doesn't pass toolstash because it seems to slightly affect the
register allocator's heuristics. (Presumably 'untyped bool's were
previously making it all the way through SSA?)
Fixes#23414.
Change-Id: Ia85f8cfc69b5ba35dfeb157f4edf57612ecc3285
Reviewed-on: https://go-review.googlesource.com/94022
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Also, remove parser.error method (in favor of parser.errorAt) as it's only
used twice.
This is a purely cosmetic change.
Change-Id: Idb3b8b50f1c2e4d10de2ffb1c1184ceba8f7de8a
Reviewed-on: https://go-review.googlesource.com/94030
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
It's always useful to distinguish "bool" and "string" from "untyped
bool" and "untyped string", so change typefmt to do this
unconditionally.
Also, while here, replace a bare 0 with its named constant FErr.
Fixes#23833.
Change-Id: I3fcb8d7204686937439caaaf8b3973fc236d0387
Reviewed-on: https://go-review.googlesource.com/94021
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The tag was overwritten by the code for special handling unnamed
parameters.
Fixes#23045.
Change-Id: Ie2e1db3e902a07a2bbbc2a3424cea300f0a42cc3
Reviewed-on: https://go-review.googlesource.com/82775
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Constant fold Not of boolean constants.
Noticed while working on #23504.
Change-Id: I965705154ee7348a1a159fad4e029b922d3171b3
Reviewed-on: https://go-review.googlesource.com/88956
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
Transform (ADDQconst SP) into (LEA SP), because lea is rematerializeable,
so this avoids register spill. We can't mark ADDQconst as rematerializeable,
because it clobbers flags. This makes go binary ~2kb smaller.
For reference here is generated code for function from bug report.
Before:
CALL "".g(SB)
MOVBLZX (SP), AX
LEAQ 8(SP), DI
TESTB AX, AX
JEQ 15
MOVQ "".p(SP), SI
DUFFCOPY $196
MOVQ $0, (SP)
PCDATA $0, $1
CALL "".h(SB)
RET
MOVQ DI, ""..autotmp_2-8(SP) // extra spill
PCDATA $0, $2
CALL "".g(SB)
MOVQ ""..autotmp_2-8(SP), DI // extra register fill
MOVQ "".p(SP), SI
DUFFCOPY $196
MOVQ $1, (SP)
PCDATA $0, $1
CALL "".h(SB)
JMP 14
END
After:
CALL "".g(SB)
MOVBLZX (SP), AX
TESTB AX, AX
JEQ 15
LEAQ 8(SP), DI
MOVQ "".p(SP), SI
DUFFCOPY $196
MOVQ $0, (SP)
PCDATA $0, $1
CALL "".h(SB)
RET
PCDATA $0, $0 // no spill
CALL "".g(SB)
LEAQ 8(SP), DI // rematerialized instead
MOVQ "".p(SP), SI
DUFFCOPY $196
MOVQ $1, (SP)
PCDATA $0, $1
CALL "".h(SB)
JMP 14
END
Fixes#22947
Change-Id: I8f33b860dc6c8828373477171b172ca2ce30074f
Reviewed-on: https://go-review.googlesource.com/81815
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Popcnt has false dependency on output register and generates
MOVQ $0, reg to break it. But recently we switched MOVQ $0, reg
encoding from xor reg, reg to actual mov $0, reg. This CL updates
code generation for popcnt to use actual XOR.
Change-Id: I4c1fc11e85758b53ba2679165fa55614ec54b27d
Reviewed-on: https://go-review.googlesource.com/82516
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Because getStackOffset is a function pointer, the compiler assumes that
its arguments escape. Pass a value instead to avoid heap allocations.
Change-Id: Ib94e5941847f134cd00e873040a4d7fcf15ced26
Reviewed-on: https://go-review.googlesource.com/92397
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Not a big improvement, but does help edge cases like the SSA package.
Change-Id: I40e531110b97efd5f45955be477fd0f4faa8d545
Reviewed-on: https://go-review.googlesource.com/92396
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Using bits.TrailingZeroes instead of iterating over each bit is a small
but easy win for the common case of only one or two registers being set.
I copied in the implementation for use with pre-1.9 bootstraps.
Change-Id: Ieaa768554d7d5239a5617fbf34f1ee0b32ce1de5
Reviewed-on: https://go-review.googlesource.com/92395
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Completely redesign and reimplement location list generation to be more
efficient, and hopefully not too hard to understand.
RegKills are gone. Instead of using the regalloc's liveness
calculations, redo them using the Ops' clobber information. Besides
saving a lot of Values, this avoids adding RegKills to blocks that would
be empty otherwise, which was messing up optimizations. This does mean
that it's much harder to tell whether the generation process is buggy
(there's nothing to cross-check it with), and there may be disagreements
with GC liveness. But the performance gain is significant, and it's nice
not to be messing with earlier compiler phases.
The intermediate representations are gone. Instead of producing
ssa.BlockDebugs, then dwarf.LocationLists, and then finally real
location lists, go directly from the SSA to a (mostly) real location
list. Because the SSA analysis happens before assembly, it stores
encoded block/value IDs where PCs would normally go. It would be easier
to do the SSA analysis after assembly, but I didn't want to retain the
SSA just for that.
Generation proceeds in two phases: first, it traverses the function in
CFG order, storing the state of the block at the beginning and end. End
states are used to produce the start states of the successor blocks. In
the second phase, it traverses in program text order and produces the
location lists. The processing in the second phase is redundant, but
much cheaper than storing the intermediate representation. It might be
possible to combine the two phases somewhat to take advantage of cases
where the CFG matches the block layout, but I haven't tried.
Location lists are finalized by adding a base address selection entry,
translating each encoded block/value ID to a real PC, and adding the
terminating zero entry. This probably won't work on OSX, where dsymutil
will choke on the base address selection. I tried emitting CU-relative
relocations for each address, and it was *very* bad for performance --
it uses more memory storing all the relocations than it does for the
actual location list bytes. I think I'm going to end up synthesizing the
relocations in the linker only on OSX, but TBD.
TestNexting needs updating: with more optimizations working, the
debugger doesn't stop on the continue (line 88) any more, and the test's
duplicate suppression kicks in. Also, dx and dy live a little longer
now, but they have the correct values.
Change-Id: Ie772dfe23a4e389ca573624fac4d05401ae32307
Reviewed-on: https://go-review.googlesource.com/89356
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
We're trying to enable location lists by default, and it's easier to do
that if we don't have to worry about scope tracking at the same time.
We can evaluate their performance impact separately.
However, that does mean that "err" is ambiguous in the test case, so
rename it to err2 for now.
Change-Id: I24f119016185c52b7d9affc74207f6a5b450fb6f
Reviewed-on: https://go-review.googlesource.com/89355
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
The current assembler cannot handle PRFM(immediate) instruciton.
The fix creates a prfopfield struct that contains the eight
prefetch operations and the value to use in instruction. And add
the test cases.
Fixes#22932
Change-Id: I621d611bd930ef3c42306a4372447c46d53b2ccf
Reviewed-on: https://go-review.googlesource.com/81675
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Add support of NEG{V,W} pseudo-instructions, which are translated
to a SUB instruction from R0 with proper width.
Also turn illegal instruction to UNDEF, to avoid crashing in
asmout when it tries to read the operands.
Fixes#23548.
Change-Id: I047b27559ccd9594c3dcf62ab039b636098f30a3
Reviewed-on: https://go-review.googlesource.com/89896
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
On nacl/arm, R12 is clobbered by the RET instruction in function
that has a frame. runtime.udiv doesn't have a frame, so it does
not clobber R12.
Change-Id: I0de448749f615908f6659e92d201ba3eb2f8266d
Reviewed-on: https://go-review.googlesource.com/93116
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Replace explicit range loop that applies orderexprinplace on a
list of nodes with existing helper function orderexprlistinplace.
Passes toolstash -cmp.
Change-Id: Ic8098ed08cf67f319de3faa83b00a5b73bbde95d
Reviewed-on: https://go-review.googlesource.com/88815
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The previous fix had "bug" and "build" in the wrong order.
Fixes#23791
Change-Id: I4897428516b159966c13c1054574c4f6fbf0fbac
Reviewed-on: https://go-review.googlesource.com/94017
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
ordercopyexpr is only called with 0 or 1 as value for the clear
argument. The clear variable in ordercopyexpr is only used in the
call to ordertemp which has a clear argument of type bool.
Change the clear argument of ordercopyexpr from int to bool and change
calls to ordercopyexpr to use false instead of 0 and true instead of 1.
Passes toolstash -cmp.
Change-Id: Ic264aafd3b0c8b99f6ef028ffaa2e30f23f9125a
Reviewed-on: https://go-review.googlesource.com/88115
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
The sub-word shifts need to sign-extend before shifting, to avoid
bringing in data from higher in the argument.
Fixes#23812
Change-Id: I0a95a0b49c48f3b40b85765bb4a9bb492be0cd73
Reviewed-on: https://go-review.googlesource.com/93716
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The former checks if a type has a method called "Format". The latter
checks if a type satisfies fmt.Formatter.
isFormatter does exactly what we want, so it's both simpler and more
accurate. Remove the only use of hasMethod in its favor.
Change-Id: Idc156a99081c3308f98512b87011a04aa8c6638d
Reviewed-on: https://go-review.googlesource.com/91215
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
All the other tools and commands print the usage text to standard error.
"go tool compile" was the odd one out, so fix it.
While at it, make objabi.Flagprint a bit more Go-like with an io.Writer
instead of a file descriptor, which is likely a leftover from the C
days.
Fixes#23234.
Change-Id: I9abf2e79461e61c8c8bfaee2c6bf8faf26e0e6c3
Reviewed-on: https://go-review.googlesource.com/85418
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Just return the result of the function call as they are
both functionally equivalent.
Change-Id: Ia7847c9b018475051bf6f7a7c532b515bd68c024
Reviewed-on: https://go-review.googlesource.com/90375
Run-TryBot: Andrew Bonventre <andybons@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Fixes#23732
Disambiguate "too few" or "too many" values in struct
initializer messages by reporting the name of the literal.
After:
issue23732.go:27:3: too few values in Foo literal
issue23732.go:34:12: too many values in Bar literal
issue23732.go:40:6: too few values in Foo literal
issue23732.go:40:12: too many values in Bar literal
Change-Id: Ieca37298441d907ac78ffe960c5ab55741a362ef
Reviewed-on: https://go-review.googlesource.com/93277
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Now that the buffered write barrier is implemented for all
architectures, we can remove the old eager write barrier
implementation. This CL removes the implementation from the runtime,
support in the compiler for calling it, and updates some compiler
tests that relied on the old eager barrier support. It also makes sure
that all of the useful comments from the old write barrier
implementation still have a place to live.
Fixes#22460.
Updates #21640 since this fixes the layering concerns of the write
barrier (but not the other things in that issue).
Change-Id: I580f93c152e89607e0a72fe43370237ba97bae74
Reviewed-on: https://go-review.googlesource.com/92705
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Rick Hudson <rlh@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Because a call may ultimately invoke runtime.setg, we have to assume
that g may be clobbered by any call. All of the other architectures
that use a g register already do this, but it was missing from the
s390x caller save clobber set.
Change-Id: Ia931638d42c44979839f20d71097acf31475f423
Reviewed-on: https://go-review.googlesource.com/92835
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
R28 is used as the SB register on MIPS64, and it was printed as
"RSB" on both 32-bit and 64-bit MIPS. This is confusing on MIPS32
as there R28 is just a general purpose register. Further, this
string representation is used in the assembler's frontend to parse
register symbols, and this leads to failure in parsing R28 in
MIPS32 assembly code. Change rconv to always print the register
as R28. This fixes the parsing problem on MIPS32, and this is
a reasonable representation on both MIPS32 and MIPS64.
Change-Id: I30d6c0a442fbb08ea615f32f1763b5baadcee1da
Reviewed-on: https://go-review.googlesource.com/92915
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
On mips/mips64, for non-leaf function, RET is assembled as
MOV (SP), R4 // load saved LR
ADD $framesize, SP
JMP (R4)
This clobbers R4 unnecessarily. Use the link register as
temporary instead.
Probably for Go 1.11.
Change-Id: I2209db7be11074ed2e0e0829cace95ebfb709e9f
Reviewed-on: https://go-review.googlesource.com/79016
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Was missing a check in validSymbol.
Fixes#23580.
Can wait for go1.11. Probably safe but the crash is only for
invalid input, so not worth the risk.
Change-Id: I51f88c5be35a8880536147d1fe5c5dd6798c29de
Reviewed-on: https://go-review.googlesource.com/90398
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
R=go1.11.
Now that we have a syntax error test harness, we can add the
proper tests for the recent parser fixes.
For #20800.
For #20789.
For #23385.
For #23434.
A test for #20789 already exists in test/fixedbugs, but this
is the better location for that test. But leaving the existing
one where it is as well.
Change-Id: I5937b9b63bafd1efab467a00344302e717976171
Reviewed-on: https://go-review.googlesource.com/88336
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
R=go1.11
In order to collect comments in the AST and for error testing purposes,
the scanner needs to not only recognize and skip comments, but also be
able to report them if so desired. This change adds a mode flag to the
scanner's init function which controls the scanner behavior around
comments.
In the common case where comments are not needed, there must be no
significant overhead. Thus, comments are reported via a handler upcall
rather than being returned as a _Comment token (which the parser would
have to filter out with every scanner.next() call).
Because the handlers for error messages, directives, and comments all
look the same (they take a position and text), and because directives
look like comments, and errors never start with a '/', this change
simplifies the scanner's init call to only take one (error) handler
instead of 2 or 3 different handlers with identical signature. It is
trivial in the handler to determine if we have an error, directive,
or general comment.
Finally, because directives are comments, when reporting directives
the full comment text is returned now rather than just the directive
text. This simplifies the implementation and makes the scanner API
more regular. Furthermore, it provides important information about
the comment style used by a directive, which may matter eventually
when we fully implement /*line file:line:col*/ directives.
Change-Id: I2adbfcebecd615e4237ed3a832b6ceb9518bf09c
Reviewed-on: https://go-review.googlesource.com/88215
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
R=go1.11
A common error is to write '=' instead of '==' inside the condition
of a simple 'if' statement:
if x = 0 { ... }
Highlight the fact that we have an assignment in the error message
to prevent further confusion.
Fixes#23385.
Change-Id: I1552050fd6da927bd12a1be0977bd2e98eca5885
Reviewed-on: https://go-review.googlesource.com/87316
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
R=go1.11
This implements parsing of /*line file:line*/ and /*line file:line:col*/
directives and also extends the optional column format to regular //line
directives, per #22662.
For a line directive to be recognized, its comment text must start with
the prefix "line " which is followed by one of the following:
:line
:line:col
filename:line
filename:line:col
with at least one : present. The line and col values must be unsigned
decimal integers; everything before is considered part of the filename.
Valid line directives are:
//line :123
//line :123:8
//line foo.go:123
//line C:foo.go:123 (filename is "C:foo.go")
//line C:foo.go:123:8 (filename is "C:foo.go")
/*line ::123*/ (filename is ":")
No matter the comment format, at the moment all directives act as if
they were in //line comments, and column information is ignored.
To be addressed in subsequent CLs.
For #22662.
Change-Id: I1a2dc54bacc94bc6cdedc5229ee13278971f314e
Reviewed-on: https://go-review.googlesource.com/86037
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
CL 137410043 deleted support for split stacks, which means morestack
no longer needed to save its caller's frame or argument size or its
caller's argument pointer. However, this commit failed to update the
comment or delete the line that computed the caller's argument
pointer. Clean these up now.
Change-Id: I65725d3d42c86e8adb6645d5aa80c305d473363d
Reviewed-on: https://go-review.googlesource.com/92437
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This passes toolstash -cmp with one exception: assembly functions that
were declared with a frame size of -4 (or -8) used to record
locals=0xfffffffffffffffc in the object file and now record
locals=0x0. This doesn't affect anything.
Change-Id: I0d15e81770e54222ae329ce4496da06016736771
Reviewed-on: https://go-review.googlesource.com/92041
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
In addition, this makes the arm64 prologue code generation much closer
to the pattern used on other platforms.
This passes toolstash -cmp with one exception: assembly functions that
were declared with a frame size of -8 used to record
locals=0xfffffffffffffff8 in the object file and now record
locals=0x0. This doesn't affect anything.
Change-Id: I0d15e81770e54222ae329ce4496da06016736770
Reviewed-on: https://go-review.googlesource.com/92040
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This adds support on arm for the NOFRAME symbol attribute used by
ppc64 and s390x in preference to using a frame size of -4. This is
modeled on ppc64's implementation of NOFRAME.
This passes toolstash -cmp.
Change-Id: I0d15e81770e54222ae329ce4496da0601673677f
Reviewed-on: https://go-review.googlesource.com/92039
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
For leaf functions with zero-sized frames, there's no point in doing a
stack check, so omit it.
This aligns arm64 with other architectures.
Change-Id: I1fb483d62f1736af10c5110815d3f5a875a46d7f
Reviewed-on: https://go-review.googlesource.com/92037
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The NoFramePointer function flag is no longer used, so this CL
eliminates it. This cleans up some confusion between the compiler's
NoFramePointer flag and obj's NOFRAME flag. NoFramePointer was
intended to eliminate the saved base pointer on x86, but it was
translated into obj's NOFRAME flag. On x86, NOFRAME does mean to omit
the saved base pointer, but on ppc64 and s390x it has a more general
meaning of omitting *everything* from the frame, including the saved
LR and ppc64's "fixed frame". Hence, on ppc64 and s390x there are far
fewer situations where it is safe to set this flag.
Change-Id: If68991310b4d00638128c296bdd57f4ed731b46d
Reviewed-on: https://go-review.googlesource.com/92036
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Currently, tail calls on x86 don't adjust the SP on return, so it's
important that the compiler produce a zero-sized frame and disable the
frame pointer. However, these constraints aren't necessary. For
example, on other architectures it's generally necessary to restore
the saved LR before a tail call, so obj simply makes this work.
Likewise, on x86, there's no reason we can't simply make this work.
Hence, this CL adjusts the compiler to use the same tail call
convention for x86 that we use on LR machines by producing a RET with
a target, rather than a JMP with a target. In fact, obj already
understands this convention for x86 except that it's buggy with
non-zero frame sizes. So we also fix this bug obj. As a result of
these fixes, the compiler no longer needs to mark wrappers as
NoFramePointer since it's now perfectly fine to save the frame
pointer.
In fact, this eliminates the only use of NoFramePointer in the
compiler, which will enable further cleanups.
This also fixes what is very nearly, but not quite, a code generation
bug. NoFramePointer becomes obj.NOFRAME in the object file, which on
ppc64 and s390x means to omit the saved LR. Hence, on these
architectures, NoFramePointer (and NOFRAME) is only safe to set on
leaf functions. However, on *most* architectures, wrappers aren't
necessarily leaf functions because they may call DUFFZERO. We're saved
on ppc64 and s390x only because the compiler doesn't have the rules to
produce DUFFZERO calls on these architectures. Hence, this only works
because the set of LR architectures that implement NOFRAME is disjoint
from the set where the compiler produces DUFFZERO operations. (I
discovered this whole mess when I attempted to add NOFRAME support to
arm.)
Change-Id: Icc589aeb86beacb850d0a6a80bd3024974a33947
Reviewed-on: https://go-review.googlesource.com/92035
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Need 2-result cast so we can check the result correctly.
Fixes#23762
Change-Id: Icac3a5415156fe918988f369d6022a9a29c14089
Reviewed-on: https://go-review.googlesource.com/93078
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Both gcc and clang accept an option -fplugin=code.so to load
a plugin from the ELF shared object file code.so.
Obviously that plugin can then do anything it wants
during the build. This is contrary to the goal of "go get"
never running untrusted code during the build.
(What happens if you choose to run the result of
the build is your responsibility.)
Disallow this behavior by only allowing a small set of
known command-line flags in #cgo CFLAGS directives
(and #cgo LDFLAGS, etc).
The new restrictions can be adjusted by the environment
variables CGO_CFLAGS_ALLOW, CGO_CFLAGS_DISALLOW,
and so on. See the documentation.
In addition to excluding cgo-defined flags, we also have to
make sure that when we pass file names on the command
line, they don't look like flags. So we now refuse to build
packages containing suspicious file names like -x.go.
A wrinkle in all this is that GNU binutils uniformly accept
@foo on the command line to mean "if the file foo exists,
then substitute its contents for @foo in the command line".
So we must also reject @x.go, flags and flag arguments
beginning with @, and so on.
Fixes#23672, CVE-2018-6574.
Change-Id: I59e7c1355155c335a5c5ae0d2cf8fa7aa313940a
Reviewed-on: https://team-review.git.corp.google.com/209949
Reviewed-by: Ian Lance Taylor <iant@google.com>
The linker contains complicated logic for figuring out which float ABI to
indicate it is using on (32 bit) ARM systems: it parses a special section in
host object files to look for a flag indicating use of the hard float ABI. When
loadelf got split into its own package a bug was introduced: if the last host
object file does not contain a float ABI related tag, the ELF header's flag was
set to 0, rather than using the value from the last object file which contained
an ABI tag. Fix the code to only change the value used for the ELF header if a
tag was found.
This fixes an extremely confusing build failure on Ubuntu's armhf builders.
Change-Id: I0845d68d082d1383e4cae84ea85164cdc6bcdddb
Reviewed-on: https://go-review.googlesource.com/92515
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 49490 fixed a warning when compiling the C code generated by cgo,
but it introduced typedef conflicts in Go code that cgo is supposed to
avoid.
Original CL description:
cmd/cgo: fix for function taking pointer typedef
Fixes#19832
Updates #19832Fixes#23720
Change-Id: I22a732db31be0b4f7248c105277ab8ee44ef6cfb
Reviewed-on: https://go-review.googlesource.com/92455
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
When loading multiple elements of an array into a single register,
make sure we treat them as unsigned. When treated as signed, the
upper bits might all be set, causing the shift-or combo to clobber
the values higher in the register.
Fixes#23719.
Change-Id: Ic87da03e9bd0fe2c60bb214b99f846e4e9446052
Reviewed-on: https://go-review.googlesource.com/92335
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
If A's external test package imports B, which imports A,
and A's (internal) test code also adds something to A that
invalidates anything in the export data from a build of A
without its test code, then strictly speaking we need to
rebuild B against the test-augmented version of A before
using it to build A's external test package.
We've been skating by without doing this for a very long time,
but I knew we'd need to handle it better eventually,
I planned for it in the new build cache simplifications,
and the code was ready. Now that we have a real-world
test case that needs it, turn on the "proper rebuilding" code.
It doesn't really matter how much things slow down, since
a real-world test cases that caused an internal compiler error
before is now handled correctly, but it appears to be small:
I wasn't able to measure an effect on "go test -a -c fmt".
And of course most builds won't use -a and will be cached well.
Fixes#6204.
Fixes#23701.
Change-Id: I2cd60cf400d1928428979ab05831f48ff7cee6ca
Reviewed-on: https://go-review.googlesource.com/92215
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For example, the following program is valid:
type T struct {
f interface{}
}
func main() {
fmt.Printf("%s", T{"foo"}) // prints {foo}
}
Since the field is of type interface{}, we might have any value in it.
For example, if we had T{3}, fmt would complain. However, not knowing
what the type under the interface is, we must be conservative.
However, as shown in #17798, we should issue an error if the field's
type is statically known to implement the error or fmt.Stringer
interfaces. In those cases, the user likely wanted the %s format to call
those methods. Keep the vet error in those cases.
While at it, add more field type test cases, such as custom error types,
and interfaces that extend the error interface.
Fixes#23563.
Change-Id: I063885955555917c59da000391b603f0d6dce432
Reviewed-on: https://go-review.googlesource.com/90516
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The current code encodes the wrong option value in the binary.
The fix reconstructs the function opxrrr() that does not encode the option
value into the binary value when arguments is sign or zero-extended register.
Add the relevant test cases and negative tests.
Fixes#23501
Change-Id: Ie5850ead2ad08d9a235a5664869aac5051762f1f
Reviewed-on: https://go-review.googlesource.com/88876
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Otherwise we get into a dependency loop as we try to apply coverage
analysis to sync/atomic when the coverage analysis itself requires
sync/atomic.
Fixes#23694
Change-Id: I3a74ef3881ec5c6197ed348acc7f9e175417f6c7
Reviewed-on: https://go-review.googlesource.com/91875
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Was improperly bypassed in a couple places.
Change-Id: I13426b3efe68b9e67324c283540d0ef7b81b3d41
Reviewed-on: https://go-review.googlesource.com/91636
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 91097 added TestNoCache. However, this
test is failing on Plan 9 because the HOME
environment variable doesn't contain the
home directory where the Go cache is located.
This change fixes the TestNoCache test
by using the home environment variable
instead of HOME on Plan 9.
Fixes#23644.
Change-Id: Icfb7a7a4c2852f159c93032b4081411628a2787f
Reviewed-on: https://go-review.googlesource.com/91216
Run-TryBot: David du Colombier <0intro@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Executing
$ go tool dist test -run=^go_test:cmd/fix$
leaves a number of directories (fix_cgo_typecheck*) in TMPDIR.
Change-Id: Ia5bdc2f7d884333771d50365063faf514ebf6eae
Reviewed-on: https://go-review.googlesource.com/90795
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For example, the following program is valid:
func main() {
fmt.Printf("%[1]d", 1, 2, 3)
}
If any of the formats are indexed, fmt will not complain about unused
extra arguments. See #22867 for more detail.
Make vet follow the same logic, to avoid erroring on programs that would
run without fmt complaining.
Fixes#23564.
Change-Id: Ic9dede5d4c37d1cd4fa24714216944897b5bb7cc
Reviewed-on: https://go-review.googlesource.com/90495
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
vet was quiet for []stringer, but not for [N]stringer. The source of the
problem was how the recursive call used .Elem().Underlying() for arrays,
but .Elem() for slices. In the first case, the named type is dropped,
thus losing all information of attached methods.
Be consistent across slices and arrays, by dropping the Underlying call
that is causing trouble. Add regression tests too, including cases where
the element type does not implement fmt.Stringer.
Fixes#23552.
Change-Id: I0fde07d101f112d5768be0a79207ef0b3dc45f2e
Reviewed-on: https://go-review.googlesource.com/90455
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
vet recorded what types had String methods defined on them, but it did
not record whether the receivers were pointer types. That information is
important, as the following program is valid:
type T string
func (t *T) String() string {
return fmt.Sprint(&t) // prints address
}
Teach vet that, if *T is Stringer, **T is not.
Fixes#23550.
Change-Id: I1062e60e6d82e789af9cca396546db6bfc3541e8
Reviewed-on: https://go-review.googlesource.com/90417
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The problem is that vet complains about 0 as a Printf flag in some
situations where fmt allows it but probably shouldn't. The two
need to be brought in line, but it's too late in the release cycle.
The situation is messy and should be resolved properly in 1.11. This
CL is a simple fix to disable a spurious complaint for 1.10 that will be
resolved in a more thorough way in 1.11.
The workaround is just to be silent about flag 0, as suggested in
issue 23605.
Fixes#23605
Update #23498
Change-Id: Ice1a4f4d86845d70c1340a0a6430d74e5de9afd4
Reviewed-on: https://go-review.googlesource.com/90695
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 13166, CL 13342 and CL 33425 skipped external tests
on freebsd/arm, linux/arm and linux/mips.
This CL does the same for plan9/arm to reduce test time
on plan9/arm and prevent the Go builder to time out.
Change-Id: I16fcc5d8010a354f480673b8c4a8a11dbc833557
Reviewed-on: https://go-review.googlesource.com/90416
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
recover determines whether it's being called by a deferred frame by
matching its caller's argument frame pointer with the one recorded in
the panic object. That means its caller needs a valid and unique
argument frame pointer, so it must not be inlined.
With this fix, test/recover.go passes with -l=4.
Fixes#23557.
Change-Id: I1f32a624c49e387cfc67893a0829bb248d69c3d4
Reviewed-on: https://go-review.googlesource.com/90035
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If you use -coverpkg=all you get coverage for all packages in the build.
Go 1.9 used a global counter for all the GoCover variables, so that they
were distinct for the entire build. The global counter caused problems
with caching, so we switched to a per-package counter. But now the
GoCover_0 in one package may be dot-imported into another and
conflict with the GoCover_0 in that other package.
Reestablish (overwhelmingly likely) global uniqueness of GoCover
variables by appending an _xxxxxxxxxxxx suffix, where the x's are
the prefix of the SHA256 hash of the import path. The point is only
to avoid accidents, not to defeat people determined to break the tools.
Fixes#23432.
Change-Id: I3088eceebbe35174f2eefe8d558b7c8b59d3eeac
Reviewed-on: https://go-review.googlesource.com/89135
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The compiler allows code to have multiple differently-typed views of a
single argument. For instance, if we have
func f(x float64) {
y := *(*int64)(unsafe.Pointer(&x))
...
}
Then in SSA we get two OpArg ops, one with float64 type and one with
int64 type.
The compiler will try to reuse argument slots for spill slots. It
checks that the argument slot is dead by consulting an interference
graph.
When building the interference graph, we normally ignore cross-type
edges because the values on either end of that edge can't be allocated
to the same slot. (This is just a space-saving optimization.) This
rule breaks down when one of the values is an argument, because of the
multiple views described above. If we're spilling a float64, it is not
enough that the float64 version of x is dead; the int64 version of x
has to be dead also.
Remove the optimization of not recording interference edges if types
don't match. That optimization is incorrect if one of the values
connected by the edge is an argument.
Fixes#23522
Change-Id: I361f85d80fe3bc7249014ca2c3ec887c3dc30271
Reviewed-on: https://go-review.googlesource.com/89335
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The current code misassembles VLD1/VST1 instruction with non-zero
offset. The offset is dropped silently without any error message.
The cause of the misassembling is the current code treats argument
(Rn)(Rm) as ZOREG type.
The fix changes the matching rules and considers (Rn)(Rm) as ROFF
type. The fix will report error information when assembles VLD1/VST1
(R8)(R13), [V1.16B].
The fix enables the ARM64Errors test.
Fixes#23448
Change-Id: I3dd518b91e9960131ffb8efcb685cb8df84b70eb
Reviewed-on: https://go-review.googlesource.com/87956
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Except for removing the DRAFT marker, I think these are now ready to go.
Change-Id: I20604f5b135616189a24990db463c7bb5e7d48f1
Reviewed-on: https://go-review.googlesource.com/88975
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When there is no go directory inside the swiglib directory then swig
was installed without Go support. Tests in misc/swig will fail when
swig is installed without Go support.
Add additional checks for the presence of a go directory in the directory
reported by 'swig -go -swiglib' to determine if misc/swig tests should
be run.
This avoids all.bash failing when swig but not swig-go is installed
using macports.
Tested on darwin with swig and with and without swig-go installed
using macports.
Fixes#23469
Change-Id: I173201221554982ea0d9f2bea70a3cb85b297cec
Reviewed-on: https://go-review.googlesource.com/88776
Reviewed-by: David Chase <drchase@google.com>
In earlier versions of Go the "go vet" command would run on regular
source files and test files. That was lost in CL74750. Bring it back.
This required moving a chunk of code from internal/test to
internal/load. The diff looks big but the code is unchanged.
Fixes#23395
Change-Id: Ie9ec183337e8db81c5fc421d118a22b351b5409e
Reviewed-on: https://go-review.googlesource.com/87636
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
On an android/amd64 emulator, $HOME points to / which is not writable.
Ignore the error in the pprof driver test.
With this, androidtest.sh on android/amd64 and android/386 passes.
Upstream pull request https://github.com/google/pprof/pull/295.
Change-Id: If919d7f44530a977fd044631ad01bac87d32deaa
Reviewed-on: https://go-review.googlesource.com/88817
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
When casting between *C.CFTypeRef and *unsafe.Pointer, we used to be
able to do the cast directly. Now with C.CFTypeRef being a uintptr
instead of an unsafe.Pointer, we need an intermediate cast.
Add the insertion of the intermediate cast to the cftype fix module.
Fixes#23091
Change-Id: I891be2f4a08cfd7de1cc4c6ab841b1e0d8c388a6
Reviewed-on: https://go-review.googlesource.com/88175
Reviewed-by: Robert Griesemer <gri@golang.org>
cgo uses the presence of these functions to determine whether
a given type is in the CFTypeRef hierarchy and thus should be
a uintptr instead of a pointer. But if the *GetTypeID functions
aren't used by the user code, then they won't be present in the
cgo output, and thus cmd/fix won't see them.
Use the simpler rule that anything ending in *Ref should be
rewritten. This could over-rewrite, but I don't see a simpler
solution. Unlike cgo, it is easy to edit the output to fix any
issues. And fix is a much rarer operation than cgo.
This is a revert of portions of CL 87616.
Update #23091
Change-Id: I74ecd9fb25490a3d279b372e107248452bb62185
Reviewed-on: https://go-review.googlesource.com/88075
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
If a file uses cgo, incorporate the types generated by running cgo.
Update #23091
Change-Id: I10958fa7fd6027c2c96a9fd8a9658de35439719f
Reviewed-on: https://go-review.googlesource.com/87616
Reviewed-by: Robert Griesemer <gri@golang.org>
Cgo currently maps CFTypeRef and its subtypes to unsafe.Pointer
or a pointer to a named empty struct.
However, Darwin sometimes encodes some of CFTypeRef's subtypes as a
few int fields packed in a pointer wrapper. This hackery confuses the
Go runtime as the pointers can look like they point to things that
shouldn't be pointed at.
Switch CFTypeRef and its subtypes to map to uintptr.
Detecting the affected set of types is tricky, there are over 200 of
them, and the set isn't static across Darwin versions. Fortunately,
downcasting from CFTypeRef to a subtype requires calling CFGetTypeID,
getting a CFTypeID token, and comparing that with a known id from a
*GetTypeID() call. So we can find all the type names by detecting all
the *GetTypeID() prototypes and rewriting the corresponding *Ref types
to uintptr. This strategy covers all the cases I've checked and is
unlikely to have a false positive.
Update #23091.
Change-Id: I487eb4105c9b4785ba564de9c38d472c8c9a76ac
Reviewed-on: https://go-review.googlesource.com/87615
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
I found the previous text choppy and hard to follow, and in putting
this CL together, based entirely on the existing text, I found
several details that seemed misleading to me.
This is my attempt to make the text simultaneously easier to
understand, more complete, and more precise. I may have failed in
all three, but I wanted to try.
Change-Id: I088cb457f6fcad8f2b40236949cc3ac43455e600
Reviewed-on: https://go-review.googlesource.com/87735
Reviewed-by: Russ Cox <rsc@golang.org>
After CL 69831, addTransitiveLinkDeps ensures that all dependencies of
a link appear in Deps. We no longer need to traverse through all
actions to find them. And the old scheme of looking through all the
actions and assuming we would see shared library actions before
libraries they depend on no longer works.
Now that we have complete deps, change to a simpler scheme in which we
find the shared libraries in the deps, and then use that to sort the
deps into archives and shared libraries.
Fixes#22224
Change-Id: I14fcc773ac59b6f5c2965cc04d4ed962442cc89e
Reviewed-on: https://go-review.googlesource.com/87497
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
GCC always recognizes the -fsplit-stack option, but then tests whether
it is supported by the selected target. If not, it reports
cc1: error: ‘-fsplit-stack’ is not supported by this compiler configuration
Check for that error message when deciding whether a compiler option works.
Change-Id: I2eef8d550bbecba3a087869df2c7351280c77290
Reviewed-on: https://go-review.googlesource.com/87136
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
We've had a series of problems with tests unexpectedly (and innocently)
looking at system files that appear to (but don't) change in meaningful ways,
like /dev/null on OS X having a modification time set to the current time.
Cut all these off by only applying file change detection to the local package
root: the GOROOT or specific sub-GOPATH in which the package being tested
is found.
(This means that if you test reads /tmp/x and you change /tmp/x, the cached
result will still be used. Don't do that, or else use -count=1.)
Fixes#23390.
Change-Id: I30b6dd194835deb645a040aea5e6e4f68af09edb
Reviewed-on: https://go-review.googlesource.com/87015
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Given an inlinable method M in package P:
func (r *MyStruct) M(...) {
When M is compiled within its home package, the source position that
the compiler records for 'r' (receiver parameter variable) is
accurate, whereas if M is built as part of the compilation of some
other package (body read from export data), the declaration line
assigned to 'r' will be the line number of the 'import' directive, not
the source line from M's source file.
This inconsistency can cause differences in the size of abstract
parameter DIEs (due to variable-length encoding), which can then in
turn result in bad abstract origin offsets, which in turn triggers
build failures on iOS (dsymutil crashes when it encounters an
incorrect abstract origin reference).
Work around the problem by removing the "declaration line number"
attribute within the abstract parameter abbreviation table entry. The
decl line attribute doesn't contribute a whole lot to the debugging
experience, and it gets rid of the inconsistencies that trigger the
dsymutil crashes.
Updates #23374.
Change-Id: I0fdc8e19a48db0ccd938ceadf85103936f89ce9f
Reviewed-on: https://go-review.googlesource.com/87055
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Suppose you build the Go toolchain in directory A,
move the whole thing to directory B, and then use
it from B to build a new program hello.exe, and then
run hello.exe, and hello.exe crashes with a stack
trace into the standard library.
Long ago, you'd have seen hello.exe print file names
in the A directory tree, even though the files had moved
to the B directory tree. About two years ago we changed
the compiler to write down these files with the name
"$GOROOT" (that literal string) instead of A, so that the
final link from B could replace "$GOROOT" with B,
so that hello.exe's crash would show the correct source
file paths in the stack trace. (golang.org/cl/18200)
Now suppose that you do the same thing but hello.exe
doesn't crash: it prints fmt.Println(runtime.GOROOT()).
And you run hello.exe after clearing $GOROOT from the
environment.
Long ago, you'd have seen hello.exe print A instead of B.
Before this CL, you'd still see hello.exe print A instead of B.
This case is the one instance where a moved toolchain
still divulges its origin. Not anymore. After this CL, hello.exe
will print B, because the linker sets runtime/internal/sys.DefaultGoroot
with the effective GOROOT from link time.
This makes the default result of runtime.GOROOT once again
match the file names recorded in the binary, after two years
of divergence.
With that cleared up, we can reintroduce GOROOT into the
link action ID and also reenable TestExecutableGOROOT/RelocatedExe.
When $GOROOT_FINAL is set during link, it is used
in preference to $GOROOT, as always, but it was easier
to explain the behavior above without introducing that
complication.
Fixes#22155.
Fixes#20284.
Fixes#22475.
Change-Id: Ifdaeb77fd4678fdb337cf59ee25b2cd873ec1016
Reviewed-on: https://go-review.googlesource.com/86835
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The linker has been applying -X options before loading symbols,
meaning that when it sees -X y=z it creates a symbol named y
and initializes its string data to z. The symbol named y is marked
"DUPOK" so that when the actual packages are loaded, no error is
emitted when the real y is seen. The predefined y's data is used
instead of whatever the real y says.
If we define -X y=z and we never load y, then the predefined symbol
is dropped during dead code elimination, but not in shared library
builds. Shared library builds must include all symbols, so we have to
be more careful about not defining symbols that wouldn't have
appeared anyway.
To be more careful, save the -X settings until after all the symbols
are loaded from the packages, and then apply the string changes
to whatever symbols are known (but ignore the ones that were not
loaded at all). This ends up being simpler anyway, since it doesn't
depend on DUPOK magic.
Makes CL 86835 safe.
Fixes#23273.
Change-Id: Ib4c9b2d5eafa97c5a8114401dbec0134c76be54f
Reviewed-on: https://go-review.googlesource.com/86915
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When benchmarks run, they print lines like:
BenchmarkGenericNoMatch-8 3000000 385 ns/op
The first field, padded by spaces and followed by a tab,
is printed when the benchmark begins running.
The rest of the line is printed when the benchmark ends.
Tools and people can watch the timing of these prints
to see which benchmark is running.
To allow tools consuming json output to continue to be
able to see which benchmark is running, this CL adds a
special case to the usual "line at a time" behavior to flush
the benchmark name if it is observed separately from the
rest of the line.
Fixes#23352.
Change-Id: I7b6410698d78034eec18745d7f57b7d8e9575dbb
Reviewed-on: https://go-review.googlesource.com/86695
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This just adds support on ELF systems, which is OK for now since that
is all that gccgo works on.
For the archive file generated by the compiler we add a new file
_buildid.o that has a section .go.buildid containing the build ID.
Using a new file lets us set the SHF_EXCLUDE bit in the section header,
so the linker will discard the section. It would be nicer to use
`objcopy --add-section`, but objcopy doesn't support setting the
SHF_EXCLUDE bit.
For an executable we just use an ordinary GNU build ID. Doing this
required modifying cmd/internal/buildid to look for a GNU build ID,
and use it if there is no other Go-specific note.
This CL fixes a minor bug in gccgoTOolchain.link: it was using .Target
instead of .built, so it failed for a cached file.
This CL fixes a bug reading note segments: the notes are aligned as
reported by the PT_NOTE's alignment field.
Updates #22472
Change-Id: I4d9e9978ef060bafc5b9574d9af16d97c13f3102
Reviewed-on: https://go-review.googlesource.com/85555
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
If a benchmark calls b.Log without failing (without b.Error/b.Fatal/b.FailNow)
then that turns into output very much like a test passing,
except it says BENCH instead of PASS.
Benchmarks failing say FAIL just like tests failing.
Fixes#23346.
Change-Id: Ib188e695952da78057ab4a13f90d49937aa3c232
Reviewed-on: https://go-review.googlesource.com/86396
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
I marked every test that takes more than 0.5 seconds on my machine
as something to run only when not in -short mode, or in -short mode
on the beefy linux/amd64, windows/amd64, and darwin/amd64 builders.
I also shortened a few needlessly-expensive tests where possible.
Cuts the time for go test -short cmd/go from 45s to 15s on my machine.
Should help even more on some of our builders and slower user machines.
Fixes#23287.
Change-Id: I0e36003ef947b0ebe4224a1373731f9fa9216843
Reviewed-on: https://go-review.googlesource.com/86252
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 84735 strengthened the -x test to make sure commands succeed,
using set -e, but the gcc flag tests can fail. Change them to say || true.
Fixes#23337.
Change-Id: I01e4017cb36ceb147b56935c2636de52ce7bdfdb
Reviewed-on: https://go-review.googlesource.com/86239
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If test case framing appears in ordinary test output,
then test2json can get confused. If the fake framing is being
saved with t.Logf/t.Errorf/etc then we can already
distinguish it from real framing, and the code did.
It just forgot to write that framing as output (1-line fix).
If the fake framing is being generated by printing directly
to stdout/stderr, then test2json will simply get confused.
There's not a lot to do at that point (maybe it's even a feature).
Fixes#23036.
Change-Id: I29449c7ace304172b89d8babe23de507c0500455
Reviewed-on: https://go-review.googlesource.com/86238
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
go test -json was inadvertently disabling caching. Fix that.
Fixes#22984.
Change-Id: Ic933a8c8ac00ce8253e934766954b1ccc6ac0cec
Reviewed-on: https://go-review.googlesource.com/84075
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If you have a package p1 with an xtest (package p1_test)
that imports p2, where p2 itself imports p1, then when
trying to do coverage for p1 we need to make sure to
recompile p2. The problem was that the overall package
import graph looked like:
main -> p1_test -> p2 -> p1
Since we were recompiling p1 with coverage, we correctly
figured out that because p2 depends on a package being
recompiled due to coverage, p2 also needs to be split (forked) to
insert the dependency on the modified p1. But then we used
the same logic to split p1_test and main, with the effect that
the changes to p2 and p1_test and main were lost, since the
caller was still holding on to the original main, not the split version.
Change the code to treat main and p1_test as "already split"
and just update them in place.
Fixes#23314.
Change-Id: If7edeca6e39cdaeb5b9380d00b0c7d8c5891f086
Reviewed-on: https://go-review.googlesource.com/86237
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Update rewrite algorithm by coping code from
go/internal/work/buildid:updateBuildID.
Probably, this is not the best option. We could provide high-level API
in cmd/internal/buildid in the future.
Fixes#23181
Change-Id: I336a7c50426ab39bc9998b55c372af61a4fb21a7
Reviewed-on: https://go-review.googlesource.com/84735
Reviewed-by: Russ Cox <rsc@golang.org>
In func TestXxxx(*testing.T) the Xxxx can be anything that can appear
in an identifier, but can't start with a lowercase letter. Clarify the docs.
Fixes#23322
Change-Id: I5c297916981f7e3890ee955d12bc7422a75488e2
Reviewed-on: https://go-review.googlesource.com/86001
Reviewed-by: Rob Pike <r@golang.org>
Commit c2c07c7989 (CL 49331) changed the linker and runtime to always
use 2MB stacks on 64-bit Windows. This is the corresponding change to
make 32-bit Windows always use large (1MB) stacks because it's
difficult to detect when Windows applications will call into arbitrary
C code that may expect a large stack.
This is done as a separate change because it's possible this will
cause too much address space pressure for a 32-bit address space. On
the other hand, cgo binaries on Windows already use 1MB stacks and
there haven't been complaints.
Updates #20975.
Change-Id: I8ce583f07cb52254fb4bd47250f1ef2b789bc490
Reviewed-on: https://go-review.googlesource.com/49610
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
A Select Op could produce a value with upper 32 bits NOT zeroed,
for example, Div32 is lowered to (Select0 (DIVL x y)).
In theory, we could look into the argument of a Select to decide
whether the upper bits are zeroed. As it is late in release cycle,
just disable this optimization for Select for now.
Fixes#23305.
Change-Id: Icf665a2af9ccb0a7ba0ae00c683c9e349638bf85
Reviewed-on: https://go-review.googlesource.com/85736
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
Refactoring to make it slightly easier to add tests,
easier to add variable-printing-support for Delve,
and made naming and tagging more consistent.
No changes to the content of the test itself or when it is
run.
Change-Id: I374815b65a203bd43b27edebd90b859466d1c33b
Reviewed-on: https://go-review.googlesource.com/84979
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
golang.org/cl/81315 attempted to distinguish system goroutines
by examining the function name in the goroutine stack. It assumes that
the information would be available when GoSysBlock or GoInSyscall
events are processed, but it turned out the stack information is
set too late (when the goroutine gets a chance to run).
This change initializes the goroutine information entry when
processing GoCreate event which should be one of the very first
events for the every goroutine in trace.
Fixes#22574
Change-Id: I1ed37087ce2e78ed27c9b419b7d942eb4140cc69
Reviewed-on: https://go-review.googlesource.com/83595
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
My previous fix for issue 23179 was incomplete; it turns out that if
an unnamed parameter is below a specific size threshold, it gets
register-promoted away by the compiler (hence not encountered during
some parts of DWARF inline info processing), but if it is sufficiently
large, it is allocated to the stack as a named variable and treated as
a regular parameter by DWARF generation. Interestingly, something in
the ppc64le build of k8s causes an unnamed parameter to be retained
(where on amd64 it is deleted), meaning that this wasn't caught in my
amd64 testing.
The fix is to insure that "_" params are treated in the same way that
"~r%d" return temps are when matching up post-optimization inlined
routine params with pre-inlining declarations. I've also updated the
test case to include a "_" parameter with a very large size, which
also triggers the bug on amd64.
Fixes#23179.
Change-Id: I961c84cc7a873ad3f8f91db098a5e13896c4856e
Reviewed-on: https://go-review.googlesource.com/84975
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
The current implementation prints a log, "invalid program: unexpected
type for embedded field", when the form *package.ident is embedded in
a struct declaration.
Note that since valid qualified identifiers must be exported, the result
for a valid program does not change.
Change-Id: If8b9d7056c56b6a6c5482eb749168a63c65ef685
Reviewed-on: https://go-review.googlesource.com/84436
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The helper routine for returning pre-inlining parameter declarations
wasn't properly handling the case where you have more than one
parameter named "_" in a function signature; this triggered a map
collision later on when the function was inlined and DWARF was
generated for the inlined routine instance.
Fixes#23179.
Change-Id: I12e5d6556ec5ce08e982a6b53666a4dcc1d22201
Reviewed-on: https://go-review.googlesource.com/84755
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Disable the three linker DWARF tests that invoke the compiler in
non-debug mode on Solaris, since this seems to trigger a split stack
overflow. These can be turned back on once the issue in question is
resolved.
Updates #23168.
Change-Id: I5be1b098e33e8bad3bc234a0964eab1dee7e7954
Reviewed-on: https://go-review.googlesource.com/84655
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Than McIntosh <thanm@google.com>
Exercise of preparing a how-to document motivated me to
clean up some of the stupider wonkier bits. Since this
does not run for test -short, expect no change for trybots,
did pass testing with OSX gdb and a refreshed copy of Delve.
Change-Id: I58edd10599b172c4787ff5f110db078f6c2c81c5
Reviewed-on: https://go-review.googlesource.com/83957
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Location lists are only supported on x86 and amd64, so the
test expecting them failed everywhere else. Make that test
skip unless GOARCH is x86 or amd64.
Change-Id: Id86b34d30c6a0b97e6fa0cd5aca31f51ed84f556
Reviewed-on: https://go-review.googlesource.com/84395
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The default test timeout is 10 minutes if unspecified.
The misc/cgo/testshared test didn't use t.timeout(sec), which respects
GO_TEST_TIMEOUT_SCALE, so all builders got the default 10 minute
timeout. arm5 needs more, though, so specify 10 minutes explicitly,
which will then get scaled accordingly on slower builders.
Change-Id: I19ecfdcd9c865f2b69524484415b8fbd2852718e
Reviewed-on: https://go-review.googlesource.com/84315
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Bonventre <andybons@golang.org>
Change the compiler's DWARF inline info generation to be more careful
about producing consistent instances of abstract function DIEs. The
new strategy is to insure that the only params/variables created in an
abstract subprogram DIE are those corresponding to declarations in the
original pre-inlining version of the code. If a concrete subprogram
winds up with other vars as part of the compilation process (return
temps, for example, or scalars generated by splitting a structure into
pieces) these are emitted as regular param/variable DIEs instead of
concrete DIEs.
The linker dwarf test now has a couple of new testpoints that include
checks to make sure that all abstract DIE references are
sane/resolvable; this will help catch similar problems in the future.
Fixes#23046.
Change-Id: I9b0030da8673fbb80b7ad50461fcf8c6ac823a37
Reviewed-on: https://go-review.googlesource.com/83675
Run-TryBot: Than McIntosh <thanm@google.com>
Run-TryBot: Heschi Kreinick <heschi@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
cmd/go has grown slow, even in short mode, and it's now regularly
failing on a number of builders where it's taking over the previous 3
minute timeout. for now, give it more time.
Change-Id: If565baf71c2770880b2e2139b47e03433951331f
Reviewed-on: https://go-review.googlesource.com/84235
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Change dump file names to group them alphabetically in directory
listings, in pass run order.
Change-Id: I8070578a5b4a3a7983dcc527ea1cfdb10a6d7d24
Reviewed-on: https://go-review.googlesource.com/83958
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The name-based heuristics fail too often to be on during "go test",
but we really want the printf vet check in "go test", so change to
a list of exactly which standard library functions are print-like.
For a later release we'd like to bring back checking for user-defined
wrappers, but in a completely precise way. Not for Go 1.10, though.
The new, more precise list includes t.Skipf, which caught some
mistakes in standard library tests.
Fixes#22936.
Change-Id: I110448e3f6b75afd4327cf87b6abb4cc2021fd0d
Reviewed-on: https://go-review.googlesource.com/83838
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Two minor changes to allow fixes in cmd/vet's printf checking.
1. Pass package import path in vet config, so that vet knows
whether it is, for example, vetting "fmt".
2. Add new, but undocumented and for now unsupported
flag -vettool to control which vet binary is invoked during go vet.
This lets the cmd/vet tests build and test a throwaway vet.exe
using cmd/go to ensure type checking information, all without
installing a potentially buggy cmd/vet.
For #22936.
Change-Id: I18df7c796ebc711361c847c63eb3ee17fb041ff7
Reviewed-on: https://go-review.googlesource.com/83837
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
(This only manifested in test vet failures for packages without tests,
or else we'd probably have seen this sooner.)
Fixes#23047.
Change-Id: I41d09a7780999bbe1951377ffcc811ba86ea5000
Reviewed-on: https://go-review.googlesource.com/83955
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Tests exist that call m.Run in a loop‽
Now we have one too.
Fixes#23129.
Change-Id: I8cbecb724f239ae14ad45d75e67d12c80e41c994
Reviewed-on: https://go-review.googlesource.com/83956
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The export prologue goes into the _cgo_export.h file, where it may be
be #include'd by a .swig file. As SWIG defines its own type "intgo",
the definition of "intgo" in the export prologue could conflict.
Since we don't need to define "intgo" in the _cgo_export.h file, don't.
Defining "intgo" in _cgo_export.h was new for this release, so this
should not break any existing code.
No test case as I can't quite bring myself to write a test that
combines SWIG and cgo.
Change-Id: I8073e8300a1860cecd5994b9ad07dd35a4298c89
Reviewed-on: https://go-review.googlesource.com/83936
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
If package strings has a particular set of gcflags, then the strings_test
pseudo-package built as part of the test binary started inheriting the
same flags in CL 81496, to fix#22831.
Now the package main and final test binary link built as part of the
strings test binary also inherit the same flags, to fix#22994.
I am slightly uneasy about reusing package strings's flags for
package main, but the alternative would be to introduce some
kind of special case, which I'd be even more uneasy about.
This interpretation preserves the Go 1.9 behavior of existing
commands like:
go test -c -ldflags=-X=mypkg.debugString=foo mypkg
Fixes#22994.
Change-Id: I9ab83bf1a9a6adae530a7715b907e709fd6c1b5d
Reviewed-on: https://go-review.googlesource.com/83879
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
An exec command is normally used on platforms were the test is run in
some unusual way, making it less likely that the testlog will be useful.
Updates #22593
Change-Id: I0768f6da89cb559d8d675fdf6d685db9ecedab9e
Reviewed-on: https://go-review.googlesource.com/83578
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We can't currently inline functions that contain closures anyway, so
just delete this budgeting code for now. Re-enable once we can (if
ever) inline functions with nested closures.
Updates #15561.
Fixes#23093.
Change-Id: Idc5f8e042ccfcc8921022e58d3843719d4ab821e
Reviewed-on: https://go-review.googlesource.com/83538
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
When using -importcfg, the import paths recorded by the compiler in
the object file are simply the import paths. When not using -importcfg,
the import paths have a trailing ".a". Assume that if we are using
-importcfg with the compiler, we are using it with the linker,
and so if the linker sees an -importcfg option it should not
strip ".a" from the import path read from the object files.
This was mostly working because the linker only strips a trailing
".x" for a literal dot and any single character 'x'. Since few import
paths end with ".x", most programs worked fine.
Fixes#22986
Change-Id: I6c10a160b97dd63fff3931f27a1514c856e8cd52
Reviewed-on: https://go-review.googlesource.com/81878
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
It causes every test to fail as the log file is on the local file system,
not the NaCl file system.
Updates #22593
Change-Id: Iee3d8307317bd792c9c701baa962ebbbfa34c147
Reviewed-on: https://go-review.googlesource.com/83256
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Instead of requiring that cmd/api/run.go be edited upon each
release to include the next Go version number, look in $GOROOT/api
for files with the prefix go1* and use those instead to perform
API checks.
Change-Id: I5d9407f2bd368ff5e62f487cccdd245641ca9c9b
Reviewed-on: https://go-review.googlesource.com/83355
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When we write a cached test result, we now also write a log of the
environment variables and files inspected by the test run,
along with a hash of their content. Before reusing a cached test result,
we recompute the hash of the content specified by the log, and only
use the result if that content has not changed.
This makes test caching behave correctly for tests that consult
environment variables or stat or read files or directories.
Fixes#22593.
Change-Id: I8608798e73c90e0c1911a38bf7e03e1232d784dc
Reviewed-on: https://go-review.googlesource.com/81895
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The package unsafe docs say it's safe to convert an unsafe.Pointer to
uintptr in the argument list to an assembly function, but it was
erroneously only detecting normal pointers converted to unsafe.Pointer
and then to intptr.
Fixes#23051.
Change-Id: Id1be19f6d8f26f2d17ba815191717d2f4f899732
Reviewed-on: https://go-review.googlesource.com/82817
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The jobject type is declared as a pointer, but some JVMs
(Dalvik, ART) store non-pointer values in them. In Go, we must
use uintptr instead of a real pointer for these types.
This is similar to the CoreFoundation types on Darwin which
were "fixed" in CL 66332.
Update #22906
Update #21897
RELNOTE=yes
Change-Id: I0d4c664501d89a696c2fb037c995503caabf8911
Reviewed-on: https://go-review.googlesource.com/81876
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Pointer arithemetic is done mod 2^32 on 386, so we can just
drop the high bits of any large constant offsets.
The bounds check will make sure wraparounds are never observed.
Fixes#21655
Change-Id: I68ae5bbea9f02c73968ea2b21ca017e5ecb89223
Reviewed-on: https://go-review.googlesource.com/82675
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
The DWARF inline info generation code was using file/line/column (from
src.Pos) as a means of matching up pre- and post-optimization variable
nodes. This turns out to be problematic since it looks as though
distinct formals on the same line can be assigned the same column
number. Work around this issue by adding variable names to the
disambiguation code. Added a testpoint to the linker DWARF test that
checks to make sure each abstract origin offset of distinct within a
given DWARF DW_AT_inlined_routine body.
Fixes#23020.
Change-Id: Ie09bbe01dc60822d84d4085547b138e644036fb3
Reviewed-on: https://go-review.googlesource.com/82396
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Sometimes people use run.bash repeatedly
or run go tool dist test by hand for cgo tests.
Avoid test caching in that case, by request.
Refactor code so that all go test commands
share a common prefix.
If not caching is problematic it will be a one-line
change to turn caching back on.
Fixes#22758.
Change-Id: I17d721b832d97bffe26629d21f85b05dbbf2b3ec
Reviewed-on: https://go-review.googlesource.com/80735
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Make sure that when we're assigning to a map, we evaluate the
right-hand side before we attempt to insert into the map.
We used to evaluate the left-hand side to a pointer-to-slot-in-bucket
(which as a side effect does len(m)++), then evaluate the right-hand side,
then do the assignment. That clearly isn't correct when the right-hand side
might panic.
Fixes#22881
Change-Id: I42a62870ff4bf480568c9bdbf0bb18958962bdf0
Reviewed-on: https://go-review.googlesource.com/81817
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Turn off append-to-itself optimization if optimizations are turned off.
This optimization triggered a bug when doing
s = append(s, s)
where we write to the leftmost s before reading the rightmost s.
Update #17039
Change-Id: I21996532d20a75db6ec8d49db50cb157a1360b80
Reviewed-on: https://go-review.googlesource.com/81816
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The DWARF inline info generation hooks weren't properly
handling unused auto vars in certain cases, triggering an assert (now
fixed). Also with this change, introduce a new autom "flavor" to
use for autom entries that are added to insure that a specific
auto type makes it into the linker (this is a follow-on to the fix
for 22941).
Fixes#22962.
Change-Id: I7a2d8caf47f6ca897b12acb6a6de0eb25f5cac8f
Reviewed-on: https://go-review.googlesource.com/81557
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The whole GOROOT/pkg tree is installed using the GOHOSTOS/GOHOSTARCH
toolchain (installed in GOROOT/pkg/tool/GOHOSTOS_GOHOSTARCH).
The testgo.exe we run during the cmd/go test will be built
for GOOS/GOARCH, which means it will use the GOOS/GOARCH toolchain
(installed in GOROOT/pkg/tool/GOOS_GOARCH).
If these are not the same toolchain, then the entire standard library
will look out of date to testgo.exe (the compilers in those two different
tool directories are built for different architectures and have different
buid IDs), which will cause many tests to do unnecessary rebuilds
and some tests to attempt to overwrite the installed standard library,
which will in turn make it look out of date to whatever runs after the
cmd/go test exits.
Bail out entirely in this case instead of destroying the world.
The changes outside TestMain are checks that might have caught
this a bit earlier and made it much less confusing to debug.
Fixes#22709.
Fixes#22965.
Change-Id: Ibf28fa19e29a1f1b8f17875f446d3474dd04a924
Reviewed-on: https://go-review.googlesource.com/81516
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If we're using -covermode=atomic with -coverpkg, to add coverage
to more than just the package being tested, then we need to make sure
to make sync/atomic available to the compiler for every package
being recompiled for coverage.
Fixes#22728.
Change-Id: I27f88f6a62e37d4a7455554cd03c8ca2b21f81a4
Reviewed-on: https://go-review.googlesource.com/81497
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The test binaries accept -timeout=0 to mean no timeout,
but then the backup timer in cmd/go kills the test after 1 minute.
Make cmd/go understand this special case and change
behavior accordingly.
Fixes#14780.
Change-Id: I66bf517173a4ad21d53a5ee88d163f04b8929fb6
Reviewed-on: https://go-review.googlesource.com/81499
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Also be clear that go test output is not suitable for piping into test2json.
Fixes#22710.
Fixes#22789.
Change-Id: I3d850c8a2288be7f9a27d638bbf847cb8707dcce
Reviewed-on: https://go-review.googlesource.com/81555
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
1. Apply JSON conversion when -bench is in use.
2. Apply JSON conversion to "no test files" result.
3. Apply JSON conversion to test case-ending SKIP status.
Fixes#22769.
Fixes#22790.
Change-Id: I67ad656fc58bacae8c51d23b1e6d543cad190f08
Reviewed-on: https://go-review.googlesource.com/81535
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The cover variable indices could vary from build to build,
but they were not included in the build ID hash, so that
reusing the previously built package was not safe.
Make the indices no longer vary from build to build,
so that caching is safe.
Fixes#22652.
Change-Id: Ie26d73c648aadd285f97e0bf39619cabc3da54f2
Reviewed-on: https://go-review.googlesource.com/81515
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For Go 1.10, works around a go/types bug that can't typecheck
a corner-case type cycle. Once we are confident that bugs like
this are gone from go/types then we can stop ignoring these
failures.
For #22890.
Change-Id: I38da57e01a0636323e1af4484c30871786125df3
Reviewed-on: https://go-review.googlesource.com/81500
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Earlier versions of Go were not very picky about leading spaces
in the -gcflags values. Make the new pattern-enhanced parser
equally lax.
Fixes#22943.
Change-Id: I5cf4d3e81412e895a4b52af325853ed48d0b73f4
Reviewed-on: https://go-review.googlesource.com/81498
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The number of threads in syscall presented by execution tracer's
trace view includes not only the threads calling system calls on behalf
of user created goroutines, but also those running on behalf of system
goroutines.
When the number of such system goroutines was small, the graph was
useful when examining where a program was saturating the CPU.
But as more and more system goroutines are invloved the graph became
less useful for the purpose - for example, after golang.org/cl/34784,
the timer goroutines dominate in the graph with large P
because the runtime creates per-P timer goroutines.
This change excludes the threads in syscall on behalf of runtime (system
goroutines) from the visualization. Alternatively, I could visualize the
count of such threads in a separate counter but in the same graph.
Given that many other debug endpoints (e.g. /debug/pprof/goroutine) hide
the system goroutines, including them in the same graph can confuse users.
Update #22574
Change-Id: If758cd6b9ed0596fde9a471e846b93246580b9d5
Reviewed-on: https://go-review.googlesource.com/81315
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Hyang-Ah Hana Kim <hyangah@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Per the decision for #14844, index expressions that are non-constant
shifts where the LHS operand is representable as an int are now valid.
Fixes#21693.
Change-Id: Ifafad2c0c65975e0200ce7e28d1db210e0eacd9d
Reviewed-on: https://go-review.googlesource.com/81277
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
If package strings has a particular set of gcflags, then the strings_test
pseudo-package built as part of the test binary should inherit the same flags.
Fixes#22831.
Change-Id: I0e896b6c0f1063454300b7323f577feffbd6650b
Reviewed-on: https://go-review.googlesource.com/81496
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If the build of the test binary failed, the go command correctly
avoided running the binary, but the -x output indicated otherwise.
Fixes#22659.
Change-Id: Ib4d262bf1735f057c994a45fc23c499d4ebe3246
Reviewed-on: https://go-review.googlesource.com/81495
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The CL introducing merged handling of cover profiles
did not correctly account for the fact that the file name argument
to -coverprofile is required to be interpreted relative to
the -outputdir argument.
Fixes#22804.
Change-Id: I804774013c12187313b8fd2044302978bdbb6697
Reviewed-on: https://go-review.googlesource.com/81455
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The code that generates the list of DWARF variables for a function
(params and autos) will emit a "no-location" entry in the DWARF for a
user var that appears in the original pre-optimization version of the
function but is no longer around when optimization is complete. The
intent is that if a GDB user types "print foo" (where foo has been
optimized out), the response will be "<optimized out>" as opposed to
"there is no such variable 'foo'). This change fixes said code to
include vars on the autom list for the function, to insure that the
type symbol for the variable makes it to the linker.
Fixes#22941.
Change-Id: Id29f1f39d68fbb798602dfd6728603040624fc41
Reviewed-on: https://go-review.googlesource.com/81415
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Values must not be copied after the first use.
Using noCopy makes vet complain about copies
even before the first use, which is incorrect
and very frustrating.
Drop it.
Fixes#21504.
Change-Id: Icd3a5ac3fe11e84525b998e848ed18a5d996f45a
Reviewed-on: https://go-review.googlesource.com/80836
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The ssa backend is aggressive about placing constants and
certain other values in the Entry block. It's implausible
that the original line numbers for these constants makes
any sort of sense when it appears to a user stepping in a
debugger, and they're also not that useful in dumps since
entry-block instructions tend to be constants (i.e.,
unlikely to be the cause of a crash).
Therefore, use src.NoXPos for any values that are explicitly
inserted into a function's entry block.
Passes all tests, including ssa/debug_test.go with both
gdb and a fairly recent dlv. Hand-verified that it solves
the reported problem; constructed a test that reproduced
a problem, and fixed it.
Modified test harness to allow injection of slightly more
interesting inputs.
Fixes#22558.
Change-Id: I4476927067846bc4366da7793d2375c111694c55
Reviewed-on: https://go-review.googlesource.com/81215
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This reverts commit 08f19bbde1.
Reason for revert:
The changed transformation takes effect on a larger set
of code snippets than expected.
For example, this:
func foo() {
// Comment
bar()
}
becomes:
func foo() {
// Comment
bar()
}
This is an unintended consequence.
Change-Id: Ifca88d6267dab8a8170791f7205124712bf8ace8
Reviewed-on: https://go-review.googlesource.com/81335
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Joe Tsai <joetsai@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
GOEXPERIMENT is only set during make.bash, so checking the environment
variable isn't effectual. Instead, check the values exposed by objabi.
These experiments look potentially safe, but it seems too late in the
release cycle to try to assuage that. The one exception is frame
pointer experiment, which is trivially safe: it just amounts to
incrementing some stack offsets by PtrSize.
Fixes#22223.
Change-Id: I46dc7c54b1347143d02d6b9635038230cda6d164
Reviewed-on: https://go-review.googlesource.com/80760
Reviewed-by: Russ Cox <rsc@golang.org>
The trace command computes IO, Schedule, Block, and Syscall profiles
by following the unblocking links in the execution trace and summing
up the duration. This change offers variations of those profiles
that include only selected goroutine types. The id parameter takes the
goroutine type - i.e. pc of the goroutine.
The output is available from the /goroutine view. So, users can see
where the goroutines of interest typically block.
Also, these profiles are available for download so users can use
pprof or other tools to interpret the output. This change adds links
for download of global profile in the main page.
Change-Id: I35699252056d164e60de282b0406caf96d629c85
Reviewed-on: https://go-review.googlesource.com/75710
Reviewed-by: Sameer Ajmani <sameer@golang.org>
GOMIPS is a GOARCH=mips{,le} specific option, for a choice between
hard-float and soft-float. Valid values are 'hardfloat' (default) and
'softfloat'. It is passed to the assembler as
'GOMIPS_{hardfloat,softfloat}'.
Note: GOMIPS will later also be used for a choice of MIPS instruction
set (mips32/mips32r2).
Updates #18162
Change-Id: I35417db8625695f09d6ccc3042431dd2eaa756a6
Reviewed-on: https://go-review.googlesource.com/37954
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Fix a typo of "packageshlib" used for generating the link action ID.
Change-Id: Id6d39830908b03de658a58661030c32c592a1da9
Reviewed-on: https://go-review.googlesource.com/80935
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
Compiler and linker changes to support DWARF inlined instances,
see https://go.googlesource.com/proposal/+/HEAD/design/22080-dwarf-inlining.md
for design details.
This functionality is gated via the cmd/compile option -gendwarfinl=N,
where N={0,1,2}, where a value of 0 disables dwarf inline generation,
a value of 1 turns on dwarf generation without tracking of formal/local
vars from inlined routines, and a value of 2 enables inlines with
variable tracking.
Updates #22080
Change-Id: I69309b3b815d9fed04aebddc0b8d33d0dbbfad6e
Reviewed-on: https://go-review.googlesource.com/75550
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
ORANGE node's Right node is the expression it is ranging over,
which is evaluated before the loop. In the escape analysis,
we should walk this node without loop depth incremented.
Fixes#21709.
Change-Id: Idc1e4c76e39afb5a344d85f6b497930a488ce5cf
Reviewed-on: https://go-review.googlesource.com/80740
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
In the x/arch repo, CL 45098 introduced SymLookup type, replacing
the unnamed function type for lookup functions. This affects the
signature of x86asm.GoSyntax. In particular, it cannot convert
one named type, namely lookupFunc, to the other without an
explicit cast. Make lookupFunc unnamed to fix.
Change-Id: I973300d29ef1dbfdbd7fc2429e89c5849e6a7329
Reviewed-on: https://go-review.googlesource.com/80842
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
For "type T = U" we were accidentally emitting a #define for "U__size"
instead of "T__size".
Fixes#22877.
Change-Id: I5ed6757d697753ed6d944077c16150759f6e1285
Reviewed-on: https://go-review.googlesource.com/80759
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Return an error when a user passes -o and -buildmode=exe to build a package
without a main.
Fixes#20017.
Change-Id: I07d49c75e7088a96f00afe18c9faa842c5d71afb
Reviewed-on: https://go-review.googlesource.com/49371
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
When -test.failfast flag is provided to go test,
no new tests get started after the first failure.
Fixes#21700
Change-Id: I0092e72f25847af05e7c8e1b811dcbb65a00cbe7
Reviewed-on: https://go-review.googlesource.com/74450
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Binary import sometimes constructs nodes using functions
that use the global lineno for the Position. This causes
spurious numbers to appear in the assembly and the
debugging output.
Fix (targeted, because late in the cycle): save and restore
lineno around bimport calls known to use lineno-sensitive
functions.
Updates #22600.
(Comment: "This is a weird line to step through")
Change-Id: I9c4094670380609fe4b6696443fb02579521c596
Reviewed-on: https://go-review.googlesource.com/80115
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
typenod is only used for anonymous types, which don't logically have
position information.
Passes toolstash-check.
Updates #19683.
Change-Id: I505424ae980b88c7deed5f23502c3cecb3dc0702
Reviewed-on: https://go-review.googlesource.com/80298
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Found a few functions in cmd/compile that aren't used.
Change-Id: I53957dae6f1a645feb8b95383f0f050964b4f7d4
Reviewed-on: https://go-review.googlesource.com/79975
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Add test that verifies that go command produces executable
that have security attributes of the target directory.
Update #22343
Change-Id: Ieab02381927a2b09bee21c49c043b3298bd088e6
Reviewed-on: https://go-review.googlesource.com/78215
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
In golang.org/cl/74352, the print rules were overhauled to give better
error messages. This also meant adding a regex to find and extract the
used formatting verbs.
However, %v was missed. Add it to the expression, and add a test too.
Fixes#22847.
Change-Id: If117cc364db0cb91373742239b8a626c137642b0
Reviewed-on: https://go-review.googlesource.com/79455
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Similar fix as in CL 60773 for fixing cmd/pack.
Fixes#21703.
Change-Id: I457ed8a3be828fd458abc5c8c1cc766a9f7aab13
Reviewed-on: https://go-review.googlesource.com/79135
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The signature of the mapassign_fast* routines need to distinguish
the pointerness of their key argument. If the affected routines
suspend part way through, the object pointed to by the key might
get garbage collected because the key is typed as a uint{32,64}.
This is not a problem for mapaccess or mapdelete because the key
in those situations do not live beyond the call involved. If the
object referenced by the key is garbage collected prematurely, the
code still works fine. Even if that object is subsequently reallocated,
it can't be written to the map in time to affect the lookup/delete.
Fixes#22781
Change-Id: I0bbbc5e9883d5ce702faf4e655348be1191ee439
Reviewed-on: https://go-review.googlesource.com/79018
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
Fixes VBLENDVP{D/S}, VPBLENDVB encoding for /is4 imm8[7:4]
encoded register operand.
Explanation:
`reg[r]+regrex[r]+1` will yield correct values for 8..15 reg indexes,
but for 0..7 it gives `index+1` results.
There was no test that used lower 8 register with /is4 encoding,
so the bug passed the tests.
The proper solution is to get 4th bit from regrex with a proper shift:
`reg[r]|(regrex[r]<<1)`.
Instead of inlining `reg[r]|(regrex[r]<<1)` expr,
using new `regIndex(r)` function.
Test that reproduces this issue is added to
amd64enc_extra.s test suite.
Bug came from https://golang.org/cl/70650.
Change-Id: I846a25e88d5e6df88df9d9c3f5fe94ec55416a33
Reviewed-on: https://go-review.googlesource.com/78815
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
Relax the 'phi after non-phi' SSA sanity check to allow
RegKill ops interspersed with phi ops in a block. This fixes
a sanity check failure when -dwarflocationlists is enabled.
Updates #22694.
Change-Id: Iaae604ab6f1a8b150664dd120003727a6fb2f698
Reviewed-on: https://go-review.googlesource.com/77610
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
-N does not disable escape analysis. Remove the outdated comment.
Change-Id: I96978b3afd51324b7b4f8035cf4417fb2eac4ebc
Reviewed-on: https://go-review.googlesource.com/79015
Reviewed-by: David Chase <drchase@google.com>
This changes the assembly language output to use the
innermost (instead of outermost) position for line
number and file.
The file is printed separately, only when it changes,
to remove redundant and space-consuming noise from the
output.
Unknown positions have line number "?"
The output format was changed slightly to make it
easier to read.
One source of gratuitous variation in debugging output was
removed.
Change-Id: I1fd9c8b0ddd82766488582fb684dce4b04f35723
Reviewed-on: https://go-review.googlesource.com/78895
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Go's DWARF usually has absolute paths, in which case DW_AT_comp_dir
doesn't matter. But the -trimpath flag produces relative paths, and
then the spec says that they are relative to _comp_dir.
There's no way to know what the "right" value of _comp_dir is without
more user input, but we can at least leave the paths alone rather than
making them absolute.
After this change, Delve can find sources to a program built with
-gcflags=-trimpath=$(pwd) as long as it's run in the right directory.
Change-Id: I8bc7bed098e352d2c06800bfbbe14e8392e1bbed
Reviewed-on: https://go-review.googlesource.com/78415
Run-TryBot: Heschi Kreinick <heschi@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
The arguments <pstatefield> is a struct that includes two elements,
element reg is special register, elememt enc is pstate field values.
The current code compares two different type values and get a incorrect
result.
The fix follows pstate field to create a systemreg struct,
each system register has a vaule to use in instruction.
Uncomment the msr/mrs cases.
Fixes#21464
Change-Id: I1bb1587ec8548f3e4bd8d5be4d7127bd10d53186
Reviewed-on: https://go-review.googlesource.com/56030
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Improve the error message for wrong
case-field names in composite literals,
by mentioning the correct field name.
Given the program:
package main
type it struct {
ID string
}
func main() {
i1 := &it{id: "Bar"}
}
just like we do for usage of fields, we now
report wrongly cased fields as hints to give:
ts.go:8:14: unknown field 'id' in struct literal of type it (but does have ID)
instead of before:
ts.go:8:14: unknown field 'id' in struct literal of type it
Fixes#22794
Change-Id: I18cd70e75817025cb1df083503cae306e8d659fd
Reviewed-on: https://go-review.googlesource.com/78545
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
When instruction has only one argument, Go parser saves the
argument value into prog.From without any special handling.
But assembler gets the argument value from prog.To.
The fix adds special handling for CLREX and puts other instructions
arguments value into prog.From.
Uncomment hlt/hvc/smc/brk/dcps1/dcps2/dcps3/clrex test cases.
Fixes#20765
Change-Id: I1fc0d2faafb19b537cab5a665bd4af56c3a2c925
Reviewed-on: https://go-review.googlesource.com/78275
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
That can occur if we have -u set and there is an upper- and lower-case
name of the same spelling in a single declaration.
A rare corner case but easy to fix.
Fix by remembering what we've printed.
Fixes#21797.
Change-Id: Ie0b681ae8c277fa16e9635ba594c1dff272b8aeb
Reviewed-on: https://go-review.googlesource.com/78715
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In golang.org/cl/59413, the two-argument behavior of cmd/doc was changed
to use findPackage instead of build.Import, meaning that the tool was
more consistent and useful.
However, it introduced a regression:
$ go doc bytes Foo
doc: no such package: bytes
This is because the directory list search would not find Foo in bytes,
and reach the end of the directory list - thus resulting in a "no such
package" error, since no directory matched our first argument.
Move the "no such package" error out of parseArgs, so that the "loop
until something is printed" loop can have control over it. In
particular, it is useful to know when we have reached the end of the
list without any exact match, yet we did find one package matching
"bytes":
$ go doc bytes Foo
doc: no symbol Foo in package bytes
While at it, make the "no such package" error not be fatal so that we
may test for it. It is important to have the test, as parseArgs may now
return a nil package instead of exiting the entire program, potentially
meaning a nil pointer dereference panic.
Fixes#22810.
Change-Id: I90cc6fd755e2d1675bea6d49a1c13cc18ac9bfb9
Reviewed-on: https://go-review.googlesource.com/78677
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Also, this commit adds a test for ensuring that TestMain(t *testing.T) is a normal test.
Fixes#22388
Change-Id: Iffcb1db5cdcf34b9c822fcdb58f8926535415177
Reviewed-on: https://go-review.googlesource.com/72591
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
They were added in CL 78175 but doesn't run on Android (yet). Skip
them for now.
For the Android builders.
Change-Id: I3b4bfe1f0d820ab98cf50aaab1ee2fad1a44a851
Reviewed-on: https://go-review.googlesource.com/78615
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Copying ensures that we respect the NTFS permissions of the parent folder.
I don't know if there is a way to tell when it is safe to simply rename.
Fixes#22343
Change-Id: I424bfe655b53b0e0fe425ce92bbc15450d52d851
Reviewed-on: https://go-review.googlesource.com/72910
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
In a previous change to cmd/dist/test.go to fix some pie
testcases, a few other tests were incorrectly dropped.
This returns the testcases that shouldn't have been removed.
Fixes#22708
Change-Id: I2f735f4fd3a378f0f45d12a99768638aeb4787c7
Reviewed-on: https://go-review.googlesource.com/77650
Run-TryBot: Russ Cox <rsc@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Some C types are declared as pointers, but C code
stores non-pointers in them. When the Go garbage
collector sees such a pointer, it gets unhappy.
Instead, for these types represent them on the Go
side with uintptr.
We need this change to handle Apple's CoreFoundation
CF*Ref types. Users of these types might need to
update their code like we do in root_cgo_darwin.go.
The only change that is required under normal
circumstances is converting some nils to 0.
A go fix module is provided to help.
Fixes#21897
RELNOTE=yes
Change-Id: I9716cfb255dc918792625f42952aa171cd31ec1b
Reviewed-on: https://go-review.googlesource.com/66332
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
I noticed some files prefixed with ssa_fg_tmp in the /tmp folder of
the s390x builder. runGenTest (a helper for TestGenFlowGraph) wasn't
deleting its temporary files. The distinct prefix made this easy to
figure out.
Change-Id: If0d608aaad04a414e74e29f027ec9443c626e4eb
Reviewed-on: https://go-review.googlesource.com/78475
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Enables AVX2 gather instructions and VSIB support,
which makes vm32{x,y} vm64{x,y} operands encodable.
AXXX constants placed with respect to sorting order.
New VEX optabs inserted near non-VEX entries to simplify
potential transition to auto-generated VSIB optabs.
Tests go into new AMD64 encoder test file (amd64enc_extra.s)
to avoid unnecessary interactions with auto-generated "amd64enc.s".
Side note: x86avxgen did not produced these instructions
because x86.v0.2.csv misses them.
This also explains why x86 test suite have no AVX2 gather
instructions tests.
List of new instructions:
VGATHERPDP
VGATHERDPS
VGATHERQPD
VGATHERQPS
VPGATHERDD
VPGATHERDQ
VPGATHERQD
VPGATHERQQ
Change-Id: Iac852f3c5016523670bd99de6bec6a48f66fb4f6
Reviewed-on: https://go-review.googlesource.com/77970
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
The locations chosen for racewalking inserted code can
be wrong and thus cause unwanted next/step behavior in
debuggers. Forcing the positions to be unset results in
better behavior.
Test added, and test harness corrected to deal with
changes to gdb's output caused by -racewalk.
Incidental changes in Delve (not part of the usual testing,
but provided because we care about Delve) also reflected
in this CL.
Fixes#22600.
Change-Id: Idd0218afed52ab8c68efd9eabbdff3c92ea2b996
Reviewed-on: https://go-review.googlesource.com/78336
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Alessandro Arzilli <alessandro.arzilli@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Adding s390x to the list of architectures that support c-shared and c-archive.
Required adding load-time initialization (via _rt0_s390x_linux_lib) and adding s390x
to the c-shared and c-archive tests.
Change-Id: I75883b2891c310fe8ce7f08c27b06895c074e123
Reviewed-on: https://go-review.googlesource.com/74910
Reviewed-by: Michael Munday <mike.munday@ibm.com>
I realized this simplification was possible when writing the vet loop
(just above the code being modified here) but never circled back
to make the compiler loop match.
Change-Id: Ic2277d2a4b6d94ea4897cc3615fc1a29f2fb243c
Reviewed-on: https://go-review.googlesource.com/78395
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
CL 61111 disabled the writing of trivial.c in -n mode, which
made -n mode at least inconsistent with regular mode in
how it was testing for flags. We think that both were getting
the same answer, so avoid creating the file in both modes
to make sure.
If this CL turns out to be wrong, then when we revert it we
should make sure that the empty file is written even in -n mode,
because this check affects the command-line flags printed
by other commands in that mode.
Change-Id: I0a050bfc148fe5a9d430a153d7816b2821277f0d
Reviewed-on: https://go-review.googlesource.com/78115
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
(The tests only run when swig is already installed on the local system.)
Change-Id: I172d106a68cfc746a1058f5a4bcf6761bab88912
Reviewed-on: https://go-review.googlesource.com/78175
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Maybe a bad git merge - not sure.
In any event, I do miss the trybots.
Noticed while fixing: change print-to-stderr+panic
to pure panic, just so that the test (which catches the panic)
does not print any errors before passing.
Change-Id: If25153ea64e81066455401110ae7a79c36f2f712
Reviewed-on: https://go-review.googlesource.com/78316
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Ian suggested that since test caching is not expected to be perfect
in all cases, we should allow users to clear the test cache separately
from clearing the entire build cache.
This CL adds 'go clean -testcache' to do that. The implementation
does not actually delete files (for that, use 'go clean -cache').
Instead, it writes down the current time, and future go tests will
ignore any cached test results written before that time.
Change-Id: I4f84065d7dfc2499fa3f203e9ab62e68d7f367c5
Reviewed-on: https://go-review.googlesource.com/78176
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If we're running coverage on a package using cgo, we need to
apply both cmd/cover and cmd/cgo as source transformers.
To date we've applied cgo, then cover.
Cover is very sensitive to the exact character position of
expressions in its input, though, and cgo is not, so swap
them, applying first cover and then cgo.
The only drawback here is that coverage formerly applied
to SWIG-generated cgo files, and now it does not.
I am not convinced anyone depended critically on that,
and probably the later analysis with go tool cover would
have tried to parse the original .swig file as a Go file and
gotten very confused.
Fixes#8726.
Fixes#9212.
Fixes#9479.
Change-Id: I777c8b64f7726cb117d59e03073954abc6dfa34d
Reviewed-on: https://go-review.googlesource.com/77155
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Passing the absolute path to cgo puts the absolute path in the
generated file's //line directives, which then shows that path
in the compiler output, which the go command can then
make relative to the current directory, same as it does for
other compiler output.
Change-Id: Ia2064fea40078c46fd97e3a3b8c9fa1488f913e3
Reviewed-on: https://go-review.googlesource.com/77154
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Cgo has always operated by rewriting the AST and invoking go/printer.
This CL converts it to use the AST to make decisions but then apply
its edits directly to the underlying source text. This approach worked
better in rsc.io/grind (used during the C to Go conversion) and also
more recently in cmd/cover. It guarantees that all comments and
line numbers are preserved exactly.
This eliminates a lot of special concern about comments and
problems with cgo not preserving meaningful comments.
Combined with the CL changing cmd/cover to use the same
approach, it means that the combination of applying cgo and
applying cover still guarantees all comments and line numbers
are preserved exactly.
This sets us up to fix some cgo vs cover bugs by swapping
the order in which they run during the go command.
This also sets up #16623 a bit: the edit list being
accumulated here is nearly exactly what you'd want
to pass to the compiler for that issue.
Change-Id: I7611815be22e7c5c0d4fc3fa11832c42b32c4eb3
Reviewed-on: https://go-review.googlesource.com/77153
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 56950 correctly identified code with checks that were impossible.
But instead of correcting the checks it deleted them.
This CL corrects the code to check what was meant.
Change-Id: Ic89222184ee4fa5cacccae12d750601a9438ac8d
Reviewed-on: https://go-review.googlesource.com/78113
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fix typo in DWARF register config for GOOARCH=x86; was
picking up the AMD64 set, should have been selecting
x86 set.
Change-Id: I9a4c6f1378baf3cb2f0ad8d60f3ee2f24cd5dc91
Reviewed-on: https://go-review.googlesource.com/77990
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
cover -func mode was reporting a coverage for function
declarations without bodies - assembly functions.
Since we are not annotating their code, we have no data
for those functions and should not report them at all.
Fixes#6880.
Change-Id: I4b8cd90805accf61f54e3ee167f54f4dc10c7c59
Reviewed-on: https://go-review.googlesource.com/77152
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Now that cover does not modify the formatting of the original file
or add any newline characters, we can make it print a //line comment
pointing back at the original, and compiler errors and panics will
report accurate line numbers.
Fixes#6329.
Fixes#15757.
Change-Id: I7b0e386112c69beafe69e0d47c5f9e9abc87c0f5
Reviewed-on: https://go-review.googlesource.com/77151
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Even after disabling on 1-CPU systems, builders are still flaking too often.
Unless there are at least 4 CPUs, don't require test interlacing at all.
Fixes#22665 (again).
Change-Id: Ief792c496c1ee70939532e6ca8bef012fe78178e
Reviewed-on: https://go-review.googlesource.com/77310
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Permit the C preamble to use the _GoString_ type. Permit Go code to
pass string values directly to those C types. Add accessors for C
code to retrieve sizes and pointers.
Fixes#6907
Change-Id: I190c88319ec88a3ef0ddb99f342a843ba69fcaa3
Reviewed-on: https://go-review.googlesource.com/70890
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Fixes#22703
The fix was already done by Cherry for defer/go of an interface call (CL 23820).
We just need to do it everywhere.
Change-Id: I0115d22e443931fe1bcce44c93c4d0770b5fd268
Reviewed-on: https://go-review.googlesource.com/77450
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Split typecheckrange into two, separating the bigger chunk of code that
takes care of the range expression. It had to sometimes exit early,
which was done via a goto in the larger func. This lets us simplify many
declarations and the flow of the code. While at it, also replace the
toomany int with a bool.
In the case of walkselect, split it into two funcs too since using a
defer for all the trailing work would be a bit much. It also lets us
simplify the declarations and the flow of the code, since now
walkselectcases has a narrower scope and straightforward signature.
Also replace the gotos in typecheckaste with a lineno defer.
Passes toolstash -cmp on std cmd.
Change-Id: Iacfaa0a34c987c44f180a792c473558785cf6823
Reviewed-on: https://go-review.googlesource.com/72374
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Also, with this change, error locations don't print absolute positions
in [] brackets following positions relative to line directives. To get
the absolute positions as well, specify the -L flag.
Fixes#22660.
Change-Id: I9ecfa254f053defba9c802222874155fa12fee2c
Reviewed-on: https://go-review.googlesource.com/77090
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
cmd/cover rewrites Go source code to add coverage annotations.
The approach to date has been to parse the code to AST, analyze it,
rewrite the AST, and print it back out. This approach fails to preserve
line numbers in the original code and has a very difficult time with
comments, because go/printer does as well.
This CL changes cmd/cover to decide what to modify based on the
AST but to apply the modifications as purely textual substitutions.
In this way, cmd/cover can be sure it never adds or removes a newline
character, nor a comment, so all line numbers and comments are
preserved.
This also allows us to emit a single //line comment at the beginning
of the translated file and have the compiler report errors with
correct line numbers in the original file.
Fixes#6329.
Fixes#15757.
Change-Id: Ia95f6f894bb498e80d1f91fde56cd4a8009d7f9b
Reviewed-on: https://go-review.googlesource.com/77150
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Per discussion with David Chase, need to check GOSSAHASH$n
for increasing n until one is missing. Also if GSHS_LOGFILE is set,
the compiler writes to that file, so arrange never to cache in that case.
Change-Id: I3931b4e296251b99abab9bbbbbdcf94ae8c1e2a6
Reviewed-on: https://go-review.googlesource.com/77111
Reviewed-by: David Chase <drchase@google.com>
It's nice that
go build -gcflags=-m errors
go build -gcflags=-m errors
uses the cache for the second command.
Even nicer is to make the second command
print the same output as the first command.
Fixes#22587.
Change-Id: I64350839f01c86c9a095d9d22f6924cd7a0b9105
Reviewed-on: https://go-review.googlesource.com/77110
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Another one that is possible thanks to the new -trimprefix stringer
flag.
The only subtle difference is that, in the previous version, some values
such as TUNSAFEPTR were stringified as "TUNSAFEPTR" instead of
"UNSAFEPTR". The new String method is always consistent in removing the
"T" prefix.
Passes toolstash -cmp on std cmd.
Change-Id: I68407f391795403dfcbbfa68c813018c0235bbb5
Reviewed-on: https://go-review.googlesource.com/77250
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Marvin Stenger <marvin.stenger94@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Since the slice of names is almost exactly the same as what stringer is
already generating for us.
Passes toolstash -cmp on std cmd.
Change-Id: I3f1e95efc690c0108236689e721627f00f79a461
Reviewed-on: https://go-review.googlesource.com/77190
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
CL 76873 added TestGoTestJSON. However, this test
is only succeeding on SMP machines.
This change skips TestGoTestJSON on uniprocessor machines.
Fixes#22665.
Change-Id: I3989d3331fb71193a25a3f0bbb84ff3e1b730890
Reviewed-on: https://go-review.googlesource.com/77130
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If you run
go test -coverpkg=all fmt
one possible interpretation is that you want coverage for all the
packages involved in the fmt test, not all the packages in the world.
Because coverpkg was previously defined as a list of packages
to be loaded, however, it meant all packages in the world.
Now that the go command has a concept of package notation
being used as a matching filter instead of a direct enumeration,
apply that to -coverpkg, so that -coverpkg=all now has the
more useful filter interpretation.
Fixes#10271.
Fixes#21283.
Change-Id: Iddb77b21ba286d3dd65b62507af27e244865072d
Reviewed-on: https://go-review.googlesource.com/76876
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
It's easy to merge the coverage profiles from the
multiple executed tests, so do that.
Also ensures that at least an empty coverage profile
is always written.
Fixes#6909.
Fixes#18909.
Change-Id: I28b88e1fb0fb773c8f57e956b18904dc388cdd82
Reviewed-on: https://go-review.googlesource.com/76875
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This is already documented in the time.Time package
but people might not look there.
Followup to CL 76872, which I submitted accidentally
(Gerrit has placed the Submit button next to Reply again.)
Change-Id: Ibfd6a4da241982d591a8698282a0c15fe9f2e775
Reviewed-on: https://go-review.googlesource.com/77010
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This CL finally adds one of our longest-requested cmd/go features:
a way for test-running harnesses to access test output in structured form.
In fact the structured json output is more informative than the text
output, because the output from multiple parallel tests can be
interleaved as it becomes available, instead of needing to wait for
the previous test to finish before showing any output from the
next test.
See CL 76872 for the conversion details.
Fixes#2981.
Change-Id: I749c4fc260190af9fe633437a781ec0cf56b7260
Reviewed-on: https://go-review.googlesource.com/76873
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Also add cmd/internal/test2json, the actual implementation,
which will be called directly from cmd/go in addition to being
a standalone command (like cmd/buildid and cmd/internal/buildid).
For #2981.
Change-Id: I244ce36d665f424bbf13f5ae00ece10b705d367d
Reviewed-on: https://go-review.googlesource.com/76872
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
In past releases, whether test output appears on stdout or stderr
has varied depending on exactly how go test was invoked and
also (indefensibly) on the number of CPUs available.
Standardize on standard output for all test output.
This is easy to explain and makes go test | go tool test2json work nicely.
Change-Id: I605641213fbc6c7ff49e1fd38a0f732045a8383d
Reviewed-on: https://go-review.googlesource.com/76871
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Now possible, since stringer just got the -trimprefix flag added.
While at it, simplify a few Op stringifications since we can now use %v,
and no longer have to worry about o<len(opnames).
Passes toolstash -cmp on std cmd.
Fixes#15462.
Change-Id: Icdcde0b0a5eb165d18488918175024da274f782b
Reviewed-on: https://go-review.googlesource.com/76790
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Dave Cheney <dave@cheney.net>
The old code only worked for double-quoted strings, and only checked
that the end of the literal value was \n". This worked most of the time,
except for some strings like "foo\\n", which doesn't actually translate
into a trailing newline when unquoted.
To fix this, unquote the string first and look for a real newline at the
end of it. Ignore errors, as we don't have anything to do with string
literals using back quotes.
Fixes#22613.
Change-Id: I7cf96916dd578b7068216c2051ec2622cce0b740
Reviewed-on: https://go-review.googlesource.com/76194
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
cmd/go/internal/work.Builder.updateBuildID left a file opened.
But opened files cannot be deleted on Windows, so cmd/go just
leaves these files in %TMP% directory.
Close the file so deletion can succeed.
Fixes#22650
Change-Id: Ia3ea62f6ec7208d73972eae2e17fb4a766407914
Reviewed-on: https://go-review.googlesource.com/76810
Reviewed-by: Dave Cheney <dave@cheney.net>
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fix a buglet in the go command support for 'go test -n': check for
nil output buffer in action routine.
Fixes#22644
Change-Id: I2566e3bb3d53d0324c4ddd6fec5d30224bf290df
Reviewed-on: https://go-review.googlesource.com/76710
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
I added this in CL 76024 in order to do compile+link+run. This
is no longer necessary after CL 76551, which changed it back to
"go run". Remove it.
Change-Id: Ifa744d4b2f73f33cad056b24051821e43638cc7f
Reviewed-on: https://go-review.googlesource.com/76690
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The linker will refuse to work on objects larger than
2e9 bytes (see issue #9862 for why).
With this change, the compiler gives a useful error
message explaining this, instead of leaving it to the
linker to give a cryptic message later.
Fixes#1700.
Change-Id: I3933ce08ef846721ece7405bdba81dff644cb004
Reviewed-on: https://go-review.googlesource.com/74330
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The recent vendored pprof update broke the iOS builders. The issue was
reported and patched upstream. Re-vendor the internal pprof copy.
Updates vendored pprof to commit 9e20b5b106e946f4cd1df94c1f6fe3f88456628d
from github.com/google/pprof (2017-11-08).
Fixes#22612
Change-Id: I74c46c75e92ce401e605c55e27d8545c0d66082c
Reviewed-on: https://go-review.googlesource.com/76651
Reviewed-by: Elias Naur <elias.naur@gmail.com>
Even if the go command can see that the target is up-to-date
an mtime-based build system invoking the go command may not
be able to tell. Update the mtime to make clear that the target is
up-to-date, and also to hide exactly how smart the go command
is or is not. This keeps users (and programs) from depending on
the exact details of the go command's staleness determination.
Without this I believe we will get a stream of (completely reasonable)
bug reports that "go install (or go test -c) did not update the binary
after I trivially changed the source code or touched a source file".
Change-Id: I920e4aaed2a57319e3c0c37717f872bc059e484e
Reviewed-on: https://go-review.googlesource.com/76590
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
We want test caching to work even for people with scripts
that set a non-default test timeout. But then that raises the
question of what to do about runs with different timeouts:
is a cached success with one timeout available for use when
asked to run the test with a different timeout?
This CL answers that question by saying that the timeout applies
to the overall execution of either running the test or displaying
the cached result, and displaying a cached result takes no time.
So it's always OK to record a cached result, regardless of timeout,
and it's always OK to display a cached result, again regardless of timeout.
Fixes#22633.
Change-Id: Iaef3602710e3be107602267bbc6dba9a2250796c
Reviewed-on: https://go-review.googlesource.com/76552
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: roger peppe <rogpeppe@gmail.com>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
It has always been problematic that there was no way to specify
tool flags that applied only to the build of certain packages;
it was only to specify flags for all packages being built.
The usual workaround was to install all dependencies of something,
then build just that one thing with different flags. Since the
dependencies appeared to be up-to-date, they were not rebuilt
with the different flags. The new content-based staleness
(up-to-date) checks see through this trick, because they detect
changes in flags. This forces us to address the underlying problem
of providing a way to specify per-package flags.
The solution is to allow -gcflags=pattern=flags, which means
that flags apply to packages matching pattern, in addition to the
usual -gcflags=flags, which is now redefined to apply only to
the packages named on the command line.
See #22527 for discussion and rationale.
Fixes#22527.
Change-Id: I6716bed69edc324767f707b5bbf3aaa90e8e7302
Reviewed-on: https://go-review.googlesource.com/76551
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
It needs to refer to packages, so it can no longer be in cfg.
No semantic changes here.
Can now be unexported, so that was a net win anyway.
Change-Id: I58bf6cdcd435e6e019291bb8dcd5d5b7f1ac03a3
Reviewed-on: https://go-review.googlesource.com/76550
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Plain blocks that contain only uninteresting instructions
(that do not have reliable Pos information themselves)
need to have their Pos left unset so that they can
inherit it from their successors. The "uninteresting"
test was not properly applied and not properly defined.
OpFwdRef does not appear in the ssa.html debugging output,
but at the time of the test these instructions did appear,
and it needs to be part of the test.
Fixes#22365.
Change-Id: I99e5b271acd8f6bcfe0f72395f905c7744ea9a02
Reviewed-on: https://go-review.googlesource.com/74252
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Alberto Donizetti
Ben Shi
erifan01
David Chase
Hana Kim
Robert Griesemer
Austin Clements
Heschi Kreinick
Giovanni Bajo
Daniel Martí
Shawn Smith
Ilya Tocar
Ryuma Yoshida
philhofer
Keith Randall
Keith Randall
Kunpei Sakai
Yury Smolsky
Martin Möhrmann
Ian Lance Taylor
Arthur Khashaev
Chad Rosier
Balaram Makam
Matthew Dempsky
Than McIntosh
zaq1tomo
Michael Fraenkel
Carlos Eduardo Seo
Mikio Hara
Cherry Zhang
fanzha02
Nate Wilkinson
Andrew Bonventre
Piyush Mishra
Emmanuel Odeke
Rob Pike
Russ Cox
Michael Hudson-Doyle
David du Colombier
Mohit Agarwal
Elias Naur
Caleb Spare
Brad Fitzpatrick
Agniva De Sarker
Hiroshi Ioka
elpinal
Kevin Burke
Geoff Berry
Joe Tsai
Hana (Hyang-Ah) Kim
Vladimir Stefanovic
Tobias Klauser
Jess Frazelle
Inanc Gumus
Alex Brainman
Keith Randall
isharipo
Wei Xiao
Laurent Voisin
Lynn Boger
Michael Munday
Bill O'Farrell
Chris Hines
Jeff R. Allen