When PSSSaltLength is set, the maximum salt length must equal:
(modulus_key_size - 1 + 7)/8 - hash_length - 2
and for example, with a 4096 bit modulus key, and a SHA-1 hash,
it should be:
(4096 -1 + 7)/8 - 20 - 2 = 490
Previously we'd encounter this error:
crypto/rsa: key size too small for PSS signature
Fixes#42741
Change-Id: I18bb82c41c511d564b3f4c443f4b3a38ab010ac5
Reviewed-on: https://go-review.googlesource.com/c/go/+/302230
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
Run-TryBot: Emmanuel Odeke <emmanuel@orijtech.com>
TryBot-Result: Go Bot <gobot@golang.org>
Fixes#44777
Corrected the documentation comment on the EncryptOAEP function from
'if a given public key is used to decrypt two types of messages' to
'if a given public key is used to encrypt two types of messages'.
Change-Id: I02aff90d0414960eae72352c0e4d8ba2e8f8eca6
GitHub-Last-Rev: ea28663f87
GitHub-Pull-Request: golang/go#45032
Reviewed-on: https://go-review.googlesource.com/c/go/+/301714
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Robert Findley <rfindley@google.com>
Replaced almost every use of Bytes with FillBytes.
Note that the approved proposal was for
func (*Int) FillBytes(buf []byte)
while this implements
func (*Int) FillBytes(buf []byte) []byte
because the latter was far nicer to use in all callsites.
Fixes#35833
Change-Id: Ia912df123e5d79b763845312ea3d9a8051343c0a
Reviewed-on: https://go-review.googlesource.com/c/go/+/230397
Reviewed-by: Robert Griesemer <gri@golang.org>
Cleaned up for readability and consistency.
There is one tiny behavioral change: when PSSSaltLengthEqualsHash is
used and both hash and opts.Hash were set, hash.Size() was used for the
salt length instead of opts.Hash.Size(). That's clearly wrong because
opts.Hash is documented to override hash.
Change-Id: I3e25dad933961eac827c6d2e3bbfe45fc5a6fb0e
Reviewed-on: https://go-review.googlesource.com/c/go/+/226937
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
Per RFC 8017, reject signatures which are not the same length as the RSA
modulus. This matches the behavior of SignPKCS1v15 which properly left pads
the signatures it generates to the size of the modulus.
Fixes#21896
Change-Id: I2c42a0b24cf7fff158ece604b6f0c521a856d932
GitHub-Last-Rev: 6040f79906
GitHub-Pull-Request: golang/go#38140
Reviewed-on: https://go-review.googlesource.com/c/go/+/226203
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This makes all modern public keys in the standard library implement a
common interface (below) that can be used by applications for better
type safety and allows for checking that public (and private keys via
Public()) are equivalent.
interface {
Equal(crypto.PublicKey) bool
}
Equality for ECDSA keys is complicated, we take a strict interpretation
that works for all secure applications (the ones not using the
unfortunate non-constant time CurveParams implementation) and fails
closed otherwise.
Tests in separate files to make them x_tests and avoid an import loop
with crypto/x509.
Re-landing of CL 223754. Dropped the test that was assuming named curves
are not implemented by CurveParams, because it's not true for all
curves, and anyway is not a property we need to test. There is still a
test to check that different curves make keys not Equal.
Fixes#21704Fixes#38035
Reviewed-on: https://go-review.googlesource.com/c/go/+/223754
Reviewed-by: Katie Hockman <katie@golang.org>
Change-Id: I736759b145bfb4f7f8eecd78c324315d5a05385c
Reviewed-on: https://go-review.googlesource.com/c/go/+/225460
Run-TryBot: Filippo Valsorda <filippo@golang.org>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This reverts CL 223754.
Reason for revert: new tests are failing on all longtest builders.
Change-Id: I2257d106c132f3a02c0af6b20061d4f9a8093c4f
Reviewed-on: https://go-review.googlesource.com/c/go/+/225077
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This makes all modern public keys in the standard library implement a
common interface (below) that can be used by applications for better
type safety and allows for checking that public (and private keys via
Public()) are equivalent.
interface {
Equal(crypto.PublicKey) bool
}
Equality for ECDSA keys is complicated, we take a strict interpretation
that works for all secure applications (the ones not using the
unfortunate non-constant time CurveParams implementation) and fails
closed otherwise.
Tests in separate files to make them x_tests and avoid an import loop
with crypto/x509.
Fixes#21704
Change-Id: Id5379c96384a11c5afde0614955360e7470bb1c4
Reviewed-on: https://go-review.googlesource.com/c/go/+/223754
Reviewed-by: Katie Hockman <katie@golang.org>
Gerrit is complaining about pushes that affect these files
and forcing people to use -o nokeycheck, which defeats
the point of the check. Hide the keys from this kind of scan
by marking them explicitly as testing keys.
This is a little annoying but better than training everyone
who ever edits one of these test files to reflexively override
the Gerrit check.
The only remaining keys explicitly marked as private instead
of testing are in examples, and there's not much to do
about those. Hopefully they are not edited as much.
Change-Id: I4431592b5266cb39fe6a80b40e742d97da803a0b
Reviewed-on: https://go-review.googlesource.com/c/go/+/178178
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
I omitted vendor directories and anything necessary for bootstrapping.
(Tested by bootstrapping with Go 1.4)
Updates #27864
Change-Id: I7d9b68d0372d3a34dee22966cca323513ece7e8a
Reviewed-on: https://go-review.googlesource.com/137856
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Code has ended up depending on things like RSA's key generation being
deterministic given a fixed random Reader. This was never guaranteed and
would prevent us from ever changing anything about it.
This change makes certain calls randomly (based on the internal
fastrand) read an extra byte from the random Reader. This helps to
ensure that code does not depend on internal details.
I've not added this call in the key generation of ECDSA and DSA because,
in those cases, key generation is so obvious that it probably is
acceptable to do the obvious thing and not worry about code that depends
on that.
This does not affect tests that use a Reader of constant bytes (e.g. a
zeroReader) because shifting such a stream is a no-op. The stdlib uses
this internally (which is fine because it can be atomically updated if
the crypto libraries change).
It is possible that external tests could be doing the same and would
thus break if we ever, say, tweaked the way RSA key generation worked.
I feel that addressing that would be more effort than it's worth.
Fixes#21915
Change-Id: I84cff2e249acc921ad6eb5527171e02e6d39c530
Reviewed-on: https://go-review.googlesource.com/64451
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Each URL was manually verified to ensure it did not serve up incorrect
content.
Change-Id: I4dc846227af95a73ee9a3074d0c379ff0fa955df
Reviewed-on: https://go-review.googlesource.com/115798
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Currently, the behavior of z.ModInverse(g, n) is undefined
when g and n are not relatively prime. In that case, no
ModInverse exists which can be easily checked during the
computation of the ModInverse. Because the ModInverse does
not indicate whether the inverse exists, there are reimplementations
of a "checked" ModInverse in crypto/rsa. This change removes the
undefined behavior. If the ModInverse does not exist, the receiver z
is unchanged and the return value is nil. This matches the behavior of
ModSqrt for the case where the square root does not exist.
name old time/op new time/op delta
ModInverse-4 2.40µs ± 4% 2.22µs ± 0% -7.74% (p=0.016 n=5+4)
name old alloc/op new alloc/op delta
ModInverse-4 1.36kB ± 0% 1.17kB ± 0% -14.12% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
ModInverse-4 10.0 ± 0% 9.0 ± 0% -10.00% (p=0.008 n=5+5)
Fixes#24922
Change-Id: If7f9d491858450bdb00f1e317152f02493c9c8a8
Reviewed-on: https://go-review.googlesource.com/108996
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Provide the fixed size from the key pair.
Change-Id: I365c8d0f7d915229ef089e46458d4c83273fc648
Reviewed-on: https://go-review.googlesource.com/103876
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The crypto.Signer interface takes pre-hased messages for ECDSA and RSA,
but the argument in the implementations was called “msg”, not “digest”,
which is confusing.
This change renames them to help clarify the intended use.
Change-Id: Ie2fb8753ca5280e493810d211c7c66223f94af88
Reviewed-on: https://go-review.googlesource.com/70950
Reviewed-by: Filippo Valsorda <hi@filippo.io>
The PKCS #1 v2.2 document has been moved to an EMC
website with a new URL. This CL updates the reference to the document to
the new URL.
The new URL is referenced under https://en.wikipedia.org/wiki/PKCS_1Fixes#21642
Change-Id: Ib8738b0c4c3bb9ec427bebea20c4aacd607ba0db
Reviewed-on: https://go-review.googlesource.com/59351
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The current modInverse implementation allocates a big.Int
for the second parameter of GCD, while only the first is needed.
This is unnecessary and can lead to a speed up for optimizations
of GCD where the second parameter is not calculated at all.
Change-Id: I3f042e140ff643311bc3d0b8d192992d4d2c4c70
Reviewed-on: https://go-review.googlesource.com/50531
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filosottile.wiki@gmail.com>
Reviewed-by: Adam Langley <agl@golang.org>
If there are too few primes of the given length then it can be
impossible to generate an RSA key with n distinct primes.
This change approximates the expected number of candidate primes and
causes key generation to return an error if it's unlikely to succeed.
Fixes#16596.
Change-Id: I53b60d0cb90e2d0e6f0662befa64d13f24af51a7
Reviewed-on: https://go-review.googlesource.com/28969
Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The tree's pretty inconsistent about single space vs double space
after a period in documentation. Make it consistently a single space,
per earlier decisions. This means contributors won't be confused by
misleading precedence.
This CL doesn't use go/doc to parse. It only addresses // comments.
It was generated with:
$ perl -i -npe 's,^(\s*// .+[a-z]\.) +([A-Z]),$1 $2,' $(git grep -l -E '^\s*//(.+\.) +([A-Z])')
$ go test go/doc -update
Change-Id: Iccdb99c37c797ef1f804a94b22ba5ee4b500c4f7
Reviewed-on: https://go-review.googlesource.com/20022
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Dave Day <djd@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Named returned values should only be used on public funcs and methods
when it contributes to the documentation.
Named return values should not be used if they're only saving the
programmer a few lines of code inside the body of the function,
especially if that means there's stutter in the documentation or it
was only there so the programmer could use a naked return
statement. (Naked returns should not be used except in very small
functions)
This change is a manual audit & cleanup of public func signatures.
Signatures were not changed if:
* the func was private (wouldn't be in public godoc)
* the documentation referenced it
* the named return value was an interesting name. (i.e. it wasn't
simply stutter, repeating the name of the type)
There should be no changes in behavior. (At least: none intended)
Change-Id: I3472ef49619678fe786e5e0994bdf2d9de76d109
Reviewed-on: https://go-review.googlesource.com/20024
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
In some cases the documentation for functions in this package was
lacking from the beginning and, in order cases, the documentation didn't
keep pace as the package grew.
This change somewhat addresses that.
Updates #13711.
Change-Id: I25b2bb1fcd4658c5417671e23cf8e644d08cb9ab
Reviewed-on: https://go-review.googlesource.com/18486
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
This change adds a check after computing an RSA signature that the
signature is correct. This prevents an error in the CRT computation from
leaking the private key. See references in the linked bug.
benchmark old ns/op new ns/op delta
BenchmarkRSA2048Sign-3 5713305 6225215 +8.96%
Fixes#12453
Change-Id: I1f24e0b542f7c9a3f7e7ad4e971db3dc440ed3c1
Reviewed-on: https://go-review.googlesource.com/17862
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Could go in 1.5, although not critical.
See also #12107
Change-Id: I7f1608b58581d21df4db58f0db654fef79e33a90
Reviewed-on: https://go-review.googlesource.com/13481
Reviewed-by: Dave Cheney <dave@cheney.net>
Change 7c7126cfeb removed the primality
checking in Validate to save CPU time. That check happened to be
filtering out private keys with primes that were zero or one. Without
that filtering, such primes cause a panic when trying to use such a
private key.
This change specifically checks for and rejects primes ≤ 1 in Validate.
Fixes#11233.
Change-Id: Ie6537edb8250c07a45aaf50dab43227002ee7386
Reviewed-on: https://go-review.googlesource.com/11611
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
These were found by grepping the comments from the go code and feeding
the output to aspell.
Change-Id: Id734d6c8d1938ec3c36bd94a4dbbad577e3ad395
Reviewed-on: https://go-review.googlesource.com/10941
Reviewed-by: Aamir Khan <syst3m.w0rm@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
crypto/rand.Reader doesn't ensure that short reads don't happen. This
change contains a couple of fixups where io.ReadFull wasn't being used
with it.
Change-Id: I3855b81f5890f2e703112eeea804aeba07b6a6b8
Reviewed-on: https://go-review.googlesource.com/7645
Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Decrypter is an interface to support opaque private keys that perform
decryption operations. This interface is analogous to the crypto.Signer
interface.
This change introduces the crypto.Decrypter interface and implements
the crypto.Decrypter interface for rsa.PrivateKey with both OAEP and
PKCS#1 v1.5 padding modes.
Change-Id: I433f649f84ed3c2148337d735cafd75f1d94a904
Reviewed-on: https://go-review.googlesource.com/3900
Reviewed-by: Adam Langley <agl@golang.org>
This check is expensive and adversely impacts startup times for some
servers with several, large RSA keys.
It was nice to have, but it's not really going to stop a targetted
attack and was never designed to – hopefully people's private keys
aren't attacker controlled!
Overall I think the feeling is that people would rather have the CPU
time back.
Fixes#6626.
Change-Id: I0143a58c9f22381116d4ca2a3bbba0d28575f3e5
Reviewed-on: https://go-review.googlesource.com/5641
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
SignPSS is documented as allowing opts to be nil, but actually
crashes in that case. This change fixes that.
Change-Id: Ic48ff5f698c010a336e2bf720e0f44be1aecafa0
Reviewed-on: https://go-review.googlesource.com/2330
Reviewed-by: Minux Ma <minux@golang.org>