Unlike function calls, when processing instructions that directly
fault we must not subtract 1 from the pc before looking up the
file/line information.
Since the file/line lookup unconditionally subtracts 1, add 1 to
the faulting instruction PCs to compensate.
Fixes#34123
Change-Id: Ie7361e3d2f84a0d4f48d97e5a9e74f6291ba7a8b
Reviewed-on: https://go-review.googlesource.com/c/go/+/196962
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
This CL adds support of call injection and async preemption on
ARM.
Injected call, like sigpanic, has special frame layout. Teach
traceback to handle it.
Change-Id: I887e90134fbf8a676b73c26321c50b3c4762dba4
Reviewed-on: https://go-review.googlesource.com/c/go/+/202338
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Currently, the process of suspending a goroutine is tied to stack
scanning. In preparation for non-cooperative preemption, this CL
abstracts this into general purpose suspendG/resumeG functions.
suspendG and resumeG closely follow the existing scang and restartg
functions with one exception: the addition of a _Gpreempted status.
Currently, preemption tasks (stack scanning) are carried out by the
target goroutine if it's in _Grunning. In this new approach, the task
is always carried out by the goroutine that called suspendG. Thus, we
need a reliable way to drive the target goroutine out of _Grunning
until the requesting goroutine is ready to resume it. The new
_Gpreempted state provides the handshake: when a runnable goroutine
responds to a preemption request, it now parks itself and enters
_Gpreempted. The requesting goroutine races to put it in _Gwaiting,
which gives it ownership, but also the responsibility to start it
again.
This CL adds several TODOs about improving the synchronization on the
G status. The existing code already has these problems; we're just
taking note of them.
The next CL will remove the now-dead scang and preemptscan.
For #10958, #24543.
Change-Id: I16dbf87bea9d50399cc86719c156f48e67198f16
Reviewed-on: https://go-review.googlesource.com/c/go/+/201137
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
An extra goroutine is necessary to handle asynchronous events on wasm.
However, we do not want this goroutine to exist all the time.
This change makes it short-lived, so it ends after the asynchronous
event was handled.
Fixes#34768
Change-Id: I24626ff0af9d803a01ebe33fbb584d04d2059a44
Reviewed-on: https://go-review.googlesource.com/c/go/+/200497
Run-TryBot: Richard Musiol <neelance@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Part 1: CL 199499 (GOOS nacl)
Part 2: CL 200077 (amd64p32 files, toolchain)
Part 3: stuff that arguably should've been part of Part 2, but I forgot
one of my grep patterns when splitting the original CL up into
two parts.
This one might also have interesting stuff to resurrect for any future
x32 ABI support.
Updates #30439
Change-Id: I2b4143374a253a003666f3c69e776b7e456bdb9c
Reviewed-on: https://go-review.googlesource.com/c/go/+/200318
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
On wasm there is a special goroutine that handles asynchronous events.
Blocking this goroutine often causes a deadlock. However, the stack
trace of this goroutine was omitted when printing the deadlock error.
This change adds an exception so the goroutine is not considered as
an internal system goroutine and the stack trace gets printed, which
helps with debugging the deadlock.
Updates #32764
Change-Id: Icc8f5ba3ca5a485d557b7bdd76bf2f1ffb92eb3e
Reviewed-on: https://go-review.googlesource.com/c/go/+/199537
Run-TryBot: Richard Musiol <neelance@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This reverts CL 180761
Reason for revert: Reinstate the stack-allocated defer CL.
There was nothing wrong with the CL proper, but stack allocation of defers exposed two other issues.
Issue #32477: Fix has been submitted as CL 181258.
Issue #32498: Possible fix is CL 181377 (not submitted yet).
Change-Id: I32b3365d5026600069291b068bbba6cb15295eb3
Reviewed-on: https://go-review.googlesource.com/c/go/+/181378
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This reverts commit fff4f599fe.
Reason for revert: Seems to still have issues around GC.
Fixes#32452
Change-Id: Ibe7af629f9ad6a3d5312acd7b066123f484da7f0
Reviewed-on: https://go-review.googlesource.com/c/go/+/180761
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
When a defer is executed at most once in a function body,
we can allocate the defer record for it on the stack instead
of on the heap.
This should make defers like this (which are very common) faster.
This optimization applies to 363 out of the 370 static defer sites
in the cmd/go binary.
name old time/op new time/op delta
Defer-4 52.2ns ± 5% 36.2ns ± 3% -30.70% (p=0.000 n=10+10)
Fixes#6980
Update #14939
Change-Id: I697109dd7aeef9e97a9eeba2ef65ff53d3ee1004
Reviewed-on: https://go-review.googlesource.com/c/go/+/171758
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Normally, reflect.makeFuncStub records the context value at a known
point in the stack frame, so that the runtime can get the argument map
for reflect.makeFuncStub from that known location.
This doesn't work for defers or goroutines that haven't started yet,
because they haven't allocated a frame or run an instruction yet. The
argument map must be extracted from the context value. We already do
this for defers (the non-nil ctxt arg to getArgInfo), we just need to
do it for unstarted goroutines as well.
When we traceback a goroutine, remember the context value from
g.sched. Use it for the first frame we find.
(We never need it for deeper frames, because we normally don't stop at
the start of reflect.makeFuncStub, as it is nosplit. With this CL we
could allow makeFuncStub to no longer be nosplit.)
Fixes#25897
Change-Id: I427abf332a741a80728cdc0b8412aa8f37e7c418
Reviewed-on: https://go-review.googlesource.com/c/go/+/180258
Reviewed-by: Cherry Zhang <cherryyz@google.com>
If a for loop has a simple condition and begins with a simple
"if x { break; }"; we can simply add "!x" to the loop's condition.
While at it, simplify a few assignments to use the common pattern
"x := staticDefault; if cond { x = otherValue(); }".
Finally, simplify a couple of var declarations.
Change-Id: I413982c6abd32905adc85a9a666cb3819139c19f
Reviewed-on: https://go-review.googlesource.com/c/go/+/165342
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
In 1.11 we stored "return addresses" in the result of runtime.Callers.
I changed that behavior in CL 152537 to store an address in the call
instruction itself. This CL reverts that part of 152537.
The change in 152537 was made because we now store pcs of inline marks
in the result of runtime.Callers as well. This CL will now store the
address of the inline mark + 1 in the results of runtime.Callers, so
that the subsequent -1 done in CallersFrames will pick out the correct
inline mark instruction.
This CL means that the results of runtime.Callers can be passed to
runtime.FuncForPC as they were before. There are a bunch of packages
in the wild that take the results of runtime.Callers, subtract 1, and
then call FuncForPC. This CL keeps that pattern working as it did in
1.11.
The changes to runtime/pprof in this CL are exactly a revert of the
changes to that package in 152537 (except the locForPC comment).
Update #29582
Change-Id: I04d232000fb482f0f0ff6277f8d7b9c72e97eb48
Reviewed-on: https://go-review.googlesource.com/c/156657
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
As a followon to CL 152537, modify the panic-printing traceback
to also handle mid-stack inlining correctly.
Also declare -fm functions (aka method functions) as wrappers, so that
they get elided during traceback. This fixes part 2 of #26839.
Fixes#28640Fixes#24488
Update #26839
Change-Id: I1c535a9b87a9a1ea699621be1e6526877b696c21
Reviewed-on: https://go-review.googlesource.com/c/153477
Reviewed-by: David Chase <drchase@google.com>
Work involved in getting a stack trace is divided between
runtime.Callers and runtime.CallersFrames.
Before this CL, runtime.Callers returns a pc per runtime frame.
runtime.CallersFrames is responsible for expanding a runtime frame
into potentially multiple user frames.
After this CL, runtime.Callers returns a pc per user frame.
runtime.CallersFrames just maps those to user frame info.
Entries in the result of runtime.Callers are now pcs
of the calls (or of the inline marks), not of the instruction
just after the call.
Fixes#29007Fixes#28640
Update #26320
Change-Id: I1c9567596ff73dc73271311005097a9188c3406f
Reviewed-on: https://go-review.googlesource.com/c/152537
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This issue was found by the new vet's nilness check. _defer was already
checked against nil, so don't check it again.
Change-Id: I78725eaec7234b262b3c941e06441ca57f82bdd9
Reviewed-on: https://go-review.googlesource.com/c/148917
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When a function triggers a signal (like a segfault which translates to
a nil pointer exception) during execution, a sigpanic handler is just
below it on the stack. The function itself did not stop at a
safepoint, so we have to figure out what safepoint we should use to
scan its stack frame.
Previously we used the site of the most recent defer to get the live
variables at the signal site. That answer is not quite correct, as
explained in #27518. Instead, use the site of a deferreturn call.
It has all the right variables marked as live (no args, all the return
values, except those that escape to the heap, in which case the
corresponding PAUTOHEAP variables will be live instead).
This CL requires stack objects, so that all the local variables
and args referenced by the deferred closures keep the right variables alive.
Fixes#27518
Change-Id: Id45d8a8666759986c203181090b962e2981e48ca
Reviewed-on: https://go-review.googlesource.com/c/134637
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Currently, isSystemGoroutine varies on whether it considers the
finalizer goroutine a user goroutine or a system goroutine. For the
next CL, we're going to want to always consider the finalier goroutine
a user goroutine, so add a flag that indicates that.
Updates #26903. This is preparation for unifying STW GC and concurrent
GC.
Change-Id: Iafc92e519c13d9f8d879332cb5f0d12164104c33
Reviewed-on: https://go-review.googlesource.com/c/134778
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
During a call to a reflect-generated function or method (via
makeFuncStub or methodValueCall), when should we scan the return
values?
When we're starting a reflect call, the space on the stack for the
return values is not initialized yet, as it contains whatever junk was
on the stack of the caller at the time. The return space must not be
scanned during a GC.
When we're finishing a reflect call, the return values are
initialized, and must be scanned during a GC to make sure that any
pointers in the return values are found and their referents retained.
When the GC stack walk comes across a reflect call in progress on the
stack, it needs to know whether to scan the results or not. It doesn't
know the progress of the reflect call, so it can't decide by
itself. The reflect package needs to tell it.
This CL adds another slot in the frame of makeFuncStub and
methodValueCall so we can put a boolean in there which tells the
runtime whether to scan the results or not.
This CL also adds the args length to reflectMethodValue so the
runtime can restrict its scanning to only the args section (not the
results) if the reflect package says the results aren't ready yet.
Do a delicate dance in the reflect package to set the "results are
valid" bit. We need to make sure we set the bit only after we've
copied the results back to the stack. But we must set the bit before
we drop reflect's copy of the results. Otherwise, we might have a
state where (temporarily) no one has a live copy of the results.
That's the state we were observing in issue #27695 before this CL.
The bitmap used by the runtime currently contains only the args.
(Actually, it contains all the bits, but the size is set so we use
only the args portion.) This is safe for early in a reflect call, but
unsafe late in a reflect call. The test issue27695.go demonstrates
this unsafety. We change the bitmap to always include both args
and results, and decide at runtime which portion to use.
issue27695.go only has a test for method calls. Function calls were ok
because there wasn't a safepoint between when reflect dropped its copy
of the return values and when the caller is resumed. This may change
when we introduce safepoints everywhere.
This truncate-to-only-the-args was part of CL 9888 (in 2015). That
part of the CL fixed the problem demonstrated in issue27695b.go but
introduced the problem demonstrated in issue27695.go.
TODO, in another CL: simplify FuncLayout and its test. stack return
value is now identical to frametype.ptrdata + frametype.gcdata.
Fixes#27695
Change-Id: I2d49b34e34a82c6328b34f02610587a291b25c5f
Reviewed-on: https://go-review.googlesource.com/137440
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
gentraceback handles system stack transitions, but only when they're
done by systemstack(). Handle morestack() too.
I tried to do this generically but systemstack and morestack are
actually *very* different functions. Most notably, systemstack returns
"normally", just messes with $sp along the way. morestack never
returns at all -- it calls newstack, and newstack then jumps both
stacks and functions back to whoever called morestack. I couldn't
think of a way to handle both of them generically. So don't.
The current implementation does not include systemstack on the generated
traceback. That's partly because I don't know how to find its stack frame
reliably, and partly because the current structure of the code wants to
do the transition before the call, not after. If we're willing to
assume that morestack's stack frame is 0 size, this could probably be
fixed.
For posterity's sake, alternatives tried:
- Have morestack put a dummy function into schedbuf, like systemstack
does. This actually worked (see patchset 1) but more by a series of
coincidences than by deliberate design. The biggest coincidence was that
because morestack_switch was a RET and its stack was 0 size, it actually
worked to jump back to it at the end of newstack -- it would just return
to the caller of morestack. Way too subtle for me, and also a little
slower than just jumping directly.
- Put morestack's PC and SP into schedbuf, so that gentraceback could
treat it like a normal function except for the changing SP. This was a
terrible idea and caused newstack to reenter morestack in a completely
unreasonable state.
To make testing possible I did a small redesign of testCPUProfile to
take a callback that defines how to check if the conditions pass to it
are satisfied. This seemed better than making the syntax of the "need"
strings even more complicated.
Updates #25943
Change-Id: I9271a30a976f80a093a3d4d1c7e9ec226faf74b4
Reviewed-on: https://go-review.googlesource.com/126795
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
gentraceback gets the currently running g to do some sanity checks, but
should use gp everywhere to do its actual work. Some noncritical checks
later accidentally used g instead of gp. This seems like it could be a
problem in many different contexts, but I noticed in Windows profiling,
where profilem calls gentraceback on a goroutine from a different
thread.
Change-Id: I3da27a43e833b257f6411ee6893bdece45a9323f
Reviewed-on: https://go-review.googlesource.com/128895
Run-TryBot: Heschi Kreinick <heschi@google.com>
Reviewed-by: Austin Clements <austin@google.com>
The hasprefix function is redundant and can be removed since it has
the same implementation as hasPrefix modulo variable names.
Fixes#25688
Change-Id: I499cc24a2b5c38d1301718a4e66f555fd138386f
Reviewed-on: https://go-review.googlesource.com/115835
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
If we're in a libc call and get a trap, don't try to traceback the libc call.
Start from the state we had at entry to libc.
If there are multiple libc calls outstanding, remember the outermost one.
Fixes#26393
Change-Id: Icfe8794b95bf3bfd1a0679b456dcde2481dcabf3
Reviewed-on: https://go-review.googlesource.com/124195
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Traceback matches the defer stack with the function call stack using
the SP recorded in defer frames when the defer frame is created.
However, on LR machines this is ambiguous: if function A pushes a
defer and then calls function B, where B is a leaf function with a
zero-sized frame, then both A and B have the same SP and will *both*
match the defer on the defer stack. Since traceback unwinds through B
first, it will incorrectly match up the defer with B's frame instead
of A's frame.
Where this goes particularly wrong is if function B causes a signal
that turns into a panic (e.g., a nil pointer dereference). In order to
handle the fact that we may not have a liveness map at the location
that caused the signal and injected a sigpanic call, traceback has
logic to unwind the panicking frame's continuation PC to the PC where
the most recent defer was pushed (this is safe because the frame is
dead other than any defers it pushed). However, if traceback
mis-matches the defer stack, it winds up reporting the B's
continuation PC is in A. If the runtime then uses this continuation PC
to look up PCDATA in B, it will panic because the PC is out of range
for B. This failure mode can be seen in
sync/atomic/atomic_test.go:TestNilDeref. An example failure is:
https://build.golang.org/log/8e07a762487839252af902355f6b1379dbd463c5
This CL fixes all of this by recognizing that a function that pushes a
defer must also have a non-zero-sized frame and using this fact to
refine the defer matching logic.
Fixes the build for arm64, mips, mipsle, ppc64, ppc64le, and s390x.
Fixes#25499.
Change-Id: Iff7c01d08ad42f3de22b3a73658cc2f674900101
Reviewed-on: https://go-review.googlesource.com/114078
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Currently isSystemGoroutine has a hard-coded list of known entry
points into system goroutines. This list is annoying to maintain. For
example, it's missing the ensureSigM goroutine.
Replace it with a check that simply looks for any goroutine with
runtime function as its entry point, with a few exceptions. This also
matches the definition recently added to the trace viewer (CL 81315).
Change-Id: Iaed723d4a6e8c2ffb7c0c48fbac1688b00b30f01
Reviewed-on: https://go-review.googlesource.com/81655
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Every time I poke at #14921, the g.waitreason string
pointer writes show up.
They're not particularly important performance-wise,
but it'd be nice to clear the noise away.
And it does open up a few extra bytes in the g struct
for some future use.
This is a re-roll of CL 99078, which was rolled
back because of failures on s390x.
Those failures were apparently due to an old version of gdb.
Change-Id: Icc2c12f449b2934063fd61e272e06237625ed589
Reviewed-on: https://go-review.googlesource.com/111256
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Munday <mike.munday@ibm.com>
getArgInfo is called a lot during stack copying.
In the common case it doesn't do much work,
but it cannot be inlined.
This change works around that.
name old time/op new time/op delta
StackCopyPtr-8 108ms ± 5% 96ms ± 4% -10.40% (p=0.000 n=20+20)
StackCopy-8 82.6ms ± 3% 78.4ms ± 6% -5.15% (p=0.000 n=19+20)
StackCopyNoCache-8 130ms ± 3% 122ms ± 3% -6.44% (p=0.000 n=20+20)
Change-Id: If7d8a08c50a4e2e76e4331b399396c5dbe88c2ce
Reviewed-on: https://go-review.googlesource.com/108945
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
getcallersp is intrinsified, and so the dummy arg is no longer
needed. Remove it, as well as a few dummy args that are solely
to feed getcallersp.
Change-Id: Ibb6c948ff9c56537042b380ac3be3a91b247aaa6
Reviewed-on: https://go-review.googlesource.com/109596
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, collecting a stack trace via runtime.Stack captures the stack for the
immediately running goroutines. This change extends those tracebacks to include
the tracebacks of their ancestors. This is done with a low memory cost and only
utilized when debug option tracebackancestors is set to a value greater than 0.
Resolves#22289
Change-Id: I7edacc62b2ee3bd278600c4a21052c351f313f3a
Reviewed-on: https://go-review.googlesource.com/70993
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
When there are plugins, there may not be a unique copy of runtime
functions like goexit, mcall, etc. So identifying them by entry
address is problematic. Instead, keep track of each special function
using a field in the symbol table. That way, multiple copies of
the same runtime function will be treated identically.
Fixes#24351Fixes#23133
Change-Id: Iea3232df8a6af68509769d9ca618f530cc0f84fd
Reviewed-on: https://go-review.googlesource.com/100739
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Every time I poke at #14921, the g.waitreason string
pointer writes show up.
They're not particularly important performance-wise,
but it'd be nice to clear the noise away.
And it does open up a few extra bytes in the g struct
for some future use.
Change-Id: I7ffbd52fbc2a286931a2218038fda52ed6473cc9
Reviewed-on: https://go-review.googlesource.com/99078
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Currently, if a sigpanic call is injected into C code, it's possible
for preparePanic to leave the stack in a state where traceback can't
unwind correctly past the sigpanic.
Specifically, shouldPushPanic sniffs the stack to decide where to put
the PC from the signal context. In the cgo case, it will find that
!findfunc(pc).valid() because pc is in C code, and then it will check
if the top of the stack looks like a Go PC. However, this stack slot
is just in a C frame, so it could be uninitialized and contain
anything, including what looks like a valid Go PC. For example, in
https://build.golang.org/log/c601a18e2af24794e6c0899e05dddbb08caefc17,
it sees 1c02c23a <runtime.newproc1+682>. When this condition is met,
it skips putting the signal PC on the stack at all. As a result, when
we later unwind from the sigpanic, we'll "successfully" but
incorrectly unwind to whatever PC was in this uninitialized slot and
go who knows where from there.
Fix this by making shouldPushPanic assume that the signal PC is always
usable if we're running C code, so we always make it appear like
sigpanic's caller.
This lets us be pickier again about unexpected return PCs in
gentraceback.
Updates #23640.
Change-Id: I1e8ade24b031bd905d48e92d5e60c982e8edf160
Reviewed-on: https://go-review.googlesource.com/91137
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently, gentraceback suppresses the "unexpected return pc" error
for sigpanic's caller if the M was running C code.
However, there are various situations where a sigpanic is injected
into C code that can cause traceback to unwind *past* the sigpanic
before realizing that it's in trouble (the traceback beyond the
sigpanic will be wrong).
Rather than try to fix these issues for Go 1.10, this CL simply
disables complaining about unexpected return PCs if we're in cgo
regardless of whether or not they're from the sigpanic frame. Go 1.9
never complained about unexpected return PCs when printing, so this is
simply a step closer to the old behavior.
This should fix the openbsd-386 failures on the dashboard, though this
issue could affect any architecture.
Fixes#23640.
Change-Id: I8c32c1ee86a70d2f280661ed1f8caf82549e324b
Reviewed-on: https://go-review.googlesource.com/91136
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If we're running C code and the code panics, the runtime will inject a
call to sigpanic into the C code just like it would into Go code.
However, the return PC from this sigpanic will be in C code. We used
to silently abort the traceback if we didn't recognize a return PC, so
this went by quietly. Now we're much louder because in general this is
a bad thing. However, in this one particular case, it's fine, so if
we're in cgo and are looking at the return PC of sigpanic, silence the
debug output.
Fixes#23576.
Change-Id: I03d0c14d4e4d25b29b1f5804f5e9ccc4f742f876
Reviewed-on: https://go-review.googlesource.com/90896
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
asmcgocall switches to the system stack and aligns the SP, so
gentraceback both can't unwind over it when it appears on the system
stack (it'll read some uninitialized stack slot as the return PC).
There's also no point in unwinding over it, so don't.
Updates #23576.
Change-Id: Idfcc9599c7636b80dec5451cb65ae892b4611981
Reviewed-on: https://go-review.googlesource.com/90895
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently, if anything goes wrong when printing a traceback, we simply
cut off the traceback without any further diagnostics. Unfortunately,
right now, we have a few issues that are difficult to debug because
the traceback simply cuts off (#21431, #23484).
This is an attempt to improve the debuggability of traceback failure
by printing a diagnostic message plus a hex dump around the failed
traceback frame when something goes wrong.
The failures look like:
goroutine 5 [running]:
runtime: unexpected return pc for main.badLR2 called from 0xbad
stack: frame={sp:0xc42004dfa8, fp:0xc42004dfc8} stack=[0xc42004d800,0xc42004e000)
000000c42004dea8: 0000000000000001 0000000000000001
000000c42004deb8: 000000c42004ded8 000000c42004ded8
000000c42004dec8: 0000000000427eea <runtime.dopanic+74> 000000c42004ded8
000000c42004ded8: 000000000044df70 <runtime.dopanic.func1+0> 000000c420001080
000000c42004dee8: 0000000000427b21 <runtime.gopanic+961> 000000c42004df08
000000c42004def8: 000000c42004df98 0000000000427b21 <runtime.gopanic+961>
000000c42004df08: 0000000000000000 0000000000000000
000000c42004df18: 0000000000000000 0000000000000000
000000c42004df28: 0000000000000000 0000000000000000
000000c42004df38: 0000000000000000 000000c420001080
000000c42004df48: 0000000000000000 0000000000000000
000000c42004df58: 0000000000000000 0000000000000000
000000c42004df68: 000000c4200010a0 0000000000000000
000000c42004df78: 00000000004c6400 00000000005031d0
000000c42004df88: 0000000000000000 0000000000000000
000000c42004df98: 000000c42004dfb8 00000000004ae7d9 <main.badLR2+73>
000000c42004dfa8: <00000000004c6400 00000000005031d0
000000c42004dfb8: 000000c42004dfd0 !0000000000000bad
000000c42004dfc8: >0000000000000000 0000000000000000
000000c42004dfd8: 0000000000451821 <runtime.goexit+1> 0000000000000000
000000c42004dfe8: 0000000000000000 0000000000000000
000000c42004dff8: 0000000000000000
main.badLR2(0x0)
/go/src/runtime/testdata/testprog/badtraceback.go:42 +0x49
For #21431, #23484.
Change-Id: I8718fc76ced81adb0b4b0b4f2293f3219ca80786
Reviewed-on: https://go-review.googlesource.com/89016
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
CL 45412 started hiding autogenerated wrapper functions from call
stacks so that call stack semantics better matched language semantics.
This is based on the theory that the wrapper function will call the
"real" function and all the programmer knows about is the real
function.
However, this theory breaks down in two cases:
1. If the wrapper is at the top of the stack, then it didn't call
anything. This can happen, for example, if the "stack" was actually
synthesized by the user.
2. If the wrapper panics, for example by calling panicwrap or by
dereferencing a nil pointer, then it didn't call the wrapped
function and the user needs to see what panicked, even if we can't
attribute it nicely.
This commit modifies the traceback logic to include the wrapper
function in both of these cases.
Fixes#22231.
Change-Id: I6e4339a652f73038bd8331884320f0b8edd86eb1
Reviewed-on: https://go-review.googlesource.com/76770
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The compiler generates wrapper methods to forward interface method
calls (which are always pointer-based) to value methods. These
wrappers appear in the call stack even though they are an
implementation detail. This leaves ugly "<autogenerated>" functions in
stack traces and can throw off skip counts for stack traces.
Fix this by considering these runtime frames in printed stack traces
so they will only be printed if runtime frames are being printed, and
by eliding them from the call stack expansion used by CallersFrames
and Caller.
This removes the test for issue 4388 since that was checking that
"<autogenerated>" appeared in the stack trace instead of something
even weirder. We replace it with various runtime package tests.
Fixes#16723.
Change-Id: Ice3f118c66f254bb71478a664d62ab3fc7125819
Reviewed-on: https://go-review.googlesource.com/45412
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Now that getcallerpc is a compiler intrinsic on x86 and non-x86
platforms don't need the argument, we can drop it.
Sadly, this doesn't let us remove any dummy arguments since all of
those cases also use getcallersp, which still takes the argument
pointer, but this is at least an improvement.
Change-Id: I9c34a41cf2c18cba57f59938390bf9491efb22d2
Reviewed-on: https://go-review.googlesource.com/65474
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This change has no real effect in itself. This is to prepare for a
followup change that will call lockOSThread during a cgo callback when
there is no p assigned, and therefore when lockOSThread can not use a
write barrier.
Change-Id: Ia122d41acf54191864bcb68f393f2ed3b2f87abc
Reviewed-on: https://go-review.googlesource.com/63630
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
If we're in a situation where printing the fp and sp in the traceback
is useful, it's almost certainly also useful to print the PC.
Change-Id: Ie48a0d5de8a54b5b90ab1d18638a897958e48f70
Reviewed-on: https://go-review.googlesource.com/45210
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The `skip` argument passed to runtime.Caller and runtime.Callers should
be interpreted as the number of logical calls to skip (rather than the
number of physical stack frames to skip). This changes runtime.Callers
to skip inlined calls in addition to physical stack frames.
The result value of runtime.Callers is a slice of program counters
([]uintptr) representing physical stack frames. If the `skip` parameter
to runtime.Callers skips part-way into a physical frame, there is no
convenient way to encode that in the resulting slice. To avoid changing
the API in an incompatible way, our solution is to store the number of
skipped logical calls of the first frame in the _second_ uintptr
returned by runtime.Callers. Since this number is a small integer, we
encode it as a valid PC value into a small symbol called:
runtime.skipPleaseUseCallersFrames
For example, if f() calls g(), g() calls `runtime.Callers(2, pcs)`, and
g() is inlined into f, then the frame for f will be partially skipped,
resulting in the following slice:
pcs = []uintptr{pc_in_f, runtime.skipPleaseUseCallersFrames+1, ...}
We store the skip PC in pcs[1] instead of pcs[0] so that `pcs[i:]` will
truncate the captured stack trace rather than grow it for all i.
Updates #19348.
Change-Id: I1c56f89ac48c29e6f52a5d085567c6d77d499cf1
Reviewed-on: https://go-review.googlesource.com/37854
Run-TryBot: David Lazar <lazard@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Currently almost every function that deals with a *_func has to first
look up the *moduledata for the module containing the function's entry
point. This means we almost always do at least two identical module
lookups whenever we deal with a *_func (one to get the *_func and
another to get something from its module data) and sometimes several
more.
Fix this by making findfunc return a new funcInfo type that embeds
*_func, but also includes the *moduledata, and making all of the
functions that currently take a *_func instead take a funcInfo and use
the already-found *moduledata.
This transformation is trivial for the most part, since the *_func
type is usually inferred. The annoying part is that we can no longer
use nil to indicate failure, so this introduces a funcInfo.valid()
method and replaces nil checks with calls to valid.
Change-Id: I9b8075ef1c31185c1943596d96dec45c7ab5100f
Reviewed-on: https://go-review.googlesource.com/37331
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Now that we don't rescan stacks, stack barriers are unnecessary. This
removes all of the code and structures supporting them as well as
tests that were specifically for stack barriers.
Updates #17503.
Change-Id: Ia29221730e0f2bbe7beab4fa757f31a032d9690c
Reviewed-on: https://go-review.googlesource.com/36620
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The runtime no longer hard-codes the offset of
reflect.methodValue.stack, so remove these obsolete comments. Also,
reflect.methodValue and runtime.reflectMethodValue must also agree
with reflect.makeFuncImpl, so update the comments on all three to
mention this.
This was pointed out by Minux on CL 31138.
Change-Id: Ic5ed1beffb65db76aca2977958da35de902e8e58
Reviewed-on: https://go-review.googlesource.com/34590
Reviewed-by: Keith Randall <khr@golang.org>
Keith Randall
Cherry Zhang
Austin Clements
Richard Musiol
Brad Fitzpatrick
Keith Randall
Keith Randall
Daniel Martí
Tobias Klauser
Ainar Garipov
Zheng Xu
Heschi Kreinick
Martin Möhrmann
Nikhil Benesch
Josh Bleecher Snyder
Eric Daniels
Ian Lance Taylor
David Lazar