compress/flate: avoid large stack growth in fillDeflate

Ranging over an array causes the array to be copied over to the
stack, which cause large re-growths. Instead, we should iterate
over slices of the array.

Also, assigning a large struct literal uses the stack even
though the actual fields being populated are small in comparison
to the entirety of the struct (see #18636).

Fixing the stack growth does not alter CPU-time performance much
since the stack-growth and copying was such a tiny portion of the
compression work:

name                         old time/op    new time/op    delta
Encode/Digits/Default/1e4-8     332µs ± 1%     332µs ± 1%   ~     (p=0.796 n=10+10)
Encode/Digits/Default/1e5-8    5.07ms ± 2%    5.05ms ± 1%   ~       (p=0.815 n=9+8)
Encode/Digits/Default/1e6-8    53.7ms ± 1%    53.9ms ± 1%   ~     (p=0.075 n=10+10)
Encode/Twain/Default/1e4-8      380µs ± 1%     380µs ± 1%   ~     (p=0.684 n=10+10)
Encode/Twain/Default/1e5-8     5.79ms ± 2%    5.79ms ± 1%   ~      (p=0.497 n=9+10)
Encode/Twain/Default/1e6-8     61.5ms ± 1%    61.8ms ± 1%   ~     (p=0.247 n=10+10)

name                         old speed      new speed      delta
Encode/Digits/Default/1e4-8  30.1MB/s ± 1%  30.1MB/s ± 1%   ~     (p=0.753 n=10+10)
Encode/Digits/Default/1e5-8  19.7MB/s ± 2%  19.8MB/s ± 1%   ~       (p=0.795 n=9+8)
Encode/Digits/Default/1e6-8  18.6MB/s ± 1%  18.5MB/s ± 1%   ~     (p=0.072 n=10+10)
Encode/Twain/Default/1e4-8   26.3MB/s ± 1%  26.3MB/s ± 1%   ~     (p=0.616 n=10+10)
Encode/Twain/Default/1e5-8   17.3MB/s ± 2%  17.3MB/s ± 1%   ~      (p=0.484 n=9+10)
Encode/Twain/Default/1e6-8   16.3MB/s ± 1%  16.2MB/s ± 1%   ~     (p=0.238 n=10+10)

Updates #18636
Fixes #18625

Change-Id: I471b20339bf675f63dc56d38b3acdd824fe23328
Reviewed-on: https://go-review.googlesource.com/35122
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

src/compress/flate/deflate.go

@@ -136,14 +136,17 @@ func (d *compressor) fillDeflate(b []byte) int {
 			delta := d.hashOffset - 1
 			d.hashOffset -= delta
 			d.chainHead -= delta
-			for i, v := range d.hashPrev {
+
+			// Iterate over slices instead of arrays to avoid copying
+			// the entire table onto the stack (Issue #18625).
+			for i, v := range d.hashPrev[:] {
 				if int(v) > delta {
 					d.hashPrev[i] = uint32(int(v) - delta)
 				} else {
 					d.hashPrev[i] = 0
 				}
 			}
-			for i, v := range d.hashHead {
+			for i, v := range d.hashHead[:] {
 				if int(v) > delta {
 					d.hashHead[i] = uint32(int(v) - delta)
 				} else {

src/compress/flate/deflate_test.go

@@ -12,6 +12,7 @@ import (
 	"io"
 	"io/ioutil"
 	"reflect"
+	"runtime/debug"
 	"sync"
 	"testing"
 )
@@ -864,3 +865,33 @@ func TestBestSpeedMaxMatchOffset(t *testing.T) {
 		}
 	}
 }
+
+func TestMaxStackSize(t *testing.T) {
+	// This test must not run in parallel with other tests as debug.SetMaxStack
+	// affects all goroutines.
+	n := debug.SetMaxStack(1 << 16)
+	defer debug.SetMaxStack(n)
+
+	var wg sync.WaitGroup
+	defer wg.Wait()
+
+	b := make([]byte, 1<<20)
+	for level := HuffmanOnly; level <= BestCompression; level++ {
+		// Run in separate goroutine to increase probability of stack regrowth.
+		wg.Add(1)
+		go func(level int) {
+			defer wg.Done()
+			zw, err := NewWriter(ioutil.Discard, level)
+			if err != nil {
+				t.Errorf("level %d, NewWriter() = %v, want nil", level, err)
+			}
+			if n, err := zw.Write(b); n != len(b) || err != nil {
+				t.Errorf("level %d, Write() = (%d, %v), want (%d, nil)", level, n, err, len(b))
+			}
+			if err := zw.Close(); err != nil {
+				t.Errorf("level %d, Close() = %v, want nil", level, err)
+			}
+			zw.Reset(ioutil.Discard)
+		}(level)
+	}
+}

src/compress/flate/deflatefast.go

@@ -60,7 +60,7 @@ func newDeflateFast() *deflateFast {
 func (e *deflateFast) encode(dst []token, src []byte) []token {
 	// Ensure that e.cur doesn't wrap.
 	if e.cur > 1<<30 {
-		*e = deflateFast{cur: maxStoreBlockSize, prev: e.prev[:0]}
+		e.resetAll()
 	}
 
 	// This check isn't in the Snappy implementation, but there, the caller
@@ -265,6 +265,21 @@ func (e *deflateFast) reset() {
 
 	// Protect against e.cur wraparound.
 	if e.cur > 1<<30 {
-		*e = deflateFast{cur: maxStoreBlockSize, prev: e.prev[:0]}
+		e.resetAll()
+	}
+}
+
+// resetAll resets the deflateFast struct and is only called in rare
+// situations to prevent integer overflow. It manually resets each field
+// to avoid causing large stack growth.
+//
+// See https://golang.org/issue/18636.
+func (e *deflateFast) resetAll() {
+	// This is equivalent to:
+	//	*e = deflateFast{cur: maxStoreBlockSize, prev: e.prev[:0]}
+	e.cur = maxStoreBlockSize
+	e.prev = e.prev[:0]
+	for i := range e.table {
+		e.table[i] = tableEntry{}
 	}
 }